![[Guzzle] Finally found another WFC Cybertron Brawl and opted to make him into a Guzzle. He is mainly a repaint with slight modifications to ease transformation as this guy has quite a few rub zones.
Body - Brawl
Head - Unknown yellow tow truck TF
Also I want to note that this is the first time I am taking pictures with a newly constructed light box. Tell me what you think of the pics.
Thanks,
Shinobi](userimages/customs/51000/50726-1.jpg) Guzzle Transformersby ShinobitronFinally found another WFC Cybertron Brawl and opted to make him into a Guzzle. He is mainly a repaint with slight modifications to ease transformatio...7 comments | ![[Guiltaur] I am having a blast using this mold. So many uses so little time lol.
Guiltaur here is made from the BH Prime body with a Prime head of a figure I got at Big Lots. Weapons are from an Energon Ravage with other pieces from my fodder box.
He was repainted and washed to make him look like he has seen his fair share of battles.
His weapons can rearrange to make a large canon or a scoped pistol. Weapons can also merge with him in alt mode.
As always thanks for looking,
Shinobi](userimages/customs/51000/50507-1.jpg) Guiltaur Transformersby ShinobitronI am having a blast using this mold. So many uses so little time lol.
Guiltaur here is made from the BH Prime body with a Prime head of a figure I g...5 comments |
![[The Grey Gargoyle] Here's a character I've wanted to make for a number of years and finally got around to making him. And I just noticed this is my 600th submission on the realm. Well, I guess I'll start my way to reach 700 now, lol.
Head: DCD Hush Riddler (Modified)
Base: DCUC Lantern Flash
Forearms: ML Sentry
Lower Boots: DCUC Jemm
Cape & Collar: ML Black Panther & ML Longshot
Everything else was from fodder and/or sculpt
Cleaned and prepped the figure for paint, used a flat grey primer, then coated with Rust-oleum stone texture, painted over with CIT Mechanicus grey, a wash and line fill with P3 Greatcoat Grey, and a light drybrush of CIT Codex Grey.
Also as an accessory with this guy, I rigged up a quick "stone" S.H.I.E.L.D. agent from a Wildcats Pike and a modified neck joint with a Crysis head.
As Always, Thanks For Looking Guys I Appreciate It!](userimages/customs/50500/50149-1.jpg) The Grey Gargoyle Marvel Legendsby ShinobitronHere's a character I've wanted to make for a number of years and finally got around to making him. And I just noticed this is my 600th submission on t...7 comments | ![[TMNT Triceraton] I had a Gladiator Triceraton and have been wanting to use him up but just didn't feel I had a proper base to use his head on. About a week ago, I came into possession of a Nightwatcher Raph and knew I had the base to use the head with since I found some images of the Triceratons using a similar suit.
Head: TMNT Triceraton
Base: Nightwatcher Raph
Tail: TMNT Triceraton
Other items came from fodder
Modified the head to fit onto the body, added a removeable jetpack and backpack. Did a fair amount of little mods to the figure and even though it wasn't really necessary he got a full new paint job that gave him a grittier worn look.
As Always, Thank you For Looking!](userimages/customs/50500/50148-1.jpg) TMNT Triceraton |
![[Machine Man] Machine Man is a once forgotten hero that recently been reintroduced into the Marvel Universe as a dimensional hopping hero. His reintro has given me a chance to bring a modern version of him into 3 Dimensional life. My MM has 9 different accessories that can be swapped in and out to make various weapons out of his hands/ arms. The gun arm can be merged with the claw to make an attack drone.
Machine Man is made from the following:
Body - DC Classics Shark
Head - WWE Justin Gabrielle
Coat - Nick Fury
Arms - Doc Ock
Hands - Johnny Cage
All the robotic arms, hands, etc are all various parts from my fodder bin!
Thanks for looking,
Shinobi](userimages/customs/50500/50013-1.jpg) Machine Man Marvel Legendsby ShinobitronMachine Man is a once forgotten hero that recently been reintroduced into the Marvel Universe as a dimensional hopping hero. His reintro has given me...15 comments | ![[Leatherhead] Found the new Leatherhead figure and wanted to give him an upgrade to his classics self. I added articulation to the wrists gave him a Hill Billy Jim hat and created him a vest. iused an original Lhead shotgun and a bowie knife from my fodder box.
One new paint job later and we got Leatherhead!](userimages/customs/50000/49888-1.jpg) Leatherhead |
![[General Zod (Man of Steel)] Got my hands on a Zod Movie Masters figure and was disappointed that is based on his early version in the movie and not the bearded menace thats going to show later on. I opted to make a light version of the armor for him as Playarts is making a full armored version. This design is based on the armor from the Legos and kids costumes that I have seen in stores.](userimages/customs/50000/49797-1.jpg) General Zod (Man of Steel) Movie Mastersby ShinobitronGot my hands on a Zod Movie Masters figure and was disappointed that is based on his early version in the movie and not the bearded menace thats going...10 comments | ![[Megatron Hybrid] Just like my Hybrid Prime I mixed elements of multi incarnations of Megs and combined them into one figure.
Megs was made using a Beast Hunters Prime, a Scorponok head, a FAB Head, and various other parts and pieces from around my work zone/ fodder bins.
Thanks for looking,
Shinobi](userimages/customs/50000/49617-1.jpg) Megatron Hybrid Transformersby ShinobitronJust like my Hybrid Prime I mixed elements of multi incarnations of Megs and combined them into one figure.
Megs was made using a Beast Hunters Prime...6 comments |
![[New 52 Captain Atom] This was a spur of the moment custom. My own DCUC Captain Atom had quite a few QC problems with it, like screwed up paint and 2 left feet for starters, so I just figured I make him into the the New 52 version.
Head: Sodam Yat
Base: Cap Atom
Hands: Skeletor
Feet: Jemm
Flames: Flash/Ghost Rider
Chest Piece: TF Energon Star
Fixed all the QC problems on the figure, then prepped him for paint. About 4 blues, 2 silvers, and a pearl white made up his paint job.
Thanks for looking guys, I appreciate the views and comments!](userimages/customs/49500/49302-1.jpg) New 52 Captain Atom D.C. Universeby ShinobitronThis was a spur of the moment custom. My own DCUC Captain Atom had quite a few QC problems with it, like screwed up paint and 2 left feet for starter...14 comments | ![[Lugnut (Cybertron Mode)] Lugnut was made from an Eon Kid robot body. I merged it with the legs of an Armada Starscream and used the original figures legs as thrusters on Lugs shoulders. Head was rebuilt using crafting gems and gundam pieces.
I did a complete disassemble and repainted him using a Krylon base with multiple citadels added to for extra coats and detailing.
Thanks for looking,
Shinobi](userimages/customs/49500/49216-1.jpg) Lugnut (Cybertron Mode) Transformersby ShinobitronLugnut was made from an Eon Kid robot body. I merged it with the legs of an Armada Starscream and used the original figures legs as thrusters on Lugs...4 comments |
![[Bat Lantern / Hal Jordan Parallax] After watching Brave and the Bold on Netflix I was inspired to make a Bat Lantern figure. In the process I come to realzie that his armor looked alot like Hal Jordan when he was the evil Green Lantern Parallax. I then used some extra Hal pieces and made a 2 in 1 figure.
Body - John Stewart GL
Shoulders - Toxic fighter Batman
Feet and Guantlets - Toxic Fighter batman
Head - Batman
Greens are a custom blend of Tamiya, Vallejo and Citadels
As always thanks for looking,
Shinobi](userimages/customs/49500/49103-1.jpg) Bat Lantern / Hal Jordan Parallax DC Universeby ShinobitronAfter watching Brave and the Bold on Netflix I was inspired to make a Bat Lantern figure. In the process I come to realzie that his armor looked alot...12 comments | ![[Snow Serpent V2] I made this guy years ago and was digging thru a bin and found him. I wanted to redo the figure with everything I learned thus a revamped version of the Snow Serpent was made.
Base - FF Human Torch
Head - Torch with heavy sculpting
Figure was heavy sanded and sculpted to look more SS like. Fur was added then colored to look more realistic.
Thanks for looking,
Shinobi](userimages/customs/49000/48779-1.jpg) Snow Serpent V2 G.I. Joeby ShinobitronI made this guy years ago and was digging thru a bin and found him. I wanted to redo the figure with everything I learned thus a revamped version of ...3 comments |
![[Alternators Thundercracker] This guy is was actually part of my personal Alternators collection. I sold most of them off and misplaced him and Skywarp. I found TCracker today and touched him up.
This is simply an Armada seeker head attached to the Tracks body. Head was repainted and all Autobot decals removed and changed to Cons. I kept him looking factory to make him match the other figures in my former collection.
Thanks for looking,
Shinobi](userimages/customs/49000/48778-1.jpg) Alternators Thundercracker | ![[Newborn Alien (Alien Resurrection)] I've had this figure sitting in its package for the longest time and taking up space with no idea what to do with it. With that said I just decided to give it a more movie accurate repaint. I also decided to make a base for him so that it looks like he's on a part of the ship. His skin color was achieved by basing rust brown, then an orange drybrush followed by 2 different skin tones, and a stone & olive green mixed wash after all that. I wasn't entirely thrilled with the thing in the beginning, but once I got his new colors on him it's started to grow on me, lol.
Body: AR Newborn
Base: DCD, packaging inserts, & fodder
Thanks for looking!](userimages/customs/49000/48712-1.jpg) Newborn Alien (Alien Resurrection) Aliensby ShinobitronI've had this figure sitting in its package for the longest time and taking up space with no idea what to do with it. With that said I just decided t...4 comments |
![[Demolisher] Been meaning to do this since I traded for the Hailstorm body and decided to use my day off catching up with an old project.
With a name like Demolisher I felt he need some extra firepower over the 8 missiles Hailstorm had. I merged the original Demolisher with the Hailstorm and painted him with an camo version of his Armada color scheme. The shoulder missile plug into the machine guns in alt mode just as the guns can attach to the missile pods.
As always thanks for checking Demolisher out,
Shinobi](userimages/customs/49000/48595-1.jpg) Demolisher Transformersby ShinobitronBeen meaning to do this since I traded for the Hailstorm body and decided to use my day off catching up with an old project.
With a name like Demolis...6 comments | ![[JBL (John Bradshaw Layfield)] I don't do a lot of wrestling figures, I think this might even be my first one, but I've definitely worked enough with the Mattel WWE figs. Anyways long story short, I've had a bunch of Terry Funks lying around in my figure bin taking up space for months. I went to the local thrift store less than a month back and came across a couple of the Jakks WWE figures and JBL being one of them. Recalling JBL's wrestling attire and build, I knew I had a use for one of my Terry Funks.
Head: Jakks JBL
Base: Mattel Terry Funk
Boots: Mattel Randy Orton
Hat from Funk, homemade sweat towel, and all of his other gear came from my wrestling fodder
Name plates were done on high quality gloss paper and were done using Mattycollector's templates.
Touched up and repainted parts of his head, used gloss black on seen areas, and did his wrestling trunks design by hand.
* I know that his regular jacket was more often than not black, but I believe one of his Jakks figures had something similar for a Su](userimages/customs/49000/48551-1.jpg) JBL (John Bradshaw Layfield) Wrestlingby ShinobitronI don't do a lot of wrestling figures, I think this might even be my first one, but I've definitely worked enough with the Mattel WWE figs. Anyways l...2 comments |
![[Modern Havok] Been wanting to make a Havok for awhile but could never decide on which version to make. I came upon a more modern version of his costume that looked like something out of Tron and I knew I had to make that version. I fitted the base body with piping to give it the 3D lighting effect.
Havok is made from:
Body - X3 Cyclops
Head - Superman Blue
Jacket and arms -Xorn
Gloves - X Men Classics Angel
Boots - WWE
As always thanks for looking,
Shinobi](userimages/customs/49000/48520-1.jpg) Modern Havok Marvel Legendsby ShinobitronBeen wanting to make a Havok for awhile but could never decide on which version to make. I came upon a more modern version of his costume that looked...15 comments | ![[Optimus Prime (G1 BH Hybrid)] Got a great deal on a BH Prime and had him sitting around trying to figure out what to do with him. Finally decided to make him look more animated (G1) with a new head, a larger sword, G1 inspired gun, and an energon shield.](userimages/customs/49000/48519-1.jpg) Optimus Prime (G1 BH Hybrid) Transformersby ShinobitronGot a great deal on a BH Prime and had him sitting around trying to figure out what to do with him. Finally decided to make him look more animated (G...12 comments |
![[TMNT Baxter Stockman] After I made my Metallo, I was stuck with what was left of my original one which had no head/neck or hands. After going thru my heads bin to see what might get some ideas flowing I came across a Cyborg head. And then remembering that Baxter Stockman in the 2002-ish series eventually went to virtually a full on robotic body, I found my idea. Then considering the detail, size, and overall design of the base body, I felt it would fit in nice with the new TMNT. It's always nice to actually have fun on a custom and this guy was definitely that.
Head: DCD Cyborg (Rebuilt the entire neck area with fodder/scrap and added ball joint)
Base: SMR Metallo (Removed then replaced chest gem with different color)
Hands: DCD Brainiac
Remove-able Gun: Iron Man
Gave him some pre-paint prep work and then he got a full brand new paint job.
As always, Thanks for Looking!](userimages/customs/48500/48471-1.jpg) TMNT Baxter Stockman | ![[Sentry] This one was relatively simple, but pretty fun regardless. I had a headless ML Sentry lying around and after some searching in my bin of heads I found Eomer's and thought that it would make a decent bearded version. Modded the head to fit, did some prep work and cleaning and finally a new paint job on everything except most parts of the blue sections. Just added some dark gray in those areas to help separate the colors.
Base: ML Sentry
Head: LOTR Eomer
Thanks as always for the views and any comments!](userimages/customs/48500/48278-1.jpg) Sentry Marvel Legendsby ShinobitronThis one was relatively simple, but pretty fun regardless. I had a headless ML Sentry lying around and after some searching in my bin of heads I foun...12 comments |
![[BH Skywarp] I enjoyed working with the BH Screamer mold so much I had to use it again this time for Skywarp.
Warp is the a pretty simple custom as it it is a modified Screamer head and additional Armada homage head and sword.
The sword is a KO Star Sabre merged with styrene with the alt head from a Gundam Heavy Arms.
Again thanks for looking,
Shinobi](userimages/customs/48500/48274-1.jpg) BH Skywarp Transformersby ShinobitronI enjoyed working with the BH Screamer mold so much I had to use it again this time for Skywarp.
Warp is the a pretty simple custom as it it is a mod...3 comments | ![[Terrorsaur BH] Wanted to try repainting some of the BH figures and figured I'd start with making my first Terrorsaur.
Formula is simple its a repainted BH Starscream with a modified head. The head was given a nose job and a a chin strap to more closely resemble the original Terrorsaurs head.
13 different paints later we get Terrorsaur!
Thanks for looking,
Shinobi](userimages/customs/48500/48215-1.jpg) Terrorsaur BH |
![[Foc Skydive] Been wanting to work with a FoC mold and I finally had an idea that would utilize the Screamer mold.
Skydive is the FOC Screamer with a Tomahawk head (visor removed) and a Dark Knight Rises Batmans wings. I used a random fodder gun (I think it was vintage GI Joe) for the tail fin / rifle.
Thanks for looking,
Shinobi](userimages/customs/48500/48089-1.jpg) Foc Skydive Transformersby ShinobitronBeen wanting to work with a FoC mold and I finally had an idea that would utilize the Screamer mold.
Skydive is the FOC Screamer with a Tomahawk head...6 comments | ![[Ultimate Wolverine] Was cleaning out my shed today and came across my ML Ultimate Wolverine. Realizing this guy looked terrible I used the rest of my day to revamp the figure.
Wolvie was given a new head and steel claws. He was then treated to a completely new paint job.
Thanks for looking,
Shinobi](userimages/customs/48000/47884-1.jpg) Ultimate Wolverine Marvel Legendsby ShinobitronWas cleaning out my shed today and came across my ML Ultimate Wolverine. Realizing this guy looked terrible I used the rest of my day to revamp the f...4 comments |
![[Kwik-Strike (Motu)] Figured I try something new this week and do a MoTU figure. I always thought the Snakemen were a cool addition to MoTU and thought I'd expand on its roster.
I made Kwik-Strike to be more of a light armor wearing assassin. He comes equipped with numerous blades as well as his fingers.
Kwik-Strike was made from the following:
Body and head: DC Classics Copperhead
Lower Legs: DC Classics Steppenwolf
Forearms and Hands - LCBH Ripclaw
The belt and waist cloth were both scratch built with swords supplied by my fodder box.
Thanks for looking,
Shinobi](userimages/customs/48000/47854-1.jpg) Kwik-Strike (Motu) | ![[Clear Flashwing] This was a basic Skylanders Flashwing stripped of all of its paint to appear clear. This was a pain in the rear. The paint they use on these little buggers is incredibly strong and it was no picnic tearing this one apart either. I went through 3 brushes and nearly a whole bottle of thinner on this thing. It was finished off with a clear mix of custom purple paint to highlight the details in the mold.
Thanks for looking!](userimages/customs/48000/47692-1.jpg) Clear Flashwing Skylandersby ShinobitronThis was a basic Skylanders Flashwing stripped of all of its paint to appear clear. This was a pain in the rear. The paint they use on these little ...6 comments |
![[Movie Style Metallo] I came across my old custom Metallo figure when I was going thru my boxes. I was really happy with the way the original one came out but felt that it needed an update to a much more larger and articulated figure. And since I had a nanosuit figure available, I went ahead and did just that.
Head: Superman Returns Metallo
Hands: SMR Metallo
Base: Nanosuit
Everything else came from terminator figure and kryptonite gas plumes were tops of missiles
A lot of cutting/drilling and pasting went into this guy followed by cleaning him up. Then a detailed paint job to tie it all up. I figure this would be a decent version for a movie or even the comic books really considering how detailed costumes and what not are getting.
Thanks for looking!](userimages/customs/48000/47690-1.jpg) Movie Style Metallo D.C. Universeby ShinobitronI came across my old custom Metallo figure when I was going thru my boxes. I was really happy with the way the original one came out but felt that it...16 comments | ![[Chromia] What started as a minor mod quickly turned into a heavy project as I used 5 different figures to make Chromia.
The figure was originally to be a basic repaint with a head swap but I took it the hard route and ended up with what you see before you.
Chromia is made from:
Masito bike, PCC Skyburst, Mars Assault robot chest, Mars Marine forearms, and a Thunderblast.
She was painted to look like a mix of her G1 and Movie versions.
Thanks for checking her out,
Shinobi](userimages/customs/48000/47567-1.jpg) Chromia Transformersby ShinobitronWhat started as a minor mod quickly turned into a heavy project as I used 5 different figures to make Chromia.
The figure was originally to be a basi...4 comments |
![[Tank (Gobots)] Just like Cy Kill this guy comes from my fodder bin. Had fun making my last Gobot so after looking thru archives of the different characters (mainly the ones I had growing up) I found a suitable body for Tank.
I used the Cybertron Scattershot as my base with a Skybite missile launcher merged with Powerglide missiles to make the gun turret. Using a random head and gun from my fodder bin I finished up the parts.
After some modifications to make the new head and turret fit he was reapinted to make Tank (well a homage version of Tank anyway).
Thanks for looking,
Shinobi](userimages/customs/47500/47388-1.jpg) Tank (Gobots) Transformersby ShinobitronJust like Cy Kill this guy comes from my fodder bin. Had fun making my last Gobot so after looking thru archives of the different characters (mainly ...2 comments | ![[Klaw Fantastic Four World's Greatest Heroes Style] Here's another figure I had sitting for months. After watching Fantastic Four: World's Greatest Heroes series for the umpteenth time, I searched for this guy in my bin of backburner customs and got to work finishing him up.
Head: HML Klaw
Base: DCUC Manhunter (filled in holes with sculpt)
Left Hand: HML Klaw
Robotic Hand: 200x Man at Arms
Sonic Weapon: HML Klaw
Lower Legs: DCUC Commander Steel
Accessories: Random plastics
Then came the usual prepwork and then a full new paintjob. I'm pretty pleased with how this guy came out, I should've got him done earlier, lol.
As always guys, Thanks for looking!](userimages/customs/47500/47304-1.jpg) Klaw Fantastic Four World's Greatest Heroes Style Marvel Legendsby ShinobitronHere's another figure I had sitting for months. After watching Fantastic Four: World's Greatest Heroes series for the umpteenth time, I searched for ...21 comments |
|