![[Zombie R2-D2! (Please Read Story!] ...I watched in horror as the once joyful, outspoken little astro droid began an awful transformation into something horrifying. Unknown sounds started to erupt from the droid's small frame. The sounds of gears stripping and electrical pops were overpowering to the ears.
All at once metal spider-like legs burst from all three sides of its body, raising it to nearly 7 foot tall. It's once beautiful frame was now covered with oil stains and exposed wires, as well as the gaping holes where the legs had emerged. It's head was tilted at an angle, exposing the whirling motor inside. The eye piece was hanging out of the socket and swinging as the droid rocked.
Slowly, it's legs began to move as it crept its way in our direction. Echo, the rookie of the clone squad was first to react. Assuming an attacking position, he charged toward the driod, firing his blaster as he went. All at once it make an awful shrill noise and a large metallic claw emerged from its dome. Snapping and swinging ba](userimages/customs/50000/49923-1.jpg) Zombie R2-D2! (Please Read Story! Star Warsby PlasticSurgen88...I watched in horror as the once joyful, outspoken little astro droid began an awful transformation into something horrifying. Unknown sounds starte...10 comments | ![[Nico Okarr] Another THE OLD REPUBLIC customs I made. I liked the Trailer when the Sith Empire returns to the galaxy and this smuggler in the trailer.. man, he#s cool. So i decided to create him. It way very easy. Just used the body and the coat of Cade Skywalker, took the head of the TLC Hoth Rebel Trooper and gave him the hat of a CW Cad Bane.
Tada, the smuggler was ready to fight](userimages/customs/50000/49744-1.jpg) Nico Okarr Star Warsby GavinAnother THE OLD REPUBLIC customs I made. I liked the Trailer when the Sith Empire returns to the galaxy and this smuggler in the trailer.. man, he#s ...2 comments |
![[Sith Warrior (the Old Republic)] Hi there. This is one of my first custom figures with paint. I got an TVC NAboo Royal Guard and gave the upper body and the legs a black paintjob. The head is a Resin Darth Revan head which I coloured black, silver and red. Robe, hood and Lightsaber is from the TVC Darth Maul.
This figure is one of the many Sith Warrior, fighting for Darth Malgus in the Battle for the Jedi Temple when the Sith Empire invades coruscant. The Sith warrior is fully posable and ready to fight ;)
Greetings from germany
Gavin](userimages/customs/50000/49743-1.jpg) Sith Warrior (the Old Republic) Star Warsby GavinHi there. This is one of my first custom figures with paint. I got an TVC NAboo Royal Guard and gave the upper body and the legs a black paintjob. The...5 comments | ![[JAINA SOLO Rogue Squadron Pilot / Jedi Master 1:12] This is a marvel legends style 6 to 6.25 inch JAINA SOLO STAR WARS action figure in her almost put on X-WING Fighter Pilot suit. The top portion of the suit was actually designed to come off as well leaving her t-shirt look as an option. The shirt portion of her uniform appears hanging down in her mid section. I saw a statue of her where she is holding her upper vest but I like seeing it on her instead so I compromised by leaving the shirt portion off so she is almost fully dressed for battle.
She is fully articulated using a chell base. Her pony tail is removable to allow her to put on the Helmet and visor. Her gun was made using the wire package parts from a gijoe vehicle accessory.
Named "Sword of the Jedi" by her Uncle Luke Skywalker, and daughter of Princess Leia and Han Solo, and twin sister to Jacen Solo, Jaina was an accomplished Jedi master of the New Jedi Order with her Mother's force sensitivity and her father's mechanical and piloting aptitude. She was a daring](userimages/customs/49500/49491-1.jpg) JAINA SOLO Rogue Squadron Pilot / Jedi Master 1:12 Star Warsby D&DCUSTOMSThis is a marvel legends style 6 to 6.25 inch JAINA SOLO STAR WARS action figure in her almost put on X-WING Fighter Pilot suit. The top portion of th...15 comments |
![[Grand Admiral Thrawn: Heir to the Empire EU] I was not satisfied with the stature of hasbro's version...the upper legs were way too short, so i replaced them with the legs from a captain Needa. I sculpted on the sides of the pants that "puff out." I also had to use the skirt part that came with Needa, since Thrawn's was now too small. I painted everything a uniform white (including the hands since they were originall sculpted as gloves).
In addition to that, I repainted the skin tone an icy blue, since I liked that color better and most of the source pictures depicted a similar hue.](userimages/customs/49500/49422-1.jpg) Grand Admiral Thrawn: Heir to the Empire EU Star Warsby etheCustomizer2220I was not satisfied with the stature of hasbro's version...the upper legs were way too short, so i replaced them with the legs from a captain Needa. I...10 comments | ![[Empire Strikes Back/Return of the Jedi Yoda] Who doesn't love YODA?!!
I want a complete collection of 1:12 star wars figures and this is just a step in that direction.
Even though it's Yoda, I really wanted a very articulated version, an I'm really happy with the result!
I cut down a movie Frodo, to get the right proportions. I sculpted the hands, and toes (that were attached to frodo's feet). I also sculpted a hump on yoda's back. The head is from a sculpture I did years back when I was trying out super sculpy. It was all one piece and I didn't want to cut the head off, so I cast it. I didn't have mold making kit so i made a 2 part mold with my apoxie sculpt, and cast in apoxie as well. I was happy with how well it turned out, and I got to keep my figure.
I repainted all of the clothes brown, after that I got to the lots of tones to get Yoda's skin where I wanted it.
The cloak was inspired by the work of glorbes and spawnsauce. If you don't know their work, it's great stuff, and what they do in cloth is inspiring! The c](userimages/customs/49500/49376-1.jpg) Empire Strikes Back/Return of the Jedi Yoda Star Warsby pulpyfictionWho doesn't love YODA?!!
I want a complete collection of 1:12 star wars figures and this is just a step in that direction.
Even though it's Yoda, I re...10 comments |
![[Mandalorian Merc-Gold;Vengeance 1:18 SCALE] Dusty
SW blaster
Mandalorian helm, jetpack
clone arm swipe
Custom forearm & Chest armor scuplt
Modelmaster hand painted.
Group Shot!](userimages/customs/49500/49246-1.jpg) Mandalorian Merc-Gold;Vengeance 1:18 SCALE Star Warsby engnjayDusty
SW blaster
Mandalorian helm, jetpack
clone arm swipe
Custom forearm & Chest armor scuplt
Modelmaster hand painted.
Group Shot!...2 comments | ![[Mandalorian Merc-Green;Duty 1:18 SCALE] Firefly
SW blaster
Mandalorian helm, jetpack
Custom forearm & Chest armor scuplt
Modelmaster hand painted.](userimages/customs/49500/49245-1.jpg) Mandalorian Merc-Green;Duty 1:18 SCALE Star Warsby engnjayFirefly
SW blaster
Mandalorian helm, jetpack
Custom forearm & Chest armor scuplt
Modelmaster hand painted....1 comments |
![[Mandalorian Merc-White/Blue;Reliability 1:18 SCALE] Scarlett
Avengers black widow lower legs
SW blaster
Custom armor & hair sculting
Modelmaster hand painted.](userimages/customs/49500/49244-1.jpg) Mandalorian Merc-White/Blue;Reliability 1:18 SCALE Star Warsby engnjayScarlett
Avengers black widow lower legs
SW blaster
Custom armor & hair sculting
Modelmaster hand painted....0 comments | ![[Mandalorian Merc-Red; Honoring a Father 1:18 SCALE] Snake eyes
Jango holster, helm, jetpack
ST arm swipe
Custom forearm & Chest armor scuplt
Modelmaster hand painted.](userimages/customs/49500/49243-1.jpg) Mandalorian Merc-Red; Honoring a Father 1:18 SCALE Star Warsby engnjaySnake eyes
Jango holster, helm, jetpack
ST arm swipe
Custom forearm & Chest armor scuplt
Modelmaster hand painted....3 comments |
![[Admiral Ackbar] Just a simple restoration/repaint. I had an old Ackbar that was in really rough shape when I got him so I decided he needed a fresh paint job. Tried to fix things a little, made his leg stripe more obvious, tried to make the skin tone/details more accurate and added his rank bars. Really simple, but one of my favorite projects ever.](userimages/customs/49500/49240-1.jpg) Admiral Ackbar Star Warsby Zebus_0Just a simple restoration/repaint. I had an old Ackbar that was in really rough shape when I got him so I decided he needed a fresh paint job. Tried t...2 comments | ![[Clone Commander Deadpool] I'm back with another in-between-other-customs custom: Deadpool as a Clone Commander! Straight up repaint, nothing too fancy here. Had fun making him. The last pic is with my "Iron Man Storm Trooper" that was commissioned. Hope ya like! Check out my facebook page:louddarrylcustoms](userimages/customs/49500/49153-1.jpg) Clone Commander Deadpool Star Warsby louddarrylI'm back with another in-between-other-customs custom: Deadpool as a Clone Commander! Straight up repaint, nothing too fancy here. Had fun making hi...2 comments |
![[Mermaid] Living deep in the darkest depths of the waters of Rodia, live a species never seen by the locals before; the Merfolk.
Last summer I was sitting in my room wondering what it would be like if the Star Wars universe had mermaids. That's how this happened.
I went to the local craft store with my mom to get some clays and paints. I took the figure that I thought would be best, Asajj Ventress, and sculpted her legs together as well as te fins on her arm and head. Waited about two days for the clay to completely dry, then began painting. I removed the belt that came with the figure and cut it shorter and gave it a different paint job.(I painted everything in regular acrylic paint.)
Once the paint had dried I created the fin out of Bake and Bend Sculpey and painted it once it was baked and attached to the tail. I then covered mostly everything in superglue to give it a shiny and wet look. This proved to not be a good idea because the right arm and wrist of the figure became stuck. Keep in min](userimages/customs/49500/49049-1.jpg) Mermaid Star Warsby Star Wars 1998Living deep in the darkest depths of the waters of Rodia, live a species never seen by the locals before; the Merfolk.
Last summer I was sitting in my...3 comments | ![[Mandalorian Hunter] This build was inspired by a Mando I saw by Luke Sprywalker. I liked all the different colors incorporated into the build and tried to mimic that some with mine. Enjoy!
Head/Ammo Belt/Arms-Jango Fett
Torso/Legs-Boba Fett
Backpack/Gun-Fodder](userimages/customs/49500/49037-1.jpg) Mandalorian Hunter Star Warsby PlasticSurgen88This build was inspired by a Mando I saw by Luke Sprywalker. I liked all the different colors incorporated into the build and tried to mimic that some...3 comments |
![[Zombie Stormtrooper] Here is my latest custom. A Zombie Stormtrooper! I made a similar one about 3 years ago when I first started customizing. The last pic is a side by side of that one and the latest one we have here. Take a look and see if u think ive gotten any better. Lol thanks.
Head-sculpted
Body-ANH Stormtrooper
Swamp Moss on arm and shoulder- Q-Tip cotton painted green](userimages/customs/49500/49036-1.jpg) Zombie Stormtrooper Star Warsby PlasticSurgen88Here is my latest custom. A Zombie Stormtrooper! I made a similar one about 3 years ago when I first started customizing. The last pic is a side by si...1 comments | ![[Darth Havok] Another Sith to add to Darth Krayt's ranks!](userimages/customs/49500/49024-1.jpg) Darth Havok |
![[Darth Wyyrlok III] Head was built using an existing Star Wars figure and Cables mouth and jaw with added sculpted details. The rest of the figure came from various other star wars figures from my fodder bins!](userimages/customs/49500/49023-1.jpg) Darth Wyyrlok III Star Warsby PackRatStudiosHead was built using an existing Star Wars figure and Cables mouth and jaw with added sculpted details. The rest of the figure came from various oth...2 comments | ![[Sith Apprentice] I dont recall what I used for this figure... a lot of various differnt parts cobbeled together!! Either way, he came out looking cool!](userimages/customs/49000/48990-1.jpg) Sith Apprentice Star Warsby PackRatStudiosI dont recall what I used for this figure... a lot of various differnt parts cobbeled together!! Either way, he came out looking cool!...5 comments |
![[Sith Training Droid] Having some fun here...
Sith Training droid was built from a Spawn Nitro riders figure plus fodder bits! Enjoy!](userimages/customs/49000/48989-1.jpg) Sith Training Droid | ![[Darth Wyyrlok II] Darth Wyyrlok II shows up in Legacy in a flashback I believe, not a lot of information about her character, besides the fact that she was considered Darth Krayt's "Voice"... Her father was Darth Wyyrlock I and her son is Darth Wyyrlock III.
Who doesn't love a female sith!
Figure was created using:
Base Figure: ROC Baroness
Head: ROC Cover Girl With Sculpt
Boots: ROC Cover Girl
Armor: Fodder
Cape: Darth Vader](userimages/customs/49000/48969-1.jpg) Darth Wyyrlok II Star Warsby PackRatStudiosDarth Wyyrlok II shows up in Legacy in a flashback I believe, not a lot of information about her character, besides the fact that she was considered D...0 comments |
![[Darth Bane V.2] This is my second Darth Bane done in this costume. The figure was built using:
Head & neck: Darth Bane
Torso: Jango Fett + sculpt
Left Arm: Winter Soldier
Right Arm: Weapon X
Legs: Prince of Persia
Boots: Darth Bane
Hooded Cloak: Darth Bane + hood from fodder box
Hood down Cloak: a Hobbit (I believe)](userimages/customs/49000/48968-1.jpg) Darth Bane V.2 Star Warsby PackRatStudiosThis is my second Darth Bane done in this costume. The figure was built using:
Head & neck: Darth Bane
Torso: Jango Fett + sculpt
Left Arm: Wint...2 comments | ![[Darth Krayt's Sith Troopers] Mandalorian head (from evolutions boxset), Iron Man Torso, hips, upper legs, Gi Joe ROC Power Suit arms and should armor, Lower legs from Winter Soldier. Hood comes from Evolutions Darth Maul.](userimages/customs/49000/48933-1.jpg) Darth Krayt's Sith Troopers Star Warsby PackRatStudiosMandalorian head (from evolutions boxset), Iron Man Torso, hips, upper legs, Gi Joe ROC Power Suit arms and should armor, Lower legs from Winter Soldi...5 comments |
![[Zabrak Warlord] Having some fun with some of my fodder!
Armor comes from a Berserker Skeleton Knight (as does the ceptor's skull), Upper Arms Darth Vader, Lower arms Savage Opress, Hands Skeleton Knight, Legs Destro, Head Darth Maul with Savage Opress Horns](userimages/customs/49000/48931-1.jpg) Zabrak Warlord Star Warsby PackRatStudiosHaving some fun with some of my fodder!
Armor comes from a Berserker Skeleton Knight (as does the ceptor's skull), Upper Arms Darth Vader, Lower ar...4 comments | ![[Savage Opress Real Life Real Serious] Savage Opress' Body Consisted of taking a Savage Opress Figure and Melding him with a GI Joe Destro. Arms, Torso Upper legs to knees are Savage. Waist, Hips, Boots and Feet come from Destro. Legs and Boots then re-sculpted and detailed to finish.
Head is a mix of Marvel Universe Cable, Savage Horns and Sculpt](userimages/customs/49000/48912-1.jpg) Savage Opress Real Life Real Serious Star Warsby PackRatStudiosSavage Opress' Body Consisted of taking a Savage Opress Figure and Melding him with a GI Joe Destro. Arms, Torso Upper legs to knees are Savage. Wai...2 comments |
![[Imperial Squadron: Vaders Fist] After the explosion of the 2nd Death Star, what was left of the Imperial Forces created a Mech Squadron called, "VADERS FIST", supposedly piloted by Darth Vader via remote (but commands through Holo Tech)... This was to strike fear into the rebel alliance! The imperial forces didn't know the Rebels knew Vader had indeed died... that fateful day.
Vader's Mech is built from a Wreck it Ralf figure, modded the mid section (base figure had too much of a pot belly!), Head comes from a Holographic Vader, with Built in LED for a REAL Holo look! 2 Custom Troopers and a Cover Fire R2 unit make up this squadron! Huzzah!](userimages/customs/49000/48911-1.jpg) Imperial Squadron: Vaders Fist Star Warsby PackRatStudiosAfter the explosion of the 2nd Death Star, what was left of the Imperial Forces created a Mech Squadron called, "VADERS FIST", supposedly pi...8 comments | ![[Han Solo in Carbonite Display 1:18th Scale] This Dio features two display options, Han Solo’s Carbonite on display or The Carbonite block thawing. The Thawing Block is mounted to the back wall, and the other can sit right on top of it!
The dio was built from a plywood base and a plywood backer wall. I built it up with Pink Foam, and coated it in Plaster. To give the plaster some protection, I covered it in white glue (thanks Tankster!). Once the White Glue hardened I spray painted it bright yellow, then went about adding shading using an airbrush, I did various washes and clear coats throughout as well. Lastly I hit it wish some drybrushing.
The Dio features 2 LEDS in the base that light up through the grates on the floor below Han, and there is 1 LED behind the mounted Clear Red “Thawing” Carbonite block. See a vid of that LED in action on my facebook.](userimages/customs/49000/48802-1.jpg) Han Solo in Carbonite Display 1:18th Scale Star Warsby PackRatStudiosThis Dio features two display options, Han Solo’s Carbonite on display or The Carbonite block thawing. The Thawing Block is mounted to the back...3 comments |
![[Kyle Katarn - the Vintage Collection] I wanted to update Kyle a little bit more, so he looks like he came right out of the Vintage Collection. I gave him more articulation in his legs (using a bespin Luke) and articulated ankles (random Boots)](userimages/customs/49000/48801-1.jpg) Kyle Katarn - the Vintage Collection Star Warsby PackRatStudiosI wanted to update Kyle a little bit more, so he looks like he came right out of the Vintage Collection. I gave him more articulation in his legs (us...3 comments | ![[Salacious Crumb] Used sculpting clay to add the beak, ears, mouth, and the tuffs of hair. Fits plenty well into the 6 inch scale. Yes that is Jabba, I'll post after the contest is over.](userimages/customs/49000/48631-1.jpg) Salacious Crumb Star Warsby YBulltoisUsed sculpting clay to add the beak, ears, mouth, and the tuffs of hair. Fits plenty well into the 6 inch scale. Yes that is Jabba, I'll post after th...1 comments |
![[Mandalorian Death Dealer] I've got a new one for you guys, finally. I've been doing nothing but horror figures the last few months, which I'll be posting soon, to get ready to stock my first convention booth at Crypticon Seattle and I needed a little break. This is an idea I've kicked around before and finally came up with the right recipe
A wandering Mandalorian warrior, Gath of Baal, comes across an ancient Sith relic called the horned helmet. It grants the wearer the unstoppable powers of the Death Dealer, but they come at a price. The helmet is always trying to control and consume the wearer pushing them to the brink of madness.
Recipe:
Pre Viszla Clone Wars figure
Horns from a deadite figure
Savage Opress's weapon
Older Star Wars Tauntan
All completely repainted and dyed the shroud.
I'm pretty sure this is my new favorite of my customs, I couldn't be happier with the way he turned out. Thanks for looking and comments are always appreciated.](userimages/customs/49000/48609-1.jpg) Mandalorian Death Dealer Star Warsby frankbooth23I've got a new one for you guys, finally. I've been doing nothing but horror figures the last few months, which I'll be posting soon, to get ready to...7 comments | ![[New Republic Jedi Temple on Yavin 4 (Episode 7 Con] After the events of Star Wars Episode 6, the New Republic is formed and Luke Skywalker builds a Jedi Academy on the old Alliance world of Yavin 4. This is my concept of what the temple would look like in the upcoming Episode 7.
Here we have Jedi Master Luke with 2 other Jedi Masters sitting at council... They are being met by the Chief of State Mon Mothma, as well as General Han Solo, Senator Leia Solo, and other members of the Senate. There are also other Jedi making a hologram "call", and student pilots going over a flight plan with General Lando Calrissian. And last, off in the corner, is a small memorial with the helmet of Luke's father, Anakin/Darth Vader.
Recipe; I made the temple with cardboard pieces that were painted with greys, browns, and greens- then used various Star Wars bases throughout (under the pillars, around Vader's helmet, etc.) The table was from an Episode 2 Genosis playset that I cut some pieces off and added a little effect to, and Vader's helmet is](userimages/customs/48500/48465-1.jpg) New Republic Jedi Temple on Yavin 4 (Episode 7 Con Star Warsby Blain3After the events of Star Wars Episode 6, the New Republic is formed and Luke Skywalker builds a Jedi Academy on the old Alliance world of Yavin 4. Thi...1 comments |
|