![[Cyclocon Fembot Vehicon] Transformers Prime has all sorts of awesome re-designs for characters and new designs for ones we've never seen before. Arcee got a sweet new motorcycle design and has been beating up the clunky Vehicons since the first episode! Well that changes now with the addition of my custom Motorcycle Vehicon, or Cyclocon I guess you could call them. Cyclocon 2.0 was created using the RID Arcee mold and utilizes a Sniper rifle that can be held or mounted on the backpack wheel turret. She has arm blades courtesy of a movie satellite Soundwave and her 'heelies' flip out so she can make a quick escape in robot mode.](userimages/customs/49500/49225-1.jpg) Cyclocon Fembot Vehicon Transformers Primeby Jin SaotomeTransformers Prime has all sorts of awesome re-designs for characters and new designs for ones we've never seen before. Arcee got a sweet new motorcyc...6 comments | ![[Ser-Ket] The Predacon (Or rather called The Forged) Ser-Ket hails from the Transformers comics and is a downright lethal character! Lots of fan requests poured in for me to make her so here's my crack at Ser-Ket. She of course is made from a Transformers Beast Hunters Ripclaw and features a double ball jointed head as well as a new closed-mouth look which I very much prefer. You'll need to unscrew the head and do some cutting/fitting to get her mouth closed but it's pretty straightforward. Her elbows are also modded with ball-joints which greatly improve her posing. She was given a dragon-ish paint job using different metallic colors, weathered greens, mustard yellow, and gold. A semigloss sealer coat was used and now Ser-Ket is ready to rain acidic venom down on her enemies from above!](userimages/customs/49500/49224-1.jpg) Ser-Ket Transformers Primeby Jin SaotomeThe Predacon (Or rather called The Forged) Ser-Ket hails from the Transformers comics and is a downright lethal character! Lots of fan requests poured...7 comments |
![[Slipstream] This custom transformers prime slipstream was a very request custom and people asked me to make her from the same beast hunters starscream mold i made the updated airachnid from. More of the spikes/fins were removed from the mold and sanded down to form a more normal seeker body. Slipstream's head is a new sculpt that features a mix of arcee's and starscream's featured including some new ears. She was painted with testors and formula p3 teal/grey/purples and sealed with a semigloss varnish to prevent wear. Her missiles came from an avatar tread-bike of some sort and were modded with 5mm diameter hard plastic silly straws to fit her forearms.](userimages/customs/49000/48763-1.jpg) Slipstream Transformers Primeby Jin SaotomeThis custom transformers prime slipstream was a very request custom and people asked me to make her from the same beast hunters starscream mold i made...7 comments | ![[Predaking] Repainted the lower legs to match his body color. I also added some energon dripping effect on his dragon mode.](userimages/customs/49000/48503-1.jpg) Predaking |
![[Black Airachnid] It turns out the actual Transformers Prime Arachnid toy was pretty terrible and nothing I tried could save her from being a pile of jointed polygons. So I did what any customizer would do in this situation, kept her head and tossed the body. Airachid would soon be reborn as 'Black Airachnid'. To do this I used the Beast Hunters Starscream mold and trimmed down most of the body spikes, wing hooks, and hollowed out more of the inner chest. Airachnid's head was modded to fit and suddenly the figure started to look more and more like her. She's a jet in this format and I still needed to incorporate the spider aspect. Using Cliffjumper's hammer body and some Star Wars Spider assassin droid legs I created a drone that could be plugged onto her back to show the legs in robot mode and act as a separate robot scout when she was in jet mode. Now Black Airachnid is perfectly suited to pose along with the other bots on my shelf!](userimages/customs/48500/48383-1.jpg) Black Airachnid Transformers Primeby Jin SaotomeIt turns out the actual Transformers Prime Arachnid toy was pretty terrible and nothing I tried could save her from being a pile of jointed polygons. ...5 comments | ![[Ironhide (Prime)] I started this repaint before i saw the transformers prime Kup figure that is obviously ironhide. I don't like how much black is on the truck, but that is the design. it was hard to blend the right red for the hood.](userimages/customs/48000/47964-1.jpg) Ironhide (Prime) |
![[Galvatron] Head: TF movie Megatron
Torso/Arms: TFA Megatron (modified)
Legs: TFP Ultea Magnus
Ever since I bought TF Prime Megatron, I always wanted a Galvatron for my Transformers Prime line-up. Thus, after getting rid of the knock-off head and using the movie version Megatron,...Galvatron was born.](userimages/customs/48000/47760-1.jpg) Galvatron | ![[Motorcycle Vehicon] Transformers Prime has all sorts of awesome re-designs for characters and new designs for ones we've never seen before. Arcee got a sweet new motorcycle design and has been beating up the clunky Vehicons since the first episode! Well that changes now with the addition of my custom Motorcycle Vehicon, or Cyclocon I guess you could call them. Created using the First Edition Arcee mold I modded the Vehicon head and hands on to it, removed plastic and re-pegged the chest plate so it comes together, also modding the front steering column to come down in the back further. The original arm gun was shortened and modded to fit on the hand as well. A shiny gloss black/purple paint job later and this new Vehicon is ready to take on Arcee with the same speed and precision she dishes out!](userimages/customs/48000/47714-1.jpg) Motorcycle Vehicon Transformers Primeby Jin SaotomeTransformers Prime has all sorts of awesome re-designs for characters and new designs for ones we've never seen before. Arcee got a sweet new motorcyc...4 comments |
![[Galvatron] Head...modified and from a KO
Torso and Arms.....TFA Megatron
Lower waist and legs....TFP Ultra Magnus
Cannon...TFA Swindle
I thought it would be cool to add a Transformers Prime Galvatron. In a five part mini-saga Megatron gets destroyed in the very beginning and ends up becoming Galvatron.](userimages/customs/47500/47215-1.jpg) Galvatron | ![[Ratchet] Another repainted prime figure. The figures we get are really stripped down, i am just trying to make them look more show accurate. The EKG came out worse than i wanted it to, but i don't think the toy is in the right preportion, the window didn't line up right.](userimages/customs/46500/46339-1.jpg) Ratchet |
![[Rodimus - Prime] Hello Realmers!
This time around, I decided to do my first attempt at customizing a Transformer. I had purchased a Prime Vehicon on a whim because, as the Prime series goes, this is to me one of the best looking figures. It sat on my shelf for some time when one day it clicked...
This figure is PERFECT as a Rodimus! Other than layer after layer of Testors model paints, the only physical changes I made were carving out a mouth, and drilling holes for the blasters on his arms, which were from some Cyberverse Wheeljack's I picked up on clearance specifically for this. Oh, and the Autobot insignia on his chestplate was cut from an Alternators Smokescrean blaster. Rodimus was one of my most favorite TF's as a kid, and I'm thrilled with how this turned out. Hopefully other fans of his will feel I did him justice.
For those who like backstories, here's how I explain his sharing a common form with half the Decepticon armada:
During the peak of the Great War for Cybertron, Alpha Trion set in](userimages/customs/46500/46259-1.jpg) Rodimus - Prime Transformers Primeby GlitchHello Realmers!
This time around, I decided to do my first attempt at customizing a Transformer. I had purchased a Prime Vehicon on a whim because, as...5 comments | ![[Knockout] Another Prime repaint. I tried to get him as close as i could to the cartoon. Cheaper than getting a sheet of stickers.](userimages/customs/46000/45956-1.jpg) Knockout |
![[Arcee] Just painted the right parts pink to match the cartoon.](userimages/customs/46000/45882-1.jpg) Arcee | ![[Grimlock] BODY Generations Megatron
HEAD PCC Bombshock
After seeing the new Generations Megatron I thought it would be awesome to make a Grimlock custom. It was after seeing Bombshock that his head was screaming...Grimlock. There you go...I give you.....Transformers Prime Generations Grimlock.](userimages/customs/44500/44215-1.jpg) Grimlock |
![[The Decepticon Warship the Nemesis] BASE 2007 movie Megatron. After watching all the episodes of all the Transformers series I had to wait until I had the ingredients. I an happy with the outcome of the warship.](userimages/customs/44500/44205-1.jpg) The Decepticon Warship the Nemesis | ![[Megatron] BODY RID Megatron HEAD Generations Megatron After buying the Genarations tank version MEGATRON, I used the head for my RID Megatron. I used the Megatron tank version for my Grimlock custom.](userimages/customs/44500/44176-1.jpg) Megatron |
![[Movie Optimus Prme] This time I went all out. I wanted to do a movie style Optimus Prime It took several coats of blue and red paint along with lots of sealing. The guns are made from the optimus prime's hand guns fused with some gundam parts. and the swords are made from various fodder laying around. I hope you all like this one](userimages/customs/44000/43613-1.jpg) Movie Optimus Prme Transformers Primeby spartan0225This time I went all out. I wanted to do a movie style Optimus Prime It took several coats of blue and red paint along with lots of sealing. The guns ...2 comments | ![[Meagatron V2] This is megatron version 2 all I did buffed up the armor a little glossed it up a bit and went a darker purple then my first one](userimages/customs/43000/42979-1.jpg) Meagatron V2 |
![[Nemesis Prime] I love how these figures look, So when I saw the episode of Transformers Prime that had nemesis prime in. So I got an idea about doing my own nemesis with my own look to him. I wanted him to look very much like the optimus I painted and dont at the same time. by adding various spikes and machine guns on the body. I also rebuilt his and gave him a dark energon axe that I made](userimages/customs/43000/42978-1.jpg) Nemesis Prime Transformers Primeby spartan0225I love how these figures look, So when I saw the episode of Transformers Prime that had nemesis prime in. So I got an idea about doing my own nemesis ...3 comments | ![[Optimus Prime] I`m a big fan of the new transformers cartoon and I had to get my hands on Optimus. I was also a fan of the first and the third film so I added the gold fade up the front of the hood of the truck and I gave him movie inspired flames. I didnt really like the blaster he came with so I modified it to look more the like the show. Let me know y`all think](userimages/customs/43000/42955-1.jpg) Optimus Prime Transformers Primeby spartan0225I`m a big fan of the new transformers cartoon and I had to get my hands on Optimus. I was also a fan of the first and the third film so I added the go...3 comments |
![[Megatron] The only thing I did was give him a repaint since the hasbro release was really weak in color so I made look a little brutish and evil the way he is meant to be. Also I fixed the sword in the ready position I like it better that way. This was my first transformers I painted in super long time so let me know what you all think](userimages/customs/43000/42749-1.jpg) Megatron Transformers Primeby spartan0225The only thing I did was give him a repaint since the hasbro release was really weak in color so I made look a little brutish and evil the way he is m...1 comments | ![[Megatron] The R.I.D. Megs isn't that bad all in all, but was losing bad in style points. The show Megatron has such a cool multi-shaded, dirty metallic look that it had to be given to this guy. A deep metallic purple was used for the cannon and other purple areas. It took a while to get it done but was worth the time!](userimages/customs/43000/42605-1.jpg) Megatron |
![[Optimus Prime] I started watching Transformers Prime and knew I had to have one of the most badass versions of Optimus to date. Then I got the American R.I.D. version and was disappointed at how awful the sculpt was. I was getting ready to tear him apart and put something together that was more show accurate. I decided to turn him into Nemesis Prime.
I picked up a First Edition not too long ago and just tweaked him with some paint apps all around to be more show accurate. I used different shades of metallic silver throughout and bright blue for weapons accents. This is a more clean look before a eventual more battle tested look like the show is applied](userimages/customs/43000/42601-1.jpg) Optimus Prime | ![[Transformers Prime BULKHEAD] hey everyone, this green machine has a full repaint using lots of thin airbrushing, washes and multiple seals :) also i modded the chest panels made to have clear windows, neck setup and the rear wings/body panels so they look better in his bot mode. hope you all like him!](userimages/customs/42500/42488-1.jpg) Transformers Prime BULKHEAD Transformers Primeby Sabretoothhey everyone, this green machine has a full repaint using lots of thin airbrushing, washes and multiple seals :) also i modded the chest panels made t...5 comments |
![[Ultra Magnus] I thought I would use my DOTM Optimus Prime and create a Transformers: Shadows of Cybertron Ultra Magnus. I figure I would start my own storyline where Optimus Prime, Bumble Bee, Cliffjumper, Topspin, Wheeljack and Jazz return to Cybertron...only to find their home planet un-inhabital.](userimages/customs/42500/42150-1.jpg) Ultra Magnus | ![[Prowl] I had an extra DOTM Barricade... After trying the Sideswipe's head, I used the white primer spray paint and spray painted the head white. After I let it dry, I put it on Barricade's body. Then I took gloss black paint and painted over the Decepticon logo and the punish and enslave captions. In the end, ..... Presto...... I give you my version of Transformers Prime Prowl.](userimages/customs/42000/41962-1.jpg) Prowl |
![[Slipstream] A few weeks ago I saw a preview picture of the TFCC Slipstream figure, and was really excited because she was the one I was most disappointed never got a figure released while Animated was the new toyline. But I was unwilling to go through the trouble of joining the TFCC and paying the higher price to get the figure, so I had a friend of mine in Canada send me a FE Starscream so I could make her myself! Slipstream is basically a repaint, though I did mold a new crest on her head out of super sculpey. I also deviated from the official toy's color scheme a little bit to make it slightly more accurate to her original cartoon appearance, like the silver midriff. So what do you think? Did I do better than hasbro?](userimages/customs/41500/41289-1.jpg) Slipstream | ![[Scorponok (Version 4)] Same as the other previous versions. I modified the version 4 with a scorpion head modified with megatrons head. I used his jaw for the scorpion mouth...followed by using Skullgrins axe as the scorpion fangs..along with the movie scorponok head. As far as the feet goes, I used Deluxe class Ironhide. He had the correct feet I was going for. After completing him.. I do not have the photo with his weaponry added. He is loaded to the gills with fire power. Everything else is complete...including his correct jet mode. As mentioned on the youtube page, he will have a robot mode, scorpion mode, jet mode, tank mode, city mode and finally a battle station mode.](userimages/customs/41000/40887-1.jpg) Scorponok (Version 4) |
![[Scorponok (Version 3)] Based off my previous versions, I made a few alterations. I took the voyager movie optimus prime feet and added them to Scorponok to give him the extra voyager class height. I took LongArms head and modified it. On youtube, he has two new transformations...a lion and a tank mode. It is youtube and the channel is 37Russdawg. Photo 1..robot mode Photo 2..scorpion mode Photo 3..city mode.](userimages/customs/41000/40817-1.jpg) Scorponok (Version 3) | ![[Scorponok (Version 2)] Head.. Jolt
Arms.. RID Oranhe Bulldozer character
Hands.. Generations Devastator
Rest.. Skullgrin (modified with Movie Scorponok)
As continued from my first submission, I said I was going to debut my version 2. And so, here he is. Modified with multiple parts, this time he turned out better than the first. Only one area that isnt repainted is his claws. I went ahead and left them the color, a royal blue. He does have a city mode. If you want to view the review, go to youtube and type in my channel..37Russdawg. Also, I did make a Decepticon Dark Energon Matrix of Power that can only be used with certain Decepticons that are in a leadership position..just like the Autobot Matrix of Leadership.](userimages/customs/41000/40765-1.jpg) Scorponok (Version 2) |
|