![[Female Jedi (Clone Wars)] Didn't like the original look so I completely re-painted her, and added a little skirt, plus a belt with the requisite Jedi pouches and a couple loops for her lightsabers. Overall it's not bad, but I used Americana paints, so I plan to go back over it with Citadel ones, bring everything out and make her all nice. Plus I have to seriously fix her face and skin.](userimages/customs/50000/49978-1.jpg) Female Jedi (Clone Wars) Star Wars Clone Warsby Sarah37Didn't like the original look so I completely re-painted her, and added a little skirt, plus a belt with the requisite Jedi pouches and a couple loops...3 comments | ![[Republic Commando: Darman] I'm a BIG fan of author Karen Travis and all her work, especially in the Republic Commando series. I was inspired by them to create the Republic Commando: Darman. I created him from a Scorch figure and made him in white armor as opposed to his Night Ops armor. In his hand I put a pic of his Jedi wife, Etain, which I got from Wookiepedia.
In the series when they were not together Darman always seemed to think of his wife and that's kind of the message I wanted to convey in this build. Him suited up, getting ready to head out on a mission, and yet he takes the time to stop and pull out a wrinkled pic of his wife to look at. Enjoy!](userimages/customs/49500/49205-1.jpg) Republic Commando: Darman |
![[Clone Diorama "Sith Assault"] While on a routine scouting mission the commander and his men find themselves under attack by a sith assassin. Outmatched, the commander and his men make a brave stand against the enemy.
After looking at fellow realmer Hemble's dioramas I felt inspired to make one of my own. Enjoy! And please comment!](userimages/customs/48500/48038-1.jpg) Clone Diorama "Sith Assault" | ![[Phase I Clone Armor Repaint] Just a fun and quick repaint with some dry brushing for good measure. I like the look and articulation of the clone wars troopers. They were just a little too "clean" for my taste so I dirtied this one up a bit and while I was at it I added a little color to change his rank. Enjoy!!](userimages/customs/48000/47790-1.jpg) Phase I Clone Armor Repaint |
![[Asajj Ventress Dark Jedi 2.0 Sith 1.12th Scale] A Custom Marvel Legends DCU Style 6 to 6.5 inch 1:12th scale Fully poseable DARK JEDI ASAJJ VENTRESS SITH LORD ACTION FIGURE. Custom sculpting, dremeling,and rearranging of multiple parts from two different base figures. Primed and painted when needed, colorwashed and sealed for different shades.
Over 40 points of articulation. Ball jointed shoulders, head rotates, swivel arms moveable wrists, double jointed bendable elbows and knees and hip joints and other swivel parts etc. to allow for multiple positions. Her two curved lightsabers can separate from the hilt.
SITH LORD ASAJJ VENTRESS the DARK JEDI SITH ASSASSIN version 2.0
Outfit has been changed as well as the head
Next to Ahsoka is my favorite Star Wars CLONE WARS female character.
BACKGROUND:
Ventress is a DARK JEDI, and one of COUNT DOOKU's FORCE-attuned apprentices and assassins. She is a powerful warrior with exceptional combat abilities, and desires most of all to join the SITH order and destroy the JEDI. She wields dua](userimages/customs/46000/46000-1.jpg) Asajj Ventress Dark Jedi 2.0 Sith 1.12th Scale | ![[Anakin Skywalker Animated 1:12th Scale] Custom Marvel Legends Style Star Wars Clone Wars Animated Series Anakin Skywalker Jedi Knight Fully Poseable Action Figure. Approximately 6.5 inches tall.
Took A static nonmoveable statue and added full articulation. Now instead of one fixed position he can be posed just like any other Marvel Legends figure. The neck fully rotates 360 degrees and the head can be positioned in all directions as well with the ball joint. The shoulders are now ball jointed. Arms swivel and elbows bend and wrist rotate. Waist turns and Hips move in all directions. Knees bend as well. Added custom skirt for moveability and increased range of motion and painted when necessary.
Added custom R2 and Ahsoka Tano in the photo](userimages/customs/46000/45825-1.jpg) Anakin Skywalker Animated 1:12th Scale |
![[General Kenobi Clone Wars 1:12th Scale] General Obi Wan Kenobi from the Star Wars Clone Wars Animated Series in a 6 inch 1:12th Scale.
Took a Kenobi statue and cut every limb. Then hollowed out every part of it with a dremel. A nightmare to do accurately without damaging the exterior requiring a lot of precision. Dremeled each part so that every joint I attached would be able to move and pivot within it. Used a marvel legends figure to create all of the joints. The result is what once was a static statue that could not move at all and only held one position now has more than 36 points of articulation. The boot gauntlets pivot around the calve area. The knees are both double jointed, the thighs swivel, the hip moves in every direction, the waist swivels, the belly can go up and down, the wrists pivot, the elbows are double jointed, the shoulders are ball jointed and move in every direction, and the head pivots.
I love the cartoon series and just had to have a General Kenobi in my collection in a 6 inch Scale.](userimages/customs/46000/45692-1.jpg) General Kenobi Clone Wars 1:12th Scale | ![[General Obi-Wan Kenobi] This is my second custom.
Figure base: Stormtrooper Superior Torso; Head, Arms, Inferior Torso and Legs (Various figures)
Modeled head, arms, suit and boots with epoxy
Painted with acrylic paints and enamel](userimages/customs/46000/45521-1.jpg) General Obi-Wan Kenobi Star Wars Clone Warsby AndroideThis is my second custom.
Figure base: Stormtrooper Superior Torso; Head, Arms, Inferior Torso and Legs (Various figures)
Modeled head, arms, suit and...1 comments |
![[Captain Fox(Removable Helmate)] I wanted a Captain Fox with a removable Helmate so I did it. what do you think?](userimages/customs/45000/44628-1.jpg) Captain Fox(Removable Helmate) | ![[AHSOKA TANO 6 INCH JEDI PADAWAN 1:12th Scale CLONE] Description: A Custom Marvel Legends DCU Style 6 inch 1:12th scale Fully poseable CLONE WARS AHSOKA TANO JEDI PADAWAN ACTION FIGURE. Custom sculpting, dremeling,and rearranging of multiple parts. Primed and painted when needed. Color washed and sealed. Backpack is removable with baby HUTT.
Over 40 points of articulation. Knees and arms both double joints bend. Waist pivots spots, and boots rotate and legs move forward and back and side to side and thighs and arms swivel, etc. Wrists move and hands curl, shoulders are ball jointed, head can move in every position and more. Perfect for multiple positions.
She is in perfect scale with our other STAR WARS MARVEL LEGENDS LINE Up.
Please click on our ID to see others.
This is our Deluxe Edition
Easily one of my favorite Star Wars CLONE WARS characters.
AHSOKA TANO:
Ahsoka Tano, nicknamed Snips by her master, was a Togruta Jedi Padawan during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Sy](userimages/customs/44500/44016-1.jpg) AHSOKA TANO 6 INCH JEDI PADAWAN 1:12th Scale CLONE |
![[Darrth Maul Spider Cyborg] I used the upper half of the shirtless Darth Maul from a Sith legacy pack. The lower half is from B'omarr monk. The rest is paint, sculpt, and fodder. Thanks for looking.](userimages/customs/44000/43639-1.jpg) Darrth Maul Spider Cyborg | ![[Custom 6" Savage Opress] Savage Opress was made using a DCUC base and ML Bullseye Head. Combined with PLastic rods and leather, this figure was great fun to make. Figure is also fully articulated and comes with a dual light sabre.](userimages/customs/43500/43212-1.jpg) Custom 6" Savage Opress |
![[Snow Bunny Padme Amidala Bratz] For this one I restyled the hair and repainted the body. the belt is made from vinyl, and the cape is handsewn in baby blue and white material with baby blue trim and some blue pom poms added. The cape is removable and for the the boots the tops are are sewn with added blue trim. This is actually one I wanted make for a while since I actually made this costume for myself I know the detail of it pretty well. :-)](userimages/customs/42500/42163-1.jpg) Snow Bunny Padme Amidala Bratz Star Wars Clone Warsby RogueFor this one I restyled the hair and repainted the body. the belt is made from vinyl, and the cape is handsewn in baby blue and white material with ba...8 comments | ![[Clone Flight Crew] an A-wing body, apoxie vest,clone trooper head, and some helmet](userimages/customs/41500/41144-1.jpg) Clone Flight Crew |
![[Prototype Assasin Droid] Just look at the frikken gun!!!!!!!](userimages/customs/41500/41025-1.jpg) Prototype Assasin Droid | ![[General Obi-Wan Kenobi] Well, I've got some pieces of a deluxe Obi Wan which you can put the general suit (helmet, arms, chest and stuff) and decided put it on a bootleg Obi-Wan figure. I didn't use much paint on it, just yo put some parte at the same level of color and texture. And of course, the helmet is removable, as you can see in pics. Also you can see how he was before my work.](userimages/customs/41000/40747-1.jpg) General Obi-Wan Kenobi |
![[Aayla Secura Mach 2] This is my second attempt at this figure. First I sandpapered and repainted her body then modified her top by adding an extra sleeve and repainting it. The next thing I did was paint the vinyl pieces then cut and glued it as her belt. The boots I had and repainted along with her legs in several browns. The last part was her headdress which is made out of black vinyl pieces then sewed and glued onto her head. after that I painted over it again, and then sewed the straps on her lekki and painted some more details then I was done. Not an easy figure to work on but love the end result.](userimages/customs/41000/40539-1.jpg) Aayla Secura Mach 2 Star Wars Clone Warsby RogueThis is my second attempt at this figure. First I sandpapered and repainted her body then modified her top by adding an extra sleeve and repainting it...8 comments | ![[Darth Maul "Arachnid" Star Wars Clone W] Hello every one, this is my first star wars custom, Dart maul from the clone wars episode "brothers". he was quite fun making and a little tricky ;) he's in scale with regular star wars figures from hasbro. his upper body was a savage opress toy that i attacked with my rotary tool to slim him down and his legs were a spider droid???? that i went a little nuts with wire on. all the little "plates" on his body were placed individually and made ot of sheet styrene. add some fancy paint work and some cloth and viola! one slightly crazed darth maul!](userimages/customs/40500/40298-1.jpg) Darth Maul "Arachnid" Star Wars Clone W |
![[Clone Wars Darth Maul] From the latest episode of Clone Wars, Darth Maul. His spider-like appearance was pretty awesome to me so I went to work right away.
I used a Scarlet spider for the body, with an Archangel head, and tooth picks for horns. The robo body is made from a ton of scraps. Mostly Xevoz limbs and gi-joe accessories.
The paint job was my favorite part. Hand painting those tattoos was the hardest part. The robot parts were drybrushed silver, and then inked brown.](userimages/customs/38000/37506-1.jpg) Clone Wars Darth Maul Star Wars Clone Warsby rascalFrom the latest episode of Clone Wars, Darth Maul. His spider-like appearance was pretty awesome to me so I went to work right away.
I used a Scarle...6 comments | ![[Mara Jade (Animated Style)] Mara Jade is my favorite expanded universe character, so I felt the need to visualize what she would look like in the ever popular clone wars style. The character's clothing and accessories have been stylized to fit the art of the cartoon, has a light saber and stand.](userimages/customs/37500/37469-1.jpg) Mara Jade (Animated Style) |
![[Cad Bane Season 4] Hi! After watching last weeks episonde of the clone wars I decided I would make a custom cad bane from this weeks episode, it is pretty much just a head swap, except the neck was way too long so I had to repeg it. Thanks for looking!](userimages/customs/36500/36298-1.jpg) Cad Bane Season 4 | ![[Clone Scuba Trooper] HEY guys should i make a clone commander Monnk? This scuba trooper was in clone commander Monnk's squad at the battle of moncala.](userimages/customs/36000/35565-1.jpg) Clone Scuba Trooper |
![[Robonino's Swoop Bike] Just a little bike](userimages/customs/35000/34843-1.jpg) Robonino's Swoop Bike | ![[IG-86 Speeder] It's just a V-Wing cocpit with tri droid wings. And my presonal touch of awesome!](userimages/customs/35000/34842-1.jpg) IG-86 Speeder |
![[Anakin Skywalker in Zero-G Mech] It's just iorn man plus anakin's head. I also took some plastic and tape and made it into a helmet.](userimages/customs/35000/34741-1.jpg) Anakin Skywalker in Zero-G Mech | ![[Stego-Clone] I have a feeling the Emperor is the kind of boss that would let you dress up for Halloween at work but with the douche exception that you would still have to be in uniform. Here is my Clone Trooper dressed as a Stegasaurus using that "logic"
He is a Medicom Clone Trooper with bits of a Dollar Tree dinosaur and sculpt. Hope you enjoy!](userimages/customs/33500/33107-1.jpg) Stego-Clone |
![[Aayla Secura Bratz] I did as I usually do in creating this figure which is to sand and repaint the body. Fortunately, I didn't have to change the eye color just her entire upper body, which I painted blue/green, once she was sealed I repainted and adjusted her top. The pants are painted on and then the belt was made from different pieces of vinyl glued onto the pants, with ribbon strings on the sides. Instead of just painted boots on I sewed some pieces of vinyl and added to the top of the shoe with a couple of flaps I noticed her boots had. For her head-tails, I cut her hair short made two ponytails which are wrapped in wire. After that I sewed a vinyl head band then sewed two separate tails which i sewed onto the head band. after that I painted the tails and head band and added some panels to the sides of her head. the ears were made with puffy paint then painted to match her skin. After that I added detail of the lack ribbons on her tails attached to the head band then added painted ribbon around the t](userimages/customs/33000/32649-1.jpg) Aayla Secura Bratz Star Wars Clone Warsby RogueI did as I usually do in creating this figure which is to sand and repaint the body. Fortunately, I didn't have to change the eye color just her entir...3 comments | ![[Custom Zombie Clone Trooper by Andro6657] Just modified Clone Trooper (I think, not sure) that I got at a garage sale. Used the "hot" knife trick to get the damaged look and just repaint after that. Comments plz.](userimages/customs/32500/32386-1.jpg) Custom Zombie Clone Trooper by Andro6657 |
![[Durge 2.0] took my highly articulated durge featured on here and decided to re make him. I added ankle joints for more pose-ability, and used the frost giants chest and stomach. bashed them together and then made a head for it so I could have all the faces of durge :) repainted it and were done. hope you like it.
enjoy
FT](userimages/customs/32500/32103-1.jpg) Durge 2.0 | ![[ARC Trooper] Made quite a while ago for a fellow TFN member. Softgoods kama and pauldron, slinged ARC rifle.](userimages/customs/32000/31837-1.jpg) ARC Trooper |
|