![[Daryl Dixon and Motorcycle [Season 3]] This figure has been on my work bench since Season 2 of 'The Walking Dead' but I lost interest in it in favor of other projects, but when Season 3 began I felt the push to finish it, and as a result ended up going with his 3rd season outfit.
The figure started as a deluxe Angel figure from Buffy. I popped his arms and head off and cut the sleeves off of Angel's jacket to turn it into a vest.
Next I sculpted rips in his pants and extended his button up shirt.
I then added the arms from an Avatar Movie Masters Col. Miles Quatrich. I had to widen the arm holes in the torso to get the larger shoulders to fit, but they sit nice and snug now.
The head was originally Tobey Macguire from the Spider-Man 1 line, with resculpted hair and slight changes to the face.
Daryl's bow came from the Daryl figure by MacFarlane Toys, so it is slightly out of scale but still works well. His knife came from ROML Bucky Capatain America.
Finally everything from top to bottom was painted and sealed.
The Motor](userimages/customs/50500/50260-1.jpg) Daryl Dixon and Motorcycle [Season 3] Walking Deadby X-Fan#1This figure has been on my work bench since Season 2 of 'The Walking Dead' but I lost interest in it in favor of other projects, but when Season 3 beg...2 comments | ![[Shane Walsh Season 2] Figures & Materials used:
Merle Dixon Series 3 (middle torso, lower body, & upper arms)
Shane Walsh Series 2 (head & feet)
Captain Jacob Keyes (lower arms)
epoxy (shirt, side pants pockets & padded jacket collar)](userimages/customs/50500/50247-1.jpg) Shane Walsh Season 2 Walking Deadby gcbadamsFigures & Materials used:
Merle Dixon Series 3 (middle torso, lower body, & upper arms)
Shane Walsh Series 2 (head & feet)
Captain Jacob K...6 comments |
![[Rick Grimes Season 3] Figures & Materials used:
Rick Grimes Series 2 (entire body)
epoxy (shirt, top part of head)](userimages/customs/50500/50246-1.jpg) Rick Grimes Season 3 | ![[Dale Horvath Season 2] Figures& Materials used:
Merle Dixon Series 3 (legs, middle torso, upper sleeves or arms, feet, and head)
Rick Grimes Series 1 (lower arms)
epoxy (beard, hat, and side pants pockets)](userimages/customs/50500/50210-1.jpg) Dale Horvath Season 2 Walking Deadby gcbadamsFigures& Materials used:
Merle Dixon Series 3 (legs, middle torso, upper sleeves or arms, feet, and head)
Rick Grimes Series 1 (lower arms)
epoxy ...2 comments |
![[Shane Walsh Season 2] Figures& Materials used:
Rick Grimes Series 2 (upper body& holster)
Merle Dixon Series 3 (lower body)
Shane Walsh Series 2 (head and feet)
epoxy (hair& side pants pockets)](userimages/customs/50500/50209-1.jpg) Shane Walsh Season 2 Walking Deadby gcbadamsFigures& Materials used:
Rick Grimes Series 2 (upper body& holster)
Merle Dixon Series 3 (lower body)
Shane Walsh Series 2 (head and feet)
epo...1 comments | ![[Rick Grimes Season 2] Figures& Materials used:
Rick Grimes Series 1 (head, shoulders or sleeves, and badge).
Rick Grimes Series 2 (Lower body, middle torso, lower arms, and hat).](userimages/customs/50500/50183-1.jpg) Rick Grimes Season 2 Walking Deadby gcbadamsFigures& Materials used:
Rick Grimes Series 1 (head, shoulders or sleeves, and badge).
Rick Grimes Series 2 (Lower body, middle torso, lower arms,...1 comments |
![[Daryl Dixon Season 3] Figures& Materials used:
Daryl Dixon Series 1 (head, arms, feet, & sheath).
Merle Dixon Series 3 (Lower body& middle torso).
epoxy (shirt)](userimages/customs/50500/50182-1.jpg) Daryl Dixon Season 3 Walking Deadby gcbadamsFigures& Materials used:
Daryl Dixon Series 1 (head, arms, feet, & sheath).
Merle Dixon Series 3 (Lower body& middle torso).
epoxy (shirt)...7 comments | ![[Hershel Greene Season 3] Figures& Materials used:
Series 2 Rick Grimes (head& torso)
Series 3 Merle Dixon (lower body)
epoxy(upper head, hair, beard, suspenders, and shirt).](userimages/customs/50500/50136-1.jpg) Hershel Greene Season 3 Walking Deadby gcbadamsFigures& Materials used:
Series 2 Rick Grimes (head& torso)
Series 3 Merle Dixon (lower body)
epoxy(upper head, hair, beard, suspenders, and s...5 comments |
![[Rick Grimes Season 3] Figures& materials used:
Series 1 Rick Grimes (head& knees).
Series 2 Rick Grimes (body).
epoxy (shirt& added hair).](userimages/customs/50500/50134-1.jpg) Rick Grimes Season 3 Walking Deadby gcbadamsFigures& materials used:
Series 1 Rick Grimes (head& knees).
Series 2 Rick Grimes (body).
epoxy (shirt& added hair)....2 comments | ![[Rick Grimes V.3] Sorry for slamming you guys with all my different Rick figures but whatever, here is my latest rick. Gave him a newly painted shirt, modded hair, and heavily modded coat. I also painted the pants with a flat black as opposed to last time, I painted him with a gloss black. Other simple mods here and there and BOOM! Rick grimes is done. Hope you like! -Cole](userimages/customs/50000/49886-1.jpg) Rick Grimes V.3 Walking Deadby ColetheCreatorSorry for slamming you guys with all my different Rick figures but whatever, here is my latest rick. Gave him a newly painted shirt, modded hair, and ...7 comments |
![[Daryl Dixion - the Walking Dead] Used a Kyle Reese Based with Freddy Kruger arms. Random hands , Custom Casted Head. T-800 jacket. Basically made the crossbow from scratch. Head Cast on this one wasn't perfect but the next one is looking great. Hope to add 7" Scale Rick & Carl next.](userimages/customs/50000/49556-1.jpg) Daryl Dixion - the Walking Dead Walking Deadby Magnum PIUsed a Kyle Reese Based with Freddy Kruger arms. Random hands , Custom Casted Head. T-800 jacket. Basically made the crossbow from scratch. Head Cast ...4 comments | ![[Rick Grimes] This is an update version of Rick. I modified the face and the hair, gave the whole figure a new paint job, and finally made him a jacket. Hope you like. -Cole](userimages/customs/49500/49322-1.jpg) Rick Grimes Walking Deadby ColetheCreatorThis is an update version of Rick. I modified the face and the hair, gave the whole figure a new paint job, and finally made him a jacket. Hope you li...2 comments |
![[Dayrl Dixon] A Hot toys body with a joey callahan headsculpt repainted , dragon clothes dyed ,altered and weathered a vts waistcoat and boots repainted .
The rest of accessories crossbow, arrows and sheath , bedpack are all made by myself](userimages/customs/49500/49206-1.jpg) Dayrl Dixon Walking Deadby grahamlokiA Hot toys body with a joey callahan headsculpt repainted , dragon clothes dyed ,altered and weathered a vts waistcoat and boots repainted .
The rest ...3 comments | ![[Rick Grimes] A kings toys body repainted a joey callaham custom head sculpt repainted
various clothes altered and weathered
custom boots repainted and weathered home made custom belt
sideshow indiana revolver repainted silver
aci machine gun](userimages/customs/49500/49173-1.jpg) Rick Grimes Walking Deadby grahamlokiA kings toys body repainted a joey callaham custom head sculpt repainted
various clothes altered and weathered
custom boots repainted and weathered ...1 comments |
![[Merle Dixon] A hot toys body repainted some dragon clothes altered and weathered boots repainted
A custom headscupt by joey callaham repainted arm made out of parts and painted](userimages/customs/49500/49172-1.jpg) Merle Dixon Walking Deadby grahamlokiA hot toys body repainted some dragon clothes altered and weathered boots repainted
A custom headscupt by joey callaham repainted arm made out of par...1 comments | ![[The Walking Dead Prison] Prison made entirely of foam board and mesh for the fence then painted, sorry there isn't any walkers or figures in the pics i put it on eBay and used the same pics and didn't want people to think they get figures, thanks for looking](userimages/customs/49500/49082-1.jpg) The Walking Dead Prison Walking Deadby RicktatorshipPrison made entirely of foam board and mesh for the fence then painted, sorry there isn't any walkers or figures in the pics i put it on eBay and used...17 comments |
![[Rick] I used series 2 Rick for most of this. Sculpted the head and the shirt. Also used Merle's legs and gave him a paint job. Hope you like! -Cole](userimages/customs/49000/48945-1.jpg) Rick Walking Deadby ColetheCreatorI used series 2 Rick for most of this. Sculpted the head and the shirt. Also used Merle's legs and gave him a paint job. Hope you like! -Cole...4 comments | ![[Merle Dixon] With the 3rd season of The Walking Dead over it's no surprise by now that Merle Dixon didn't make it. He gave a valiant effort towards the end but was shot by the Governor and turned into a walker. Here I took the regular release Merle and removed the two bitten-off fingers from his left hand, replaced the bayonet with a real metal spike belted on, and went about removing pouches/filling the peg holes. The bullet hole in his chest and exit wound in his back were sculpted on and was a dangling piece of meat on his lip. One zombied-up paint job later that included the grey veins, wet bloody look, and Merle was ready for his final act.](userimages/customs/49000/48525-1.jpg) Merle Dixon Walking Deadby Jin SaotomeWith the 3rd season of The Walking Dead over it's no surprise by now that Merle Dixon didn't make it. He gave a valiant effort towards the end but was...5 comments |
![[Walker Merle] Really happy with this custom. Wanted to make one the minute I saw him appear on last week's episode. I plan on selling this one and possibly making a few more because it was so much fun.](userimages/customs/48500/48467-1.jpg) Walker Merle Walking Deadby afirewillriseReally happy with this custom. Wanted to make one the minute I saw him appear on last week's episode. I plan on selling this one and possibly making a...6 comments | ![[Rick Grimes (Comic Book)] Hey guys. This Rick was made from an ROML3 punisher body with interchangeable sota remy heads. A lot of sculpting here and there. I also kept his hand on as he looked badass with the shotgun, so I guess you casn say this is pre-governor rick. A lot of sculpting on both heads. I gave him a look from the start of the comic and further into the apocalypse.
Thanks for looking :)](userimages/customs/48500/48455-1.jpg) Rick Grimes (Comic Book) Walking Deadby thejado101Hey guys. This Rick was made from an ROML3 punisher body with interchangeable sota remy heads. A lot of sculpting here and there. I also kept his hand...4 comments |
![[Carl Grimes] Hey guys. Today I present Carl Grimes of the walking dead tv series. He was made from a mcfarlane rick body, faceoff daredevil head modified and resculpted with a tv series 2 rick hat. The symbol on his shirt isnt quite accurate but I'm pretty happy with the overall look.
Thanks for looking :)](userimages/customs/48500/48454-1.jpg) Carl Grimes Walking Deadby thejado101Hey guys. Today I present Carl Grimes of the walking dead tv series. He was made from a mcfarlane rick body, faceoff daredevil head modified and rescu...2 comments | ![[Zombie Merle] Just a complete repaint with multiple layers of dry brushing and washes. Brought out out his cheek bones and sunk his eye sockets into his head...basically tried to bring out more of the bone structure in his face. I even removed his 2 fingers from his hand.
Thanks for looking!](userimages/customs/48500/48439-1.jpg) Zombie Merle |
![[Custom Rick Grimes Action Figure] Took different parts from each series of ricks and changed him up and added Merles legs](userimages/customs/48500/48407-1.jpg) Custom Rick Grimes Action Figure | ![[Daryl Dixon] I wasnt happy with the original figure he looked odd so i gave him a basic repaint of daryl sculpted hair and rip in his pants, sculpted shirt buttons and collar, gave him the vest off one of the walking dead zombies and painted it black with the wings on the back, I also made a quiver using a lid for my paint brush painted it green and glued a button on the bottom to stop the arrows falling out.. I also sculpted 4 arrows,
Hope you like comments welcome. Thanks for looking
UPDATE! Added a poncho,](userimages/customs/48000/47859-1.jpg) Daryl Dixon Walking Deadby RicktatorshipI wasnt happy with the original figure he looked odd so i gave him a basic repaint of daryl sculpted hair and rip in his pants, sculpted shirt buttons...6 comments |
![[Daryl Dixon] Same as last Daryl but I completely sculpted him a shirt like he wore in the season 3 midseason finale. Also changed his legs for those of btvs deluxe angel and made him a new crossbow and repainted him head to toe.
Thanks for looking! :)](userimages/customs/48000/47848-1.jpg) Daryl Dixon Walking Deadby thejado101Same as last Daryl but I completely sculpted him a shirt like he wore in the season 3 midseason finale. Also changed his legs for those of btvs deluxe...8 comments | ![[Deputy Rick Grimes (Season 1)] Hey guys! Finished my season 3 Rick so I thought I'd do a season 1 one as well. it's not entierly accurate but I'm pretty happy with the overall look. Unfortunately I lost his revolver just before I took pics :(
recipe:
Hat: Jonah Hex
head: modded alex mercer with neck cut off and ball joint put up in head
upper body: Gordon with a lot of added sculpt
forearms: Neca hunger games with Gordon left hand
legs: BTVS deluxe spike
Guns: fodder
Thanks for looking!](userimages/customs/48000/47847-1.jpg) Deputy Rick Grimes (Season 1) Walking Deadby thejado101Hey guys! Finished my season 3 Rick so I thought I'd do a season 1 one as well. it's not entierly accurate but I'm pretty happy with the overall look....9 comments |
![[The Governor] quite a basic custom and it's not 100% accurate but I'm pretty happy with the overall look. Just a winter soldier with a modified face and took of his robotic arm. painted and that's pretty much it. Also got a comic book Rick Grimes in the works and a completed tv series governor which I will upload soon.
thanks for looking, comments appreciated :)](userimages/customs/48000/47712-1.jpg) The Governor Walking Deadby thejado101quite a basic custom and it's not 100% accurate but I'm pretty happy with the overall look. Just a winter soldier with a modified face and took of his...8 comments | ![[Rick Grimes (Season 3)] Hey guys, been pretty busy with walking dead customs recently but haven't been able to find time to post them. Got a lot more coming! I guess I'll just start with Rick Grimes as he's my favourite so far. Also, I've re-done some of my old walking dead figures so I'll try and get updated pics for them too.
recipe:
Head: quicksilver modded
upper body: warpath and dp 2 pack variant deadpool fully sculpted over
legs: BTVS deluxe spike
weapons: fodder and sculpted
Thanks for looking, comments appreciated :)](userimages/customs/48000/47711-1.jpg) Rick Grimes (Season 3) Walking Deadby thejado101Hey guys, been pretty busy with walking dead customs recently but haven't been able to find time to post them. Got a lot more coming! I guess I'll jus...12 comments |
![[AMC Deputy Rick Grimes 1:12th Scale Season 1] I have been so busy/lazy the last two or three weeks that I havent cranked out as many customs as I would have liked but I finally finished AMC THE WALKING DEAD Deputy RICK GRIMES and DARYL DIXON. I will post Daryl as soon as I finish his photos. Thank you guys for the preorders if you are on the Realm for making, making them possible. They are all shipping this week with Daryl and Shane. Thanks again for your patience.
I altered three heads for him although the photos are only of one of the heads. Didnt finish painting the others with a closed mouth and longer hair in time for photos. I went with this head because he has more of that fighting intensity one would think you would have if you were fighting zombies. I am probably going to go back and do a resculpt on the stars as I originally wanted them smaller especially on the hat but I just wanted to get this one off the to do list for now.
He was primed, painted, color-washed and sealed meticulously to have a thin seemless coat on](userimages/customs/48000/47679-1.jpg) AMC Deputy Rick Grimes 1:12th Scale Season 1 Walking Deadby D&DCUSTOMSI have been so busy/lazy the last two or three weeks that I havent cranked out as many customs as I would have liked but I finally finished AMC THE WA...15 comments | ![[Negan: Leader of the Saviors] Howdy all. Even though I'm not concentrating on Walking Dead customs, I thought this guy would be fun to make. Since I haven't seen any other attempts at him, and the fact that anybody that frappes the skull of a founding character without a second thought deserves his own figure, I present the leader of the Saviors, Negan! Upper half is HML Punisher with fully sculpted jacket and Jack Knight's collar. Bottom half is a stock bushwhacker. The Punisher head was cut and opened up in the center to widen it and then the forehead and hair was sculpted on. The face was restructured as well. Nothing too crazy but I think he represents well enough.
What do ya think? Thanks for checkin in! Keep on blasting! T](userimages/customs/47500/47003-1.jpg) Negan: Leader of the Saviors Walking Deadby ole jade jawHowdy all. Even though I'm not concentrating on Walking Dead customs, I thought this guy would be fun to make. Since I haven't seen any other attemp...21 comments |
|