![[Ariel Designer] Disney came out with a Designer series last year featuring 10 Disney Princesses. Ariel became the most popular of the set and even now goes for $400 and up. What I did was buy the regular disney store doll repaint her face added lashes and re-created the dress from scratch as closely as possible to the original version. The hair was then restyled and the hair clip is made from clay. This took me a month to do and it was the hardest custom doll I ever made but I'm so happy with the result plus I saved a few hundred bucks. :)](userimages/customs/39500/39237-1.jpg) Ariel Designer Kingdom Heartsby RogueDisney came out with a Designer series last year featuring 10 Disney Princesses. Ariel became the most popular of the set and even now goes for $400 a...5 comments | ![[Ariel] I wanna be where the figures are
I wanna see, wanna see them dancin'
Walking around With those - what do you call 'em?
Oh - feet PEG HOLES!
Being a pin, you don't get too far
P.O.A. IS required for jumping, dancing
Strolling along down a - what's that word again?
a Diorama Street
I made this custom Ariel Figure out of a Disneyland Ariel pins head ,A cheetah body and a GI JOE arm with a supergirl cape for the bottom for the tail! I feel if I say too much Ill give myself away so hope you enjoy it thanks for looking!](userimages/customs/39000/38821-1.jpg) Ariel Kingdom Heartsby Yamivash 0I wanna be where the figures are
I wanna see, wanna see them dancin'
Walking around With those - what do you call 'em?
Oh - feet PEG HOLES!
Being a ...4 comments |
![[Sora] Here it is my submission for the monochromatic contest i actually made this on a whim when i purchased a thing of gold paint for another project you see i cut off the keyblade for another project and eventually regretted it so i decided to reattach the weapon(which was in 3 pieces)so i attached the pieces reattached to the figure then gave it a gold painting to give it that limited edition look and then i saw this contest pop and thought what are the chances? so enjoy.](userimages/customs/34500/34335-1.jpg) Sora Kingdom Heartsby bleachmagicHere it is my submission for the monochromatic contest i actually made this on a whim when i purchased a thing of gold paint for another project you s...3 comments | ![[???] painted the jacket blue the hair orange and put on some accessories](userimages/customs/32500/32482-1.jpg) ??? |
![[Demyx] Sorry I didn't get this to you guys sooner : P but v.1 desided a stage dive (with his sitar -____-) off the figure shelf. Everything that is not axel is sculpt even the sitatr](userimages/customs/27500/27252-1.jpg) Demyx Kingdom Heartsby NumberXIIISorry I didn't get this to you guys sooner : P but v.1 desided a stage dive (with his sitar -____-) off the figure shelf. Everything that is not axel...4 comments | ![[Ansem Seeker of Darkness] Ansem Seeker of Darkness the main villain from the first Kingdom Hearts I modded a
$20 wrestling figure I found on sale for $8 and bought it for the black leather coat well I had the figure left over and a kh Riku head left over so I removed Riku's hair(without damaging it)and I sculpted Ansem's hair from scratch and painted him the duel soul eater is from two soul eater swords left over from riku figures his base was included with the wrestling figure and the blue kh heart was sculpted from scratch I also embedded wires into his back and connected to the base since this is Ansem when he is connected to the World of Chaos(freaky ship at end of game)stay tuned for the Luxord custom I am currently working on.](userimages/customs/27500/27051-1.jpg) Ansem Seeker of Darkness Kingdom Heartsby bleachmagicAnsem Seeker of Darkness the main villain from the first Kingdom Hearts I modded a
$20 wrestling figure I found on sale for $8 and bought it for the ...2 comments |
![[Vanitas] This is Vanitas from the hit game Kingdom Hearts Birth By Sleep his legs come from a wrestling figure the upper body is from a spare Squall Leonheart I had left over after finishing my kh2 Riku custom(not yet submitted)the head is from a tron figure and silver part is sculpt while the skirt and belts are fabric.Originally I was going to use a tron figure as the base but the legs got changed and eventually all that remained was the head, sadly the wires got cut and the head lost the cool projection screen I am currently making a Vanitas without his helmet so stay tuned.](userimages/customs/27500/27049-1.jpg) Vanitas Kingdom Heartsby bleachmagicThis is Vanitas from the hit game Kingdom Hearts Birth By Sleep his legs come from a wrestling figure the upper body is from a spare Squall Leonheart ...2 comments | ![[Organization Xiii Larxene] Hello again! It's been a little while! This time I am listing Larxene, the twelfth member of Organization XIII in the Kingdom Hearts video game series. She was a little tricky - especially her finger daggers and her cloak! I also had to completely sculpt her face and hair, so there is absolutely no sign of Emma remaining in her! I'm very happy with the results!](userimages/customs/26000/25524-1.jpg) Organization Xiii Larxene Kingdom Heartsby ladydeathstickHello again! It's been a little while! This time I am listing Larxene, the twelfth member of Organization XIII in the Kingdom Hearts video game series...2 comments |
![[Anti Form Sora] Whats this 2 kingdom hearts uploads in two days what madness is this well actually I made both these mods a while back ago but I was just too lazy to upload them so here they are now so enjoy .](userimages/customs/25500/25364-1.jpg) Anti Form Sora Kingdom Heartsby bleachmagicWhats this 2 kingdom hearts uploads in two days what madness is this well actually I made both these mods a while back ago but I was just too lazy to ...2 comments | ![[Master Xehanort V.2] Well here is master xehanort (my second try compare with my old xehanort and tell me if there is a improvement(thanks)the main figure is made from the joker thug but the lower rove and head are from a neo figure I got a antique store so enjoy,I plan to make a vanitas,terra,aqua,ven, and a master xehanort V.3 if you guys think I should make these guys say so thnks.](userimages/customs/25500/25363-1.jpg) Master Xehanort V.2 Kingdom Heartsby bleachmagicWell here is master xehanort (my second try compare with my old xehanort and tell me if there is a improvement(thanks)the main figure is made from the...2 comments |
![[Zexion] Hi figure realmers ^-^ its been awhile. figure customizing is getting expensive and time consuming.(is just a kid) but I shall continue...till I get bored again xD anyways I've had the lexicon (the book) (and a sitar! a demyx maybe?) for some time now I just have gotten around to making the figure. : P I love comments so please comment xD
Zexion, the Cloaked Schemer, is the Nobody of Ienzo and is Rank VI in Organization XIII and an antagonist in Riku's storyline in Kingdom Hearts: Chain of Memories. He weaves illusions to fight for him. Unlike the other Organization members, Zexion's weapon was originally unknown, and his talents were used only outside of normal combat. In Kingdom Hearts Re:Chain of Memories, Zexion's weapon was revealed to be a book called a Lexicon.](userimages/customs/25500/25297-1.jpg) Zexion Kingdom Heartsby NumberXIIIHi figure realmers ^-^ its been awhile. figure customizing is getting expensive and time consuming.(is just a kid) but I shall continue...till I get b...5 comments | ![[Kingdom Hearts Ventus] Trying to expand my KH collection, this time with a custom Ventus. I sculpted his armor on him and completely sculpted his keyblade. I then painted him to match the design of Ventus. Overall he came out well. In one of the pictures you see little white dots but those are not on the figure, it was due to the lighting from the sun. Your comments are what keep me going so please let me know what you think. God Bless](userimages/customs/25000/24976-1.jpg) Kingdom Hearts Ventus Kingdom Heartsby metroid primeTrying to expand my KH collection, this time with a custom Ventus. I sculpted his armor on him and completely sculpted his keyblade. I then painted hi...1 comments |
![[The Dark Keyblade] This is a custom accessory for my Riku figure. I created his Dark Keyblade so he can duel with my Sora figure, in case you were wondering the circled Keyblade is the one that was customized. The only base I had was a piece of cardboard cut into the proper shape and then apoxied over. I am making more keyblades for your viewing but this is the only one that I have completely finished. Let me know what you think, your comments are always appreciated. God Bless](userimages/customs/25000/24842-1.jpg) The Dark Keyblade Kingdom Heartsby metroid primeThis is a custom accessory for my Riku figure. I created his Dark Keyblade so he can duel with my Sora figure, in case you were wondering the circled ...1 comments | ![[Kingdom Hearts Ventus] This was a very hard figure to make for my collection, I needed a figure that was shorter than the rest of my figures, in the end it was my mother that said to use wolverine. How perfect was that, how could I not have seen that he was the perfect for the job. Here he is finished and ready for your viewing, let me know what you think, and thanks again to yamivash 0 for his support. Your comments are always appreciated. God bless](userimages/customs/25000/24825-1.jpg) Kingdom Hearts Ventus Kingdom Heartsby metroid primeThis was a very hard figure to make for my collection, I needed a figure that was shorter than the rest of my figures, in the end it was my mother tha...1 comments |
![[Aqua] I know, again with the Kingdom Hearts figures, but I am such a diehard fan that I wanted a 3.75" scale to add to my collection. The head unfortunately has no articulation since it was sculpted right on the body, also I sculpted her keyblade which was the hardest part to me because of the amount of detail on such a small object. I made a whole collection of the 3.75" figures for my collection. Thanks for the look and a shout out to Yamivash 0 who gave me the encouragement to continue, thanks man. God Bless](userimages/customs/25000/24823-1.jpg) Aqua Kingdom Heartsby metroid primeI know, again with the Kingdom Hearts figures, but I am such a diehard fan that I wanted a 3.75" scale to add to my collection. The head unfortun...0 comments | ![[Namine] I am a collector of the Kingdom Hearts figures but after I got the figure I found out it was broken so I turned it into a Namine. I sculpted her clothes on and repaired her leg which was the broken part, but it has now lost all of its articulation. I also sculpted her pad and four crayons, so that way I just didn't paint and repair her to turn her into the character I wanted. I'm looking for your support, should I stop posting customs or do you feel I am good enough to continue, please tell me. Your comments are always appreciated and thanks for the look. God Bless](userimages/customs/25000/24741-1.jpg) Namine Kingdom Heartsby metroid primeI am a collector of the Kingdom Hearts figures but after I got the figure I found out it was broken so I turned it into a Namine. I sculpted her cloth...6 comments |
![[Master Xehanort] This was a figure that took a lot of consideration. I had to find a figure that was bald, could hunch over and was super-poseable. I sculpted all of his clothes on which was very hard to do while maintaining poseability. Over all I don't think he came out bad, I painted his eyes gold but you can't see it in the pictures unfortunately. I know his keyblade isn't finished but I wanted you to see his keyblade and see how hard it was to make. Your comments are alwys appreciated. God Bless.](userimages/customs/25000/24560-1.jpg) Master Xehanort Kingdom Heartsby metroid primeThis was a figure that took a lot of consideration. I had to find a figure that was bald, could hunch over and was super-poseable. I sculpted all of h...2 comments | ![[Terra] I wanted to make some 3.75" scale Kingdom Hearts people to use for my enjoyment. It was hard for me to find a figure taller than the average ones to turn into Terra. A chance visit to Target allowed me to see the Titanium man for the Iron man figure series and it was as if fate was on my side. I completely handsculpted the armor, I used tin foil to make his shoulde pads so his arms could still move, and I also used on the fins on his helmet. I painted him with metallic colors to give him the appearance of armor. I tried to make him as game accurate as possible, I am working on his keyblade and I will have pictures on here soon. Your comments are always appreciated. God Bless.](userimages/customs/25000/24559-1.jpg) Terra Kingdom Heartsby metroid primeI wanted to make some 3.75" scale Kingdom Hearts people to use for my enjoyment. It was hard for me to find a figure taller than the average ones...1 comments |
![[Kingdom Hearts Vanitas] Okay so this isn't my first attempt at a 3.75" figure but this is the first figure that I have completely sculpted. There is almost nothing left of the original figure, I had to make strands of clay about equal in length and size in order to complete this guy. The red detail work was not painted on it was sculpted, as was his keyblade. The only base for the keyblade was a piece of cardboard, I used my pocket knife to cut it out and you wouldn't believe how hard that is, the details in the keyblade like the holes in the top were very hard to cut out. I hope you like him, he is now the pride of my collection, so please tell me what you think of him, or if there are any ways to improve my work. Thanks for the look, and your comments are always appreciated. God Bless.](userimages/customs/24500/24384-1.jpg) Kingdom Hearts Vanitas Kingdom Heartsby metroid primeOkay so this isn't my first attempt at a 3.75" figure but this is the first figure that I have completely sculpted. There is almost nothing left ...1 comments | ![[Kingdom Hearts Pete] It's made from a Marvel legends Blob body and upper torso, DCUC Kalibak arms and pegs, Mr. Potato Head hands, and a Pete Pez Dispenser head. Plus lots and lots of additional sculpting.](userimages/customs/24000/23650-1.jpg) Kingdom Hearts Pete Kingdom Heartsby Rust This WorldIt's made from a Marvel legends Blob body and upper torso, DCUC Kalibak arms and pegs, Mr. Potato Head hands, and a Pete Pez Dispenser head. Plus lots...4 comments |
![[Master Xehanort] This is the second birth by sleep figure I have made. All you do is take off sephiroth's hair xD and shoulder pads, cuts some pegs and mold him a scalp.
Master Xehanort is a Keyblade master, the original master of Ventus, the creator and master of Vanitas, and the original incarnation of Xehanort. He serves as the main antagonist of Kingdom Hearts Birth by Sleep.](userimages/customs/22000/21826-1.jpg) Master Xehanort Kingdom Heartsby NumberXIIIThis is the second birth by sleep figure I have made. All you do is take off sephiroth's hair xD and shoulder pads, cuts some pegs and mold him a scal...3 comments | ![[Chernabog] This as well as my darkside was a idea from a friend for my last big figure that I bought with goliath his head is scuplted the wings are cardboard and the mountain is also cardboard covered in clay, then spray painted the figure black hand painted his eyes and mouth and the mountain is hand painted the flames are from a old ghost rider figure.](userimages/customs/21500/21381-1.jpg) Chernabog Kingdom Heartsby bleachmagicThis as well as my darkside was a idea from a friend for my last big figure that I bought with goliath his head is scuplted the wings are cardboard an...0 comments |
![[Darkside Heartless] Well a friend gave me the idea for this custom darkside from kingdom hearts I found a goliath figure on clearence at walmart and decided to bye it and 3-4 months later I decided to mod it. I scuplted the head by hand and wrapped some fabric around the head and spray painted the whole thing black and then glossed the whole thing enjoy.](userimages/customs/21500/21380-1.jpg) Darkside Heartless Kingdom Heartsby bleachmagicWell a friend gave me the idea for this custom darkside from kingdom hearts I found a goliath figure on clearence at walmart and decided to bye it and...2 comments | ![[Anti Form Sora] This was one hard custom xD not really but I bought the wrong paint and I had to scratch it all off cause it was tacky and wouldn't cure.
Anti Form is a Drive Form which appears in Kingdom Hearts II. It uses both party members, and represents the darkness that still dwells within Sora's heart. It consumes all of Sora's Drive Bars.](userimages/customs/21500/21198-1.jpg) Anti Form Sora Kingdom Heartsby NumberXIIIThis was one hard custom xD not really but I bought the wrong paint and I had to scratch it all off cause it was tacky and wouldn't cure.
Anti Form i...1 comments |
![[Ventus] This is a fairly easy custom and some poeple have done it already. I just needed to correct a few things. The armor on the shoes, chest, and arm are all scuply.
Ventus (also known as Ven) is a main protagonist in Kingdom Hearts Birth by Sleep. From the view of the story, it is revealed that he is one of the Keyblade Wielders before Sora and has a strong bond to him, even though they only ever meet through their hearts. Ventus, along with Terra and Aqua, fights against Master Xehanort and Vanitas. He is the youngest of the three Keyblade Warriors when it comes to age.](userimages/customs/21500/21180-1.jpg) Ventus Kingdom Heartsby NumberXIIIThis is a fairly easy custom and some poeple have done it already. I just needed to correct a few things. The armor on the shoes, chest, and arm are a...4 comments | ![[Roxas] This is my first ever custom. yeah I know its a very easy custom xD all I did was buy two play arts figures sand the neck and pop the head on.
Roxas is the Nobody of Sora and a former member of Organization XIII, born when Sora took his own heart to restore Kairi's. Although Sora's heart was soon restored, Roxas continued to endure and exist, oblivious of Sora's existence for most of his life. Prior to the events of Kingdom Hearts II Roxas was Rank XIII within the Organization, and bore the title Key of Destiny.](userimages/customs/21500/21168-1.jpg) Roxas Kingdom Heartsby NumberXIIIThis is my first ever custom. yeah I know its a very easy custom xD all I did was buy two play arts figures sand the neck and pop the head on.
Roxa...6 comments |
![[Ven Custom] I took my old Roxas play arts figure and gave him some premo clay armor and a clay keyblade and voila! ven is born! tis probably took me about 30 minutes (waiting for the clay to bake T.T) and was fairly easy for someone who is not cool at customs so I encourage you all to customize!!!](userimages/customs/21000/20631-1.jpg) Ven Custom Kingdom Heartsby omnislash231I took my old Roxas play arts figure and gave him some premo clay armor and a clay keyblade and voila! ven is born! tis probably took me about 30 minu...0 comments | ![[Ventus Improved] I repainted some of his clothes and made his skin a bit lighter. Still working on a keyblade.](userimages/customs/19500/19483-1.jpg) Ventus Improved |
![[Roxas] Well I made this guy recently its a 12 inch roxas in org 13 coat the robe was hand sewn and the rest was sculpt](userimages/customs/19500/19468-1.jpg) Roxas | ![[Ven] I added some touchups and took better pictures. I'm working on a vanitus and some keyblades](userimages/customs/19500/19422-1.jpg) Ven |
|