![[Barbarian Dwarf King] I had a spare LOTR Dwarf Action Figure. I wanted to make something barbaric,rad and cute at the same time..
So I removed some of the armors and sculpted the the mawhawk hair, made his body with 6 packs lots of body piercings.I used fast drying EPOXY WATER STOP CLAY..it dries within 10 minutes so you need to be fast in sculpting
He is supposed to be the Dwarf Barbarian King or Troll maybe..I dunno but i just like him short and bad!
Hope you liked him..](userimages/customs/49500/49263-1.jpg) Barbarian Dwarf King Warhammerby cuztomizaI had a spare LOTR Dwarf Action Figure. I wanted to make something barbaric,rad and cute at the same time..
So I removed some of the armors and sculp...13 comments | ![[Iron Marines Drop Pod] Another one of my Iron Marines Vehicles. My Drop Pod has six blue LEDs and hidden switch in its base. Bottom of the Pod includes battery and is openable. I used magnets to make sure it stays locked in place. Another magnet is hidden within weapon. This allows you to switch between machine gun and rocket launcher. The turret can rotate and move up/down. I also used some magnets on Openable exit hatches and engine. This prevents Pod from unwanted opening. As usual I used my custom Iron Marines Colors. I hope You like it.](userimages/customs/45000/44673-1.jpg) Iron Marines Drop Pod Warhammerby GladkyAnother one of my Iron Marines Vehicles. My Drop Pod has six blue LEDs and hidden switch in its base. Bottom of the Pod includes battery and is openab...1 comments |
![[Iron Marines Terminators] This time I would like to present You my Iron Marines Terminator Squad. As You can see it includes Iron-man (sculpted new head, arc reactor and repulsors), mark I armor (custom head, torso, minor battle damage), War Machine (custom head, added some armor parts, rocket launcher and few smaller details) They lead the Iron Terminators. Each figure has magnets in hands, that allow you to change weapons. They are also equipped with arc reactors and repulsors. All figures have custom paintjob and bases.](userimages/customs/45000/44593-1.jpg) Iron Marines Terminators Warhammerby GladkyThis time I would like to present You my Iron Marines Terminator Squad. As You can see it includes Iron-man (sculpted new head, arc reactor and repuls...3 comments | ![[Iron Marines Land Raider Crusader/ Redeemer] Another of my Iron Marines customs. This time It is my Land Raider. I added 4 white LEDs as headlights and 3 red LEDs inside engine (as taillights) and Inside Land raider. There are two hidden switches on the back so each colour can be turned on separately. The interior is fully painted. All the seals are openable. Turrets rotate and can be switched. Grenade launchers have magnets, so you can detach them. The same concerns antena. Also Bolters and flame throwers on both sides of vehicle have magnets and can be switched (crusader or redeemer). As You can see it can be adopted to any battle :) Hope You like it.](userimages/customs/44500/44259-1.jpg) Iron Marines Land Raider Crusader/ Redeemer Warhammerby GladkyAnother of my Iron Marines customs. This time It is my Land Raider. I added 4 white LEDs as headlights and 3 red LEDs inside engine (as taillights) an...4 comments |
![[Iron Marines Hulkbuster Dreadnought] I decided to customize my space marines figures to resemble Iron Man. I like to call them Iron Marines:). First one I would like to show You is my Dreadnought. I added 2 LEDs and battery (behind figure) - hands are still articulated. There are also few minor changes compared to original Dreadnought. The base is also completely custom made. Barbed wire is connected on one side to camouflaged button activating LEDs](userimages/customs/44000/43914-1.jpg) Iron Marines Hulkbuster Dreadnought Warhammerby GladkyI decided to customize my space marines figures to resemble Iron Man. I like to call them Iron Marines:). First one I would like to show You is my Dre...3 comments | ![[Full Loaded General. Marine, War Hammer] have to custom cresh hands and boots. made the gun and sword whit varios spawn weapons. a lot of sculpting job. then the mufas for the shoulders, y custom the head. and there, a big bad figure, whit that look of cause i said so..thanks for watching.](userimages/customs/43000/42506-1.jpg) Full Loaded General. Marine, War Hammer Warhammerby dark daggerhave to custom cresh hands and boots. made the gun and sword whit varios spawn weapons. a lot of sculpting job. then the mufas for the shoulders, y...3 comments |
![[Night Lord Chaos Space Marine] Okay, I made this one by request of a friend. It's a Warhammer 40k Chaos Space Marine with a power sword and a twin bolter. Just about everything you see on this figure has been hand-sculpted, minus the base figure underneath all that Aves Apoxie.
Some recipes:
Power Pack (on back): Cut out of toy package cardboard and glued together (hollow) to form a base to sculpt around. This helps it not tip the figure over from excess weight and it saves me on materials. The rest is sculpt and four rubber tubes.
Weapons: They are both pretty much popsicle sticks sculpted over with apoxie.
Shoulder Armor: These were difficult for me to do. They are fixed to the biceps, but they pivot (tightly I might add) on a bamboo skewer so they are able to tilt up and down. This allows the arms underneath to move laterally away from the hips as well as forward and backward pretty freely. The bamboo skewer inside is actually wedged into holes drilled into popsicle sticks embedded into the pauldro](userimages/customs/38500/38465-1.jpg) Night Lord Chaos Space Marine Warhammerby H.DamienOkay, I made this one by request of a friend. It's a Warhammer 40k Chaos Space Marine with a power sword and a twin bolter. Just about everything yo...13 comments | ![[Tabletop Gaming Mini] This was a metal tabletop gaming miniature that I picked up on the cheap and decided to give it a try. This was the first of this kind of figure I have ever worked on.
The base was made from a candle holder, cork, styrofoam and ballist.
Thanks for looking!](userimages/customs/38500/38300-1.jpg) Tabletop Gaming Mini Warhammerby K2CustomsThis was a metal tabletop gaming miniature that I picked up on the cheap and decided to give it a try. This was the first of this kind of figure I ha...5 comments |
![[Chosen of Nemeroth Chaos Space Marine Biker] This is a old model that I've kept in my room,I was excited about this contest,so I repainted and added a little more detail to the model.The Chaos Marine looks cool when he is on the bike and the bike give a demonic feel.I spray primed it with citadel chaos black spray,this is a trick to base coat the whole model including the inside detail of the bike.I spent 4 days to get the whole miniature painted.I used the color scheme of the chaos space marine that appeared in the game warhammer 40k space marine.I added some scars to the head,using a hobby knife and putty,then I highlighted it.The scar and scratches on the model looks realistic and awesome.](userimages/customs/35000/34742-1.jpg) Chosen of Nemeroth Chaos Space Marine Biker Warhammerby metallicseekerThis is a old model that I've kept in my room,I was excited about this contest,so I repainted and added a little more detail to the model.The Chaos Ma...1 comments | ![[Tau Fire Warrior] This custom was made from a UFC Deluxe fighter and some apoxie. Painted with Citadel and Testors. The weapon is two popsicle sticks taped together and sculpted over with apoxie. The backpack was fashioned out of cardboard and sculpted around. Almost everything you see on the figure is manipulated in some way with sculpt except the biceps. I hope everyone enjoys it.](userimages/customs/34000/33766-1.jpg) Tau Fire Warrior Warhammerby H.DamienThis custom was made from a UFC Deluxe fighter and some apoxie. Painted with Citadel and Testors. The weapon is two popsicle sticks taped together a...5 comments |
![[12" Warhammer Giant] Got a Gwarp, hacked and sanded down his head, chopped his toes and fingers off, rebuilt face, hands and feet with putty.
Cast several skulls from a quick mold i made from another fig, made beard from putty and wire, and hair from latex melted onto wire to make it posable.
Made him a weapon out of putty on a chopstick and some bits of plastic.
Painted it all up, and made some pants.](userimages/customs/32500/32279-1.jpg) 12" Warhammer Giant Warhammerby jumbokaggraGot a Gwarp, hacked and sanded down his head, chopped his toes and fingers off, rebuilt face, hands and feet with putty.
Cast several skulls from a qu...0 comments | ![[Trygon ( Warhammer)] Hey everyone! back again with something a little different, this is a piece a friend of mine had me paint for him it is Trygon from Warhammer. I still know noting about the game and don't understand it. I don't play but once again took another chance to paint something from the game because a lot of the pieces are really cool looking, this is my second Warhammer piece and hope to do more.
Trygon was painted to owner's specifications and he gave me permission to post his item when complete so here it is and let me know what you think ?
the last pic with the heroclix is to show scale](userimages/customs/32500/32186-1.jpg) Trygon ( Warhammer) Warhammerby 3bcustomsHey everyone! back again with something a little different, this is a piece a friend of mine had me paint for him it is Trygon from Warhammer. I still...5 comments |
![[Necron God - Nightbringer] The Nightbringer is death incarnate, a sadistic god with the power to unmake the stars. It delights in inflicting pain and suffering not only to feed but simply because it can.
I've been a fan of the Necron faction right after I saw someone use this race in a hobby shop when I used to hangout. I used a Resaurus Ken figure for the body and Resaurus Vega for the arms. The head is sculpted from scratch same goes with the rock base. There are three figures on the base one is a dead space marine which is sculpted, a modified Mage Knight figure to another fallen marine then a Hero Clix Multiplex modified to a Necron Lord. The scythe handle is made from an old paint brush and the blade sculpted. I'm not good working with real cloth so I used tarpaulin paper for the tattered cloak and the Necron Lord's cape.](userimages/customs/31500/31494-1.jpg) Necron God - Nightbringer Warhammerby raiyuriThe Nightbringer is death incarnate, a sadistic god with the power to unmake the stars. It delights in inflicting pain and suffering not only to feed ...9 comments | ![[Ciaphas Cain] Warhammer 40,000...actually. The Imperial Commissar was made using a Mattel WWE figure. Legs were repositioned, sculpted all of the costume and details. Modded an M16 for his bolter and built the chainsword from random materials until I was satisfied it was tough enough.](userimages/customs/31500/31475-1.jpg) Ciaphas Cain Warhammerby G BrandWarhammer 40,000...actually. The Imperial Commissar was made using a Mattel WWE figure. Legs were repositioned, sculpted all of the costume and deta...15 comments |
![[SEVERE & DEVORA Warhammer] A wrong dice roll result would mean death from the swords and weapons of these table top game blade stricken twins!
Recipe:
Repainted and sculpted the faces of Satana AF. Weapons and swords are made from toothpicks and plastic coffee stirer.
Took pictures of them in front of the computer with bronx like background so it would make it appear 3D...](userimages/customs/31500/31444-1.jpg) SEVERE & DEVORA Warhammer Warhammerby cuztomizaA wrong dice roll result would mean death from the swords and weapons of these table top game blade stricken twins!
Recipe:
Repainted and sculpted t...2 comments | ![[Timett Skarrson - Space Wolf] Ok first off I hope Warhammer 40,00 counts as tabletop, cus i used to play the shite out of it when i was in my teens. My favourite army, the galactic vikings known as the Space Wolves. When i saw this comp i knew i had to unleash the kid in me. Sadly i have been ill most of the month and getting the paintjob the way i wanted never quite happened. But live and learn better to submit than regret.
Ok so for Timett I took most of a comic book 1st appearance iron man and swapped the lower legs with deep sea iron man. The head came from a weapon x wolverine and the troublesome shoulder pads came from judge dredd, they were either his knee or elbow pads, not sure which tho. I did have to take a bit of artistic liscence here tho, as if i had added the full size shoulder pads all pivoting movement would be lost in the shoulder. Like wise he backpack (made from a galactic clone marine and 2 joe helmets) has also been scaled down, to allow for rolling movement in both shoulders. Had i been true](userimages/customs/31500/31418-1.jpg) Timett Skarrson - Space Wolf Warhammerby captainsniktOk first off I hope Warhammer 40,00 counts as tabletop, cus i used to play the shite out of it when i was in my teens. My favourite army, the galactic...3 comments |
![[Warhammer 40k Ultramarine] Proud to present my first custom figure of any real magnitude. Base was a UFC fighter (can't remember which) and a John Cena head. Everything else on the figure is hand-sculpted and painted. The figure looks rough, but that was done on purpose. I didn't iron out all the flaws, and left them in for a grittier look. I wanted him to look like he'd been through hell and back. He stands at 7.5 inches tall and feels heavy and sturdy.
I had no idea what I was doing when I started this thing, and learned a few tricks along the way. It was not an easy figure to make for a novice. It maintains great articulation, however, and can be posed in many different fashions. He even stands up on his own! The backpack is removable, even though there's no real reason to do so. It doesn't unbalance the figure because it's hollow, and sculpted around a cardboard base. He also packs a fully sculpted bolter and chain sword.
I hope everyone enjoys it. Happy customizing.](userimages/customs/31500/31043-1.jpg) Warhammer 40k Ultramarine Warhammerby H.DamienProud to present my first custom figure of any real magnitude. Base was a UFC fighter (can't remember which) and a John Cena head. Everything else o...7 comments | ![[Warhammer Tank] I myself don't play Warhammer, but I was more than willing to take up the challenge to paint one of these badboys. the only thing the owner requested was that it be painted with army camo and have a black widow logo, I would say I put in about 60+ hours on this sucker (never happy with way camo turned first few times I painted, so I did again, again & again until the end result, and thats what you see.....let me know what you think!! Mr.T
Sorry about last pic, it's a bad angle, just wanted to show bottom of Tank](userimages/customs/26000/25895-1.jpg) Warhammer Tank Warhammerby 3bcustomsI myself don't play Warhammer, but I was more than willing to take up the challenge to paint one of these badboys. the only thing the owner requested ...5 comments |
![[The Emperor] This is one of my bigest pieces to date. its a curt angle figure totaly sculpted over with apoxy. this figure took me two months to do and even know he has all that armor he still has most of his articulation. with this being my best peice please feel free to let me know what you think.](userimages/customs/19500/19085-1.jpg) The Emperor Warhammerby Invincible-ToysThis is one of my bigest pieces to date. its a curt angle figure totaly sculpted over with apoxy. this figure took me two months to do and even know h...13 comments | ![[Minotaur Standard Bearer] I was looking thru TRU a few weeks ago and picked up a few of the Narnia Prince Caspian figures as they were going cheap. I was going to make a Minotaur Lord but decided to make a Warhammer Standard Bearer with this figure as it just loked the part. Everything was painted and drybrushed with Games Workshop paints and pastels.
RECIPE
Minotaur - As mentioned above the figure is from the Prince Caspian range, the figure was basically left as is except for the left horn which was cut to simulate battle damage. A nose ring was added using a small O-ring and leather skirts were added, the axe has been shortened and the top blade removed.
Standard - The poles are made from balsa wood with model ship rope used to tie both sections together, the chains and O-rings are from a $2 shop and the skulls are from Hasbro's Indiana Jones Pitfall playset. The flag is from a old piece of material I had lying around my 4 yr old daughter helped me with the drawings it's a little to one side but I didn't](userimages/customs/15000/14866-1.jpg) Minotaur Standard Bearer Warhammerby HembleI was looking thru TRU a few weeks ago and picked up a few of the Narnia Prince Caspian figures as they were going cheap. I was going to make a Minota...0 comments |
![[Necron Lord] I like making figures that no one has seen or attempted before, even if it's a well known character. And because of the lack of warhammer customs out there, I'm focusing on the 40k universe. There are so many cool characters to choose from and I think they really put my skills to the test.
I decided on a Necron because I had a couple Judge Deaths lying around and the skeletal frame really suits it. More specifically a Lord because they are more visually appealing. On the distant horizon will be some space marines(and chaos) but, I haven't figured out a way to do the armor with minimal sculpting. That, and they're so freaking massive to begin with. So for now I'm focusing on human sized and shaped characters(since I already have the bodies lined up). So in the vein of 40k I plan on some Eldar, Imperial Guard maybe, and perhaps some tau Fire Warriors.
I sanded down the entire body and head as much as I could, more so on the mid section to create that 'spine' he has. Then sculpting and](userimages/customs/13000/12778-1.jpg) Necron Lord Warhammerby spawnsauceI like making figures that no one has seen or attempted before, even if it's a well known character. And because of the lack of warhammer customs out ...12 comments | ![[Eldrad Ulthran - Eldar Farseer] "What do humans know of our pain? We have sung songs of lament since before your ancestors crawled on their bellies from the sea."
- Farseer Eldrad Ulthran
Before Man even existed, the Eldar empire already had the galaxy within its grasp. At the peak of their power whole planets could be made and unmade with thought, even the stars themselves shuddered at their might. Then came The Fall. Their empire destroyed from within and countless billions were killed. Those that survived were left planetless and drifted in space in huge ships called craftworlds.
This then left the galaxy open to intruders and those seeking conquest. After The Fall, Man, along with others were able to tread through the galaxy unhindered by the Eldar,who were all but recovered. Although they don't view mankind as that big a threat, other numerous races are now in the way of Eldar dominance, which they will attain again by any means necessary.
Eldrad Ulthran was the mightiest and most ancient of the F](userimages/customs/5500/5073-1.jpg) Eldrad Ulthran - Eldar Farseer Warhammerby spawnsauce"What do humans know of our pain? We have sung songs of lament since before your ancestors crawled on their bellies from the sea."
- Farseer...13 comments |
![[Apache] I saw a an iteresting characterin warcraft comics preview. o I decided to customized him. I did some twist t make it more interesting.. I was inspired by an AMERICAN INDIANS and since this character similar to a Indians I added more feathers..To add more feathers on his cap..](userimages/customs/5500/5060-1.jpg) Apache Warhammerby cuztomizaI saw a an iteresting characterin warcraft comics preview. o I decided to customized him. I did some twist t make it more interesting.. I was inspired...1 comments | ![[Tau XV88 Broadside Battlesuit] In the future, there is only war.
Amongst the many battlefield weaponry, tanks are a commen sight, grinding their way across the field to inflict damage on the enemy. All are huge, tracked and provide heavy support. All are easily seen and primary targets... except for the Tau's Broadside.
To be fair, the Tau do have more recognisable tanks, but these two legged deathdealers have the advantage of being able to hide behind relatively small pieces of cover, emerging for a shot from their massively powerful Railguns and then ducking back into cover. The backup weapons of Missile pods allows them to fire into the air,then have them lock on to a designated target - often benefitting from a markerlight - and deliver pinpoint hits on chosen targets. Broadsides are highly dangerous, capable of taking out a tank with a single shot, and should never be taken for granted.
The following images are the only known closeups of a Broadside, taken by a tank lucky enough to have been able to charge](userimages/customs/4500/4260-1.jpg) Tau XV88 Broadside Battlesuit Warhammerby KernIn the future, there is only war.
Amongst the many battlefield weaponry, tanks are a commen sight, grinding their way across the field to inflict da...2 comments |
![[Tau XV8 Crisis Battlesuit, Shas'Vre Varient] The Tau are a relatively young but highly technological race. They are current in a cycle of expansion, and have proven to be a more than capable match for older, more established empires.
In combat, the Tau are masters of long range weaponary, laying down lethal amounts of firepower from their Fire Warrior ground troops whilst the jetpacked Crisis Battlesuits move closer to deal with tougher opposition. Each suit is capable of carrying three weapon systems - though most carry only two - and various hard wired systems allow them to increase both accuracy and speed. This perticuler battlesuit is designated a Troopkiller, equipped with a five-per-shot armour piercing Ion blaster, and a munitions launcher, ejecting mini bomblets designed to explode at a short height over enemy troops.
Recipe: Basic Tau Crisis Battlesuit with Cyclonic Ion blaster and Airbursting Fragmentation Launcher options.](userimages/customs/4500/4259-1.jpg) Tau XV8 Crisis Battlesuit, Shas'Vre Varient Warhammerby KernThe Tau are a relatively young but highly technological race. They are current in a cycle of expansion, and have proven to be a more than capable matc...2 comments | |
|