![[Starscream] Hi, I fully repainted the Starscream voyager class with airbrush and hand. I handmade a diorama base to reproduce the first movie main scene with this character.](userimages/customs/48500/48478-1.jpg) Starscream Transformers - Movieby gazoro86Hi, I fully repainted the Starscream voyager class with airbrush and hand. I handmade a diorama base to reproduce the first movie main scene with this...2 comments | ![[The HORNET...Formally Ironhide] another addition to the 'END OF THE ROAD' series
"When all is said and done, when the years pass by with no change in seasons... and the only sounds echoing in the once thriving cities are that of machines, you know you've reached the End of the Road. With humanity near extinction the fight between Autobot and Decepticon still rages on across the irradiated wastelands of a dying Earth."
little snipets of the story i am working on.....
Once known as the weapons specialist ‘Ironhide’, Ironhide was one of the first Cybertronian beings to make contact with planet Earth.
Once thought to have been destroyed by the traitor sentinel prime, ratchet secretly worked on repairing him and salvaging his primary core, after many years and dedication ratchets hope for his old comrade came insight as Ironhide’s allspark flickered to back to life.
Once fully operational, what was left of the Autobot team filled him in on everything past and present including the brutal](userimages/customs/48500/48028-1.jpg) The HORNET...Formally Ironhide Transformers - Movieby meekoanother addition to the 'END OF THE ROAD' series
"When all is said and done, when the years pass by with no change in seasons... and the only so...11 comments |
![[BUMBLEBEE Movie] the changes of this bumblebee master replication go beyond simple repaint, the neck was lengthened by inserting a piece of baljoint from a surplus of a gundam kit, now the neck is longer and can also rotate the head up and down, the right arm (base only has his right cannon arm) is obtained by purchasing a second bumblebbe cheap, and turning his left arm in a right arm, I cutted and turned the thumb and details and then repainted, the colors used are markers indelible used with drybrush tecnique](userimages/customs/47500/47143-1.jpg) BUMBLEBEE Movie | ![[Optimus Protoform Anime Color] this repaint of optimus movie Protoform is obtained using the technique of drybrush with permanent markers, and transparencies acrylics
the basic version, all gray, it was a little monotonous, and I preferred a nice anime repaint](userimages/customs/47500/47111-1.jpg) Optimus Protoform Anime Color |
![[Bumblebee] Hi Realmers :)
This is a Transformers: Dark of the Moon Mechtech Bumblebee repainted with vallejo game color.
Added some battle damage, rust and mud on his feet.
The head was moved from its original position because bumble was badly proportioned.
I used the included weapon to make his plasma arm canon. Fitted a blue LED in it with a connected LED Flasher circuit to make it look like he is shooting. Really looks like a pulse weapon. B) Going to make a tutorial for this circuit in the near future.
I hope you like it!](userimages/customs/47500/47086-1.jpg) Bumblebee Transformers - Movieby TicaLHi Realmers :)
This is a Transformers: Dark of the Moon Mechtech Bumblebee repainted with vallejo game color.
Added some battle damage, rust and mud ...2 comments | ![[Hot Shot] Transformers Cyberfire Bumble Bee body and Transformers Fall of Cybertron Onslaught head. After buying the Cyberfire Bumble Bee at my local Family Dollar store..all it was screaming was Hot Shot. After buying Onslaught, I repainted the head silver and the disc on his head aluminum and the eyeslots blue. Therefore.....Hot Shot is born.](userimages/customs/46000/45602-1.jpg) Hot Shot |
![[DIRT BOSS- CAT Forklift Truck] hey everyone,
nothing major here just a bit of fun and practice :)
my kids got me one of these for my B'Day as i use one at work 99% of the time..... but this figure was originally bright green :(
so i gave him a complete new paint job to match ours.... then added an old rusty effect....sadley to match ours too.
thanks for looking](userimages/customs/45000/44889-1.jpg) DIRT BOSS- CAT Forklift Truck Transformers - Movieby meekohey everyone,
nothing major here just a bit of fun and practice :)
my kids got me one of these for my B'Day as i use one at work 99% of the time........4 comments | ![[Ultimate Optimus Prime] Hey guys, big Optimus Prime Custom here.. took a ROTF Leader Optimus Prime and took the DOTM Ultimate trailer armor, and combined the two together!
THis custom was hard, but it was fun,. learned a lot,.. take a look! thanks!
Key points -
- Removable Helmet
- Articulated figures/hands
- Custom Ion Blaster
- Fully Articulated
- Non transformable
More pics after the jump! Thanks for LOOOKINGGGGGGGG](userimages/customs/44500/44221-1.jpg) Ultimate Optimus Prime Transformers - Movieby wyLunHey guys, big Optimus Prime Custom here.. took a ROTF Leader Optimus Prime and took the DOTM Ultimate trailer armor, and combined the two together!
...8 comments |
![[ROADKILL Transformers Eotr Series] Another character for Jin Soatome's ''End Of The Road series'' set in a post apocalyptic baron wasteland earth.
background story.....
ROADKILL was once known as Roadbuster many years ago when he was part of the trio known as...the wreckers,a set of three cybertronian beings (Roadbuster,Leadfoot and Topspin)feared by all decepticons except one....the mighty combiner DEVASTATOR,
to prove a point Devastator set up a trap with the help of Starscream and Soundwave to ambush them, and ambush them they did, they manage to take out 2 of the 3 wreckers.
Rescued by Optimus Prime himself,
after losing his best friend and closest allies Roadbuster became consumed by guilt, which lead to revenge which then turned to an unstoppable rage.
He decided to leave the autobot team and go it alone after devastator and rip him apart one decepticon at a time, and once the muscle was out of the way Starscream and Soundwave would have nothing to hide behind.
he was given the name 'ROADKILL' by the deciptio](userimages/customs/43500/43207-1.jpg) ROADKILL Transformers Eotr Series Transformers - Movieby meekoAnother character for Jin Soatome's ''End Of The Road series'' set in a post apocalyptic baron wasteland earth.
background story.....
ROADKILL was ...6 comments | ![[BLURR - Transformers: End of the Road Series] hello everyone,
Jin Soatome done a range of transformers for his own series End Of The Road, which is set in a post apocalyptic earth.They were so great i wanted to do one for myself
This is BLURRR
mine is a bit tamer than Jins but i wanted him to be more minimal and with less heavy guns as he's the fastest recon scout on the planet he needs to be more light weight, that or i was thinking he's from a prequel story to Jin's 'the crossroads' where they're only just starting to go all mad max style
he started of as sideswipe
then i messed around removing things and adding magnets here there and everywhere, so all the back armor can be removed and replaced,
same as the arm blades they can be removed too
then added spikes,cocktail sticks,
chains, from a cheap MYO keyring set
barbed wire, wire just twisted to look similar
then the paint job,
1.grey with dry-brush,
2.the the blue and white colors
3.silver dry-brush on the car colors
4.tanned wash
5.black wash
6.rust effect
as you can](userimages/customs/43500/43127-1.jpg) BLURR - Transformers: End of the Road Series Transformers - Movieby meekohello everyone,
Jin Soatome done a range of transformers for his own series End Of The Road, which is set in a post apocalyptic earth.They were so gre...4 comments |
![[Laserbeak] Repaint of Laserbeak. This figure has a lot of details which begged for being painted. I decided to leave the red parts and add some more red paint to keep Laserbeak a bit more G1 style. Hope you like](userimages/customs/42000/41878-1.jpg) Laserbeak Transformers - Movieby GladkyRepaint of Laserbeak. This figure has a lot of details which begged for being painted. I decided to leave the red parts and add some more red paint to...2 comments | ![[Movie Bumblebee Old CAMARO] Hi I`m BACK und the next time ill bring just some REPAINTS till i start wih customs again
this is the old camaro bumblebee wih a repaint that looks much more real than he toy
hope you like it](userimages/customs/41500/41313-1.jpg) Movie Bumblebee Old CAMARO |
![[Megatron and Igor with Shotgun] Leader of the decepticons, I bring you, all mighty megatron! Painted with a nice olive green, with rust and dirt made from red and brown. coated with a nice glossy varnish. I cut and sculped over his right hand to make that bulky look. For igor, I took a lego grunt and sculpted over it to make the face. Then I painted it with a green, red for the eye, and grey on the other to make it look burnt out. For the shot gun. I took a regular G.I. Joe shot gun for the base, sculpted over it, and then painted it with a shiny silver and dull brown. The tarp was repainted a mixture of coffee bean brown and yellow. Enjoy!](userimages/customs/40000/39982-1.jpg) Megatron and Igor with Shotgun | ![[DOTM Leader Shockwave Revamp Collab with Encline] Shockwave was one of the most impressive characters from the DOTM movie and I wanted to portray that with his massive gun to his razor sharp looking armor panels. This custom was done in collaberation with the one and only ENCLINE DESIGNS. I have built this custom with alot of kitbashing, and sculpting while ENCLINE DESIGNS did the paint job and detailing. This is your chance to own a unique Leader sized DOTM SHOCKWAVE. I am starting back to college and will not be doing customizing anymore. This is the last one I am doing.
Articulation and details include:
Custom sculpted head
Custom sculpted hand
Custom sculpted sword
Custom sculpted ribcage
(I did not sculpt these, a friend did)
Balljoint head
rotating shoulders 180 degrees
Shoulder moves in and out (normal range of motion)
swivel biceps
elbow bends 180 degrees
balljoint hand and wrist individual articulated fingers
ratcheting hips in and out 180 degrees, forward and back 180 degrees
swivel upper thigh 180 degre](userimages/customs/40000/39596-1.jpg) DOTM Leader Shockwave Revamp Collab with Encline Transformers - Movieby VaderThorShockwave was one of the most impressive characters from the DOTM movie and I wanted to portray that with his massive gun to his razor sharp looking a...2 comments |
![[Battle Damaged Dotm Leader Sentinel Prime] So after seeing a few Sentinels, I decided to do one myself with a unique take on him. He's got a beautiful metallic Kandy Red paintjob with lot's of battle wear detailing, The sword and shield have been painted with Alclad II chrome and though they have battle damage they still give a good reflection! Lot's of work been done to this guy. Lots of little detailing throughout the whole figure.
Custom color mix for glowing eyes
Custom mechanical pieces added on side legs
Ball joint Head
Ball joint hands with individual articulated fingers (courtesy of fakebusker)
Custom forearm missile
Hydraulic hoses added on shoulder, abs, lower back
Custom rebuilt Back kibble with ball joint flaps for increased posabilty
Scratch built chest windows
Custom rebuilt chest for more movie accurate look
improved stability with custom heel spikes
I also have a video on him on youtube, my username is jacerc130customs](userimages/customs/39500/39129-1.jpg) Battle Damaged Dotm Leader Sentinel Prime Transformers - Movieby VaderThorSo after seeing a few Sentinels, I decided to do one myself with a unique take on him. He's got a beautiful metallic Kandy Red paintjob with lot's of ...6 comments | ![[Dotm Leader Shockwave 2.0] OK, Here he is all done, I have built this and Encline has painted it.
Articulation includes
Ball joint head
rotating shoulders 180 degrees
Shoulder moves in and out (normal range of motion)
swivel biceps
elbow bends 180 degrees
ball joint hand and wrist individual articulated fingers (courtesy of fakebusker)
ratcheting hips in and out 180 degrees, forward and back 180 degrees
swivel upper thigh 180 degrees
ratcheting knee 180 degrees
ball joint ankles
upgraded gun belt/hose (courtesy of fakebusker)
LED "EYE" with hidden button easy battery replacement on back](userimages/customs/39000/38931-1.jpg) Dotm Leader Shockwave 2.0 |
![[Optimus Prime Battle Damaged] This is my first time doing a custom. I'd just completed the details like its shoulders and repaint its weapons and just added some simple effects like the energon swords and its ion cannon which will about to fire. And I'd painted its body a little black and silver to do the battle damaged. Its is simple but it takes me 3 hours and this is the result. Hope you like it. :)](userimages/customs/38500/38304-1.jpg) Optimus Prime Battle Damaged Transformers - Movieby Jan14This is my first time doing a custom. I'd just completed the details like its shoulders and repaint its weapons and just added some simple effects lik...4 comments | ![[Custom DOTM Ultimate Shockwave] I love kit bashing Transformers and I had a blast with this one! I took a DOTM Shockwave and combined it with an Ultimate Optimus Prime and added some extra weapons. I hope you like it!](userimages/customs/38000/37616-1.jpg) Custom DOTM Ultimate Shockwave Transformers - Movieby REBNORI love kit bashing Transformers and I had a blast with this one! I took a DOTM Shockwave and combined it with an Ultimate Optimus Prime and added some...4 comments |
![[Tracks (Movieverse)] These have been done before but I thought I'd give it a shot as I have a few extra Sideswipes lying around.
I altered the head and went with the covered face looks. As far as paints go I used the the homemade blue blend I used on my Apocalypse on top of a base coat of Krylon black.](userimages/customs/38000/37565-1.jpg) Tracks (Movieverse) | ![[DOTM Leader Shockwave] Well he is finally done! Got alot of inspiration for this from Encline's Shockwave.
I used:
2007 Leader Megatron
Rotf voyager Megatron
DOTM voyager shockwave
Custom cast head and ribcage by Arteloko customs
Starscream hand from fakebuster
Tons of articulation done here,
Balljoint waist
balljoint elbows both arms
ratchet shoulders and upper arms 360 degrees
Ratchet knees
swivel upper thighs 180 degrees
Balljoint head
Balljoint writs and hand
All fingers individual articulation
Many different shades of steel, silver and titanium, with some under tones of tamiya smoke and some light touches of pavo purple to finish him off.
Battery pack is held in place by rare earth magnet as well as the back plate for easy removal and replacement of batteries. Push button on back to operate LED "eye".
I am attending BOTCON this year, anyone think I should enter this into the 3D custom competition? Give me a thumbs up if you think so!](userimages/customs/37000/36891-1.jpg) DOTM Leader Shockwave |
![[Brawl (Cybertron Mode)] In my effort to combine random fodder and junk I finally got to use my last FAB Megatron and came up with Brawl here.
Besides the Megs body he is also made from TMNT shoulder armor, that Omnibots claws, a push and go Brawl head, and various stuff lying around in my robot stuff junk bin.
After a full repaint later we have Brawl.](userimages/customs/36500/36084-1.jpg) Brawl (Cybertron Mode) | ![[Megatron Realistic 2007] This is my custom Super movie accurate 2007 Megatron. I use various transformer part to built this guy, which include Megatron. I try to make him look movie accurate as possible, I use styrene to make all the armor piece on him. This figure is non-transformable.
- Added LED for his eye.
- Mace weapon with bendible wire. .
- Movie accurate backpack.
- Give metallic paint job.
- Articulated finger.
All Hail Megatron!](userimages/customs/36000/35955-1.jpg) Megatron Realistic 2007 Transformers - Movieby customfigThis is my custom Super movie accurate 2007 Megatron. I use various transformer part to built this guy, which include Megatron. I try to make him look...6 comments |
![[Bumblebee DOTM] For this guy I removed the arms that came with him and attached some custom arms from a PVC figure from the first movie. Also customized the chest with magnets so that the grill can rotate for a more accurate look. Hope you enjoy.](userimages/customs/35500/35307-1.jpg) Bumblebee DOTM | ![[Sideswipe with Blades] Got rid of the red paint and mad custom blades that attach to the hands.](userimages/customs/35000/34715-1.jpg) Sideswipe with Blades |
![[Sideswipe] Just a repaint. Drybrushed the chest and legs and there you got G1 color scheme Sideswipe. No swords, but he doth bear arms.](userimages/customs/34000/33807-1.jpg) Sideswipe | ![[Armored Optimus Prime] ello there everyone, here's my take on what a heavily armed optimus prime might look like from the transfomers live action movies. The base figure was a leader class optimus prime that i have heavily customized. he no longer transforms but i think his overall look makes up for that. I gave him a few extra bis of armor, flip over chest armor panels, new weapons: a giant 9 barreled cannon( 12" long) + 2 new armored fists, and one of my specialized battle worn paint jobs. took quite a bit of time making this guy and i hope you all enjoy him.](userimages/customs/34000/33508-1.jpg) Armored Optimus Prime |
![[Sentinel Prime with Upgrade Kit] This is my version of Transformers DOTM Voyager Class Battle Armor Sentinel Prime made possible with custom made upgrade kit. With this upgrade kit Sentinel Prime looks amazing and much better than the stock figure. Original figure is about 6.5" with upgrade kit about 8" tall. This Custom was made out of the same figure and using random parts from other transformers figures. This idea came to me as I was going through and cleaning the transformers junk yard I have home. This is a very interesting custom one of a kind because I used different parts that actually snap on the figure only the chest plate is attached by a magnet the rest is just a very precise and tight snap on technique, The armor in the arms can be attached all the way in covering the fist creating a super knuckle punch weapon or can be left with the fist facing out so can hold the weapons , The feet tips have a bit of articulation so it can balance the figure depending on the pose. The figure can](userimages/customs/33500/33374-1.jpg) Sentinel Prime with Upgrade Kit | ![[Shockwave] took a leader class 2007 megatron and went berserk on it, hacked the crap put of it, sculpted a bunch of the body details, gave him a new head, light up eye, a new big 'ole cannon of an arm, and poseable fingers! oh and a spiffy paint job if i say so myself. hope you all like him!](userimages/customs/33000/32940-1.jpg) Shockwave |
![[Custom Transformers CLIFFJUMPER] I wanted to do an Autobot that didn't make it into the Transformers films and I was inspired by the customizer BISHART'S design of CLIFFJUMPER so I decided to try my own version.
Using a Leader Class Bumblebee I scratch kit built and sculpted this character. I hope you like'em!](userimages/customs/33000/32823-1.jpg) Custom Transformers CLIFFJUMPER Transformers - Movieby REBNORI wanted to do an Autobot that didn't make it into the Transformers films and I was inspired by the customizer BISHART'S design of CLIFFJUMPER so I de...3 comments | ![[Shattered Glass Sunstreaker] This is my version of Transformers Shattered Glass Sunstreaker it was made out of a DOTM Human alliance Roadbuster with an Alternator Sunstreaker head. Made him inspired by Alternators deadend colors. Still transforms into car mode, transformation is still the same I just do it in a different way in bot mode like seen in the pictures, as for car mode transformation changes a bit and looks just like in the pictures.](userimages/customs/32500/32373-1.jpg) Shattered Glass Sunstreaker |
|