![[Green Lantern in Action] Green lantern figure, epoxy and paint job, plastic green cup y led light.](userimages/customs/50000/49792-1.jpg) Green Lantern in Action | ![[Molecule] Name: Molecule
Base: Superman
Paint: Testors Enamel
Testors Spray Lacquer Dullcoat
First off I'm kinda limited on fodder at the moment, so I have another custom made from a old Superman that I found for like fifty cents. On this one I tried my hand a bit of a pre-wash but I found out that I didn't have the right type of grit for sandpaper. None the less I think it turned out ok though. Please pardon any small missing paint as it most likely came from when I handled the figure when Dullcoating it. As for the pictures, I had my desk lamp on nearby and if I turned it off it was way too dark. So, I hope this work of Superman into Molecule of the Teen Titans turned out ok.](userimages/customs/49000/48663-1.jpg) Molecule |
![[Lightray] Tools used; Testors Enamel Paint, Clear ponytail holders, yellow foam board...
This is a new hobby of mine. A friend of mine just recently got me into it and I'm still very new and green at this. So far I'm starting off rather small, so a repaint of sorts. For this I decided to make Lightray of the New Gods out of a ten point articulated Superman from one of the earlier JLU series. Again, it's my first so I hope I did at least half way decent. :/](userimages/customs/48500/48432-1.jpg) Lightray | ![[Paradise Island] JLA Heads, Jashapon Bodys y Playmobil plastic Rocks, epoxy, paint Job y Wooden Base.
It took me a while to find each of the figures](userimages/customs/47000/46744-1.jpg) Paradise Island |
![[Vigilante] Vigilante figure repositoned with epoxy
Diecast motorcycle
Paint job](userimages/customs/47000/46712-1.jpg) Vigilante | ![[DC JLU Atom Smasher] Wanting the Atom Smasher in bigger scale than the existing original JLU figure.](userimages/customs/47000/46678-1.jpg) DC JLU Atom Smasher |
![[Superman beyond] I got this guy off Ebay. Flew in from China for only a $1. I'm still learning the craft of Customizing; so i'm practicing a lot. I liked how this turned out.
I used tesTors black, white, and blue enamel. Sculpted the hand, forearm, shoulder, and calves "armor" with Epoxy. When I took off his cape I filled in the holes with Epoxy as well. Cheers!](userimages/customs/47000/46605-1.jpg) Superman beyond | ![[White Lantern Superman] Engraved the White Lantern symbol, and did a full custom paint job.](userimages/customs/44500/44481-1.jpg) White Lantern Superman |
![[Martian Mannhunter] A Mix with a Lex Luthor head and Sinestro Body. The cape was made with a peace of plastic and the colar I took from a Destro figure](userimages/customs/42500/42259-1.jpg) Martian Mannhunter | ![[Green Lantern Guy Gardner] I bought a box with several pieces of action figures from a friend, and came two dolls League Unlimited. After much thought, I decided to do a Guy Gardner, using a Sinestro's head in the body of a Lex luthor. He gave perfect, because of the Sinestro' grumpy face.
Just had to carve the details of the vest and hair "Three Stooges' Moe" style. I think the result was good, but now I think what to do with the Sinestro body. Any suggestions?](userimages/customs/41500/41127-1.jpg) Green Lantern Guy Gardner |
![[JLU Artemis as Wonder Woman] This was my first custom i ever made. its very simple :-)](userimages/customs/39000/38540-1.jpg) JLU Artemis as Wonder Woman | ![[JLU Style Jonathan Kent/Phantom Stranger] More of the son of Superman and Wonder Woman from The Kingdom.
I wanted to see him in a Bruce Timm style, and I had some JLU figures I couldn't manage to sell, so here we are.
His cloak really did not like paint. It looks fine to the naked eye, but a camera with a flash seems to pick up all sorts of nasty stuff on it.](userimages/customs/38000/37647-1.jpg) JLU Style Jonathan Kent/Phantom Stranger Justice League Unlimitedby RMKMore of the son of Superman and Wonder Woman from The Kingdom.
I wanted to see him in a Bruce Timm style, and I had some JLU figures I couldn't manag...0 comments |
![[JLU Batwoman] It looks like a simple custom but it sure bloody damn difficult to make it good....](userimages/customs/37500/37368-1.jpg) JLU Batwoman | ![[Gypsy] this custom figure is about a year ago, though it is not a famous character i really like the outcome of this figure it was sculpted by then one of my new artist Lyndon, he really captured the looks on this one, hope you like it guys!](userimages/customs/36500/36480-1.jpg) Gypsy |
![[Justice League Unlimited Arnold Stromwell] made from a bruce wayne batman beyond base. modified the face with super sculpy.](userimages/customs/34500/34334-1.jpg) Justice League Unlimited Arnold Stromwell | ![[JLU Green Lantern ARISIA] Small changes with epoxy: gloves and tops of boots and a rubber skirt. All painted with vinylic paints.](userimages/customs/32500/32061-1.jpg) JLU Green Lantern ARISIA |
![[JLU Black Flash Costume] Simple repaint on a JLU Flash for a friend. Used model master acrylic red and black, the hardest part was the logo. I even repackaged him in the box with the lighting bolt accessory also painted red but didn't get a pic of it before I send it off.](userimages/customs/30500/30343-1.jpg) JLU Black Flash Costume | ![[Baby Supergirl] I had alot of fun making the wonder woman as a baby that i decided to make super girl as a baby. i took another doll from my daughter to make her dont worry she has more then enough toys. I painted her into the costume, then i sewed her a little cape. she didnt have it on yet in the picture though. this super girl is blowing a kiss. she was sealed for protection and she stands about 4.5in. keep your eye out for other baby super heros.](userimages/customs/29500/29214-1.jpg) Baby Supergirl |
![[The Bulleteer] The helmet, chest, boots, glove, and trip is all super sculpy. Applying the trim was probably the toughest part with this method, but it came out pretty good. The other trick was sculpting the helmet and curing it without it drooping too badly; used the boiling water method.](userimages/customs/29000/28727-1.jpg) The Bulleteer Justice League Unlimitedby KennThe helmet, chest, boots, glove, and trip is all super sculpy. Applying the trim was probably the toughest part with this method, but it came out pret...0 comments | ![[Miracle Woman] The toughest part of this custom was finding an adequate reference for the costume. Eventually pieced it together and eventually opted for a more dramatic gold on the trim, rather than yellow.](userimages/customs/29000/28705-1.jpg) Miracle Woman Justice League Unlimitedby KennThe toughest part of this custom was finding an adequate reference for the costume. Eventually pieced it together and eventually opted for a more dram...0 comments |
![[JLU Kilowog] Since Mattel made the wrong size of kilowog,which I must say that it's very smaaaallll, I decided to make a new kilowog with a bigger body, so it has the real size if it's compare with the other GLs...](userimages/customs/28500/28379-1.jpg) JLU Kilowog | ![[JLU Atom Smasher 10 Inch] It took me more than a year to finish this atom smasher coz my mood often goes up & down....it's made from a bootleg batman JLU that I bought from a toyfair...resculpt the figure,repaint it, and tha daaaa......](userimages/customs/27500/27028-1.jpg) JLU Atom Smasher 10 Inch |
![[Custom 6" Animated JLU Batman] This is another 6" Custom animated Batman, from the justice league unlimited cartoon show.](userimages/customs/26000/25827-1.jpg) Custom 6" Animated JLU Batman | ![[Custom JLU Max from Batman beyond] This is Max from Batman Beyond, the DCAU. I used a jlu hawkgirl I think, and apoxie sculpt and model masters acrylics. I did it 3 years ago (its one of my first customs), before I learned how to take good pics. lol. I still think its a good add though as I haven't seen another custom of her on here.](userimages/customs/26000/25772-1.jpg) Custom JLU Max from Batman beyond |
![[Custom JLU Lex Luthor Merge with Brainiac] This is one of my first/older customs, but thought it was a good add. I used a lex luthor figure and did a lot of sculpting with apoxie sculpt. I liked this season finale for JLU, and thought it would be a cool figure to make. Sorry about the grainy pics, this was along time ago, before I knew how to take good pics. :/](userimages/customs/26000/25771-1.jpg) Custom JLU Lex Luthor Merge with Brainiac | ![[Hawkgirl Unmasked - Shayera Hol] Just a simple head swap of the Lt. Shayera Hol figure with the regular Hawkgirl body. I wanted this one for a long time and am surprised that Mattel hasn’t released one yet. Simple but effective custom. Looks great on the shelf!](userimages/customs/26000/25547-1.jpg) Hawkgirl Unmasked - Shayera Hol |
![[Ultraman] This Ultraman version is based on Justice League movie Crisis on Two Earths.
Recipe: Epo putty to make it taller and more muscular than Superman, also for the details. And Acrylic paint for finishing.
Any comment would be great, Thanks.](userimages/customs/24500/24028-1.jpg) Ultraman | ![[Catgirl] This is a custom based on a internet fan fic story which is a alternate ending of the Batman Animated episode... BATGIRL RETURNS... in which Batgirl accepts Catwoman's offer to join her as her partner in crime... becoming CATGIRL.
I based the figure on a DC Universe Justice League Batgirl figure... and tried to design the costume as if it was a combination of Batgirl's costume and Catwoman's Grey Suit which Catwoman wore in the episode... I used Epoxy Clay to sculpt the boots and ears... And to smooth out where I had cut off the fins? on Batgirl's original gloves... I also used acyrlic paint to repaint the figure... and clear gloss afterwards...](userimages/customs/24000/23779-1.jpg) Catgirl |
![[Ultimate Superman] I really put my heart in doing this "ALL ORIGINAL SUPERMAN CUSTOM FIGURE".Most of the available figure are not that articulated and if there was, it's either the scale is small and the features were not that good. I think i wanted a Superman that should be with bulk and super Articulated at the same time..and somehow looked liked Christopher Reeve at 7" scale.
Apart from the action figure, I have also studied making resin molding and created Superman's lamp base..Lots of sanding and sculpting on the head..Hope you like em' cause I love em so much!](userimages/customs/23000/22923-1.jpg) Ultimate Superman | ![[Powergirl] Just took Galatea, added some volume to the brests (epoxy) and then repainted. The cape came from another female JLU figure (I can't remember which).](userimages/customs/21000/20701-1.jpg) Powergirl |
|