![[Custom Kryptonian Armored Batman] After the fall of Zod and his army, Bruce Wayne incorporated Kryptonian technology with the help of Clark Kent to create a new form of battle suit in hopes to fight any intergalactic menace that might threaten planet Earth again.
Influenced by the new Man Of Steel film I created this new character by re-sculpting the head, chest and other areas with Epoxy sculpt on a Gears Of War figure and adding a cape from a previous Batman.](userimages/customs/51000/50707-1.jpg) Custom Kryptonian Armored Batman | ![[Berserker] She is purely sculpted with GREENSCULPT! I apologize for the left over green in her elbow joint. when I bent it, it scraped off, even with a protective coat of varnish. Shows that i needed to sand her down! all original articulation remains, even in the head.](userimages/customs/51000/50548-1.jpg) Berserker Gears Of Warby freddytayamShe is purely sculpted with GREENSCULPT! I apologize for the left over green in her elbow joint. when I bent it, it scraped off, even with a protectiv...6 comments |
![[Alicia Valera] Adapted from two figures of Anya. Removing parts of the knee protection to put on the shoulder. Hair patterned adhesive epox.](userimages/customs/50500/50438-1.jpg) Alicia Valera Gears Of Warby pitrosAdapted from two figures of Anya. Removing parts of the knee protection to put on the shoulder. Hair patterned adhesive epox....3 comments | ![[General RAAM] I was never really satisfied with the released gears raam figure he was to small and paint was just ok. I decided to not only make him taller but decided to do a full repaint on him. I extended his legs using pieces of a tharon guard. I then added to his torso and added larger shoulder armor. I then base coat sprayed him with chaos black then dry brush the painted detail. I added accessories and also made a scratch build knife since the one he came with was pretty tiny. Hope you like him.](userimages/customs/48500/48220-1.jpg) General RAAM Gears Of Warby pyramidhead22I was never really satisfied with the released gears raam figure he was to small and paint was just ok. I decided to not only make him taller but dec...2 comments |
![[Gears of War 3.75" Cog Soldier] This is a 3.75" action figure of a Cog Soldier from the "Gears of War" video game. I had originally planned on making Clayton Carmine, but realized that NECA has him listed as being part of their series 1 figures coming later this year. So I opted for a generic Cog Soldier instead.
The head and torso are custom sculpts by Slayer Design Studio, which I cast myself. The upper arms and upper legs are from the Avengers' movie Thor. The gauntlets, hands, thigh armor and lower legs are from a McF HALO figure.](userimages/customs/46500/46182-1.jpg) Gears of War 3.75" Cog Soldier Gears Of Warby starwarsgeekThis is a 3.75" action figure of a Cog Soldier from the "Gears of War" video game. I had originally planned on making Clayton Carmine, ...5 comments | ![[Bennett Daily] Hey there Figure Realm community.
Nemheal here.
Showcasing another Gears of war custom figure creation of mine.
I present you with "Bennett Daily".
A veteran Cog and my 1st ever Gears of war custom figure.
Recipe
Very simple custom to create.
I used the body from a Marcus Fenix series 1 and the head from a WWE Scott Steiner figure.
Some ammo packs, pouches and a frag grenade (with packaging wiring) from various other Gears of war figures and some sticky tape to create the cross on Daily's left chest plate.
This figure although very easy to put together is 1 of my favourite customs and i feel fits in perfectly with the gears of war neca line and the G.O.W universe.
Here's some information about Daily.
Bennett Daily
Occupation: Cog
Age: 35
Height: 5'11
Squad : Zulu Squad
Experience
Daily has been a gear since The Pendulum Wars and in that conflict between man he served for 10 years before retiring 8 months before Emergence day. It was in this 1 year of retirement](userimages/customs/46000/45606-1.jpg) Bennett Daily Gears Of Warby nemhealHey there Figure Realm community.
Nemheal here.
Showcasing another Gears of war custom figure creation of mine.
I present you with "Bennett Da...1 comments |
![[Jayson T. Shad] Hey Figure Realm communinty.
Nemheal here again.
Back with another custom.
This time i bring you "Jayson T Shad".
A soldier in the cog.
To create him i used a torso & arms from wrestling figure "Shad" and the head from wrestling figure "JTG".
The name of this character is a combination of the names of the 2 wrestling figures i used to create him.
A homage if you will and i think the name works nicely.
I attached some ammo from a Marcus Fenix series 2 figure and took the helmet from a Gears Of war 3 Cog soldier.
I am super pleased with this custom i made (quite a while back now) as i feel the result looks wicked.
Let me know your thoughts, feelings and be sure to stay tuned for more customs.
Coming soon.
Nemheal
Peace
:)(:](userimages/customs/46000/45568-1.jpg) Jayson T. Shad Gears Of Warby nemhealHey Figure Realm communinty.
Nemheal here again.
Back with another custom.
This time i bring you "Jayson T Shad".
A soldier in the cog....5 comments | ![[Stranded Soldier] Hey figure custom community.
Nemheal here.
Im a huge fan of Gears of war and the figures that Neca creates for the franchise.
I decided to create a stranded figure as Neca are still yet to make and release any.
The base is from Chris Redfield of Resident Evil. The head is from Dominic Santiago. I Paitned his head and facial hair light brown and gave him red tribal painted marks on his cheeks.
I used sock materials to create a bandanna and a make shift jumper and painted his shoes black along with using wiring from figure packaging to act as makeshift belts for his weapons.
He is fully articulated and can hold his lancer with both hands, unlike some Gears of war figures created by Neca themselves.
Im very pleased with the oustom and plan to make more stranded figures.
Let me know your thoughts and feelings.
Nemheal
Peace
:)(:](userimages/customs/46000/45563-1.jpg) Stranded Soldier Gears Of Warby nemhealHey figure custom community.
Nemheal here.
Im a huge fan of Gears of war and the figures that Neca creates for the franchise.
I decided to create a...0 comments |
![[GOW Berserker V2] This was a commission figure for a boy who saw my first one here on the Realm! His Mom contacted me and said her 9 yr old son is autistic and he was obsessed with the first berserker I made. I was more than happy to do it and even made a special package so he can open it up like a "real" toy on x-mas.:) Used a spawn dessicator head and hands, lucifer body, and tons of aves.](userimages/customs/45500/45257-1.jpg) GOW Berserker V2 Gears Of Warby zim5000This was a commission figure for a boy who saw my first one here on the Realm! His Mom contacted me and said her 9 yr old son is autistic and he was o...8 comments | ![[Martin Sane, Gamma Squad Leader - GEARS of WAR] There are some rumors about a "Gamma Squad", there are some rumors about the Gamma Squad leader. Some say his name was "Martin Sane" but all of his fellows named him "Smart Insane" because after get caught alone in the middle of a battle after the "E-Day" with tons of Locusts and a Berzerker against him, he waited silently over the top of a pile of wastes and just in the right moment jumped on the Berzerker whom desperately tried to take Martin off of her back while she ran from side to side crushing and smashing her horde pals; tons of Drones, some Grenadier Flame Throwers and even some Boomers were killed by the blind lady. It's not clear how many hours stayed Martin over the Berzerker's back but it's said that 8 hours after, the tired Berzerker stopped by a moment, just enough to Martin to jump off her back to a safe place... after that, none is sure of what happened, but one thing is sure, Martin made his decision and took the risk, somethi](userimages/customs/43000/42937-1.jpg) Martin Sane, Gamma Squad Leader - GEARS of WAR Gears Of Warby xGARRIKxThere are some rumors about a "Gamma Squad", there are some rumors about the Gamma Squad leader. Some say his name was "Martin Sane&quo...16 comments |
![[Savage Grenadier Mark.II] YO PEOPLE! Today I am returning with a successful re-do of the Fierce Savage Grenadier.
Personally, I really didn't like how he went the first time; he was lacking in A LOT of his in-game detail, so, with a bit of paint and focus, he was remastered.
First I started by re-coating the ENTIRE body armour in brown mud, then worked on the lighter highlights of sand-ish yellow. Then I moved to the goggles, this time, I replaced them with the canisters from an Anya figure: Painted them black, dry-brushed them in grey and then applied the finer details. The head itself is painted with black stitch-work.
The shoulder pad, forearm pad and rear of the legs were done over in white, and then detailed with Codex Grey. His right arm under the fabric, in-game wise, is covered in thin black cloth. So with extra patience and irritating mistakes (Painting in small places was never my speciality...) His entire right arm under the armour is black.
I then applied the teeth with a grey overcoat to give it](userimages/customs/43000/42894-1.jpg) Savage Grenadier Mark.II Gears Of Warby NecronLord247YO PEOPLE! Today I am returning with a successful re-do of the Fierce Savage Grenadier.
Personally, I really didn't like how he went the first time; h...0 comments | ![[GOW Michael Barrick] Barrick was made with a Marcus base, WWE arms, and sculpted Hoffman head. Aves sculpt for other detail work. He was part of a three-figure set I made to go with Tai and Dizzy.
Having a hard time getting my pics resized. :(](userimages/customs/42000/41670-1.jpg) GOW Michael Barrick Gears Of Warby zim5000Barrick was made with a Marcus base, WWE arms, and sculpted Hoffman head. Aves sculpt for other detail work. He was part of a three-figure set I made ...4 comments |
![[Sam Byrne] this project became A dream of mine a while ago. Since NECA decided not to make my favorite member of delta squad I decided to make one. But I wanted to make this be official so I talked to my sister who is an expert sculptor and we collaborated on our first ever project together.
My part was to create the body for the figure. so I used an NECA anya base figure and took it appart. I used the the legs from A dc arkham city catwoman cause the sculpt was perfect and combined it all together and added paint and accessories.
My sister sculpted the head of Sam sculpting in wax and casting in resin. she then painted it to perfection.
I then added the head when she was done and there you have it A one of A kind sam figure to complete Delta 2's team.](userimages/customs/41500/41156-1.jpg) Sam Byrne Gears Of Warby pyramidhead22this project became A dream of mine a while ago. Since NECA decided not to make my favorite member of delta squad I decided to make one. But I wanted...5 comments | ![[Gears of War Berserker] Been lurking on here for YEARS. Finally was able to get a password etc. (long story) This is an ML Sasquatch base with Hulk movie Abomination feet and hands. Tons of Aves sculpt. Wanted to get as close to a berzerk as I could, but still retain the articulation.](userimages/customs/41000/40920-1.jpg) Gears of War Berserker Gears Of Warby zim5000Been lurking on here for YEARS. Finally was able to get a password etc. (long story) This is an ML Sasquatch base with Hulk movie Abomination feet and...13 comments |
![[Gears of War 3 Dominic Santiago Prototype Custom] dominic Santiago, incredible figure series 1 customisada turning it into a spectacular action figure based on the third part of the incredible game of Gears of War, being the only of its kind, with details done to perfection of character for the third series edited of this epic adventure, I did not paint to show what you can create when you have passion for something, Thanks](userimages/customs/39500/39444-1.jpg) Gears of War 3 Dominic Santiago Prototype Custom Gears Of Warby chief34dominic Santiago, incredible figure series 1 customisada turning it into a spectacular action figure based on the third part of the incredible game of...4 comments | ![[Berserker] hey guys! always wanted a berserker that looked like shed been hit with a hammer of dawn and think neca should make one.....I mean Da Vincis flying machine....really neca? ok sorry got that out of the way hope you like!
Recipe:
Abomination/sculpt/paint/needles](userimages/customs/39000/38885-1.jpg) Berserker Gears Of Warby mattluttonhey guys! always wanted a berserker that looked like shed been hit with a hammer of dawn and think neca should make one.....I mean Da Vincis flying ma...6 comments |
![[Savage Drone] Well folks! Here is the Savage Drone after much waiting and scraping for spare parts, the Savage Drone was born:
- You will first need a Cyclops figure from any series (Mine is from S3, hence crappy articulation!) and clip the back of the helmet till it no longer protrudes to the back of his armour.
- Take a helmet from a Spawn Marauder figure and clip the mouth piece from it and glue to the Cyclops' helmet to cover the mouth and make a gas mask appearance.
- Take the small tank from a Bioshock 2 Subject Delta figure back pack and trim the ends off, then glue to the back mantle of the Cyclops' armour.
- Take the Resi 5 Executioner apron then cut it into strips and glue around the drone's right arm in a close order.
- Cut the pipes from Subject Delta's face and clip to small beads to make the 'thorns' and glue in random places on the left and right arms.
- Paint the entire neck and belly area black to give it a thin cloth covering. when dried apply a line of Scab Red to the belly and v](userimages/customs/38500/38080-1.jpg) Savage Drone Gears Of Warby NecronLord247Well folks! Here is the Savage Drone after much waiting and scraping for spare parts, the Savage Drone was born:
- You will first need a Cyclops figur...1 comments | ![[Savage Grenadier] I was quite shocked to find that nobody here has attempted the fierce and almost feral Savage Locust, so I was like, "What the heck, Let's go for it!" I started by taking a Resident 5 Executioner head before clipping it down to size and then before cutting the old, drab Grenadier Elite's head in half and gluing it on. The goggles came from the 2 clipped ends of a Hammerburst 2.0 Cartridge and the thorns on his head came from a Spawn figure.
The arms, all you really have to do is remove the left shoulder and arm pads, discard the shoulder pad whilst clip down the forearm pad to glue on to the right forearm to give it that covered look, be sure to also pain the right hand black so it looks gloved.
Articulation is the same, Head is on a swivel, shoulders and elbows on swivel/hinges, wrists on swivels, waist on ball joint, thighs have cut joints, and knees have ball joints, be wary of the added fabric on his back though, because if placed wrongly it will seriously mess up the a](userimages/customs/37500/37485-1.jpg) Savage Grenadier Gears Of Warby NecronLord247I was quite shocked to find that nobody here has attempted the fierce and almost feral Savage Locust, so I was like, "What the heck, Let's go for...4 comments |
![[General Raam] as a gears fan i was very disappointed with the Raam figure they released because he is such A huge intimidating character, but NECA scaled him down dramatically. So I wanted to make Raam not only bigger but wanted it to be like he never died at the end of gears 1 so this is like his return appearance. I changed his armor from the silvery purple color and used A theron gaurd base. I attached the head and then changed his arms to A standard drone. I attached armor from A locus Grenadier and then attached the boom shield to his arm. I also made it removeable. To make him taller I removed the theron boots since they are ball jointed and then took a drones thighs and attached them to the therons legs. I repainted them then reatached the theron boots to the drone legs. in all it made him about 2 inches taller than the other gears figures. I then sculpted more upper body to make it look bigger to and then repainted that. I hope you enjoy and thank you for looking.](userimages/customs/37000/36700-1.jpg) General Raam Gears Of Warby pyramidhead22as a gears fan i was very disappointed with the Raam figure they released because he is such A huge intimidating character, but NECA scaled him down d...3 comments | ![[Lucas Carr ( Gears of War Fan Fic.)] Lucas Carr is A seasoned gear and served with Jace Stratton in Echo Squad during the Hollow invasion. He survived the sinking of Jacinto and later joined with the other members of Delta squad under the command of Marcus Fenix. He has tattoos on both of his arms showing his loyalty to the coalition and also wields A customized retro lancer with a under slunge Gnasher shotgun.
To make lucas used A new dom upper body and attached it to A newer cog gear lower body. I then Attached the boots of the new dom figure and added the helmet of A cog Gear figure. For the arms I used A colonial marine hicks figure and attached them to the shoulders of the cog gear figure. I then repainted and added A bunch of Accessories to him. For his custom gun I took A retro lancer added A hammer burst gun barrel to it then cut the bottom of the gun off and added the Gnasher shot gun to make A master key like weapon. Hope you enjoy and thank you for looking.](userimages/customs/37000/36699-1.jpg) Lucas Carr ( Gears of War Fan Fic.) Gears Of Warby pyramidhead22Lucas Carr is A seasoned gear and served with Jace Stratton in Echo Squad during the Hollow invasion. He survived the sinking of Jacinto and later jo...0 comments |
![[Locust Generals] Wanted some custom generals to lead my locust horde hope you like](userimages/customs/36500/36456-1.jpg) Locust Generals | ![[Beserker] hey all been awhile heres my custom beserker I wanted him to look like he had been hit with the hammer a couple of times hope you enjoy any feedback is welcome](userimages/customs/36500/36455-1.jpg) Beserker Gears Of Warby mattluttonhey all been awhile heres my custom beserker I wanted him to look like he had been hit with the hammer a couple of times hope you enjoy any feedback i...2 comments |
![[Brian Griffin] Yo how goes it custom figure enthusiasts. Im back again with another G.O.W custom figure. I like to call this guy "Brian griffin". No particular reason, i just feel the name fits. Also kinda funny as the name is the same as the dog from family guy. As fans will know.
Now what i used. The body is a Gears Of War Victor Hoffman series 5. 1 of the ammo pouches is from a Cole Train Series 1, the other came with the Hoffman figure. The blood is red paint from the war-hammer work shops & The knife & sheath is from Necas Chris Red field of Resident Evil. And as for the scars, i carved them with a scalpel.
Alot of fun to create this badass gear & i feel he has that serious veteran look, which is how i intended him to look, so im pleased.
More G.O.W figure customs coming soon.
cheers 4 viewing.
Nemheal.
Peace.
:)(:](userimages/customs/36000/35852-1.jpg) Brian Griffin Gears Of Warby nemhealYo how goes it custom figure enthusiasts. Im back again with another G.O.W custom figure. I like to call this guy "Brian griffin". No partic...2 comments | ![[Taz Grishento] Hi there figure custom enthusiasts.
Im back uploading my Gears of war figure customs. Expect to see many more from me as ive decided to upload most of my G.O.W FIGURE CUSTOMS.
Heres a custom i like to call "Taz Grishento". Completely due to the fact that this figures head was taken from a "Taz" wrestling figure. The 2nd name i feel just goes.
Now how i made him. The torso and legs are taken from a cog soldier version 1. The arms from a Marcus Fenix series 1. The grey, silver, white & red paints i used were from the war hammer work shops & the knife and sheath glue to back of his belt, were removed from a locust drone.
I found putting this custom together alot of fun and im loving the result. I do plan to eventually paint his neck to match the skin tone on his face, as i feel the tones are too different & come across a little odd.
Feel free to let me know your thoughts & feelings. O and feel free to check out my YOUTUBE channel, where theres](userimages/customs/36000/35843-1.jpg) Taz Grishento Gears Of Warby nemhealHi there figure custom enthusiasts.
Im back uploading my Gears of war figure customs. Expect to see many more from me as ive decided to upload most of...2 comments |
![[Gears of War 3 Journeys End Marcus Fenix] Journeys End Marcus Fenix, an incredible figure to create, using only pieces of Gears of War Original previous series, with great detail in termianciones, appearance, and unique features of reality.](userimages/customs/36000/35823-1.jpg) Gears of War 3 Journeys End Marcus Fenix Gears Of Warby chief34Journeys End Marcus Fenix, an incredible figure to create, using only pieces of Gears of War Original previous series, with great detail in termiancio...1 comments | ![[Dizzy Wallin] One of my daughter's friends from back in high school commissioned me to create a Dizzy Wallin figure. It is going to be a Christmas present for someone. I used a torso and upper legs from a Gears3 Marcus Fenix figure and the lower legs from a Gears2 Fenix. The arms are from a Grayson Hunt Bulletstorm figure all made by NECA. I used a Mattel WWE superstars Terry Funk figure for the head and hat, I used apoxie to sculpt the beard and used thin styrene sheet to shape the brim of the hat. I sculpted the details on the chest with Apoxie, I used some bullets from some dollar store soldiers for the shotgun shells on the chest, I cut off the ends of the bullets and sculpted over the shells. Painted it all up with some dry brush and washes.](userimages/customs/35500/35320-1.jpg) Dizzy Wallin Gears Of Warby customtoyzOne of my daughter's friends from back in high school commissioned me to create a Dizzy Wallin figure. It is going to be a Christmas present for someo...14 comments |
![[Samantha Byrne (Gears of War 3)] I wanted to continue my Gears collection so after getting the Gears 3 figures I had to make my favorite character Samantha Byrne voiced by my favorite actress Claudia Black (yum!!!) She started as A NECA anya stroud and I started by removing the head and all the accessories. I then rebuilt he tactical belt to how it is in the game and repainted the entire figure. I used A WWE lita head cause it closely resembles the character, I reworked sculpted and painted the anya hair and added it to the head after making A bandana. I then added on the final paint details and there you have her. Hope you like and thanks for looking.](userimages/customs/35000/34919-1.jpg) Samantha Byrne (Gears of War 3) Gears Of Warby pyramidhead22I wanted to continue my Gears collection so after getting the Gears 3 figures I had to make my favorite character Samantha Byrne voiced by my favorite...5 comments | ![[Clay Carmine (Gears of War 3)] hello everyone, Today I present A customized figure of Clay carmine as seen in Gears 3. I just got these figures and felt clay was lacking as were all the figures, So first I changed the joint in his waste I hated the very loose swivel joint and made A cork joint so he swivels. I then changed out the lower legs to upper thighs I hate the joints the gave him and added on the legs of the carmine figure. I then added A joint to swivel his arms so he could hold his gun with 2 hands, they try to add 30 points of articulation into these figures guess they coulda added 32 so the could hold the gun not like early 90's action figures. I then repainted the helmet considering how they left out ALOT of details on it especially on the front of the mask and eyes. I then added mag pouches instead of the shotgun shells on his thigh. In all I like the improvements made... please tell me what you think and thank you for looking.](userimages/customs/35000/34811-1.jpg) Clay Carmine (Gears of War 3) Gears Of Warby pyramidhead22hello everyone, Today I present A customized figure of Clay carmine as seen in Gears 3. I just got these figures and felt clay was lacking as were a...1 comments |
![[Marcus Fenix New Custom] Marcus Fenix ​​figure, posibloe ambience created in the Gears Of War 3 when it is not yet showing any of the new characters that would lead to the end of a great trilogy.](userimages/customs/35000/34645-1.jpg) Marcus Fenix New Custom Gears Of Warby chief34Marcus Fenix ​​figure, posibloe ambience created in the Gears Of War 3 when it is not yet showing any of the new characters that w...1 comments | ![[Sgt.Shepherd] this is just pretty much an easy head swap...glued some some extra ammo pack on his chest and lower back...gave him a makeshift black bandana around his neck...the goggles are from a splinter cell figure...i customized a gun got kinda sick off all my gears figures with all the same weapons](userimages/customs/34500/34323-1.jpg) Sgt.Shepherd Gears Of Warby tcaprothis is just pretty much an easy head swap...glued some some extra ammo pack on his chest and lower back...gave him a makeshift black bandana around h...3 comments |
|