![[Ironvman Mark 42 Ver 2.] Just a repaint of the mark 42.But with the classic Iron man colors.Inspired by seeing some pix online that were photoshoped on how he would look.](userimages/customs/51000/50539-1.jpg) Ironvman Mark 42 Ver 2. Marvel Legendsby Solid KobraJust a repaint of the mark 42.But with the classic Iron man colors.Inspired by seeing some pix online that were photoshoped on how he would look....6 comments | ![[Iron Man Mark 7] So this is just a revoltech mark 7.He is one of the only revoltech ironman that is close to scale to marvel legends.The first thing I did is paint so of the revoltech jointsbthat were a flat color.Then I gave him a head swap for a mark 6 head paint matched ,since the revoltech head wasnt a good ironman helmet sculpt.And now since the mark 42 is taller then the othr ironman figures,And the mark 6 and mark 5 were to modded for estra height,I had to give this mark 7 height,which is simple i just slightly pulled out the revoltech joints(stretched him) on the knee feet and torso,neck.Giving him better height and in scale with my other iron man.I also stuff the torso since it was sunk in at the stomach due to it being rubber](userimages/customs/51000/50538-1.jpg) Iron Man Mark 7 Marvel Legendsby Solid KobraSo this is just a revoltech mark 7.He is one of the only revoltech ironman that is close to scale to marvel legends.The first thing I did is paint so ...1 comments |
![[Iron Man Mark 4] So I this is a mark 4 Iron man ,base is the stealth strike ironman wich is the same base as mark 4,I just repainted him.And also added height to him,Esay trick I learned.Heat and pop kneew joint, drill another hole above the hole were the plastic pin goes tru on the knew joint,it made him better in scale with other movie figs.I did this also to the mark 6.Check out my other custom(Ironman mark 7) for size comparison.I will be posting a tutorial hopefully on how to increase height.Thnx for looking enjoy](userimages/customs/51000/50537-1.jpg) Iron Man Mark 4 Marvel Legendsby Solid KobraSo I this is a mark 4 Iron man ,base is the stealth strike ironman wich is the same base as mark 4,I just repainted him.And also added height to him,E...4 comments | ![[Utron Marvel Legends] So this another repaint of a ultron figure great figure but i wish he was a bit taller and imposing,so like most of you all m gonna army build them,and heres a repaint same as the MS classic ultron.Thnx for looking n enjoy .I will be posting a few more customs.](userimages/customs/50500/50481-1.jpg) Utron Marvel Legends Marvel Legendsby Solid KobraSo this another repaint of a ultron figure great figure but i wish he was a bit taller and imposing,so like most of you all m gonna army build them,an...4 comments |
![[Ultron] OK so here is a repaint of the already perfect Marvel select Ultron. I just didn't like the paint, so i gave a him a full paint job. Couldn't decide on the color so i finally picked Polished aluminum. It came out just the right kind of silver shading I wanted it using black as base of course. Then used clear red for the eyes and mouth and lines. Then a clear gloss coat and that was it. BTW he is my main Ultron I use for marvel legends. Enjoy and thanks for looking.](userimages/customs/50500/50478-1.jpg) Ultron Marvel Legendsby Solid KobraOK so here is a repaint of the already perfect Marvel select Ultron. I just didn't like the paint, so i gave a him a full paint job. Couldn't decide o...2 comments | ![[Luke Cage] So this is a Luke cage figure I decided to make using the dc universe figure birdman ,and the lower legs of drax, I also used apoxy sculpt for greater muscle definition on thighs knees and chest also arms and sculpted some more muscle on his back and neck, also to cover the gap between his waist and torso. Used drax's head and spliced off a bit on the jaw line/chin area to make the head a little smaller. Then a repaint a full repaint.My goal was to capture his height and muscle tone and the yellow color shirt(tho you cant see the yellow very well again) I managed all that and Im happy. Thanx for looking enjoy the crappy pix haha.](userimages/customs/50500/50477-1.jpg) Luke Cage Marvel Legendsby Solid KobraSo this is a Luke cage figure I decided to make using the dc universe figure birdman ,and the lower legs of drax, I also used apoxy sculpt for greater...7 comments |
![[Agent Venom] Ok I've seen this done already here and gave it a shot my way.The top part is from the Marvel select flash thompson venom and the waist and thighs are from big time spidey. The legs are from ghost rider the newer marvel legends version.His arms from elbow and down are also ghost riders.I gave him another extra pair of shoulder pads for close quarter combat,its also removable and doesn't hinder movement.His head belongs to big time spidey and neck of the figure was modded to shorten the neck.His revolver holster was relocated to the back as seen in the first picture.Added the knee guards from the marvel select figure and also the thigh holster which is move able and not glued in place and doesn't slide off.I now have a legends scale Agent Venom!!](userimages/customs/50500/50450-1.jpg) Agent Venom Marvel Legendsby Solid KobraOk I've seen this done already here and gave it a shot my way.The top part is from the Marvel select flash thompson venom and the waist and thighs are...5 comments | ![[Wolverine] So heres another custom,Its just a repaint of the x-force wolverine,was needing one badly and couldn't wait for the new one we r getting so i just made one.The yello i used i had to mix paint to get it,its more of a mixture of like orange and yellow,really color in person.I also gave him a utility belt and painted the claws chrome.thnx for looking enjoy](userimages/customs/50500/50449-1.jpg) Wolverine Marvel Legendsby Solid KobraSo heres another custom,Its just a repaint of the x-force wolverine,was needing one badly and couldn't wait for the new one we r getting so i just mad...7 comments |
![[Spawn] Here is a spawn figure I made,i have the 10th anniversary one but didn't really like it so i decide to make one better.So his base is Bucky cap with bigtime spidey lower legs.His Cape and head came from 10th anniversary spawn.Also has a pair of hands one is a fist the other open palm,but forgot to post pictures of em.The rest of the details was sculpted (some spikes are sculpted some are from the other spawn figure.I gave him spikes were i thought needed,somewhat like the movie.His cape was modded so it doesn't cover him all the way.His chain attaches to his waist via magnets.He also has one chain that is pose able thnx to the bendie wire.Thanx for looking!!](userimages/customs/50500/50428-1.jpg) Spawn Marvel Legendsby Solid KobraHere is a spawn figure I made,i have the 10th anniversary one but didn't really like it so i decide to make one better.So his base is Bucky cap with b...9 comments | ![[War Machine] So for my 5th custom of the day and goin,here is a War machine based on Jin's recipe, its the batman armory figure with a marvel legends war machine head,the mask is re tooled and still comes off.Warmichine's top chest armor with the removeable shoulder silver pads or whatever they are called.The arms are from house of M ironman with warmachine's wrist guns.Also made his mini gun articulated.And a full paintjob.Enjoy thnx for looking.](userimages/customs/50500/50427-1.jpg) War Machine Marvel Legendsby Solid KobraSo for my 5th custom of the day and goin,here is a War machine based on Jin's recipe, its the batman armory figure with a marvel legends war machine h...3 comments |
![[Iron Patriot Movie Version] This figure I only added a lil bit of silver bits he was missing,and then a coat of gloss which makes that blue color nicer,not much but its an improvement! :)](userimages/customs/50500/50396-1.jpg) Iron Patriot Movie Version Marvel Legendsby Solid KobraThis figure I only added a lil bit of silver bits he was missing,and then a coat of gloss which makes that blue color nicer,not much but its an improv...0 comments | ![[Ironman Mark 42] This is just your basic ironman mark 42 Marvel legends repaint.At first glance i thought he was ok,but then realized he was no where near,he was missing the silver/gunmetal paint apps that he's supposed to have.So I added that to be more movie accurate and also painted those silly baby blue eyes and chest reactor.and finally gave him a nice coat of wet gloss to make him more armory and clean.Hope you guys like him, and thanx for looking!! questions will be answered.](userimages/customs/50500/50392-1.jpg) Ironman Mark 42 Marvel Legendsby Solid KobraThis is just your basic ironman mark 42 Marvel legends repaint.At first glance i thought he was ok,but then realized he was no where near,he was missi...1 comments |
![[Deadpool(V.2)] So this is the same deadpool I made with minor altercations(recap bucky cap base with removeable shoulder holster and katanas,and knife at his left leg.And heres what I added on V.2 deadpool, sculpted logo on his belt.Also gave him a new head from the 2 pack deadpool,then I repainted him with better colors using Vallejo paints,and sealed him off.I am much happier with how he turned out this time.Also put on his harness on hit monkey for demostration.Feel free to ask any questions and thanx for looking!](userimages/customs/50500/50387-1.jpg) Deadpool(V.2) Marvel Legendsby Solid KobraSo this is the same deadpool I made with minor altercations(recap bucky cap base with removeable shoulder holster and katanas,and knife at his left le...1 comments | ![[Spider-Man] So this is my first of many customs done in spring.I always wanted a spider-man well articulated but not to thin or buff,so I picked up a sinister 6 spider-man used his torso chest,and hands with a FF spider-man legs(from ball hip to toe) and arms and shoulders.Then I used the pre-marvel legends Mcfarlane spider-man classics head and then a repaint,added some krazy glue to joints to stiffen them up so its not loose.There you have it!](userimages/customs/50500/50386-1.jpg) Spider-Man Marvel Legendsby Solid KobraSo this is my first of many customs done in spring.I always wanted a spider-man well articulated but not to thin or buff,so I picked up a sinister 6 s...1 comments |
![[Ironman Mark 6] So I repainted a mark 6 with detail and clear paints.I wanted a more realistc paint job like movie and hot toys,and here it is it shines really nice and looks great like a real armor color](userimages/customs/48000/47804-1.jpg) Ironman Mark 6 Marvel Legendsby Solid KobraSo I repainted a mark 6 with detail and clear paints.I wanted a more realistc paint job like movie and hot toys,and here it is it shines really nice a...5 comments | ![[Venom] Simple and easy.so i finally got the pieces needed to make a ultimate Venom.First I took the new Marvel Select Venom various heads and put them in my Spider-man Classics Venom.I already had a neck peg made before on him,from his previous head transplant, so that was a easy direct pop in replacement for the heads.After that I never really liked the short chunky arms classic venom had,so I took Select Venom's biceps and arms(not shoulder) with heat and pop,and they were a direct replacement to Classic Venom's arms.Then gave him a simple black repaint for the mean time. And vuala a new and better Venom in scale with legends and with the same goodies as Diamond Selects Venom!!](userimages/customs/48000/47803-1.jpg) Venom Marvel Legendsby Solid KobraSimple and easy.so i finally got the pieces needed to make a ultimate Venom.First I took the new Marvel Select Venom various heads and put them in my ...9 comments |
![[Captain America] So i decided to repaint my cap again and give him a few more extras like new arms and shield and color,I kinda based it off the marvel now cap look.His shield is repainted with chrome and clears, also gave it a worn look, scuffs and scratches. Also on his mask the chin strap is removable.](userimages/customs/48000/47801-1.jpg) Captain America Marvel Legendsby Solid KobraSo i decided to repaint my cap again and give him a few more extras like new arms and shield and color,I kinda based it off the marvel now cap look.Hi...3 comments | ![[Ironman Bleeding Edge Ver. 2] So i decided to repaint the new marvel legends ironman,i wanted to give him as a darker tone red but more mettalic look to it,so I did a detailed paint job on it, which pictures could not capture it well,it came out pretty sweet!!Let me know what you guys think!!](userimages/customs/47000/46952-1.jpg) Ironman Bleeding Edge Ver. 2 Marvel Legendsby Solid KobraSo i decided to repaint the new marvel legends ironman,i wanted to give him as a darker tone red but more mettalic look to it,so I did a detailed pain...8 comments |
![[Ironman Concept Mark 6.5] This is a Mark 6 that i added a LED light up to the chest,made him bulkier.Gave him a metallic paint job and and added repulsor blasts.the shoulder missile holders(made of aves epoxy) are removeable like the mark 7's.The look i was going for was somewhat of a a mark 6 and mark 7 mix.There is a size comparison pic too.](userimages/customs/47000/46660-1.jpg) Ironman Concept Mark 6.5 Marvel Legendsby Solid KobraThis is a Mark 6 that i added a LED light up to the chest,made him bulkier.Gave him a metallic paint job and and added repulsor blasts.the shoulder mi...2 comments | ![[Ironman Mark 6] This is a mark 6 with a repaint sprayed him up with tamiya silver and clear red,and brushed in some details too.Also gave him some repulsor blasts.Then a minor black wash.](userimages/customs/47000/46659-1.jpg) Ironman Mark 6 Marvel Legendsby Solid KobraThis is a mark 6 with a repaint sprayed him up with tamiya silver and clear red,and brushed in some details too.Also gave him some repulsor blasts.The...3 comments |
![[Deadpool(Arsenal)] This is a bucky cap base with added ons like nick fury"s gun holster brace(wich is removable),also hasbro deapool's swords,a grenade on belt and a knife holster on lower leg,sculpt over caps head.Pretty fun custom to do.Only thing I didnt want to do is paint the eyes as i wanted to give him a more realistic/movie look. Then I gave him a gun/weapon wall and put a bunch of weapons i had laying around](userimages/customs/47000/46658-1.jpg) Deadpool(Arsenal) Marvel Legendsby Solid KobraThis is a bucky cap base with added ons like nick fury"s gun holster brace(wich is removable),also hasbro deapool's swords,a grenade on belt and ...5 comments | ![[Invincible Ironman] So this is a hauso of M ironman with a transformers ironman head,then sprayed him with silver and clear red.He also has little wings that flap open for the back sorta like boosters will post that later on.](userimages/customs/47000/46620-1.jpg) Invincible Ironman Marvel Legendsby Solid KobraSo this is a hauso of M ironman with a transformers ironman head,then sprayed him with silver and clear red.He also has little wings that flap open fo...2 comments |
![[Amazing Spiderman] This the walmart exclusive movie spiderman with a just a black wash for detail,and also added inter changeable hands,to fists and open palm from ironman mark 6.Then gave him magnets on feet and hands...have a few more customs to put up this week](userimages/customs/47000/46619-1.jpg) Amazing Spiderman Spider-Manby Solid KobraThis the walmart exclusive movie spiderman with a just a black wash for detail,and also added inter changeable hands,to fists and open palm from ironm...7 comments | ![[Captain America Movie] This is the hasbro avengers captain america but the variant version,which came with the movie accurate blue.But the boots and gloves were still bright red ,so i painted them a darker red ,also gave him a movie accurate shield repaint for mettalic look.Last pic he likes his new shield :)](userimages/customs/47000/46618-1.jpg) Captain America Movie Marvel Legendsby Solid KobraThis is the hasbro avengers captain america but the variant version,which came with the movie accurate blue.But the boots and gloves were still bright...2 comments |
![[Bleeding Edge Ironman] This is just a new marvel legends iron man 3 Heroic age/bleeding edge armor iron-man .All i did was give him a black wash to bring out the detail in him that they put.I was so excited when i got him as he completes the group!!Edit i gave him repulsor blast and also his energy sword like in the comics.](userimages/customs/47000/46568-1.jpg) Bleeding Edge Ironman Marvel Legendsby Solid KobraThis is just a new marvel legends iron man 3 Heroic age/bleeding edge armor iron-man .All i did was give him a black wash to bring out the detail in h...10 comments | ![[Captain America] So this is a basic Cap,its a Ultimate Cap with a movie cap head,then brushed blue with also a wash,and other details,pretty basic and classic/modern look i was going for.I will be posting more of my stuff this week.](userimages/customs/47000/46567-1.jpg) Captain America Marvelby Solid KobraSo this is a basic Cap,its a Ultimate Cap with a movie cap head,then brushed blue with also a wash,and other details,pretty basic and classic/modern l...1 comments |
![[Venom] Here are the 2 venoms i made and also comparison of my other one,this is one of my first customs also.The first venom (Sinister SIx base)is just a simple custom with head swap and just painted head,the second venom(mac gargan base)is a complete head sculp(inspired by the animated series spiderman) both heads are intechangeable between bodies,but i cant put any more pictures so ill let ur imagination do the trick.the tounge on the second one is also removable and has two different ones,one is based of the animated series.Also has symbiote tentacles attached by magnets to the back were the old scorpion tale was.Third one is just a SMC venom Mac Farlene style.](userimages/customs/43000/42568-1.jpg) Venom Spider-Manby Solid KobraHere are the 2 venoms i made and also comparison of my other one,this is one of my first customs also.The first venom (Sinister SIx base)is just a sim...3 comments | ![[Carnage] THis Is my first custom,I was inspired to do a carnage from watching the Animeted series Spider Man,so since i couldnt findanybody to make meme one, here it is !!! My carnage is made from Constrictor Base ,the weopons i have for it are from 90s csrnge 5 inch figure,used aves apoxy and magnets to attach it the,.Well i finally have a carnage i wanted.But i will make another head sculp sometime so keep an eye out,I hope he doesnt look to bad,as this is my first custom. right is a fist with detachable claws ,left arm has axe hand/fist with symbiote tentacle/and open .Let me know wat u guys think.](userimages/customs/43000/42567-1.jpg) Carnage Spider-Manby Solid KobraTHis Is my first custom,I was inspired to do a carnage from watching the Animeted series Spider Man,so since i couldnt findanybody to make meme one, h...10 comments |
|