![[Frank Frazetta's Death Dealer] After much work, and a LCBH Wraarl and DST Death Dealer statue to build upon, here's Frank Frazetta's Death Dealer. I tried to depict a blend of the Death Dealer II and III paintings. The "chainmail" skirt has floral wire in the seams, so that it can be posed in a variety of ways.](userimages/customs/42000/41810-1.jpg) Frank Frazetta's Death Dealer Dioramaby ayelidAfter much work, and a LCBH Wraarl and DST Death Dealer statue to build upon, here's Frank Frazetta's Death Dealer. I tried to depict a blend of the ...14 comments | ![[Discworld Long Man Diorama] I made this discworld diorama as a gift for my aunt who is a big fan of the three witches ( as am I ) The Long man is a buryal mound well 3 mounds make up the long man hence the name.
I made the mounds and land from clay the entrence to the cave was made from foam board the trees are made from wire and medical tape with a coat of pva and polyfiller mix I added bushes grass flock flowers and lychen. I used clear rods to mount the miniatures ( all hand painted using acrylics ) and there you have it The three witches of Lancre flying over the long man](userimages/customs/39500/39365-1.jpg) Discworld Long Man Diorama Dioramaby custombaseI made this discworld diorama as a gift for my aunt who is a big fan of the three witches ( as am I ) The Long man is a buryal mound well 3 mounds mak...2 comments |
![[Prototype Infected Water Tower] I wanted to have someting to display my Alex Mercer figure so I came up with this Infected water tower.
First I made the tower from a twigglets tub and thin wire and made the roof from card, glued it to the tub and then painted.
Next I glued lengths of orange thread onto the tower in a veined network and then covered them in hot glue. I made a base for the tower from cardboard and garden mesh and attached to the towed. I hot glued the base of the tower then painted the cooled glue with red glass paint and while the glass paint was wet I covered it in orange embossing powder shook off and left to dry. I made a roof top for the tower and figure to stand on from foam board and fixed the tower to the roof and TA-DA there ya have it. Hope you guys like what ya see.](userimages/customs/39500/39159-1.jpg) Prototype Infected Water Tower Dioramaby custombaseI wanted to have someting to display my Alex Mercer figure so I came up with this Infected water tower.
First I made the tower from a twigglets tub an...2 comments | ![[Discworld: Granny Weatherwax's Cottage] I just got my hands on some micro arts Discworld miniatures and wanted more to desplay them on than the plastic base that came with them, This is the first time I have worked with miniatures, so here we have Granny Weatherwax, Nanny Ogg, Magrat Garlic and Giamo Cassanunda "the worlds smallest lover" outside of Grannys Cottage in Lancre. I made the walls of the cottage and the chimney from styrafoam pizza base and drew all of the stone work on by hand with a ballpoint pen, painted and fixed the walls together. The roof thatch was sculpted useing air dry fimo. Next I sculpted the door, window frames the privy, bench and all of the wood work from fimo and baked it hard, then the wood work was painted and the windows fitted with clear plastic that was dirtyed up with gray and brown washes and all of the wood work was fitted to the cottage. The ground was cut from a cerial box and sculpted over and the house was fitted to the ground, then the ground was painted dark green. The tre](userimages/customs/39500/39147-1.jpg) Discworld: Granny Weatherwax's Cottage Dioramaby custombaseI just got my hands on some micro arts Discworld miniatures and wanted more to desplay them on than the plastic base that came with them, This is the ...7 comments |
![[My Father's Shed] Foam board, McFarlane Monsters, bunch of fodder, wood grain pattern cardboard.](userimages/customs/39500/39004-1.jpg) My Father's Shed | ![[Battlefield Bad Company 2 Assault Soldier.] Hi everybody!here's my new custom!
I found this desert ranger figure on a flea market.
I removed the helmet and the goggles then glued the latter on the face.Used polymer clay to create the hood, then painted it ,boots, gloves and knee pads.
I added the shotgun that comes from a resident evil figure.
For the diorama, I used a base found on the same flea market.Base on which I added rocks, grass & the barrier.
Enjoy!](userimages/customs/38500/38100-1.jpg) Battlefield Bad Company 2 Assault Soldier. Dioramaby chienmaladeHi everybody!here's my new custom!
I found this desert ranger figure on a flea market.
I removed the helmet and the goggles then glued the latter on t...2 comments |
![[City Escape] City Escape
A city, based off of San-Francisco located in Central City, Station Square.
This small diorama represents a small chunk of the Sonic Adventure 2 Level, City Escape.
Created using Cardboard and I used Foam Core for the more sturdy parts. I even created the floating metal drum for sonic to stand on. I also painted on several posters seen throughout the city, some from the dreamcast version and some from the gamecube one. It took me about 13 hours to paint and I finally found a way to incorporate my custom Sonic with Soap shoes into a custom since I didn't feel like posting it just do to it's simplicity, so I hope you enjoy them both! So that's my entry, A custom Diorama with even a customized figure to go with it!](userimages/customs/38000/37737-1.jpg) City Escape Dioramaby sonicustomsCity Escape
A city, based off of San-Francisco located in Central City, Station Square.
This small diorama represents a small chunk of the Sonic Adven...4 comments | ![[Lava Diorama] Hi guys this is just made from fome board with sand and glue,I used Bobtheodd's recipe for lava and the gargoyle is cast in plaster. I painted over the lava with a clear uv reactive paint that glows a redish orange hope ya like it guys](userimages/customs/37500/37303-1.jpg) Lava Diorama Dioramaby custombaseHi guys this is just made from fome board with sand and glue,I used Bobtheodd's recipe for lava and the gargoyle is cast in plaster. I painted over th...8 comments |
![[Blood Bath!] Since my Spinal was popular I had to make a display for him so i bought some project bricks from hobby lobby wich are awesome to use by the way! Glued bricks together primed them painted over with a few different color washes. then finally the BLOOD SPLATTER! It even has a peg fo him o stand on.](userimages/customs/37500/37231-1.jpg) Blood Bath! Dioramaby lonewolf77Since my Spinal was popular I had to make a display for him so i bought some project bricks from hobby lobby wich are awesome to use by the way! Glued...2 comments | ![[The Walking Dead "Cafeteria Scene" Diora] Hey guyz!
Here's my new diorama!
Everything is made from scratch.
Thank you for your comments!
Enjoy!](userimages/customs/37500/37154-1.jpg) The Walking Dead "Cafeteria Scene" Diora |
![[Shadowland Throne] Trono Daredevil Shadowland, hecho con espuma, cola, pintura acrilica y tela
Shadowland Daredevil throne, made of foam, glue, acrylic paint and cotton](userimages/customs/37500/37084-1.jpg) Shadowland Throne Dioramaby SatanazTrono Daredevil Shadowland, hecho con espuma, cola, pintura acrilica y tela
Shadowland Daredevil throne, made of foam, glue, acrylic paint and cotton...8 comments | ![[Ruined Wall Display] Same as the others, foam, glue paint and a bit or floral wire for the rebar.
Photos: Front, back and with figures(Bullseye got whipped by Ghost Rider) for scale(.](userimages/customs/37000/36721-1.jpg) Ruined Wall Display Dioramaby bobtheoddSame as the others, foam, glue paint and a bit or floral wire for the rebar.
Photos: Front, back and with figures(Bullseye got whipped by Ghost Rider)...10 comments |
![[Volcanic Wasteland Display 2] Foam, glue, cat litter/sand, plaster-goop(lava)and paint.
People asked for a lava tutorial, its up on my youtube channel under the name "lunkermouth" (no links allowed)](userimages/customs/36500/36471-1.jpg) Volcanic Wasteland Display 2 Dioramaby bobtheoddFoam, glue, cat litter/sand, plaster-goop(lava)and paint.
People asked for a lava tutorial, its up on my youtube channel under the name "lunkermo...4 comments | ![[Volcanic Wasteland Display] Another foam made display, same as the others.
Same materials as the others.
Lava made of plaster, caulk, glue and paint.](userimages/customs/36500/36275-1.jpg) Volcanic Wasteland Display Dioramaby bobtheoddAnother foam made display, same as the others.
Same materials as the others.
Lava made of plaster, caulk, glue and paint....6 comments |
![[Corner Rocky Display] Another rocky display.
Foam, glue, cat litter, paint and floral moss.](userimages/customs/36500/36053-1.jpg) Corner Rocky Display | ![[Thundercats Cliff Display] All foam except the glue holding it together, the paint and some cat-litter for the texture/pebbles.
27inches long, 12 inches deep and tall.](userimages/customs/36000/35893-1.jpg) Thundercats Cliff Display Dioramaby bobtheoddAll foam except the glue holding it together, the paint and some cat-litter for the texture/pebbles.
27inches long, 12 inches deep and tall....7 comments |
![[Weapon X Laboratory Diorama] Been working on this guy for a while now. I am calling it my Weapon X lab for a lack of anything better to call it. I intend to use it pictures and I think it will pass for a lot of different settings. I do need to start by giving credit to DBOCustoms for the idea that sparked my interest in making this puppy. His Weapon X tank sent me running over to Hobby Lobby to find the glass container.
My work started with the tank. I wanted to try to create a "submerged" effect that would permit me to insert different figures. It took some serious digging to find a clear tube that would fit inside glass container. I went from WAAAAAAY too expensive glass and plexiglass options. I landed with a super cheap option. A 99 cent t-shirt mailer. I chopped it down to the right length and placed it inside the container. I then used clear resin to fill the space between t-shirt tube and the container. The end effect is hollowed out compartment that anything you place in it looks lik](userimages/customs/34000/33969-1.jpg) Weapon X Laboratory Diorama Dioramaby CaptainRonBeen working on this guy for a while now. I am calling it my Weapon X lab for a lack of anything better to call it. I intend to use it pictures and ...11 comments | ![[Iron Man Flight Base] Well here we go again not my best work here but i'm happy at the results.
So the base is inspired from Danilko but not as same as his work.So what i did was get a piece of cardboard i shape it into square then i get the brown thing that holds the tissue paper shortened it.Next i get pieces of tissue paper then glued it into the cardboard so it has that smoke effect.I hot glued the cardboard that holds the tissue so it looks like Tony's blasting up then i painted it with orange on top then red on the bottom so it looks more of a flame.The blast from Tony's hands are the same as the one from the tutorial thank you very much you helped me BTW sorry i forgot your name.That's just about it thanks comments are welcome.](userimages/customs/34000/33895-1.jpg) Iron Man Flight Base Dioramaby imakid11Well here we go again not my best work here but i'm happy at the results.
So the base is inspired from Danilko but not as same as his work.So wh...0 comments |
![[Ruined Arch Diorama] Hey guys I made this Ruin diorama to go with my MOTU Movie concept figures.
The whole thing was carved from foam board, the floor texture is a mix of sand and pva glue.
This was painted with acrylic paints I then added a little flocking, lychen and some long plastic grass. The metal ring was a rubber washer glued to a spare leg peg.
hope you guys like it.](userimages/customs/34000/33579-1.jpg) Ruined Arch Diorama Dioramaby custombaseHey guys I made this Ruin diorama to go with my MOTU Movie concept figures.
The whole thing was carved from foam board, the floor texture is a mix of ...6 comments | ![[Megan Fox] I´m just bored and repaint my Lilah figure, put out the dress, sand the stockings, apply some epoxy for the new corset and skirt, acrylic paint for the wet look leggings and that´s all, just want a Megan Fox to rescue by my other present day neca figures and not a western one :P](userimages/customs/34000/33561-1.jpg) Megan Fox Dioramaby PuercucoI´m just bored and repaint my Lilah figure, put out the dress, sand the stockings, apply some epoxy for the new corset and skirt, acrylic paint ...4 comments |
![[Graveyard Diorama] Ok for this one i wanted it to go with archangel but he became my archenemy! i gave him so many paints but it just didnt look right to me. anyways this is scratch built with one little piece a tombstone i guess given to me by galactape in a trade. length is 7.5 inches, width is 5.5 inches and the height is 5 inches. any feedback is greatly appreciated thanks guys!](userimages/customs/33500/33254-1.jpg) Graveyard Diorama Dioramaby mmdiegoOk for this one i wanted it to go with archangel but he became my archenemy! i gave him so many paints but it just didnt look right to me. anyways thi...8 comments | ![[Zombie Outbreak Diorama] Here's my new "zombie Outbreak" diorama.
wanted a walking dead dio but found out it hadn't enough details.
Everything is made from scratch.Used sealing plaster for the floor and the brick wall.The zombie is a Resident evil crimson head I've repainted.Then i cut the claws.](userimages/customs/33500/33202-1.jpg) Zombie Outbreak Diorama Dioramaby chienmaladeHere's my new "zombie Outbreak" diorama.
wanted a walking dead dio but found out it hadn't enough details.
Everything is made from scratch....10 comments |
![[Raving Rabbids Pizza-Cook "Boite a Pizza&quo] Worked during 4 years for the French pizza chain "la boite a pizza" and thought it would be cool to immortalize
this part of my life into a dio.
So, i Had a quick repaint of the figure, stuck it on a pizza magnet,then i designed pizza boxes on my computer and assembled them.
So here it comes, simple but funny.
greetings from France!](userimages/customs/32500/32431-1.jpg) Raving Rabbids Pizza-Cook "Boite a Pizza&quo Dioramaby chienmaladeWorked during 4 years for the French pizza chain "la boite a pizza" and thought it would be cool to immortalize
this part of my life into a ...0 comments | ![[Leatherface Kitchen (the Texas Chainsaw Massacre)] the Texas chainsaw massacre is one of my favorite films, so i wanted a diorama for my leatherface figure.
at first i wanted to make just a kitchen, but then i decided to make it similar to the one in the movie, i made everything in it except the sink that came from an old wrestling figure who also grant his head and arm for the diorama, the "children" hand was from a 3 inch figure and the pails are made of epoxy putty, the intestine was also made with epoxy putty, the chainsaw and hammer came with leatherface.
the blood and the inside wall (the blue one) where painted with acrylic paints, the interiors and the outside wall where painted with a paint for wood, white color. i masked the walls with masking tape to get the look of wall paper (don't know if that's well written) and made a window with real glass from a welding mask i was using at the time.
then i added judea bitumen on EVERYTHING to get the aged effect.this is my first finished work, even though i had other stuff](userimages/customs/32000/31773-1.jpg) Leatherface Kitchen (the Texas Chainsaw Massacre) Dioramaby Mr.?the Texas chainsaw massacre is one of my favorite films, so i wanted a diorama for my leatherface figure.
at first i wanted to make just a kitchen, bu...14 comments |
![[Masters of Evil Hideout] I needed a place for my evilfolks to chill so I carved this into some styrodur and painted it with acrylic paint.
Hope you guys like it. D-Man](userimages/customs/29000/28602-1.jpg) Masters of Evil Hideout Dioramaby D-ManI needed a place for my evilfolks to chill so I carved this into some styrodur and painted it with acrylic paint.
Hope you guys like it. D-Man...3 comments | ![[Motu Figure Base] I needed a display my new MotU figs so I took some clay and started sculpting.
Please let me know what you think about them.](userimages/customs/29000/28585-1.jpg) Motu Figure Base Dioramaby D-ManI needed a display my new MotU figs so I took some clay and started sculpting.
Please let me know what you think about them....1 comments |
![[Motu Masters Hideout] I was sick of looking at my beautiful Masters Figures standing on an ugly old desk so I wanted do build a healthy environment for he-man and his friends. Greetings from Germany](userimages/customs/29000/28559-1.jpg) Motu Masters Hideout Dioramaby D-ManI was sick of looking at my beautiful Masters Figures standing on an ugly old desk so I wanted do build a healthy environment for he-man and his frien...3 comments | ![[Blast Base] I just found some pics of one of the very first bases I ever made so I thought I would post them.
This base is very simple I carved all the rock from foam board and the blast was toy packaging coloured red with a perminent marker pen.
Hope ya like it guys.](userimages/customs/25000/24668-1.jpg) Blast Base Dioramaby custombaseI just found some pics of one of the very first bases I ever made so I thought I would post them.
This base is very simple I carved all the rock from ...5 comments |
![[FF Doom Castel Diorama] Here is another diorama I made some time ago, had I made this more reacentley I would have made the walls much better but hey ho ya lern as ya go. This diorama was created mostley with foam board, the walls, floor, bricks, flames and throne were carved from foam board the wall mount was the bottom of a ML flying stand and some fodder bits. Sue's force fieald was the packaging from a foot ball and Dooms lightning is fuse wire. let me know what you think guys.](userimages/customs/24500/24487-1.jpg) FF Doom Castel Diorama Dioramaby custombaseHere is another diorama I made some time ago, had I made this more reacentley I would have made the walls much better but hey ho ya lern as ya go. Thi...7 comments | ![[Flying Stand] This was another real simple base to make.
I carved the rocks from foam board and then glued a ml flying stand to it, then I made clouds around the base with toilet paper and pva glue.
What do you think?](userimages/customs/24500/24486-1.jpg) Flying Stand Dioramaby custombaseThis was another real simple base to make.
I carved the rocks from foam board and then glued a ml flying stand to it, then I made clouds around the ba...1 comments |
|