![[Batman Dark Knight Rises] Hello, this a simple work, a Batman begins bootleg knock off action figure turn into Batman dark knight rises. Entire suit has been hand re-sculpted with epoxy putty, repainted in black and I added the fabric layer.
thanks for watching!!!
sorry for the bad english.
JR](userimages/customs/49500/49324-1.jpg) Batman Dark Knight Rises | ![[Bane] Neca jungle patrol dutch base body. removed head.
Movie masters Bane head and jacket.
Removed the head and jacket and placed them on the Dutch body. Painted Banes jacket and arms the same color brown with a paint sharpie. I then painted the Dutch base body tan shirt, grey.](userimages/customs/49500/49070-1.jpg) Bane |
![[Bane] Hey guys! Here's Bane in a slightly different look. Not a lot of sculpting done here other than adding the scar running down his spine. All finished off with multiple shades of dry brushing in greens, browns and tans. I even added some mud to his pants and boots. His belt is even removable. Hope everyone enjoys it and thanks for looking.](userimages/customs/49000/48564-1.jpg) Bane | ![[Batman - the Dark Knight] Torso: ROC Impact Armour Duke
Head, Shoulder Pads, Belt, Cape & Gauntlets: DKR Batman
Lower Legs: ROC Crimson Viper
Fully articulated, minimal painting.](userimages/customs/48500/48346-1.jpg) Batman - the Dark Knight |
![[Bane] Body and Head: Custom sculpt (Stoccos28)
Arms and Legs: Retaliation Roadblock
Batman Mask: Dremmeled out DKR Batman head](userimages/customs/48500/48320-1.jpg) Bane | ![[John Blake Nightwing from the Dark Knight Rises] Hey guys! This is just a redo from my last try. Updated his head articulation and nun-chuck/ nun-chuck holders. Hope you guys like :)](userimages/customs/48500/48095-1.jpg) John Blake Nightwing from the Dark Knight Rises |
![[Catwoman (Movie Concept)] This is my own original concept for TDKR's Catwoman. When I first heard Catwoman would be featured in The Dark Knight trilogy, I was extremely excited, and I did what I always do- draw up my own vision of what I hope for. I've gotta say- I was a little disappointed of the Catwoman that was featured. As sexy as she looked, Nolan made such a point in the other Batman films to make them as real-world based as possible.
My version of Catwoman does not wear heels, as that would be impractical for a burglar, and she sports a backpack to carry what she steals. In my mind, this Selena Kyle would have robbed Wayne Enterprises- getting her hands on some of that tech and gadgets. She wears the same antennas as Batman to listen in on police frequencies, and when she puts her hood up, it gives that "cat ear" look. Her gloves have retractable claws that use sonic vibration to cut glass, and suction-cups on her palms, making it easy to cut into windows, jewelry cases, etc. She also has va](userimages/customs/48000/47564-1.jpg) Catwoman (Movie Concept) | ![[Artic-Armor Batman] I saw the grey and black TDKR batman figure, but could never get my hands on it, so I decided to make my own. Just a simple repaint of the movie figure.](userimages/customs/47500/47028-1.jpg) Artic-Armor Batman |
![[Bane] I loved the TDK Rises movie, however I was VERY unimpressed with Mattel's bane figure they released. Resently, I purchased a batman bane combo pack on sale and decided to completely repaint bane. I covered the figure in primmer gray and started from the boots up repainting. Also for fun I made a small base depicting the Gothan Sewer catwalk for him to stand on using pieces of fodder. I also wired some L.e.d lights into the water as well to give it a cool effect. Hope you enjoy!!! Please comment](userimages/customs/47000/46982-1.jpg) Bane | ![[Bane (Tdkr)] Hello realmers!!! Recently I bought a Movie Masters TDKR Batman in a flea market, although the price was not the price you could expect in a flea market, it was $13 dlls. Even though the sticker says "clearance price: 9 dlls". Anyway, I bought it because the only TDKR action figures that Mattel did bring to México were the 3.75 in. little action figures (very crappy btw).
So, It was great for me to find a Movie Masters Batman, although the price was not, as I said before, the price you expect to pay in a flea market.
"I've got a new MM Batman" - I thought... but then I realized It would be perfect if I could get a MM Bane, unfortunately there are to little possibilities to find one, so the only way to give a partner to my new Batman is... well, what I'll show you next.
On the custom.
____
I'm so happy with how this figure turned out because in the very beginning of the project I stated to use less fodder as possible and try to create as many as possibble](userimages/customs/47000/46731-1.jpg) Bane (Tdkr) |
![[Bane 5inch Figure Walmart Exclusive (Professionall] Continuing with my Dark Knight Rises customs, next up is Bane. Ever since I saw the 5 inch Walmart figure I liked it, however the lack of paint applications, made it look like a crappy figure. After seeing tons of picture references from the movie and the Hot toys figure, I was able to paint Bane with the correct skin color, aged pads on the vest, texturing on the pants, accurate mask and eyes. It's a pitty to see where the american toy industry is going, reducing articulation and paint applications. (see the iron man 3 toys...) After acquiring my first Hot Toys figure,(Dx-12 batman) my eyes have been opened to a new standard of quality and craftsmanship that we -as customizers/artists- should strive to imitate and surpass, and its a pitty to see that those high standards are not coming from US toy companies anymore....They come from China,Korea and Japan...Are we going to let that happen? time will tell.](userimages/customs/47000/46565-1.jpg) Bane 5inch Figure Walmart Exclusive (Professionall | ![[Batcave / Batarmory Tdkr Diorama Version 2] This version 2 batcave / batarmory diorama is made from versa board and acrylic plastics. Cut and glued together . Painted with flat black acrylic paint, weathered by lacquer and enamel paint and then top coated with gloss polyurethane paint to make a wet effect. Figure is from sdcc tdkr batman .](userimages/customs/46500/46425-1.jpg) Batcave / Batarmory Tdkr Diorama Version 2 |
![[The BAT 6' Figure Scale] Hello everyone, this is my latest piece, from the newest batman film ; the dark knight rises...a 1/12 scale (in scale with the 6" mattel movie master figures)
"the Bat"! this was entirely scratch built, features 6 leds with a AA powerpack, opening front canopy that allows a 6' batman figure to be placed inside the cockpit and a screw in 7" base stand.the dimensions on this are 28" x 16" x 10" roughly.
this took over a month to build and waaaaay waaaaaaaaaaaaaaaaay too much of my time and money but i hope you all like it.](userimages/customs/45500/45394-1.jpg) The BAT 6' Figure Scale | ![[Dark Knight Rises Nightwing] Ahhh, finally got some time for some customizing, and I'm about...oh, six months late to the "John Blake as Nightwing" party. Nothing too crazy here; DKR Batman body and the head from the TRU-exclusive Nightwing. I brought down the shoulder pads a bit, added some sculpt to fill in some gaps, and did a full repaint in flat black and french blue, completed with a layer of matte spray.
Thanks for looking!](userimages/customs/45500/45319-1.jpg) Dark Knight Rises Nightwing |
![[John Blake Nightwing 3] This is my 3rd and last robin/nightwing concept. I reall liked the idea of a john blake nightwing and went crazy. Basically a dark knight batman, a john blake head, a paint job and some custom accessories. I might be selling my old nightwing with the survival suit body soon too, but im still deciding. Hope you guys like!](userimages/customs/45500/45068-1.jpg) John Blake Nightwing 3 | ![[Bane] BANE
The Bane is a very tough guy who is very evil, that simply being born a powerful and vile creature, so apply what I felt I had to be stronger and bigger than Batman, giving strength to the character with great textures and details incredible.](userimages/customs/44000/43955-1.jpg) Bane |
![[Bane] My buddy has been asking me to make him a Bane since he saw the Dark Knight Rises so i finally gave in...
I sanded the head of the M.L. Icon punisher and smoothed out his bald head, sanded off the short sleeves on arms. Cut off boot gun holster and knife sheath. Used foamies and some sculpt for mask. Added some military fodder to shirt and the rest is paint.
Let me know what you guys think, hope you like em...](userimages/customs/44000/43773-1.jpg) Bane | ![[TKDR Nightwing] Been wanting to do this figure for awhile now. This has been done a few times on here before so I followed the recipe from my predecessors with just a lil tweak I added magnets in his back to hold his trade mark batons.](userimages/customs/44000/43672-1.jpg) TKDR Nightwing |
![[Tdkr Bane] I just think it is time update the look of my previous bane custom. still the same base figs. this time i made him a real pants, added the length of his legs and made the arms thinner than the last design.](userimages/customs/43500/43419-1.jpg) Tdkr Bane | ![[TDKR Bane] "Ahhh yes I was wondering what would break first..........you spirit.....OR YOUR BODY!".
K so this is my last TDKR Bane, I swear. This guy was a big sculpt job, I use a wwe elite figure base
then sculpted the vest. I also shortened him and re-sculpted the legs to fit the Movie Masters figures, also straighten up the mouth piece that I found to always be lop sided.
Hope you like.](userimages/customs/43500/43297-1.jpg) TDKR Bane |
![["Robin" John Blake] For this figure, I used a Survival suit Bruce Wayne buck, with a John Blake head. A cape from the Batman Begins Movie Masters figure, and the removable orbs are from a Dr. Doom movie figure. The mask is a combination of a Cyclops visor and a Robin visor from the Batman & Robin toy line.](userimages/customs/43000/42876-1.jpg) "Robin" John Blake | ![[Neca Movie Bane from the Dark Knight Rises] Well this guy was extremeley hard to do, First i took a Neca Duke Nukem & repainted his shirt green, took off the straps, & then I took pieces of leather & cut them into the shapes of Banes chest plates, then I took some brown cloth & made the straps, took some green cloth for the smaller 2 straps, & then I took red string for the red string thingies. He was missing a hand & the other one had no fingers so I had to improvise, I took wwe mattel fist hands & tried popping them in but it didnt work so I sculpted them onto the wrist, then I painted the base of the arm brace & then I sculpted the details of it, I gave the hands a brown wash, for the left hand I kept the sculpted part white or whatever color the clay is But I gave it a light brown wash but rubbed it in, for the belt I just sculpted it & then drew on the buckle because I couldnt get it right by sculpting it because its so small, for the pants I gave it a black base coat. then a faded grayis](userimages/customs/43000/42856-1.jpg) Neca Movie Bane from the Dark Knight Rises |
![[TDKR Batman with EMP Gun] Not a huge fan of this one but I think it still deserves to be put here. The EMP Gun doesn't exactly resemble the one used in the movie nor does Batman. The figure as a whole works as more of a concept than an accurate depiction. Lemme know what you guys think. Comments as always are welcome.](userimages/customs/43000/42756-1.jpg) TDKR Batman with EMP Gun | ![[Dark Knight Rises John Blake Robin] This is my second John Blake custom (first being nightwing). Again I used a survival suit Bruce. I painted him red and green and added the gold "R" and buckles. The cape was made from a Batman Animated Series cape and i added fabric pain to it. The glider and nightstick I made myself with Apoxie. Hope you enjoyed!](userimages/customs/43000/42548-1.jpg) Dark Knight Rises John Blake Robin |
![[Ras' Al Ghul (Marvel Universe Inch Scale)] "crime cannot be tolerated"
Continuing with my Nolan trilogy inspired characters, I made Ra’s using the head of a Qui Gon Jinn figure from Star Wars, trimming the beard on the sides and resculpting the hair and goatee.
The alternate head features a mask as seen in the last moments of the Batman Begins movie. The height of the figure was also slightly modified so it's taller than other MU figures (Cause Liam Neeson is one tall guy!)
Thanks for checking it out!](userimages/customs/42500/42455-1.jpg) Ras' Al Ghul (Marvel Universe Inch Scale) | ![[Dark Knight Rises John Blake Nightwing] All I did was take a survival suit Bruce Wayne and cut off all of the extra pieces that were not needed. I painted the nightwing symbol on from front to back and had to put apoxy on his ball joint so his head could fit on. Then i used the john blake head and painted the mask on. Robin is coming soon! hope you enjoyed!](userimages/customs/42500/42417-1.jpg) Dark Knight Rises John Blake Nightwing |
![[John Blake (the Dark Knight Rises) - Custom Figure] I ordered a John Blake online and I thought he looked pretty good. The paint application although very clean, I found to be very shiny like the rest of the TDKR figures. Once again I wanted to repaint this figure to give him a nice matte finish. So, using acrylic paints, I repainted John Blake. Not a major custom,and not a major difference either in the finished product, but I thought I'd share with you guys anyway. Please check out my other TDKR custom repaints on my profile :] and thanks for checking this out!](userimages/customs/42500/42164-1.jpg) John Blake (the Dark Knight Rises) - Custom Figure | ![[Robin] This is my concept of what a Robin costume in Chris Nolan's universe.
try to shape the face of JG Levitt for this job, I hope you like
sorry my English is bad](userimages/customs/42500/42107-1.jpg) Robin |
![[Bane (Fully Articulated Marvel Universe Style)] "When Gotham is...ashes, you have my permission to die..."
I never get tired of hearing that. Continuing with my line of 3 3/4 inch fully articulated Dark Knight Rises figures, here is BANE in all of his articulated regalia as he should have been.
The figure was made out of a combination of parts from Absorbing man donating the head, arms upper legs and the tiny Mattel figure donating the torso and boots. I was planning on using the same head that came in the Mattel offering but when the figure's body was fully tooled it had gained bulkiness and size, and it looked too small, so I had to quickly search for the head of absorbing man, shave the upper cranium (he has a very funny shape) and sculpt the Bane mask and all of its intricacies in less than 3 hours...sometimes when I have a whip on my back, my work comes out better than expected....go figure.
Anyway, Bane comes with a broken Batman mask that he can hold on his hand or just leave in the floor, and a stand with rusted](userimages/customs/42500/42011-1.jpg) Bane (Fully Articulated Marvel Universe Style) | ![[The Dark Knight Rises the Bat Custom Vehicle] Inspired from the movie dark knight rises film, this custom vehicle is made from styrene acrylic plastics, manually cut and glued together, we added led lights and to rotating rotor blades which is operated by a power supply the size of this vehicle front to back is around 32 inches and 14 inches in length, it has two opening cockpit that fits the movie master figures of tdkr. Enjoy](userimages/customs/42000/41858-1.jpg) The Dark Knight Rises the Bat Custom Vehicle |
|