![[Dragon Ball Z] I had a few dbz figures , I used some Tape a few pieces of wood and paint and tissue to make the back ground ...](userimages/customs/49500/49390-1.jpg) Dragon Ball Z | ![[Super Saiyan 2 Teen Gohan (Battle Damaged)] This is my first custom on Figure Realm so you can be as constructive as you need with your comments.
So, this is the Teen Gohan that you see in the final battle against Cell, where he and Gohan have the Kamehameha clash.
The base figure is an Irwin Toys Model Kit of Teen Gohan.
I applied Bandai Model Kit's Son Gohan Super Saiyan hair. Originally I got the model kit without any hair, and I had a Bandai Gohan Model Kit as well. So a hair add-on and I had the idea for the custom.
As for the clothing I damaged the clothes by using some wire cutters. Preferably scissors would have been better, but it was close enough for me.
As far as the blood and damage goes I used a red permanent marker under some carving work which I used the wire cutters for. (Again, theoretically it isn't the best tool but it was the closest thing to me.) I scratched the wire cutters against his right arm and coloured it with red.
I also applied some stickers from a MG Figurerise Son Goku Model Kit. (One with a b](userimages/customs/47500/47288-1.jpg) Super Saiyan 2 Teen Gohan (Battle Damaged) Dragonball Zby TheSonicHero5000This is my first custom on Figure Realm so you can be as constructive as you need with your comments.
So, this is the Teen Gohan that you see in the ...0 comments |
![[Xicor] well the figure that came was inacurate he didnt have those black spikes that he usually has so i just painted them on there](userimages/customs/46500/46025-1.jpg) Xicor | ![[Ssj4 Vegeta] i ordered a ssj5 vegeta when i got it i didnt like how it looked so i repainted it and took a different ssj4 vegeta head and repainted the hair a dark shiny black and i gave him a stand since i dint like the one he came with (not in picture)](userimages/customs/46500/46017-1.jpg) Ssj4 Vegeta |
![[Ssj6 Goku] alright i started out with a ssj4 goku i took the head of my ssj5 goku and put it on this one i gave the whole thing a yellow paint and i think it turned out to be pretty cool](userimages/customs/46500/46016-1.jpg) Ssj6 Goku | ![[Ssj4 Goku] I started out with a ssj5 goku the head looked terrible so i swithed it out with ssj4 gokus hair and painted the hair black and the fur red. I also painted the shoes and his little skirt thingy and gave a little drybrush affect on his silver wrist bands and armbands](userimages/customs/46000/45937-1.jpg) Ssj4 Goku |
![[Ssj4 Gohan] i had to sculp the hair on over the regular ssj hair but it got sticky so i had to resulpt it and the rest was a repaint i went with gokus outfit because it was the picture that i based it on also i handpainted the eyes witch is pretty good for me](userimages/customs/46000/45708-1.jpg) Ssj4 Gohan | ![[Dragonball Saiyan Marvel Gi Joe Scale] Hi there.
Here is my other Saiyan custom suitable to fit into gi joe, marvel universe, star wars scale.
Am quite happy how he turned out.
Body-MU Gladiator
Head- MU Punisher
Arms-Avengers Ultimate Thor
I made Saiyan armor for him, its removable, but I can't find pictures of it.](userimages/customs/46000/45660-1.jpg) Dragonball Saiyan Marvel Gi Joe Scale Dragonball Zby Bender1988DARTHi there.
Here is my other Saiyan custom suitable to fit into gi joe, marvel universe, star wars scale.
Am quite happy how he turned out.
Body-MU Glad...1 comments |
![[Gogeta] This one was made for a "big name". Just my third career Dragonball custom I believe. He began as a Vegeta head on top of a Gokou body. These figures are loaded with articulation :D! Sculpted the wristbands, boots and the entire torso musculature and vest. Then a bunch of hair on his forehead and a sash. Wrapped him up with the usual matte/semi-mettalic paint combo. Hope you like him guys! God bless.](userimages/customs/46000/45656-1.jpg) Gogeta | ![[Dragonball Z - Super Saiyan 2 Goku] Hello, I am Spartacus
Today I bring you: SSJ2 GOKU!!
As far as I know, There has been only one release of a "Super Saiyan 2 Goku" which was actually a head swap for a Super Battle Collection Ultimate Goku figure, which had came with Goku as normal, SSJ, SSJ2 and SSJ3. But out of the super battle collection, there has not been a release of a Super Saiyan 2 Goku.
Since I have a ton of Different Goku figures, I decide to change up some of them into Super Saiyan 2 versions. On this site perhaps a year ago, is where I got my first Introduction of 'Apoxie Sculpt'. I thought the numerous customs on here that used this putty like material were some of the best custom figures Ive ever seen. I ordered some in the mail right afterwards and I immediately got to work on figures and accessories.
One of the projects Ive done and still do constantly, is change some of the hair bangs on the DBZ figures.(namely Goku or Vegito). The number of bangs on the SSJ Goku figures aren't accurate. Se](userimages/customs/45500/45085-1.jpg) Dragonball Z - Super Saiyan 2 Goku Dragonball Zby SpartacusHello, I am Spartacus
Today I bring you: SSJ2 GOKU!!
As far as I know, There has been only one release of a "Super Saiyan 2 Goku" which was...2 comments |
![[Piccolo] Figure - MU Draxx](userimages/customs/45000/44967-1.jpg) Piccolo | ![[Vegito DBZ] Another commission for my man Fais. Starting on this guy I had no knowledge of DBZ other than the occasional flip through on TV. Now that I had a chance to work with this guy, it was a refreshing break from all the superhero stuff from the big 2. Also, these Figuarts figures are amazing figures. The articulation is out of this world!
So if I have this right, this is Vegito. Not Vegita, or Vigeto. Vegito. I'm pretty sure he's the bad@$$ of the bunch, and if he's not, I can't imagine who is. Got some great pics with the multiple interchangeable hands, and his really cool stand he comes with.
He was made from 2 different Figuarts figures that I combined. Modded the hair, and gave him a total redo on the paints.
See you in the future!
AC](userimages/customs/45000/44876-1.jpg) Vegito DBZ Dragonball Zby ACCustomFiguresAnother commission for my man Fais. Starting on this guy I had no knowledge of DBZ other than the occasional flip through on TV. Now that I had a chan...8 comments |
![[Goku] Head - Lion-O (Animated Series)
Torso - Marvel Universe Doctor Strange
Arms - MU Namor
Belt - MU Ronin
Lower Body - GI Joe Airtight](userimages/customs/45000/44703-1.jpg) Goku Dragonball Zby Iron WillHead - Lion-O (Animated Series)
Torso - Marvel Universe Doctor Strange
Arms - MU Namor
Belt - MU Ronin
Lower Body - GI Joe Airtight...4 comments | ![[Vegeta] Repainted hair and eyes to make him 'regular' Vegeta.](userimages/customs/44000/43916-1.jpg) Vegeta |
![[Piccolo] Repainted to match the anime.](userimages/customs/44000/43915-1.jpg) Piccolo | ![[Neo Namekian (S.H. Figuarts)] For this, I took Piccolo and gave him a new paint job to look like the Neo Namekian found in Dragon Ball Online. Thanks for looking!](userimages/customs/43000/42658-1.jpg) Neo Namekian (S.H. Figuarts) |
![[Dragon Ball Z Vegeta] Figure completely sculpted with clay. Since late 80's Vegeta is one of the toughest characters I've ever encountered in any animated series. That's why I decided to make a replica of him as my token of appreciation for 80's. Hope You like it. DBZ still alive:)](userimages/customs/43000/42648-1.jpg) Dragon Ball Z Vegeta Dragonball Zby GladkyFigure completely sculpted with clay. Since late 80's Vegeta is one of the toughest characters I've ever encountered in any animated series. That's wh...4 comments | ![[Dragonball Z Super Saiyan 4 Broly] This custom figure took a lot of sculpting , especially the head and hair area it tested the patience of my junior artist erwin in sculpting the hair . The lower leg was extended as to add height to the figure, as a result it weigh more than 2 kilograms! One of the most heaviest custom figure we have ever done. So we hope that you like it's on ebay! Happy bidding!](userimages/customs/41000/40958-1.jpg) Dragonball Z Super Saiyan 4 Broly Dragonball Zby toymancustomsThis custom figure took a lot of sculpting , especially the head and hair area it tested the patience of my junior artist erwin in sculpting the hair ...7 comments |
![[Metal Cooler - My 500th Custom] It has take its time, but here it is, my 500th custom! I (of course) wanted to do something special for such a landmark in a customizer's career, and it took a long time for me to decide what could be that something so special. The opportunity appeared as a chroming powder I bought months ago and arrived just in time. Now I was sure; it would be a chromey custom that will be ultra-durable and ultra-poseable!
After -again- looking at various characters, I decided for Metal Cooler (bad luck for Silver Sable), the movie villain of Dragon Ball Z and brother of Freezer. The base figure was Toyman DCUC (I think, there wasn't much left of him when I started) as it is slimer than a regular DCUC (which is my standard for normal superhero-villain). The hands were took from a Myth Cloth figure. One of the important parts of the custom (and surely, the most difficult) was making a tail. I didn't know what to use, as I didn't know of any that suited the purpose, and in the end I used a ball joint](userimages/customs/38500/38478-1.jpg) Metal Cooler - My 500th Custom Dragonball Zby argenta-2008It has take its time, but here it is, my 500th custom! I (of course) wanted to do something special for such a landmark in a customizer's career, and ...10 comments | ![[Gogeta] i had this china toy gogeta its hair was disgusting so i decided to change it is my first sculpt hence it looks bad i know.didnt have any tools so sculpted it by hands. any hints tricks tips are welcome](userimages/customs/38000/37828-1.jpg) Gogeta Dragonball Zby heroi had this china toy gogeta its hair was disgusting so i decided to change it is my first sculpt hence it looks bad i know.didnt have any tools so scu...2 comments |
![[Piccolo] Marvel Universe Piccolo concept
Head: DBZ Nail figure
Base: Thor](userimages/customs/38000/37825-1.jpg) Piccolo | ![[Dragonball Z - Krillin] Hello Realmers, today I'm uploading another DBZ custom my girlfriend made, Krillin! It was made from a dremeled down Naruto body to give him the right height (or lack thereof), with the shaved down head of a 6-inch scale wrestler. It fits into scale nicely with her previous customs of Goku and Piccolo. The symbols on the front and back of his gi were painstakingly painted on by hand with a toothpick and came out looking nice and clean. Hope everyone enjoys, thanks!](userimages/customs/38000/37712-1.jpg) Dragonball Z - Krillin Dragonball Zby Bad_Guy_RobotHello Realmers, today I'm uploading another DBZ custom my girlfriend made, Krillin! It was made from a dremeled down Naruto body to give him the right...2 comments |
![[Great Oozaru] So heres my Great Oozaru from dragon ball z. Its my first ever custom i've ever made..I don't have any special tools just used my hands and some kind of metal toothpick. I hope you guys like it! Its not completely done but i just have to do small details here and there. : )](userimages/customs/38000/37627-1.jpg) Great Oozaru Dragonball Zby dBzFreaKSo heres my Great Oozaru from dragon ball z. Its my first ever custom i've ever made..I don't have any special tools just used my hands and some kind ...7 comments | ![[Dragonball Z - Trunks] Hello Realmers, today I'm uploading a figure I made myself. I used an old James from Pokemon and made him into a Trunks from DBZ. I cut down the hair (using a razorblade sucks, sooo glad we got the dremel now) and cut a huge chunk out of the middle of the chest for Trunk's open jacket, then cut open his hand to fit in a "sword". Said sword is actually a nail file with the handle broken off and painted. I know its not accurate to his sword in the show but it was the best I could do at the time. This figure was a bit scrawny for Trunks, but I kinda like this depiction. Hope everyone enjoys, thanks!](userimages/customs/38000/37622-1.jpg) Dragonball Z - Trunks Dragonball Zby Bad_Guy_RobotHello Realmers, today I'm uploading a figure I made myself. I used an old James from Pokemon and made him into a Trunks from DBZ. I cut down the hair ...2 comments |
![[Dragonball Z - Goku] Hello Realmers, now it's time for the second figure my girlfriend made, Goku from Dragonball Z! It was made from some random WWE guy, with a head from a separate WWE guy who was ugly as sin lol. She shaved down the hair and cut down the huge chin, then clayed on the hair. I think it turned out well, especially seeing as this was one of our pre-demel figure, aka attack it with a razorblade. Enjoy!](userimages/customs/38000/37587-1.jpg) Dragonball Z - Goku Dragonball Zby Bad_Guy_RobotHello Realmers, now it's time for the second figure my girlfriend made, Goku from Dragonball Z! It was made from some random WWE guy, with a head from...0 comments | ![[Dragonball Z - Piccolo] Hello Realmers, today I'll be uploading the first figure my girlfriend made; Piccolo from Dragonball Z! This figure was made from an Ultimate Doc Ock. She cut off the hair and goggles, sanded down the face, and added twist-tie antennas. It looks really nice, especially being one of the ones that was made before we got a dremel (hacking away with a razorblade sucks!) Enjoy!](userimages/customs/38000/37585-1.jpg) Dragonball Z - Piccolo Dragonball Zby Bad_Guy_RobotHello Realmers, today I'll be uploading the first figure my girlfriend made; Piccolo from Dragonball Z! This figure was made from an Ultimate Doc Ock....2 comments |
![[Goku Ss4 UFS] I wanted to make my own Goku ss4 UFS instead of buying it.The one in markets Goku ss4 SUCKS!So I borrowed some putty from my friend and made him hair and tail paint job is done.WORKING on Gohan with purple gi,Trunks GT,Goku ss2 remake & Vegeta ss4!
(ENJOY)](userimages/customs/38000/37519-1.jpg) Goku Ss4 UFS Dragonball Zby gogetass4I wanted to make my own Goku ss4 UFS instead of buying it.The one in markets Goku ss4 SUCKS!So I borrowed some putty from my friend and made him hair ...2 comments | ![[Raditz Ohzaru Version] just another version of ohzaru , this time its raditz the first saiyan encountered by goku, the base figure is from monkeyman baf figure and the rest are all sculpted.](userimages/customs/37500/37398-1.jpg) Raditz Ohzaru Version Dragonball Zby toymancustomsjust another version of ohzaru , this time its raditz the first saiyan encountered by goku, the base figure is from monkeyman baf figure and the rest ...9 comments |
![[Bardock Ohzaru Version] this is another request from one of our patron, base figure is from a monkeyman baf figure and the rest are all sculpted . bardock is the father of goku the legendary saiyan .](userimages/customs/37500/37397-1.jpg) Bardock Ohzaru Version Dragonball Zby toymancustomsthis is another request from one of our patron, base figure is from a monkeyman baf figure and the rest are all sculpted . bardock is the father of go...5 comments | ![[Goku + Transformations] So I have done quite a few customs over the years, and have only uploaded a handful of them. but I have been looking at my old ones and realised that my skills have improved over this time. so I am going to start all my customs form scratch. And this is my New First Custom lol
Ok so down to the Figure.
I am a Huge fan of Dragon Ball Z, and I have made a few DBZ customs in the past. But I always thought they were lacking in some way. I thought that my last Goku was to Skinny.
So this time I choose a Bulkier Figure for the base, I really like how it looked in the end. Here you all go.
Heads - Goku Ultimate DBZ Figure heads.
Body - ML Iron Fist
Hands - ML Weapon X
Hips - ML Sinister Six Spider-man
Hate 45 degree Hips)
The Super Saiyan 2 head, I took a base Goku head removed all the hair and re-sculpted the whole thing. I think it came out pretty good.
Can't wait to do the Whole series. :)](userimages/customs/37500/37278-1.jpg) Goku + Transformations Dragonball Zby oSplinterSnakeoSo I have done quite a few customs over the years, and have only uploaded a handful of them. but I have been looking at my old ones and realised that ...1 comments |
|