![[Warehouse Room and Snake Eyes] HEY guys im back with better customs than before and i missed the realm i have been keeping an eye on the new customs coming in and they are all awesome. Any ways im here today with a diorama this is the first time i ever made one and i think it turned out pretty good. the whole thing is a cardboard box with poster board for a smooth interior and some dry brushing to give it some ware the pipe is a straw with a grey dry brush and the hole in the wall is just punched through with the bricks showing and the bricks are styrofoam im still thinking of what else to add if you think of something that would be great. the table is an ipod case with foam legs. snake eyes is a neo viper with snake eyes parts so tell me wat you think any questions or suggestions let me know. SEE YA GUYS ITS GOOD TO BE BACK!!](userimages/customs/51000/50814-1.jpg) Warehouse Room and Snake Eyes G.I. Joeby devilclownhaha02HEY guys im back with better customs than before and i missed the realm i have been keeping an eye on the new customs coming in and they are all awes...2 comments | ![[Snake-Eyes] Simple custom, added the visor and reworked the harness.](userimages/customs/51000/50704-1.jpg) Snake-Eyes |
![[Roadblock] Another one of my favorite characters from the cartoon series, Roadblock in 6 inch scale](userimages/customs/51000/50703-1.jpg) Roadblock | ![[Steampunk Airship Pilot Destro] Pilot to the massive 1:18 scale airship Destro!!](userimages/customs/51000/50656-1.jpg) Steampunk Airship Pilot Destro |
![[Steampunk Major Bludd] The steam cobra's would not be complete with out Major bludd!!!](userimages/customs/51000/50655-1.jpg) Steampunk Major Bludd | ![[Steampunk Storm Shadow] Steam shadow! ninja assassin of cobra!!](userimages/customs/51000/50605-1.jpg) Steampunk Storm Shadow |
![[Steampunk Dr Mindbender] even more of the steam cobra project today i give you dr mindbender!!](userimages/customs/51000/50604-1.jpg) Steampunk Dr Mindbender | ![[Shipwreck and Polly] I realize GI Joe started in the 60s but I would like to start by saying, for me, GI Joe means the cartoon from the 80s. Loved it even though no one ever really was hurt. My favorite character was Shipwreck, always had a comeback, a smart aleck.
Used a movie Punisher for the base. Ground away some of the hair and sculpted in the cap and shirt. Swapped out the hands for Madman's gloved hands. Tamiya and Testors for the paints. And of course what would Shipwreck be without Polly. I have half a dozen Redwings laying around with not a lot of options for using them. Cut off most of the beak and sculpted a parrot beak. Same paints, both sealed with Dullcote.
Anyway, let me know what you think.](userimages/customs/51000/50598-1.jpg) Shipwreck and Polly G.I. Joeby YBulltoisI realize GI Joe started in the 60s but I would like to start by saying, for me, GI Joe means the cartoon from the 80s. Loved it even though no one ev...3 comments |
![[Steampunk Baroness] Again more of the cobra steampunks This time The baroness herself!](userimages/customs/51000/50565-1.jpg) Steampunk Baroness | ![[Steampunk Fire Fly] This is 1 of 7 of the steampunk cobras Firefly being a bombs expert in steampunk genre would be dealing with black powder and phosphors soooo that is why he is missing some limbs and such this is my genre bending of 80s gi joe with steampunk!](userimages/customs/51000/50564-1.jpg) Steampunk Fire Fly G.I. Joeby RatfinkThis is 1 of 7 of the steampunk cobras Firefly being a bombs expert in steampunk genre would be dealing with black powder and phosphors soooo that i...4 comments |
![[Snake Eyes V2: 1.5] This is the same Figure as my original NECA style Snake Eyes but with an update. I was never really happy with how the lower legs and boots fit or the paint job. The boots were too big giving him a bit of a bugs bunny look (!) and the legs needed a bit of work to straighten them up and lengthen them. I replaced Guile's boots with those from a ML Ultimate Captain America and tailored the legs to fit. Re-painted with less dry-brushing and more subtle colour blending and voila: Snake Eyes 1.5 :0D
Thanks for looking!](userimages/customs/51000/50543-1.jpg) Snake Eyes V2: 1.5 G.I. Joeby JaimanThis is the same Figure as my original NECA style Snake Eyes but with an update. I was never really happy with how the lower legs and boots fit or the...18 comments | ![[Snake Eyes : Tim Bradstreet] Second figure for the day is arguably the most popular Joe ever, SnakeEyes! His design and form followed the artwork of the great Tim Bradstreet. He draws him quite lean (the anti-Olivetti :D) and always more "commando" than "ninja".
This figure was made from a Hasbro Punisher with a Moonknight head. His visor, harness (straps, buckles ect.), vest, glove-tops, Arashikage logo and kneepads are sculpted details. All the pouches, holster and scabbard were fodder parts. He comes with a removable pistol and katana, plus additional guns. Usual paintjob followed.
Hope you like him guys. God bless!](userimages/customs/50500/50452-1.jpg) Snake Eyes : Tim Bradstreet G.I. Joeby loosecollectorSecond figure for the day is arguably the most popular Joe ever, SnakeEyes! His design and form followed the artwork of the great Tim Bradstreet. He d...33 comments |
![[Serpentor] Used the DCU Copperhead head, and chest piece, some other random parts and paint. Thanks for checkin' him out.](userimages/customs/50500/50305-1.jpg) Serpentor G.I. Joeby boskoesUsed the DCU Copperhead head, and chest piece, some other random parts and paint. Thanks for checkin' him out....5 comments | ![[GI Joe the Baroness] Been a while but got more bratz coming. This was one of those why didn't I think of doing this before figures. The glasses, pants, & belt were from my scrap bin. The rest of her was repainted and detailed with puffy paint and the cobra symbol hand painted on. Finally I added vinyl pieces for her boots & holster.](userimages/customs/50500/50304-1.jpg) GI Joe the Baroness G.I. Joeby RogueBeen a while but got more bratz coming. This was one of those why didn't I think of doing this before figures. The glasses, pants, & belt were fro...20 comments |
![[Woody and Buzz Lightyear G.I. Joes] Hi!
This is my first custom I submitted here. I basically only switched parts and repainted. I used Roadblock (V6) for Buzz, with Gen. Hawk's head. For Woody I used the torso of Wild Bill (V2), the head of Scoop and the legs of another Rodablock figure.
Hope you like it!](userimages/customs/50500/50267-1.jpg) Woody and Buzz Lightyear G.I. Joes G.I. Joeby RobertDeNitroHi!
This is my first custom I submitted here. I basically only switched parts and repainted. I used Roadblock (V6) for Buzz, with Gen. Hawk's head. Fo...6 comments | ![[Steampunk Cobras] This is a group shot of the whole steam cobras project i will be posted the rest within the next few days
from Left to right
Mindbender-Firefly storm shadow -commander - bludd-destro -Baroness](userimages/customs/50000/49992-1.jpg) Steampunk Cobras G.I. Joeby RatfinkThis is a group shot of the whole steam cobras project i will be posted the rest within the next few days
from Left to right
Mindbender-Firefly sto...5 comments |
![[1/6 Custom "SOAP" Mctavish.] This is one of the characters for my upcoming stop motion project this coming summer 2013.
This project will include "GHOST" & "CAPTAIN PRICE"
This one is my own take on the character "Soap" in the cod series.
I gave him a custom sleeve tattoo to match his hardcore mohawk. The rest of his gear was hunted on ebay. Took me a while to figure it out how my characters would like, but there goes one hope you guys like it.](userimages/customs/50000/49990-1.jpg) 1/6 Custom "SOAP" Mctavish. G.I. Joeby o0ovco0oThis is one of the characters for my upcoming stop motion project this coming summer 2013.
This project will include "GHOST" & "CAP...4 comments | ![[Low-Light] Hey guys,
I'm proud to bring you one of my favorite ML Style Gi Joe customs, Low-Light.
I tried to stay as close to the original as possible.
The base figure was X-Men Classics Magneto heavily sculpted.
The head was a ML 2 pack Clint Barton also modded with goggles and knit cap.
The paint was Model Master acrylic.
Thanks For looking.](userimages/customs/50000/49863-1.jpg) Low-Light G.I. Joeby Wanderer-XHey guys,
I'm proud to bring you one of my favorite ML Style Gi Joe customs, Low-Light.
I tried to stay as close to the original as possible.
The base...7 comments |
![[Clockwork BAT] Had a lot of fun with this one. I've had this idea in my head for a LONG time, I just now got around to getting a BAT to try it out. I bought a bag of old watch parts a while back and have been sitting on them forever, I was going to use them for a completely different project but I've wanted to do a clockwork project for a while. I dremeled out the plastic junk in his torso, then replaced it all with a random assortment of gears and cogs. I added some to his elbow joints and to the flamethrower, but I didn't want to add TOO many so it got too busy. Paint job was pretty simple, just a bit of detail work on the head. Have two heads, the battle damaged one and an alt 'whole' one that is a cast from a friend.](userimages/customs/50000/49830-1.jpg) Clockwork BAT G.I. Joeby Zebus_0Had a lot of fun with this one. I've had this idea in my head for a LONG time, I just now got around to getting a BAT to try it out. I bought a bag of...3 comments | ![[Agent Helix] Hey guys,
Up next is my custom commission of Agent Helix from G. I. Joe.
It's just a Maria Hill base that's been sculpted over with Apoxy Sculpt.
Her blade is also a scratch build. She's hand painted with Model Master Acrylics.
Thanks for looking.](userimages/customs/50000/49813-1.jpg) Agent Helix G.I. Joeby Wanderer-XHey guys,
Up next is my custom commission of Agent Helix from G. I. Joe.
It's just a Maria Hill base that's been sculpted over with Apoxy Sculpt.
H...9 comments |
![[Cobra Hunter Mutant] Another Batman TDKR Quick-Tek launcher box was used for this Cobra Hunter Mutant. The box was weathered up and I printed out some nifty caution stripes/danger signs to detail them with. Cobra Hunter was made from a Zombie Viper body, Mum-rah hands, Luke Skywalker vs Clone Emperor lower arms, Storm Shadow lower legs, Mortal Kombat Reptile feet, ROC Storm Shadow sash, Retaliation Zartan hood, and a head from another Star Wars figure.](userimages/customs/50000/49810-1.jpg) Cobra Hunter Mutant G.I. Joeby Jin SaotomeAnother Batman TDKR Quick-Tek launcher box was used for this Cobra Hunter Mutant. The box was weathered up and I printed out some nifty caution stripe...3 comments | ![[Stormshadow] Here is my latest G.I. Joe custom of Stormshadow. This is basically a Bucky cap with a ton of sculpting. I think the head was a Shield grunt again heavily sculpted. The sword and arrow pack pegs in to his back. Swords have had their hilts re-sculpted for better fit. Bucky's tiny feet where re-sculpted to give better stability and get that ninja tabi look. Thanks again for looking.](userimages/customs/50000/49772-1.jpg) Stormshadow G.I. Joeby Wanderer-XHere is my latest G.I. Joe custom of Stormshadow. This is basically a Bucky cap with a ton of sculpting. I think the head was a Shield grunt again hea...15 comments |
![[Green Arrow V.1] Green Arrow is my favorite DC anti/hero so I had to enter one version, since I have a few more on going projects. Any how, I used a Retaliation Zartan as my base, removed the head and replaced it with some head I cut off of a broken figure my wife gave me. I had to drill a hole in the neck to fit the ball and sculpt the goatee paint it the hair and the eye mask. DG Storm Shadow hood, bow, and chest strap, Renegades Duke vest, Zartan quiver. I used Model Master paint for the new paint job, two shades of green, green zinc and another green. It was a little rushed, but I'm happy with version 1. and I hope you are too.](userimages/customs/50000/49721-1.jpg) Green Arrow V.1 G.I. Joeby KaMillion KustomsGreen Arrow is my favorite DC anti/hero so I had to enter one version, since I have a few more on going projects. Any how, I used a Retaliation Zartan...2 comments | ![[Bane] I used the Retaliation RoadBlock as my base because of the size compared to other Joe figures. First I popped the Rocks head off and replaced it with a Bane head from the movie figures, the ones with almost no articulation, also his gloved hand and dremeled a hole through it to fit on RoadBlocks arm. I picked the right arm to hide the hand replacement. I gave it a new paint job using Model Masters, a couple coats of skin tone and a wash with a green to appear like venom, also I used a flat black and dry brushed the blue for his pants. The head was the hardest, I sculpted over the face made the eyes and repainted. I added a venom tank to his back painted it green and dry brushed it with silver, I then used wire for hoses to his head and right arm. The last thing I did was add the cover over his neck to appear more like a mask and the computer thing on his right arm glove. Hope you like.](userimages/customs/50000/49691-1.jpg) Bane G.I. Joeby KaMillion KustomsI used the Retaliation RoadBlock as my base because of the size compared to other Joe figures. First I popped the Rocks head off and replaced it with ...1 comments |
![[Centaur Wolf] I took a GI Joe timber and bashed on SHS Colossus added a lot of sculpt a viola.](userimages/customs/50000/49677-1.jpg) Centaur Wolf | ![[1/6 Custom Tattoos Version 3] Custom sleeve tattoo for 1/6 figures, its a custom vinyl my friend makes that I modify to fit a 1/6 figures. You can try sticker tattoo but way too messy special if u have a pet.
Btw this is my own take of "soap" Mctavish I think he shoulda had a sleeve tattoo to match his mohawk.](userimages/customs/50000/49629-1.jpg) 1/6 Custom Tattoos Version 3 G.I. Joeby o0ovco0oCustom sleeve tattoo for 1/6 figures, its a custom vinyl my friend makes that I modify to fit a 1/6 figures. You can try sticker tattoo but way too me...1 comments |
![[1/6 Custom Tattoos Version 2] 1/6 Custom sleeve tattoos, its custom vinyls my friend makes and i modify it.I tried the sticker tattoo but its too sticky and once you touch it it sticks on to your skin.](userimages/customs/50000/49628-1.jpg) 1/6 Custom Tattoos Version 2 G.I. Joeby o0ovco0o1/6 Custom sleeve tattoos, its custom vinyls my friend makes and i modify it.I tried the sticker tattoo but its too sticky and once you touch it it st...0 comments | ![[Custom Tattoos] A cheap way to make simple figures look bad a$$](userimages/customs/50000/49544-1.jpg) Custom Tattoos |
![[Ace] Different Marvel and halo mega blok figures](userimages/customs/50000/49539-1.jpg) Ace | ![[Tele-Viper] He's made up from different marvel an halo mega blok figures](userimages/customs/50000/49538-1.jpg) Tele-Viper |
|