![[Ashley Williams] This is a revisit to one of my earliest customs after seeing the Evil Dead remake!
Head - SW Draco
Torso - MU Strange
Belt - MU Draxx
Chainsaw - GI Joe Buzzer
Upper Legs - MU Starlord
Lower Legs - MU Draxx
Harness - GI Joe Trakker](userimages/customs/49500/49001-1.jpg) Ashley Williams Army of Darknessby Iron WillThis is a revisit to one of my earliest customs after seeing the Evil Dead remake!
Head - SW Draco
Torso - MU Strange
Belt - MU Draxx
Chainsaw - GI Jo...3 comments | ![[Evil Dead: Gravesite Ash Custom] I'm a HUGE fan of action figure bases/diaromas, so I felt the need to make one for EVIL DEAD's ASH! The past Ash's have come with bases, so I naturally wanted one with this guy. So the figure itself isn't really modified. I only swapped out the hand from the "Deadite Ash" figure on this one. The base was completely made from scratch. It's made of of Self-Hardening Artist Clay, which was then painted in acrylic paints. The "wetness" in the footprints was made with clear glossy nail polish lol. I repainted the blood for the Lina head, making it much more bloody and "wet" and gross looking. The cross was made from baking sticks and so was the shovel. Anyway, hope you like it!](userimages/customs/40000/39975-1.jpg) Evil Dead: Gravesite Ash Custom Army of Darknessby EgrkaI'm a HUGE fan of action figure bases/diaromas, so I felt the need to make one for EVIL DEAD's ASH! The past Ash's have come with bases, so I naturall...2 comments |
![[Ash Williams] Finally after some time of not being able to work on customs here is one of my newest customs. Ash Williams from the Evil Dead series. Used the torso of GI Joe renegades Duke, with ROC Storm Shadows legs. sculpted some details to shirt. Has a removable chainsaw and Mechanicle hand. Thanks for looking and as always comments are welcome.](userimages/customs/39000/38527-1.jpg) Ash Williams Army of Darknessby issaim98Finally after some time of not being able to work on customs here is one of my newest customs. Ash Williams from the Evil Dead series. Used the torso ...4 comments | ![[Ash Vs2] first thing i did to make this custom was get the figure!DUH!.then i scraped off all the paint and used clay to make a new shirt.then i made the strap by cutting and gluing cardboard.after that i sculpted a new face to at least try to match the movie.then i sculpted new hair for him. afterwards i repainted him.](userimages/customs/34500/34350-1.jpg) Ash Vs2 Army of Darknessby toydude251first thing i did to make this custom was get the figure!DUH!.then i scraped off all the paint and used clay to make a new shirt.then i made the strap...1 comments |
![[Ash Williams] I actually wanted to go for a more original look for this one. He's a Angel figure with a Captain Marvel head.](userimages/customs/31000/30628-1.jpg) Ash Williams | ![[Army of Darkness Ash Williams] "Hail to the king,now give me some sugar baby".My name is ash I am slave.I had a real life once.A job.A wonderful girlfriend Linda.Together we drove to a small cabin in the mountains. It seems an archaeologist had come to this remote place to translate and study his latest find.Necronomiconex mortis roughly translated, "Book of the Dead". Bound in human flesh and inked in blood, this ancient sumerian text contained bizarre burial rites, funerary incantations and demon ressurrection It never was meant for the world of the living. The book awoke something in the dark in the woods.It took linda then came for me.It got into my hand and it went bad.So I lopped it off at the wrist.But that didn't stop it.It came back big time in trying to destroy the book, some kind of time tunnel was opened.I dropped out of the sky.Landed in year 1300AD There it was more of the same deadites , the undead spawn of the necronomicon. I went on a quest for the book not bescause I wanted to h](userimages/customs/29500/29356-1.jpg) Army of Darkness Ash Williams Army of Darknessby SOLORUNNER"Hail to the king,now give me some sugar baby".My name is ash I am slave.I had a real life once.A job.A wonderful girlfriend Linda.Together ...6 comments |
![[Ash] Evil Dead series great classic horror movies enjoyed them so i end up makin ash after i was inspired by the base figure of the spirit by other customizers but its just a mix of the Mcfarlane ash and the spirit nothing special and a paint job done hope you like it enjoy. God bless](userimages/customs/29500/29003-1.jpg) Ash | ![[Ash V.2] So since I started customizing ash has been my most customized figure but on the realm this is only my second ash I lost my older ash customs when I moved sorry guys I would have loved to post them. This is ash is just a dcuc starman with resculpted shirt and a new paintjob with s-mart ash head and left hand the metal hand is a cyborg superman hand.](userimages/customs/28000/27514-1.jpg) Ash V.2 Army of Darknessby kumajinno0So since I started customizing ash has been my most customized figure but on the realm this is only my second ash I lost my older ash customs when I m...3 comments |
![[Ash Williams] I saw a recipe here on figurealm of an Ash custom using movie Spirit as the base which was pretty darn groovy, however he was a little too tidy for my liking so I tried my own twist on it.
NECA Ash head and left hand
McFarlane Chainsaw
Kirk arms
resculpted shirt
repaint](userimages/customs/27000/26866-1.jpg) Ash Williams Army of Darknessby Spiderdood90I saw a recipe here on figurealm of an Ash custom using movie Spirit as the base which was pretty darn groovy, however he was a little too tidy for my...9 comments | ![[Ash] The name is Ash housewares simple repaint of a spirit body using smart ash's head hand and boomstick with mfarlane ash's chainsaw straps are just random fodder](userimages/customs/26500/26324-1.jpg) Ash Army of Darknessby kumajinno0The name is Ash housewares simple repaint of a spirit body using smart ash's head hand and boomstick with mfarlane ash's chainsaw straps are just rand...6 comments |
![[Pit Battle Ash ( Evil Dead 2)] This Took me a very very long time because the movie maniac pit battle ash has a swivel neck and the cult classics medival ash has a ball joint, so to keep the articulation in the nec I had to remove the ball from ashs head and cut the neck of the mcfarlane ash in the perfect shape for ashs head , than I jus glued the to pieces together and popped the head onto the movie maniacs body. I gave him the neca mechanical hand and the movie maniacs chainsaw, and the Terminator 2 T-1000 left hand to hold the boomstick.
Now I have a perfect Pit battle Ash.](userimages/customs/23500/23119-1.jpg) Pit Battle Ash ( Evil Dead 2) Army of Darknessby NEOTHEONEThis Took me a very very long time because the movie maniac pit battle ash has a swivel neck and the cult classics medival ash has a ball joint, so to...1 comments | ![[Ashley J. Williams] I really like the Army of Darkness figures that Pallisades put out several years ago, but they are kind of fragile and have loose joints. So, I took a head fom the 2-headed Ash, a build a droid arm (not sure which one), and an Indiana Jones figure( I think it's the one that came with the Lost Ark). A little dremeling, some boiling water, and a little paint later, I have a fairly sturdy Ash that can now rid my toys of their Deadite posession. Thanks for looking.](userimages/customs/19500/19379-1.jpg) Ashley J. Williams |
![[Ash Williams] "Hail to the king baby!"
Recipe:
Deluxe Angel upper body, Spike lower body
Resculpted DCSH Supes head
McFarlane Ash Chainsaw
NECA Boomstick
Hand made holster
Wanted a super articulated Ash, so I made one with some Buffy fodder I bought a while back; the arms are inter changeable so I made an extra sleeved left arm (not pictured) so he can be undamaged (more evil dead 1)....that and I was too lazy to sculpt the shirt torn.
Resculpted the Supes hair, carved in his chin and cheek scars.
Kinda phoned in but made it out of the same material my Bat capes are made of. Some stitching here and there, a little paint and he's got a removeable, working holster.](userimages/customs/19500/19185-1.jpg) Ash Williams | ![[Ash] Took neca ash gave him repaint and added mcfarlane chainsaw.](userimages/customs/17500/17335-1.jpg) Ash |
![[Ash] This is my ash fgure from army of darkness/ evil dead. The base is face off punisher I used doc ock legs but punishers feet. The right arm is from doc ock also and the chainsaw was sculpted out of sculpy.I used supermans head. And the shirt was sculpted also. Tell me what you think.](userimages/customs/17000/16976-1.jpg) Ash Army of Darknessby hobbygoblinThis is my ash fgure from army of darkness/ evil dead. The base is face off punisher I used doc ock legs but punishers feet. The right arm is from doc...2 comments | ![[Ash Williams] I took a few liberties with the design. The body is from a Thor and the head is from a Superman. I made the chainsaw from scratch. The Necronomicon was made from Fixit. I splattered the body is red, black, and green paint to express the gore from Evil Dead 2.](userimages/customs/17000/16975-1.jpg) Ash Williams Army of Darknessby BalisconI took a few liberties with the design. The body is from a Thor and the head is from a Superman. I made the chainsaw from scratch. The Necronomicon wa...12 comments |
![[Ash Williams] This is the hardest custom I've ever made
first
1. Took supermans body and removed the legs(pretty much destroyed the groin area)
2. removed TDK scarecrows legs
3. Put scarecrows legs in superman groin. Had to find every little piece and carefully put it together without glueing pegs together.
4.took scarecrows hand and put it in supermans peg .
5. Used the T-600 terminator right hand for the gauntlet (it looks almost identical to the real thing.
6. Used my dremil to lower the neck so the head could fit on.(my first dremil)
7. Glued the head on and then painted(all day long) untill I had a resonable ash.
8. made boomstick holster out of hellboys coat and then used the mcfarlane chainsaw and boomstick.](userimages/customs/16500/16448-1.jpg) Ash Williams Army of Darknessby NEOTHEONEThis is the hardest custom I've ever made
first
1. Took supermans body and removed the legs(pretty much destroyed the groin area)
2. removed TDK scare...2 comments | ![[Ash J. Williams] Name: Ash J. Williams
Base Figure: Sarlacc Pit Han Solo
Height: 3.75
Description: This took me a long time to do.
1. I took the han solo's body(because the shirt looked very close to ashes) and painted it blue.
2. Took terminatrix hand and made a peg that would fit both the hand and hans arm.
3. Took battle droid backpack ,cut the wire off and painted red. Then took the bottom of the sigma six snakeye's knife (with the hole in the bottom) and made a peg that would fit both the arm and in the knife hole. Then took the sigma 6 snakeyes sword and cut off where the sword starts and took out the length of the chainsaw blade. then glued it all together to make a chainsaw(and I painted it all.)
4. took anakin skywalkers head and painted it and trimd the hair to look like ash
5. Made Boomstick holster out of Indy Jones satchel and cut out the shape of the holder from hellboys jacket and found a way to make it into a holster
6. boomstick is made of a machingun cut up and edited
All right, yo](userimages/customs/16500/16318-1.jpg) Ash J. Williams Army of Darknessby NEOTHEONEName: Ash J. Williams
Base Figure: Sarlacc Pit Han Solo
Height: 3.75
Description: This took me a long time to do.
1. I took the han solo's body(becaus...0 comments |
![[Ash Williams] This was certainly a passion project for me. I (and countless numbers of one-liner fans) fell in love with Ash's character in Evil Dead 2. The attitude and weaponry were wicked awesome. So I decided to make an Ash for my display. I used the head, neck, left hand and boots from the NECA Medieval Ash. I literally cut the entire neck and collar bone out of the NECA Ash and implanted it into the Apollo's (Battlestar) upper torso. Talk about a dremel-fest. I sanded down a lot of areas including the shoulders and chest area. Then, I used Apoxy Sculpt to recreate the medieval shirt Ash dons in Army of Darkness. I sculpted the belt as well. The right mechanical hand was taken from a ML Mr. Sinister and then painted black and dry-brushed silver. The strap for the boom-stick holster came from Sinister's cape strands. Everything was painted with Model Master Acryl paints....Ahhh yes the glorious chainsaw hand. This was relatively easy to do. I used a Movie Maniacs Texas Chainsaw Massac](userimages/customs/15500/15479-1.jpg) Ash Williams Army of Darknessby billmaruThis was certainly a passion project for me. I (and countless numbers of one-liner fans) fell in love with Ash's character in Evil Dead 2. The attit...13 comments | ![[Ash (comic version)] I had NECA's Ash in package since it came out, and since I've been trading off a lot of my non-articulated figures lately, but I really liked this Ash, I thought why not make it a custom? I love the versions of Ash that appear in the AoD comics, with Ash being really muscular and more hardened from fighting through time - so I went for a mix of the comic stylings.
I decided to see how far I could push myself with this thing. Instead of finding a base figure with abdominal articulation, I decided to cut apart the NECA AoD Ash and add my own. Merged Ash with a SMC Sandman figure using a lot of dremelling, drilling, and a metal pin. From the abs down is all Sandman with a bit of Milliput to fill the shirt area in. Sandman's pants were pitted pretty badly (okay for Sandman I guess...) so I did a wash with watered down Milliput a couple times to fill them in a lot. I left a little of them showing to serve as grit and grime from Ash's adventures
His arms needed to be pretty muscular, and N](userimages/customs/14000/13707-1.jpg) Ash (comic version) |
![[Hail to the King, Baby!] This sweet baby was customized with a Superman Returns action figure for the base, clipped off the cape with scissors.The head, hand, and chainsaw was made from The Sideshow Toys Army of Darkness Ash figure. The base was painted with flesh colored paint, the pants were pained with a darker blue, and the boots were painted with black paint. I also painted his hair to make it more jet black because before it was greyish. The head and hands from the Superman Returns figure and the Ash figure, I just yanked them off with my bare hands. How I added the head and hands was that I put clay to stick it on and painted them flesh colored. So I hope you enjoy this action figure and hail to the king, baby!](userimages/customs/11000/10759-1.jpg) Hail to the King, Baby! | ![[GROOVY Chainsaw.] I wouldn't have been able to make this groovy looking chainsaw without the help of my father. How we both worked ont it together was that we used an old paint jar as the body, a sink part for the motor, and a piece of wood that we both traced on with a real chainsaw blade to make it chainsaw shaped. With a little help from some bolts and screws you'll be able to kick some deadite ass with this excalibur.](userimages/customs/10500/10478-1.jpg) GROOVY Chainsaw. |
![[Ash Williams Animated with base] I started this custom at 8:00 p.m. and now it's 2:00 a.m. I sculpted Ash's chainsaw, hair, pants, "fruit cellar" zombie's head, and "colleague" zombies head. The floor and wall was made of foam, the "colleague" zombies body parts are a JLU Superman, and Ash was made from a JLU Flash repainted, the hatchet was made from a toothpick and paper, the straps are rubber bands, the shotgun and and holster is paper, and the Necronomicon pages are made of paper. This was really fun to make and I hope you guys like it!
Update!
New Pic!](userimages/customs/10000/9657-1.jpg) Ash Williams Animated with base | ![[Ash] There have been a few Ash's figures over the years all with great detail, but with very limited articulation, so I got a little busy, it may not have amazin detail, but I am glad how it turned out.
Head and left hand - Neca's S-mart Ash
Torso - Deluxe BTVS Spike
Legs - Art Assylum Captn. Picard
Boots, chainsaw, shotgun and
right hand - McFarlane Ash](userimages/customs/8000/7650-1.jpg) Ash Army of Darknessby rmelara7There have been a few Ash's figures over the years all with great detail, but with very limited articulation, so I got a little busy, it may not have ...2 comments |
![[Female Knight] Now, it’s no “chick in chain mail”, but I still like the way it looks, even though it’s a “simple” head change. I say “simple” because these 1/18 figures have more different styles of neck posts than Dragon has produced 1/6 WWII German figures! Heck, Star Wars figures almost do that by themselves. So after fabricating a suitable neck post, out of the barrel from a knock-off .50 cal machine gun, here she is- a Star Wars Mara Jade head on a AoD knights body.](userimages/customs/7000/6631-1.jpg) Female Knight | ![[Ash (Cartoon Style)] Ash from Army of Darkness ..made the chainsaw and post your comments and criticisms.](userimages/customs/6500/6424-1.jpg) Ash (Cartoon Style) |
![[Ashley J. Williams Post Evil Dead 2 fight.] I really want to come up with a good story line. But if you don't know who this is, GET OUT!!!
I'm a big fan of the evil dead series, and even though this series says "Army of Darkness" It's based on the way he looked at the end of ED2, after fighting rotten apple head.
This was my longest, and perhaps best custom, so far! I took him totally apart. I went and bought some "Fixit Sculpt", and went to town on this guy.
First, the head had a very round top, and a pointy chin. So, I gave him his big hair, and a more distinguished chin with the cleft in it.
next the pants originally stopped at the top of the shoes. So I used the Sculpt to make his pant legs longer, and tattered. And the feet still rotate, as well.
The right hand was removed, and the chainsaw was added, but first...
The chainsaw was originally very thin, with little detail. So, I used the Sculpt to ad the extra side handle,bigger motor, and a pull start chord handle.
I then drilled a small hole in th](userimages/customs/6000/5573-1.jpg) Ashley J. Williams Post Evil Dead 2 fight. Army of Darknessby JunkPunkI really want to come up with a good story line. But if you don't know who this is, GET OUT!!!
I'm a big fan of the evil dead series, and even though...3 comments | ![[Ash] Body Base- DCS Superman, Chest Repainted - Black T-Shirt, Face & Arms Repainted - Flesh Tone, Battle Scars - Red
McFarlane Movie ASH - Chainsaw,Necronomicon,Metal Hand, Boom Stick.
McFarlane Matrix Trinity - 9mm W/ Holster Repainted
McFarlane Commando Spawn - Belt Accessories & Shotgun Shells Repainted.
LOTR Aragon Leather & Chainmail Skirt Turned Into ShotGun Holster.
LOTR Legolas Left Hand Repainted.
CBLH Super Patriot Arm - (Alt) Hand Cannon/ Flame Thrower Repainted.
Mickey D's Straw - Wrist Watch
Mr. Sinister Cape & Metal Ring - Chest,Book & Arm Straps
John Cena Havoc Unleashed - Black Cross Trainers.
Epoxy Sculpt - Pants (Painted Brown & Black Dry Brush )
I Wanted To Make A Kick bum Ash With More Gear From His Many Travels Back & Foward Through Time
Now He Is A One Man Army Aginst The Evil Dead .
Keep Up The Killer Work Everyone](userimages/customs/5000/4888-1.jpg) Ash Army of Darknessby GoldenwolfBody Base- DCS Superman, Chest Repainted - Black T-Shirt, Face & Arms Repainted - Flesh Tone, Battle Scars - Red
McFarlane Movie ASH - Chainsaw,Ne...3 comments |
![[Ash Williams (update)] Hi again, well everybody said that my Ash needs his chainsaw, and I thought that you were right, so I made one for him.
I made the chainsaw from the blade of one Spawn cyborg figure, don't remember exactly the name, and part of the gun of HoM Ironman.
What I did for make it swappable was to take the peg that holds the hand off and the peg of the arm that remain goes ito a little hole I carved into the chainsaw. Hope you like it. see you.](userimages/customs/4000/3563-1.jpg) Ash Williams (update) Army of Darknessby thejoemxHi again, well everybody said that my Ash needs his chainsaw, and I thought that you were right, so I made one for him.
I made the chainsaw from the b...2 comments | ![[Ash Williams] Hi again, i have to say about this character that i didn't knew him before the marvel zombies/army of darkness crossover, then i found out that there are 3 films of him (evil dead trilogy) and i bought them to watch them and now i'm a fan, however this is inspired by the marvel/dynamite crossover and it was a fun to do.
recipe:
head is from ml galactus series nightcrawler (dremeled hair then reesculpted, hears and chin)
torso is from ml silver surfer sculpted over
waist to shoes ml monsters box set dracula
right arm face off red skull sculpted over
left arm bullseye sculpted over
gun holster from daredevil chakos holder
the rest is from mr sinister cape.
i couldn't find a boomstick for him so i repaint an old rifle to simulate and will work on a chainsaw but i need time.
thanks for watch.](userimages/customs/3500/3360-1.jpg) Ash Williams Army of Darknessby thejoemxHi again, i have to say about this character that i didn't knew him before the marvel zombies/army of darkness crossover, then i found out that there ...15 comments |
|