![[League of Shadows Bruce Wayne] The next on my Nolan trilogy characters is Bruce Wayne in his League of shadows costume (or as itis known : Ninja Bruce Wayne) His uniform has been sculpted with an insane amount of detail on the chest, shoulder pads, back etc., all taken directly from the movie, storage for his sword, alternate ninja head, etc The base figure was the Black Spider-man from the universe line, and the feet,arms and head from the ninja Bruce from the Target 3 pack. Thanks for checking it out!](userimages/customs/43000/42660-1.jpg) League of Shadows Bruce Wayne | ![[Scarecrow (Marvel Universe Scale)] Continuing with my Nolan trilogy characters in Marvel Universe scale, here I present you with Doctor Crane, aka Scarecrow. His head was sculpted from scratch using the Movie Masters figure as a reference, so every seam, cut etc was replicated. The puff of fear gas is removable and made of plexible plastic. This Scarecrow is now ready to terrorize your Marvel Universe, Star Wars, or even G.i.joes!! Thanks for checking it out](userimages/customs/42500/42246-1.jpg) Scarecrow (Marvel Universe Scale) |
![[Movie Masters League of Shadows Batman Begins] heres 1 of the custom i made movie masters league of shadows,took some time with these 3 figure lot comes with 2 swords and can hang on there back too](userimages/customs/42000/41855-1.jpg) Movie Masters League of Shadows Batman Begins Batman Beginsby legend1483heres 1 of the custom i made movie masters league of shadows,took some time with these 3 figure lot comes with 2 swords and can hang on there back too...5 comments | ![[Ninja Bruce Wayne] Last super-easy Batman film custom for a while, I swear.
I noticed that the Dark Knight Rises Bruce was just a repainted and rescaled Ninja Bruce Wayne. So I repainted it.
Color may not match exactly because I don't have the figure and couldn't find a great pic of it. Either way I'm happy to have it on my shelf.](userimages/customs/41500/41436-1.jpg) Ninja Bruce Wayne Batman Beginsby ninjinisterLast super-easy Batman film custom for a while, I swear.
I noticed that the Dark Knight Rises Bruce was just a repainted and rescaled Ninja Bruce Way...0 comments |
![[Batman Begins Water Vapourizer | Microwave Emitter] well im the first
not sure if anyone has ever wanted one before so no one bothered but i wanted it
and its my first with led lighting
and yellow so its movie accurate
so its a lot of polyfoam fully sculpted from scratch
and pins and glue
i attempted this a few months back but near completion used superglue wich melts polyfoam so i gave up
but then tried again and im happy with it
its not movie accurate as on the sides there should be some poles like a piston type thing but i couldn't get it to stand stable with them on so i took them out and took the sides inwards and pegged them there (and glue)
looks great still anyway
i am happy with it
sadly i had no yellowish paint all i have now is white and black so instead of having it same colour as movie i went with white
dilligaf?
update
nuffsaid is gonna do one inspired by me and without a doubt better detail
and im purchasing it off of nuffsaid once complete...wooooohoooo](userimages/customs/41000/40668-1.jpg) Batman Begins Water Vapourizer | Microwave Emitter Batman Beginsby Chester001well im the first
not sure if anyone has ever wanted one before so no one bothered but i wanted it
and its my first with led lighting
and yellow so ...2 comments | ![[Henri Ducard / Ra's Al Ghul] Just a wee bit more complicated than my previous "custom", Ducard/Al Ghul was only a wee bit more than a headswap.
I started by chopping the length of Qui Gon Jinn's hair, and painted a bit of gray into it and the beard. I already had the body from the previous figure (Batman Unmasked) free so I stuck it on and painted the gray of the dogi black and glossed it up.](userimages/customs/41000/40510-1.jpg) Henri Ducard / Ra's Al Ghul Batman Beginsby ninjinisterJust a wee bit more complicated than my previous "custom", Ducard/Al Ghul was only a wee bit more than a headswap.
I started by chopping th...0 comments |
![[Batman Begins Ra's Al Ghul] Since Mattel is lazy and more then likely just release the same figures over and over again I took it on to make
a Liam Neeson Ra's Al Ghul. Its made from a Dark Knight Harvey Dent with a sculpted head.](userimages/customs/40500/40059-1.jpg) Batman Begins Ra's Al Ghul Batman Beginsby nuffsaidSince Mattel is lazy and more then likely just release the same figures over and over again I took it on to make
a Liam Neeson Ra's Al Ghul. Its made...15 comments | ![[Batman Begins | Tom Wilkinson | Carmine Falcone Mo] well my original i ended up giving backto gordon
so i used my original commissioner gordon body for falcone
done some more detailed analysis into clothes tom wilkinson wore in bb and came with this
just like when he was on the batsignal/light/ searchlight at the docks
in which scene he wore
brown suit
redish brown shoes
darker brown jacket
i got a lot of good feedback on here and elsewhere about my tom wilkinson head being good resemblance so i use dthat
gave him a underjacket/suit jacket underneath the jacket
full repaint
thanks fo rviewing
and its good that now i have the official alfred, now my alfred (caine) and carmine falcone (wilkinson) don't look alike
thanks for viewing
p.s i want to update my ras al ghul i want to update and have been planning to but rumors of secret figure mean i'm gonna wait for official to come out if there is one so i'll wait for a liam neeson official to be released if it is?
if not then i'm redoing the head](userimages/customs/40000/39708-1.jpg) Batman Begins | Tom Wilkinson | Carmine Falcone Mo Batman Beginsby Chester001well my original i ended up giving backto gordon
so i used my original commissioner gordon body for falcone
done some more detailed analysis into clot...2 comments |
![[League of Shadows Bruce Wayne Ninja.] I always wanted a League of Shadows Ninja Bruce Wayne figure, So I decided to make it. This is also my first custom. Now lets get started, I started with a Survival suit Batman, I had a spear one so lucky me lol. The chest peace is really a 3D glasses lens I just painted black. The shoulder pads are from a Ducard Batman begins 5 inch figure. The mask is from a smaller League of Shadows figure from the Batman Begins toy line. Luckily I lost that figure a few years ago but the mask stayed with me so I'm rather lucky to have found the mask just the other day. The mask I was going to use was a cheap cloth mask I made, I think this one looks way better. The mask is also removable but I prefer to keep it on because it was a real pain putting it on the head. Because this head is bigger then the actual size head the mask was for, I then shaved a bit of the hair from the top and the sides so it could fit better. It did, But just a bit, Still I think it looks good. The armor under the waist and](userimages/customs/36000/35808-1.jpg) League of Shadows Bruce Wayne Ninja. | ![[Arkham City/Modern Robin] Hello! New Customizer posting for the first time. Only been doing this a few weeks. Hope you like it.
A modern Robin inspired by Arkham City.
Body : Batman Begins Movie Masters Batman
Head : DCU Classics Kamandi head (re-sculpted)
Tons of Aves sculpt & paint.
Cape and hood are a suede-like material, hand crafted.
Criticisms welcome as they help. Thanks!](userimages/customs/35500/35051-1.jpg) Arkham City/Modern Robin Batman Beginsby Magical_Rat_Hello! New Customizer posting for the first time. Only been doing this a few weeks. Hope you like it.
A modern Robin inspired by Arkham City.
Body :...7 comments |
![[Batcycle MV] The same recipe that my Tumbler, Full camouflage paint job, and details in chrome, and copper.](userimages/customs/34000/33719-1.jpg) Batcycle MV | ![[Batman Begins Batmobiletumbler] Going back in time, I finished this Batmobile a few months back and just now was able to post it, Enjoy!!!!
I took it entirely apart, and did a full camouflage paint job to recreate the original Tumbler military vehicle.
Added some details in chrome and copper and some rubber paint for the tires.](userimages/customs/34000/33718-1.jpg) Batman Begins Batmobiletumbler Batman Beginsby shakaGoing back in time, I finished this Batmobile a few months back and just now was able to post it, Enjoy!!!!
I took it entirely apart, and did a full c...5 comments |
![[Johnathan Crane Scarecrow Batman Begins] You can see more of my Video-game custom figures on my Deviant Art Gallery (user name Niever ).](userimages/customs/28000/27799-1.jpg) Johnathan Crane Scarecrow Batman Begins | ![[Solar Suit Batman] Repaint of Batman in chrome and black and added metalized fabric cape. very simple](userimages/customs/18000/17763-1.jpg) Solar Suit Batman |
![[Ra's Al Ghul (Final Battle)] Hi everyone, thanks for looking. I’ve been a long-time viewer, and I want to thank all of you who’ve taught me so much through your awesome custom projects.
This is the first of what I hope will be many submissions, and the first in my expanded Movie Masters line: Ra’s Al Ghul.
I started with a Mr. Fantastic head sculpt, and sculpted on the beard (with hot glue) an dremmeled details like the nose and forehead wrinkles to capture Liam Neeson’s likeness.
I put the head on a Gotham City thug and painted it head to toe. I painted his gloves with the steel knuckles from his final battle on the train, and I used a gloss coating on the lapels, shoes and sides of the pants the give him that tuxedo look. The sword is from a fodder bin.
Any feedback welcome! Stay tuned for more!](userimages/customs/15500/15485-1.jpg) Ra's Al Ghul (Final Battle) Batman Beginsby Genesis13Hi everyone, thanks for looking. I’ve been a long-time viewer, and I want to thank all of you who’ve taught me so much through your awesom...1 comments | ![[Commissioner Gordon] After seeing the "Two-Face" done by SPAWNSAUCE, I felt a little bit like grovelling. Anyways, I had this head (Bomb Squad figure) from a Plan-B "Emergency" series that was pretty close to resembling some of Gary Oldman's features. Although this is what might seem like a simple head swap, I had to do some carving and sculpting. What was really hard was the eyeglasses, I took some thin clear plastic and cut it to shape, then I used staples for the ear-pieces. One of my favorite scenes from the movie is where Gordon is revealed as the mysterious van driver, then he trains a shotgun on the Joker just before he can get his paws on an unconscious Batman. I was totally surprised, I remember that I kept thinking the van driver had to be one of Joker's thugs. I shaved around the inner socket of the head so that it pops off and can be easily interchanged with either body. I really need to get a better camera, it's really hard to get a close-up, detailed shot of the fac](userimages/customs/12000/11855-1.jpg) Commissioner Gordon Batman Beginsby MaelstromAfter seeing the "Two-Face" done by SPAWNSAUCE, I felt a little bit like grovelling. Anyways, I had this head (Bomb Squad figure) from a Pl...16 comments |
![[Batman Begins custom cape] This is merely a cape creation for my Batman Begins "Batman" figure. I wanted to make his cape as it appears on the dvd jacket. Majestically spread in it's glider form! This was actually pretty easy. I used a light black material, cut it in the shape I wanted, and then added pipe cleaners...Yes, PIPE CLEANERS as the "veins". It looks pretty cool if the pipe cleaners are just a bit darker than the fabric. Glue them in place and there you have it.
Had to get back far enough on the pics to see the entire cape, so the detail is a bit hard to see. Sorry.](userimages/customs/11500/11399-1.jpg) Batman Begins custom cape Batman Beginsby ruredi2rocThis is merely a cape creation for my Batman Begins "Batman" figure. I wanted to make his cape as it appears on the dvd jacket. Majestical...1 comments | ![[Batman] This is a batman figure from the movie master figure line from mattel. All I did was made a custom cape based on the movie.](userimages/customs/11000/10523-1.jpg) Batman Batman Beginsby hung17688This is a batman figure from the movie master figure line from mattel. All I did was made a custom cape based on the movie....1 comments |
![[Scarecrow] Easiest custom ever!
Just popped Movie Master Scarecrow head onto a Clark Kent body and he look uber cool. So cool, so easy, and so effective](userimages/customs/10500/10277-1.jpg) Scarecrow Batman Beginsby ShinobitronEasiest custom ever!
Just popped Movie Master Scarecrow head onto a Clark Kent body and he look uber cool. So cool, so easy, and so effective...4 comments | ![[Battle Damaged Batmobile/tumbler] just added battle damaged details with sivler paint and made the bullet and scratch marks with a boxcuter and exacto knife to make differnt sized marks if you want more info go check out my youtube vid called Battle Dameged Batman Begins Batmobile/Tumbler](userimages/customs/9500/9204-1.jpg) Battle Damaged Batmobile/tumbler Batman Beginsby Spartan2889just added battle damaged details with sivler paint and made the bullet and scratch marks with a boxcuter and exacto knife to make differnt sized mark...2 comments |
![[Vigilante Bruce Wayne] This might be one of my favorite customs, because it's simple and just plain different. In "Batman Begins" right before Bruce picks the bat symbol he visited Jim Gordon at his office, wearing only the proective suit and a mask. LOL So that is where I got Vigilante Bruce from LOL.
The base figure is a Movie Masters Batman Begins Figure with bat removed & straps added. The head is from a Movie Daredevil with the horns sanded down and painted black. I painted the eyes, but for me they just didn't look right, so I kept them simple white.](userimages/customs/9500/9020-1.jpg) Vigilante Bruce Wayne | ![[Jonathan Crane - Scarecrow] I used a modified Clark Kent head to make an unmasked Scarecrow.](userimages/customs/9000/8707-1.jpg) Jonathan Crane - Scarecrow |
![[Batman Begins] After many attempts, I finally lengthened his legs to a normal height. After breaking parts, loosing parts, and breaking more parts, I decided to take ball joints, sculpt them onto his legs, and fix them to his pelvis. After making a cape, he was completed.](userimages/customs/9000/8706-1.jpg) Batman Begins Batman Beginsby BalisconAfter many attempts, I finally lengthened his legs to a normal height. After breaking parts, loosing parts, and breaking more parts, I decided to tak...4 comments | ![[Dr. Crane / Scarecrow] I use one old jean to make the clthes of scarecrow on asgardian,sculp the botts and added black heart head,. And sculpt a remobable scarecrow mask, enjoy and sorry my english](userimages/customs/8500/8446-1.jpg) Dr. Crane / Scarecrow Batman Beginsby elewockI use one old jean to make the clthes of scarecrow on asgardian,sculp the botts and added black heart head,. And sculpt a remobable scarecrow mask, e...0 comments |
![[Takara Bruce Wayne] I didn´t want the Bruce head to just sit there so I searched for some suits and bodys on evilbay and I know, I should give it a paintjob but I allready like it that way.](userimages/customs/8000/7580-1.jpg) Takara Bruce Wayne Batman Beginsby VincentShawI didn´t want the Bruce head to just sit there so I searched for some suits and bodys on evilbay and I know, I should give it a paintjob but I a...1 comments | ![[Thrill Killer Batman] Just a repaint with a new belt sculpted out of craft porcelain. I also tried using some craft porcelain to extend his gloves up the length of his arms.](userimages/customs/7000/6760-1.jpg) Thrill Killer Batman Batman Beginsby billabong7329Just a repaint with a new belt sculpted out of craft porcelain. I also tried using some craft porcelain to extend his gloves up the length of his arms...0 comments |
![[The Batman] This is a re-paint of the Batman Begins Attack Net figure. The car is also a re-paint of the animated series cat.](userimages/customs/6500/6472-1.jpg) The Batman | ![[Batman - Batman Begins] DCSH Batman Series ...4? Chest arms and legs armor sculpted in Apoxie Sculpt. Cape cut to shape of the Action Cape Batman..... Sorta. It looks nice and it was a long awaited accomplishment.](userimages/customs/6000/5840-1.jpg) Batman - Batman Begins Batman Beginsby GeekSummitDCSH Batman Series ...4? Chest arms and legs armor sculpted in Apoxie Sculpt. Cape cut to shape of the Action Cape Batman..... Sorta. It looks nice an...0 comments |
![[Batman Begins] Using a variation on the recipe for a Batman Begins figure by V.I.N.Cent I made my own Batman Begins figure, not movie accurate but it'll do for me :)
Base: XMC Ninja Wolverine (Modded)
Head, Cape, Gauntlets, Belt: Batman Begins Total Control Batman
Forearms/Hands: XMC Archangel
Lower Legs: XMC Stealth Wolverine](userimages/customs/4500/4078-1.jpg) Batman Begins Batman Beginsby DDAUsing a variation on the recipe for a Batman Begins figure by V.I.N.Cent I made my own Batman Begins figure, not movie accurate but it'll do for me :)...5 comments | ![[Batman Begins Batman] Ninja Wolverine body with Batman Begins Fighting batman figure head & gauntlets & gambit arms resculpted.](userimages/customs/4000/3933-1.jpg) Batman Begins Batman |
|