![[Nightwing (John Blake)] This is one of those customs that everybody did all around the same time and I was left in the dust well I'm all caught up now! I recently purchased a John Blake and TDKR Batman for quite cheap and thought I'd use my old movie Batman for a movie Nightwing. I only had one Det. Blake figure and didn't want to mess up his face so I thought I'd rework Batman's a little. I've seen people just take off the ears but I like the eye mask more so I cut off the ears and painted him a flesh tone color. Then I sculpted his hair and painted that. I decided to work parts of Batman's mask into Nightwing's when I painted it so it'd look cleaner. Then I Gave the rest of the figure a base coat of black and got out my testors paints and used Jinzin's Nightwing as a reference. The sticks are toothpicks with green stuff sculpted over and painted.](userimages/customs/50500/50290-1.jpg) Nightwing (John Blake) | ![[Iron Spider] The Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at least give it a decent paint job. I gave him a darker red and gold done in paint pen. The arms were made out of layers of wire wrapped around each other and the ends of the original arms were put into place.](userimages/customs/50500/50016-1.jpg) Iron Spider Spider-Manby BluehawKThe Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at...2 comments |
![[Carnage] Had a spare Fiercest Foes Spider-Man and thought I should make a mini carnage. So I painted him all red then all black then dry brushed red. I did the veins in Sharpie and did his face with a toothpick. The tendrils were wire covered in hot glue and painted. The axe was spare green stuff from another project I randomly sculpted onto a toothpick and painted it for this project.](userimages/customs/50000/49985-1.jpg) Carnage Spider-Manby BluehawKHad a spare Fiercest Foes Spider-Man and thought I should make a mini carnage. So I painted him all red then all black then dry brushed red. I did the...2 comments | ![[Terry Mcginnis] After I put the Batman head on the Batman body, Terry's head was without a body so thought I should give him one. I got a WWE Miz figure cheap at Walmart and started from there. I had to do a leg transplant first so I swapped waists with a spider-man figure but it was super scrawny so I had to sculpt from the waist down. But I switched the legs at the shins. I'm basing this off of Arez's Terry so I painted him black and his arms red. Then I sculpted the jacket and repainted it all red.](userimages/customs/50000/49911-1.jpg) Terry Mcginnis Batman Beyondby BluehawKAfter I put the Batman head on the Batman body, Terry's head was without a body so thought I should give him one. I got a WWE Miz figure cheap at Walm...0 comments |
![[Batman beyond] Woa, what? a figure outside of Spider-Man? That's right! I got this guy a while ago for pretty cheap and recently felt the urge to give him a batman head because I had the one with the Terry head. So I grabbed a spare Batman head and did the usual magnet thing and painted his head pretty simple but effective. I also carved some wings out of cardboard and painted them and attached them with the invisible rubber bands he came with.](userimages/customs/50000/49699-1.jpg) Batman beyond Batman Beyondby BluehawKWoa, what? a figure outside of Spider-Man? That's right! I got this guy a while ago for pretty cheap and recently felt the urge to give him a batman h...2 comments | ![[Peter Parker] I've been really wanting a Parker figure and I thought Longshot would be a great base and I found one for really cheap!! So I sanded off his pouches and took his hair off then sculpted some brand new hair and another finger cuz I had to shave it off. Then I gave him a full repaint and boom! Andrew Garfield inspired Peter Parker!](userimages/customs/50000/49698-1.jpg) Peter Parker Spider-Manby BluehawKI've been really wanting a Parker figure and I thought Longshot would be a great base and I found one for really cheap!! So I sanded off his pouches a...0 comments |
![[Marvel Select Green Goblin] This Goblin is not the best and there were some aspects of it that were necessary to change. For one thing the pumpkin bombs were attached to his hands so I twisted them off and put magnets inside them and bent a paper clip in a circle and super glued them to his hands. Another thing was the glider was attached to the smoke stand luckily that broke off cleanly and easily I just had to smooth that part out and it was good. After that I gave him a small repaint giving him pupils, a more defined green, and a darker glider color and also re-did the purple.](userimages/customs/49500/49489-1.jpg) Marvel Select Green Goblin Spider-Manby BluehawKThis Goblin is not the best and there were some aspects of it that were necessary to change. For one thing the pumpkin bombs were attached to his hand...4 comments | ![[Spider-Carnage (90's Repaint)] This is the Spider-Carnage base I used for my amazing Spider-Carnage and New Ultimate Carnage so he was without his head and left fingers. For the fingers I just used floss picks as usual. The head pictured is the one from the Amazing Spider-Carnage just because it looks better but the one I currently have on him is from a fodder Spider-Man with sculpted eyes and jaw attached with magnets (not pictured). After that I game him a full repaint of drybrushed red and blue where the black was and veins painted red with a toothpick.](userimages/customs/49500/49488-1.jpg) Spider-Carnage (90's Repaint) Spider-Manby BluehawKThis is the Spider-Carnage base I used for my amazing Spider-Carnage and New Ultimate Carnage so he was without his head and left fingers. For the fin...0 comments |
![[Ben Reilly 2.5] Just a simple repaint of my Ben Reilly 2.0. I didn't really like the black because well he's red and blue not red and black and he looks better in blue. I also repainted his eyes white because I didn't do such a good time on those the first time.](userimages/customs/49500/49456-1.jpg) Ben Reilly 2.5 Spider-Manby BluehawKJust a simple repaint of my Ben Reilly 2.0. I didn't really like the black because well he's red and blue not red and black and he looks better in blu...4 comments | ![[New Ultimate Carnage] This was done out of boredom really I had recently seen the episode of the ultimate spiderman show with carnage and thought he looked pretty sweet so I thought I'd try to model a figure after him. So I painted my former Scarlet Spider made from an Iron Spider him all black and drybrushed him red. Then I cut off his fingers and the fingers on one hand of the Spider-Carnage and glued those fingers to his hand. After that catastrophe I thought I'd use floss pick ends for the other hand. After that dried I painted his hands to his elbow and his foot to his knee all black. Then I took a tooth pick and outlined veins all around his body connecting to his back. After all that I painted the eyes white and painted on the mouth this time.](userimages/customs/49500/49366-1.jpg) New Ultimate Carnage Spider-Manby BluehawKThis was done out of boredom really I had recently seen the episode of the ultimate spiderman show with carnage and thought he looked pretty sweet so ...4 comments |
![[Hobgoblin] I got this figure when it came out a looong time ago and I was like 3 or so when it I got out and the leg broke and I lost the glider and I already made a glider so I thought I'd do a leg transplant for him. I used a Spider-Man classics black Spider-Man leg and dremeled the mid thigh on both figures and super glued the leg in place and used green stuff for reinforcement and sculpted the boots. Then I gave him a full repaint and voila!](userimages/customs/49500/49325-1.jpg) Hobgoblin Spider-Manby BluehawKI got this figure when it came out a looong time ago and I was like 3 or so when it I got out and the leg broke and I lost the glider and I already ma...0 comments | ![[Movie Spider-Man Classic Colors 2.0] Another figure from my ebay lot was the super poseable I believe Spider-Man Trilogy Spider-Man and I thought well I only need one Spider-Man with the black blue colors and I like the classic blue better so I took some blue citadel and painted all the blue black parts and used a tooth pick to fix where I colored outside of.](userimages/customs/49500/49223-1.jpg) Movie Spider-Man Classic Colors 2.0 Spider-Manby BluehawKAnother figure from my ebay lot was the super poseable I believe Spider-Man Trilogy Spider-Man and I thought well I only need one Spider-Man with the ...2 comments |
![[Scarlet Spider 2.0] One of the figures I got was a Spider-Man Classics black spider-man and I thought oh great I already have a black suit Spider-Man like this but better articulated so I can use this one for a custom. After quite a bit of thought I decided on a classic Scarlet Spider. So I painted him all red the his chest blue. After that dried I painted his eyes and symbol with a tooth pick. Then I used some green stuff to sculpt his web shooters, belt, anklets, and hood For the belt and web shooters I used the body of the tooth pick to shape the pockets and stuff. While it was drying I painted it with a thin brush and used a tooth pick to get parts I missed and clean up outside the lines.](userimages/customs/49500/49222-1.jpg) Scarlet Spider 2.0 Spider-Manby BluehawKOne of the figures I got was a Spider-Man Classics black spider-man and I thought oh great I already have a black suit Spider-Man like this but better...4 comments | ![[Symbiote Spider-Man 2.0] This was my Big Time Spider-Man but since I got the Spider-Man lot of figures I figured I should do the black suit Spidey that I've wanted to do for a while. So I painted him all black and used a tooth pick to do the spider and hand square things.](userimages/customs/49500/49208-1.jpg) Symbiote Spider-Man 2.0 Spider-Manby BluehawKThis was my Big Time Spider-Man but since I got the Spider-Man lot of figures I figured I should do the black suit Spidey that I've wanted to do for a...6 comments |
![[The Amazing Spider-Carnage] I know I know... another Spider-Carnage! But I got a figure lot of about 5 great figures for 30 bucks and I got 2 Spider-Carnages a Marvel Select Spider-Man and a couple other really good figures. I was wondering what I should do with this guy and thought hey lets do an Amazing Spider-Man Carnage concept so I popped the head off one and drilled a hole in his head and another hole in the base figure's neck and put magnets in them. I also put a magnet in the Spider-Man head. On the thwipping hands I cut off the fingers and super glued floss picks. After that I painted all the blue parts black and made the black stripes red. So I can have him as either carnage or dark Spider-Man!](userimages/customs/49500/49184-1.jpg) The Amazing Spider-Carnage Spider-Manby BluehawKI know I know... another Spider-Carnage! But I got a figure lot of about 5 great figures for 30 bucks and I got 2 Spider-Carnages a Marvel Select Spid...6 comments | ![[Mac Gargan Venom] I've this done a couple of times and thought it was my turn so I got a gargan venom and painted him all flat black. I took the tail from my anti venom figure because he wasn't going to need it and I painted it black leaving the white design on it. Then the part that took forever! I took a toothpick and outlined the legs on the spider and when it dried I painted them in.](userimages/customs/48500/48297-1.jpg) Mac Gargan Venom Spider-Manby BluehawKI've this done a couple of times and thought it was my turn so I got a gargan venom and painted him all flat black. I took the tail from my anti venom...2 comments |
![[Spider-Man 3 Symbiote Spider-Man V.3] I just thought I ought to paint the webbing on him because I thought it'd look better. I painted the webbing with a toothpick and in grey to make the symbol stand out. Hope you guys like it.](userimages/customs/48500/48269-1.jpg) Spider-Man 3 Symbiote Spider-Man V.3 Spider-Man - Movieby BluehawKI just thought I ought to paint the webbing on him because I thought it'd look better. I painted the webbing with a toothpick and in grey to make the ...4 comments | ![[Spider-Man 3 Symbiote Spider-Man V.2] So I was looking at my black suited spider-man and didn't really like the job I had done and remembered someone's custom where they just did the symbol and I liked the way that looked so I thought I'd try it. I painted him all black and painted his eyes and symbol white with a tooth pick.](userimages/customs/48500/48255-1.jpg) Spider-Man 3 Symbiote Spider-Man V.2 Spider-Man - Movieby BluehawKSo I was looking at my black suited spider-man and didn't really like the job I had done and remembered someone's custom where they just did the symbo...4 comments |
![[Toxin 2.0] After I finished my 2nd Spider-Carnage I had no idea what to do with my old one but then I thought I should make a new Toxin with better articulation. This figure already had a jaw and the paint job was close so I just did some touch ups on the paint to make it look like Toxin and gave him an alternate jawless head.](userimages/customs/48000/47874-1.jpg) Toxin 2.0 Toxinby BluehawKAfter I finished my 2nd Spider-Carnage I had no idea what to do with my old one but then I thought I should make a new Toxin with better articulation....0 comments | ![[Spider-Carnage Repaint] *Updated 4/26*
I got 2 Spider-Carnages in the lot I got on ebay so I thought I'd repaint one. This was just a simple dry brush on the torso and head andI tooth picked the veins](userimages/customs/48000/47726-1.jpg) Spider-Carnage Repaint Spider-Manby BluehawK*Updated 4/26*
I got 2 Spider-Carnages in the lot I got on ebay so I thought I'd repaint one. This was just a simple dry brush on the torso and head a...0 comments |
![[Spider-Carnage 2.5] I recently purchased the actual spider carnage figure mainly because I wanted his head because I still didn't like the way I did it. So what should've been a simple head swap, took me 5 fricken hours to do!!! I had to find a good way to switch the heads first. I decided to pop off his head and cut off the neck part of it and hollow out the inside and put a magnet in it and cut off the ball part of the base figures neck and put a magnet on it.Then I had to super glue, paint, and sculpt some stuff which took forever to wait for everything to dry and what was maddnening was that after everything had dried, his neck was waaaay to long so I had to repeat what I had done after cutting his neck and it was still too long so I had to do it one more time and thankfully it looked good. Also after I had done all that, I put claws on his other hand too.](userimages/customs/48000/47725-1.jpg) Spider-Carnage 2.5 Spider-Manby BluehawKI recently purchased the actual spider carnage figure mainly because I wanted his head because I still didn't like the way I did it. So what should've...4 comments | ![[Venom] I just did what most people have done, just a basic touch up. I painted him all black to make it solid then I filled the hole in his back and filled in his eyes.](userimages/customs/48000/47691-1.jpg) Venom Spider-Manby BluehawKI just did what most people have done, just a basic touch up. I painted him all black to make it solid then I filled the hole in his back and filled i...2 comments |
![[Venom V.2] I got another Gargan Venom so I thought I'd do a blue version because I thought it would look cool. I did a base coat of black and dry brushed dark blue on. The symbol was a pain, I did like 3 different ones before I was mildly satisfied with a Flash Thompson type logo. I also ripped out his tongue and put in magnets so it's now removable.](userimages/customs/48000/47689-1.jpg) Venom V.2 Venomby BluehawKI got another Gargan Venom so I thought I'd do a blue version because I thought it would look cool. I did a base coat of black and dry brushed dark bl...2 comments | ![[Spider-Carnage 2.0] So I just got my hands on the "green stuff" and thought I should make another spider carnage with it because I wasn't too happy with the jaw on the original.
*Update*
I re-sculpted the jaw because I wasn't happy with it and also re did the eyes because I thought they needed to be sculpted finer and I clawed his left hand by cutting off his fingers and super gluing floss pick ends on the tips and painting them.](userimages/customs/47500/47445-1.jpg) Spider-Carnage 2.0 Spider-Manby BluehawKSo I just got my hands on the "green stuff" and thought I should make another spider carnage with it because I wasn't too happy with the jaw...6 comments |
![[Negative Zone Spider-Man] Base coat gray then dry brushed black.
So I had this figure and did not know what to do with it and thought well I don't have a negative zone suit, let's see what it looks like on him.](userimages/customs/47500/47404-1.jpg) Negative Zone Spider-Man Spider-Manby BluehawKBase coat gray then dry brushed black.
So I had this figure and did not know what to do with it and thought well I don't have a negative zone suit, l...0 comments | ![[Symbiote Spiderman] So I was looking at my Ben Reilly and thought to my self, I already have one and that one is better, why not try a black Spider-Man. I also already have one but its good practice none the less. I'm still not happy with how his symbol turned out though, most of the time I put in this figure was on the symbol and it still isn't right so I'll have to re-do that.](userimages/customs/47500/47389-1.jpg) Symbiote Spiderman Spider-Manby BluehawKSo I was looking at my Ben Reilly and thought to my self, I already have one and that one is better, why not try a black Spider-Man. I also already ha...2 comments |
![[Spider-Venom] What if? What if the venom Symbiote had taken over Ben Reilly instead of the Carnage Symbiote?
Base coat glossy black with dark blue over that. Then red over the chest and head. Webbing was dry brushed red and the symbol and other details paint penned. I also took out the tongue.
So I got the idea to do this from MysticHeroes's Spider Carnage. I thought it was amazing and I had an extra venom laying around so I thought I'd give it a try.](userimages/customs/47500/47300-1.jpg) Spider-Venom Spider-Manby BluehawKWhat if? What if the venom Symbiote had taken over Ben Reilly instead of the Carnage Symbiote?
Base coat glossy black with dark blue over that. Then ...0 comments | ![[Mcfarlane Spider-Man] So like 5 minutes after I finished my classic Spider-Man I thought he'd look better with those big 'ol McFarlane eyes, those were always my favorite. So I grabbed some of my clay and just did 2 large patches on his eyes and sculpted the shape with a toothpick and sharpied the black outline.](userimages/customs/47500/47163-1.jpg) Mcfarlane Spider-Man Spider-Manby BluehawKSo like 5 minutes after I finished my classic Spider-Man I thought he'd look better with those big 'ol McFarlane eyes, those were always my favorite. ...4 comments |
![[Classic Spider-Man] 3 or so coats of "dark blue" shade acrylic after I gave him a quick wipe of acetone to take off the paint I originally put on him.
So I was looking at this figure and at the time it was red and black which I did like but I thought it would be cooler to make a classic spiderman so I did.](userimages/customs/47500/47161-1.jpg) Classic Spider-Man Spider-Manby BluehawK3 or so coats of "dark blue" shade acrylic after I gave him a quick wipe of acetone to take off the paint I originally put on him.
So I was...2 comments | ![[Carnage V2] This is my other carnage that I repainted and this one is red over black instead of the other way around and I gotta say I like the other one better but this one is still better than the original.
Base coat red with black detailing done in sharpie](userimages/customs/47000/46542-1.jpg) Carnage V2 Spider-Manby BluehawKThis is my other carnage that I repainted and this one is red over black instead of the other way around and I gotta say I like the other one better b...3 comments |
|