![[Grizzly] Just finished my Grizzly from the X-Force and of course I wanted to share with the realm! I started with Marvel Legends Pile Driver as a base and used Bishop's head with molded hair and some added accessories. Thanks for looking guys!](userimages/customs/49000/48545-1.jpg) Grizzly Marvelby TNT CUSTOMZJust finished my Grizzly from the X-Force and of course I wanted to share with the realm! I started with Marvel Legends Pile Driver as a base and use...7 comments | ![[Gamora] Hi Guys! For my version of Gamora from Guardians of the Galaxy I started with Madames Hydra for a base, and added a DC Universe Raven head. To finish her off I added some molding and random parts that I had in my fodder. Feel free to ask any questions or leave your comments, I always appreciate the input from the Realm!](userimages/customs/48500/48496-1.jpg) Gamora Marvelby TNT CUSTOMZHi Guys! For my version of Gamora from Guardians of the Galaxy I started with Madames Hydra for a base, and added a DC Universe Raven head. To finis...24 comments |
![[Cannonball] Hey again Realm! Had to share Cannonball especially since I'm so proud of his base, glue guns are so awesome!! Worked really well for the smoke flames. I used two different DC figures for the base, a little molding, some paint and hopefully you guys agree he's a decent looking Cannonball! Thanks for looking guys!](userimages/customs/48500/48166-1.jpg) Cannonball Marvelby TNT CUSTOMZHey again Realm! Had to share Cannonball especially since I'm so proud of his base, glue guns are so awesome!! Worked really well for the smoke flame...7 comments | ![[A-Bomb] Hi Realmers! I thought I'd share my A-Bomb with you. As you can probably tell I used Abomination as a base which has been done many times before me, but hopefully I put a little of my own touch on it as well. All the extras are molding, except for the chest I used a hot tool for making the design. Hope you enjoy, thanks for looking and for always being so supportive of the work I put out.](userimages/customs/48500/48155-1.jpg) A-Bomb Marvel Legendsby TNT CUSTOMZHi Realmers! I thought I'd share my A-Bomb with you. As you can probably tell I used Abomination as a base which has been done many times before me, ...9 comments |
![[Massacre] So this guy was a request but I really like the way he turned out so I wanted to share. Especially since there are so many Drax's out there it's great if we can put him to good use. So, he pretty much was just a repaint of Drax, molding to the head, a really cool vest from the new ML Captain America and some bad*** guns, ha ha! Oh and I almost forgot the mask is from a vinyl sunglass case, works great, don't ever throw them out! Thanks for looking guys!](userimages/customs/48000/47941-1.jpg) Massacre Marvelby TNT CUSTOMZSo this guy was a request but I really like the way he turned out so I wanted to share. Especially since there are so many Drax's out there it's great...10 comments | ![[Valkyrie] Hello Realm! Even though I think ML Valkyrie looks pretty good I was hoping to improve upon her sexy warrior appeal!:) To start I used DC Powergirl as a base and molded some more hair on the top. For the braids I wanted to used something that looked and moved like real hair. It seems whenever I use clay it tends to break and it limits the movement. I ended up using the string used for friendship bracelets, and blended it with the mold so it is very secure. Then I painted it which took away the stringy look and made it look like part of the figure, but with amazing movement! So excited, sorry! As any customizer knows hair can be the biggest challenge at times. All the extras are molding and luckily I found perfect weapons for her. Hope you guys enjoyed looking, thanks!](userimages/customs/48000/47939-1.jpg) Valkyrie Marvelby TNT CUSTOMZHello Realm! Even though I think ML Valkyrie looks pretty good I was hoping to improve upon her sexy warrior appeal!:) To start I used DC Powergirl ...4 comments |
![[Smasher] For female Smasher (Isabel Dare) I used DC Artemis for a base and the head is from a LOTR figure. The rest is mostly molding. As always, thanks for looking!!](userimages/customs/48000/47772-1.jpg) Smasher Marvelby TNT CUSTOMZFor female Smasher (Isabel Dare) I used DC Artemis for a base and the head is from a LOTR figure. The rest is mostly molding. As always, thanks for...3 comments | ![[Siryn] Hello Realm! I wanted to share my version of Siryn. I started with DC Universe Raven as a base, put on a Psylocke head, and added some molding to her hair. I had to add the fiery tips just to give her that extra flair. Thanks for looking!](userimages/customs/48000/47744-1.jpg) Siryn Marvel Legendsby TNT CUSTOMZHello Realm! I wanted to share my version of Siryn. I started with DC Universe Raven as a base, put on a Psylocke head, and added some molding to he...3 comments |
![[Crossbones] I know there are a lot of crossbones out there but i was pretty happy with the results so i had to share. I used wrecking crew as a base, shoulder pads are from a navy seal spawn figure and a lot of molding and patience was involved. Thanks for checking this guy out.](userimages/customs/48000/47613-1.jpg) Crossbones Marvel Legendsby TNT CUSTOMZI know there are a lot of crossbones out there but i was pretty happy with the results so i had to share. I used wrecking crew as a base, shoulder pad...16 comments | ![[Female Captain Universe] I definitely think this one is worth sharing with the realmers, hopefully you guys think so too. For my female captain universe i used a dc universe catwoman as a base and marvel legends madame masque head. I did a little molding but the main thing was trying to get the paint just right. Oh and for the power on the hands i used green planter wire. Thanks for looking guys!](userimages/customs/48000/47594-1.jpg) Female Captain Universe Marvel Legendsby TNT CUSTOMZI definitely think this one is worth sharing with the realmers, hopefully you guys think so too. For my female captain universe i used a dc universe c...12 comments |
![[Colossus (Human Form)] Hi Realmers thanks for looking at my Colossus. For his base I used an Agression wrestler and for the head believe it or not is the Savage Dragon, just added a little molding to the head, feet belt and knee pads and he's done! See ya guys!](userimages/customs/47500/47071-1.jpg) Colossus (Human Form) Marvel Legendsby TNT CUSTOMZHi Realmers thanks for looking at my Colossus. For his base I used an Agression wrestler and for the head believe it or not is the Savage Dragon, jus...10 comments | ![[Shadowcat (Kitty Pryde)] For the base of Kitty I used Marvel Legends Mystique and the head is from Batgirl. The rest is done with molding and a lot of patience, since I wanted to get her right. Thanks for looking realmers:)!](userimages/customs/47500/47069-1.jpg) Shadowcat (Kitty Pryde) Marvel Legendsby TNT CUSTOMZFor the base of Kitty I used Marvel Legends Mystique and the head is from Batgirl. The rest is done with molding and a lot of patience, since I wante...6 comments |
![[Magik] I started out with Spiral as a base which in itself is a challenge, gave her a head I had from a Pirates of the Carribean figure and gave her X-23's hair with a little altering. Magik is a good looking figure and hopefully I did her justice. Thanks for looking and I always appreciate your comments. By the way, Happy New Year's!!! Hopefully it's a good one for all of us:)](userimages/customs/46000/45730-1.jpg) Magik Marvel Legendsby TNT CUSTOMZI started out with Spiral as a base which in itself is a challenge, gave her a head I had from a Pirates of the Carribean figure and gave her X-23's h...13 comments | ![[Puck (Uncanny X-Force)] I did this version of puck as a request and just wanted to share the results with the realmers. I used a marvel universe juggernaut and pretty much just shaved off his hair, gave him a mustache, added some apoxie to his arms to make it look like he's wearing a jacket and added the detailed straps and zipper. Thanks for checking him out and happy holidays!](userimages/customs/45500/45007-1.jpg) Puck (Uncanny X-Force) Marvel Legendsby TNT CUSTOMZI did this version of puck as a request and just wanted to share the results with the realmers. I used a marvel universe juggernaut and pretty much ju...4 comments |
![[Silver Samurai] I really like the MU version of Silver Samurai so I just tried to go off him but made him in a six inch. I used the Faceoff Punisher as a base with the old school Toybiz Silver Samurai figure. Have to admit I have seen this recipe being used and decided to go with it too. I Added some molding to make the shields, cut up a vinly sunglass case for the skirt, and used some thin silver wire to make the string detail on the legs. Hope you guys enjoy, have a great weekend!](userimages/customs/42000/41666-1.jpg) Silver Samurai Marvel Legendsby TNT CUSTOMZI really like the MU version of Silver Samurai so I just tried to go off him but made him in a six inch. I used the Faceoff Punisher as a base with th...8 comments | ![[Amora, the Enchantress] I must say I was a little doubtful I could custom a good Enchantress but I went ahead and gave it a shot. I used Cheetah as her base with a Powergirl head and Bishop's hair. I hope you like how she turned out, didn't want to mess this one up. Thanks for looking guys!](userimages/customs/41500/41062-1.jpg) Amora, the Enchantress Marvelby TNT CUSTOMZI must say I was a little doubtful I could custom a good Enchantress but I went ahead and gave it a shot. I used Cheetah as her base with a Powergirl...14 comments |
![[Spirit] I was inspired to make Spirit after watching him fight Storm Shadow in a GI Joe cartoon. I used Wonderman as a base and I used the hawk from Street Fighter to make Freedom. I hope you like him and as always your comments are welcome. Thanks for looking!](userimages/customs/41000/40672-1.jpg) Spirit G.I. Joeby TNT CUSTOMZI was inspired to make Spirit after watching him fight Storm Shadow in a GI Joe cartoon. I used Wonderman as a base and I used the hawk from Street F...14 comments | ![[Emma Frost (White Queen)] Hi guys! I had a request to make a Emma Frost, so here she is. I used one of my favorite base figures, Donna Troy with the Emma Frost cape and Sabretooth faceoff fur. Thanks for looking, I hope you like her.](userimages/customs/41000/40554-1.jpg) Emma Frost (White Queen) Marvel Legendsby TNT CUSTOMZHi guys! I had a request to make a Emma Frost, so here she is. I used one of my favorite base figures, Donna Troy with the Emma Frost cape and Sabre...9 comments |
![[Scarlett] Here is my version of Scarlett to add to my GI Joe collection. Believe it or not I used Emma Frost as her base. The hair is completely molded and to keep the ponytail in place I first drilled in a screw and wrapped some wire around it to help it fly. I hope you like it.](userimages/customs/40500/40365-1.jpg) Scarlett G.I. Joeby TNT CUSTOMZHere is my version of Scarlett to add to my GI Joe collection. Believe it or not I used Emma Frost as her base. The hair is completely molded and to...9 comments | ![[Cobra Commander] So, I figured since I put out a Destro and Baroness I had to add Cobra Commander to the collection. I used Madman as a base figure, sculpted the boots and gloves, made the outfit from Ravens cape and the helmet is from Spiral. All the feedback on my other figures has been great and hope you like this one too. Thanks for looking!](userimages/customs/40500/40363-1.jpg) Cobra Commander G.I. Joeby TNT CUSTOMZSo, I figured since I put out a Destro and Baroness I had to add Cobra Commander to the collection. I used Madman as a base figure, sculpted the boot...4 comments |
![[Destro] Hi Realmers! I'm putting out a few GI Joe figures and just wanted to show you one of my favorites, Destro! His base figure is Marvel Legends Drax, collar is from Mr. Sinisters cape and the rest is some molding with some odds and ends I threw together for him. Hope you like!](userimages/customs/40500/40216-1.jpg) Destro G.I. Joeby TNT CUSTOMZHi Realmers! I'm putting out a few GI Joe figures and just wanted to show you one of my favorites, Destro! His base figure is Marvel Legends Drax, c...22 comments | ![[Trish] I wanted to show you guys my latest version of Trish. I used the Donna Troy figure from DC Universe, and I took the cape from Black Panther to make her coat. The hair is from X-23 and I took the actual sword from the Devil May Cry Dante figure. It took a lot of patience and detail to create her but I hope you think it was well worth it. Thanks for looking my fellow realmers!](userimages/customs/40500/40209-1.jpg) Trish Street Fighterby TNT CUSTOMZI wanted to show you guys my latest version of Trish. I used the Donna Troy figure from DC Universe, and I took the cape from Black Panther to make h...10 comments |
![[Pixie] Here's my version of the little Pixie mischief-makers from Harry Potter. The base figure is a Polly Pocket and completely made over with mold and paint. Believe it or not this little guy took me longer to create than most of my other customs. I hope you like him, thanks for looking!](userimages/customs/40000/39950-1.jpg) Pixie Harry Potterby TNT CUSTOMZHere's my version of the little Pixie mischief-makers from Harry Potter. The base figure is a Polly Pocket and completely made over with mold and pai...2 comments | ![[Trish] So I figured since I put up Dante, and a lot of you liked him, Trish would have to follow. She was created using Donna Troy with X-23's modified hair. Did a little shaving to the belt, added some molding, gave her a couple weapons, paint job and she's good to go.](userimages/customs/40000/39914-1.jpg) Trish Capcomby TNT CUSTOMZSo I figured since I put up Dante, and a lot of you liked him, Trish would have to follow. She was created using Donna Troy with X-23's modified hair...5 comments |
![[Dante] Hi guys! Where to begin? I probably put more effort into this guy than any I've done in the past so I have to share him with all of you. I started out with Nick Fury as the base figure and I put on a DC Universe Superboy head and molded the hair w/Apoxie. I added the straps to the trench coat along with the sword holder on the back from random figures. I cut out his vest from a plastic sheet and painted it and added the buckles. A little molding to the boots, belt, sword and guns was added and of course the paint. I hope you like it!](userimages/customs/40000/39773-1.jpg) Dante Marvel vs Capcomby TNT CUSTOMZHi guys! Where to begin? I probably put more effort into this guy than any I've done in the past so I have to share him with all of you. I started ...17 comments | ![[Baroness] For this custom I used DC Universe Raven. I removed her hooded cape and gave her X-23's hair, Superboy's glasses and just added some custom straps and weapons. The rest is just a simple paint job.](userimages/customs/40000/39721-1.jpg) Baroness G.I. Joeby TNT CUSTOMZFor this custom I used DC Universe Raven. I removed her hooded cape and gave her X-23's hair, Superboy's glasses and just added some custom straps an...22 comments |
|