![[Punisher V3] nothing too special about this one i just wanted to create a punisher to stand tall and in better scale compared to all my other custom figures.i still like my other versions but they just didn't have the correct size and looked awkward on the shelf in comparison.the recipe is pretty simple i used a new basic wwe hhh figure for the torso and added the arms from john cena.for the lower body i sacrificed my punisher v2 and joined it with the hhh upper body.the head is a ml punisher that i bought in a lot of action figs online.i decided to use the dry brush technique for the skull and the teeth/bomb thingies i made outta some wooden skewers.the last thing to do was to add the arsenal,i gave him two pliskin revolvers minus the scopes,bucky cap holster and pistol,bucky cap combat knife,machine gun from t3,and the rest was put together from the fodder bin.ther is lots of awesome punisher customs on the realm and there is a good reason for that.he is such an imposing figure and is always a lo](userimages/customs/50000/49531-1.jpg) Punisher V3 Punisherby scorpio13nothing too special about this one i just wanted to create a punisher to stand tall and in better scale compared to all my other custom figures.i stil...5 comments | ![[Armor King] as soon as i finished my custom king figure i knew i had to make armor king to stand next to him on my shelf.for starters the head is the same i used for king a dcuc bronze tiger.the upper body is a wwe elite ezekiel jackson,and the lower body is a wwe legends demolition smash figure.most of the work on this guy went into sanding and painting with a little bit of fab work for the fur part of the mask.i decided not to paint the arms as they were already the proper color for armor king,judging from the games and some online images his skin tone is much darker than kings.ezekiel had a couple arm tattoos that easily wiped off with a little nail polish remover.not much else to say just added some armor pieces from my fodder bin and repainted the rest of the figure to match his ingame counterpart.this guy was loads of fun to make and i am proud to say he is the first incarnation of armor king here on the realm.hope u all enjoy him as much as i do.](userimages/customs/49500/49460-1.jpg) Armor King Tekkenby scorpio13as soon as i finished my custom king figure i knew i had to make armor king to stand next to him on my shelf.for starters the head is the same i used ...7 comments |
![[Bryan Fury] ive been wanting to make a custom wwe bryan fury to fit in with my other customs so i finally decided on a proper base figure to use and this is what i came up with.first off the head is quicksilver i sanded off the hair and re-sculpted it.that process was actually a lot of fun because i had never tried it before and am very pleased with the result.the top half is a wwe dolph ziggler joined together with the lower half of wwe legend bushwhacker luke.i mixed up some model masters skin tones for all exposed skin,then painted the scars using some burnt sienna.i painted the hair and the eyebrows to match,then painted the pants with tamaia dark blue.the bullet belt,grenade rounds,straps,and pouches all came from the fodder bin.this dude looks badass standing next to my custom king and i hope u all enjoy seeing him as much as i do.](userimages/customs/49500/49425-1.jpg) Bryan Fury Tekkenby scorpio13ive been wanting to make a custom wwe bryan fury to fit in with my other customs so i finally decided on a proper base figure to use and this is what ...4 comments | ![[King] i just finished this guy and couldnt wait to post him up on the realm.i wanted to create this guy for a while and i finally got some good inspiration to do so.king is my all time favorite fighting game character,so i really wanted to do him justice and stick closer to the his look from my favorite,tekken tag tournament for the ps2.i put this guy together using several wrestling figures and a dcuc bronze tiger head.aside from the knee and elbow pads everything on this figure from the skin tone,jaguar patterns,trunks,and boots have been repainted to match his in game counterpart that served as the inspiration for this custom king figure.this guy was tons of fun to make and he is instantly my new favorite of all of my custom figures.hope u all enjoy checking this one out!](userimages/customs/49000/48710-1.jpg) King Tekkenby scorpio13i just finished this guy and couldnt wait to post him up on the realm.i wanted to create this guy for a while and i finally got some good inspiration ...12 comments |
![[Ghostrider V2] after i finished this ghostrider figure there was only one thing missing...THE HELL CYCLE! i put this bike together using two different 1/12 scale maisto models.basically i combined the wheels and tires from a ninja with the main body and frame from a benelli.i did the usual hot glue/clear orange for the flames and painted the engine orange as well.i made the front shield from an old dvd case painted black and glued into place with some gorilla glue epoxy.the head lights are made from some stickers stuck to some styrene and glued into place.i did a little tweaking to the rider as well.first i redid his skull flames,then replaced his arms for a mgs2 ocelot figure,painted to match,then added the spikes.i am much happier with this version of him as he felt very naked without his iconic ride.hope u all enjoy this much needed update.](userimages/customs/48500/48186-1.jpg) Ghostrider V2 Ghost Riderby scorpio13after i finished this ghostrider figure there was only one thing missing...THE HELL CYCLE! i put this bike together using two different 1/12 scale mai...10 comments | ![[Wolverine V2] I never was really satisfied with my original wolverine,and thought I could do much better with him,so here is my attempt at this classic character.i took a ml drax,and switched out the head,arms,and boots.the belt is from drax with a fantomex x emblem.i finished him up with the x force black&grey paint job.the head in the first pic is a repainted dark wolverine,and in the last two pics is a repainted wolverine cake topper.as always a lotta fun to make and hope u all enjoy looking.](userimages/customs/48500/48185-1.jpg) Wolverine V2 X-Forceby scorpio13I never was really satisfied with my original wolverine,and thought I could do much better with him,so here is my attempt at this classic character.i ...4 comments |
![[Amazonian Warrior] head:mcfarlane valkery
base figure:wwe natalya
ive had this one finished for a while now and am just now getting a chance to post it.this bad girl amazonian warrior started as a gift to my girlfriend. originally she was supposed to be some sort of fairy/warrior with wings,but throughout the creation of her she started to take on a much different look.i basically started with a wwe natalya,and swapped the head for a mcfarlane valkery.painted a custom skin tone,and a deep dark red for the lips.all clothing,armor and accessories are from various female mcfarlane figures.i wanted to keep some consistency so i repainted all of the white cloth and bronze armor to match.i am very happy with how she turned out,but i cant say the same for my girlfriend.she said the lips are too big,the skin is too dark,she hates the blonde hair,and on top of everything else,she is not a fairy.lol thats fine with me it just means that i get to keep it for myself and she looks pretty cool next to he man and skele](userimages/customs/48000/47759-1.jpg) Amazonian Warrior Spawnby scorpio13head:mcfarlane valkery
base figure:wwe natalya
ive had this one finished for a while now and am just now getting a chance to post it.this bad girl ama...4 comments | ![[Batman] head:wwe randy orton
torso&upper legs:wwe randy orton
arms:wwe john cena
boots:wwe daniel brian
another character ive wanted to create for a while and i am very happy with how it turned out.basically i started with a wwe randy orton base ,switched out the boots,and added john cenas arms to give him some more bulk up top.i applied a custom paint job from head to toe,going for more of a vintage arkham city type color scheme.i custom made the head using a wwe randy orton and applying some dental picks for the bat ears smoothed and molded into the head .the cape is from a mcfarlane ozzy osbourne painted to match the rest of the figure.as always a lot of fun went into making this one and hope u all enjoy.](userimages/customs/48000/47664-1.jpg) Batman Batmanby scorpio13head:wwe randy orton
torso&upper legs:wwe randy orton
arms:wwe john cena
boots:wwe daniel brian
another character ive wanted to create for a while...2 comments |
![[Spawn] head:john cena
torso&legs:wwe elite sheamus
arms:wwe elite randy orton
hands:ml ghostrider
boots:mcfarlane spawn
i wanted to create a custom spawn for a while now so here is my shot at one of my favorite characters.its basically a wwe elite sheamus base,switched out the arms and boots from a couple spawn figures and applied a complete custom paint job from head to toe.i gotta give g brand and his black tarantula credit for the idea of using a john cena head.im not sure if he invented that trick,but he made it look so freakin good i decided to try it for myself,and am very pleased with the outcome.the cape was cobbled together using a wwe hhh cape and added a collar from a spawn cape then painted the same red as before to match.i finished this guy up by adding various skulls and chains cause spawn would be naked without them.as always this one was a lotta fun to make and hope u all enjoy looking.](userimages/customs/48000/47663-1.jpg) Spawn Spawnby scorpio13head:john cena
torso&legs:wwe elite sheamus
arms:wwe elite randy orton
hands:ml ghostrider
boots:mcfarlane spawn
i wanted to create a custom spawn...7 comments | ![[Ghostrider] head:headless horseman
body;steve rogers
basically after seeing all the awesome ghostriders on the realm i just had to create one of my own.he is not meant to be comic book,or even movie accurate by any means,just my take on him with my skillset and the resources i have to work with.pretty much hot glue flames finished with tamaya clear orange.i painted both the bike and figure flat black,then drilled a bunch of holes,inserted some nickel colored nails,then finished off with jump rings.we all know ghostrider has to have a chain so i gave him a chrome craft chain with jewelry wire threaded thru for posability.i am happy with the result and might try to make an improved version of him some day? hope u all enjoy checkin this guy out.](userimages/customs/46500/46142-1.jpg) Ghostrider Ghost Riderby scorpio13head:headless horseman
body;steve rogers
basically after seeing all the awesome ghostriders on the realm i just had to create one of my own.he is not ...8 comments |
![[Punisher V2] head:steve rogers
torso:randy orton
arms:bret hart
crotch:john cena
upper legs:bret hart
knees:ml punisher
boots:randy orton](userimages/customs/46500/46123-1.jpg) Punisher V2 Punisherby scorpio13head:steve rogers
torso:randy orton
arms:bret hart
crotch:john cena
upper legs:bret hart
knees:ml punisher
boots:randy orton...14 comments | ![[Wolverine] head;wolverine cake topper
torso&upper legs;alberto del rio
arms;john cena
lower legs:ricky steamboat
boots:ml punisher.
nothing real special or different for this one just wanted to create a custom wolverine of my own.started with alberto del rio,and switched out arms for john cena,lower legs for ricky steamboat,and boots for ml punisher.his head is actually from a wolvie cake topper i found online,the figure itself was less than impressive,but it has a good head sculpt and fit pretty well on the base figure after a few minor modifications.i finished him up with the black and grey paint job.i realize i got the colors reversed ant its not exactly comic book accurate but i am happy with it all the same.standard metal hair pin claws,and belt is from my boneyard painted to match his costume.not too difficult to pull this one off and he looks pretty good next to my punisher and ghostrider.thanks for looking and hope u all anjoy.](userimages/customs/46500/46068-1.jpg) Wolverine X-Forceby scorpio13head;wolverine cake topper
torso&upper legs;alberto del rio
arms;john cena
lower legs:ricky steamboat
boots:ml punisher.
nothing real special or d...4 comments |
![[Centaur] upper body;hulk
horse body;mcfarlane thunderhoof
i put a lot of work into this monster thru the course of eight days or so and im glad to finally be sharing it with everyone on the realm.lots of sanding,painting,washes and gluing went into this project and i even found some time to throw in a custom somewhat home made spear.this one was a challenge all the way,but at the same time a lot of fun to create.hope u all enjoy looking at this beast as much as i do.](userimages/customs/46500/46066-1.jpg) Centaur God of Warby scorpio13upper body;hulk
horse body;mcfarlane thunderhoof
i put a lot of work into this monster thru the course of eight days or so and im glad to finally be s...8 comments | ![[Skeletor] head:ml ghostrider
torso&arms:wwe john cena
crotch&lower legs:wwe randy orton
feet:mcfarlane berserker the troll
what good would a he man custom be without a custom skeletor to compliment him? i actually finished this custom weeks ago and have been wanting to post it ever since. basically its a john cena upper body fitted together with a randy orton lower body.i a complete paint job head to toe and some various wwe and mcfarlane parts to finish it up.i am very pleased with how this one turned out,it was a lot of fun to make and looks pretty cool next to my custom he man.thank u all for looking and hope u all enjoy.](userimages/customs/45500/45438-1.jpg) Skeletor |
![[He Man] head:wwe randy orton
torso&upprs legs:wwe elite hhh
arms:wwe john cena
hands:random wwe
lower legs:mcfarlane bluetooth
after many weeks off wanting to post this guy i finally found some time and figured out how to work my new camera.i was inspired by the realm and all the beautiful creations to create a one of a kind he man of my own.mostly wwe parts with some mcfarlane pieces thrown in and painted to match,i am very happy with how this one came out and hope u all enjoy it as much as i do.thank u all for looking and have a merry christmas!!!](userimages/customs/45500/45435-1.jpg) He Man | ![[Viking Rider] the horse was fairly simple done by cutting and piecing armor from spawn the bloodaxe figure.the rider i started by switching the head using a spawn dark raider with a little bit of drilling and dremel work it fit right into place.i then popped off the antlers and added a pair of horns to the skull.the body straps came from another random mcfarlan figure secured with metal rings in front and back.the belt was lifted from dark ages skull splitter v2.the fur undies were made by cutting,fitting,and gluing craft fur to the base.the legs are from the skull splitter figure.i first had to cut them to size,drill,and dremel holes to receive the pegs on the upper legs then reattached the original knee guards.the forearms are from skull splitter.i cut the forearms from the base figure,then added pegs to attach the new ones without losing articulation.to get the dirty muddy look i thinned down some black paint and washed the figure from head to toe.to finish this custom i cut some black fabric int](userimages/customs/42000/41766-1.jpg) Viking Rider Spawnby scorpio13the horse was fairly simple done by cutting and piecing armor from spawn the bloodaxe figure.the rider i started by switching the head using a spawn d...11 comments |
![[Hell Spawn] this was a fairly simple custom acheived by switching around some parts.istarted by removing zeus head lower arms and all armor pieces.first i cut the helmet off of a spawn the bloodaxe figure and added on zeus hair and helmet then attached to the base figure.next i removed the lower arms and shin guards from mcfarlans raven spawn.the arms pretty much fit onto the base figure easily with very little effort.to attach the shin guards i dremeled notches into zeus shins to receive the notches in the shin guards then attached them with some glue.the belt was from the bloodaxe figure fitted into place and added the ram head from kratos ares armor to the center.i then added the shoulder pads and axe that came with the bloodaxe figure.to finish this custom i painted all of the armor and the axe flat black then applied a silver wash for the worn metal look.all together pretty simple conversion but i am happy with the result.hope u all enjoy.](userimages/customs/42000/41764-1.jpg) Hell Spawn Spawnby scorpio13this was a fairly simple custom acheived by switching around some parts.istarted by removing zeus head lower arms and all armor pieces.first i cut the...8 comments | ![[Punisher] at the time when I made this guy I was pretty happy with him and got some good feedback from the realm as well.being only my second custom ever it had some pretty crappy paint on it and some issues with the hands where they attach to the wrists so I decided to fix him up a little bit.i started by replacing the forearms and hands,then did some sanding on the joints especially around the shoulder areas.i wanted him to have an even skin tone throughout so I mixed up some model masters skin tones and painted his face,neck,and arms.the biggest problem I had with him before was the paint apps on his shirt and pants,so I completely repainted them using model masters flat black using various sized brushes for the eye,nose and teeth areas of the skull emblem.at last I gave him another hand cannon for his left hand and an m16 slung around his shoulder.i took some pics with my new camera and I am much happier with the results this time.hope u all enjoy looking at this much needed updated custom i](userimages/customs/42000/41718-1.jpg) Punisher Punisherby scorpio13at the time when I made this guy I was pretty happy with him and got some good feedback from the realm as well.being only my second custom ever it had...17 comments |
![[Kratos] i started this customusing a wwe elite sheamus base figure.first off i painted the entire figure a flat grey,then added a couple layers of dry brush flat white, then finished the basic paint job by masking off the design i wanted for the head and body tattoo, then painted a couple layers of flat red.next i repainted the eyes white and addes some flat black for the pupils,eyebrows,ang goatee.for the gauntlet designs i cut some red fabric into strips and wrapped it around the forearms for the look.i then cut,wrapped and fitted tin foil to the arms and painted a dark golden color.i usud some costume jewelry to wrap the chains and then painted the same golde color.finally fitted the chains to the blades using a couple craft jump rings.the skirt was made using the same fabric as the arms and masked off the pattern and painted gold.i then added the leather piece and added jump rings for the look. i took the lower legs from the neca ares armor kratos,cut them in half vertically, then dremeled](userimages/customs/42000/41717-1.jpg) Kratos God of Warby scorpio13i started this customusing a wwe elite sheamus base figure.first off i painted the entire figure a flat grey,then added a couple layers of dry brush f...10 comments | |
|