![[Droid Commando-Sniper] More droid goodness!!!
Basically the same recipe as the last two, however this guy was created more for a sniper role.
As you can see, he gets his own fancy rifle and his own comm pack-making him into a fast moving, elite sniper.](userimages/customs/14000/13558-1.jpg) Droid Commando-Sniper Star Warsby Mr-XMore droid goodness!!!
Basically the same recipe as the last two, however this guy was created more for a sniper role.
As you can see, he gets his o...0 comments | ![[Droid Commando Commander] I decided to go further with my previous battle droid figure and make the commander variant.
Basically the same recipe as before, but with rank marks and a vibrosword.](userimages/customs/14000/13557-1.jpg) Droid Commando Commander Star Warsby Mr-XI decided to go further with my previous battle droid figure and make the commander variant.
Basically the same recipe as before, but with rank marks...0 comments |
![[Darth Vader] Because I just had to make one!!!
Here's my Sigma 6 style, 9 inch, Darth Vader v1!!!
Head is from a Pez container, cape is real cloth and the lighstaber has been hollowed out to make the blade removeable(plus it still has the clip to attach to just about anywhere on his body)
And I say v1 because v2 is currently in the WIP stages and he will be rocking a different body and a removeable helmet
Fun times, enjoy!!!](userimages/customs/13500/13455-1.jpg) Darth Vader Star Warsby Mr-XBecause I just had to make one!!!
Here's my Sigma 6 style, 9 inch, Darth Vader v1!!!
Head is from a Pez container, cape is real cloth and the lighst...0 comments | ![[Behind Enemy Lines] This is my first complete diorama-featuring a paratrooper caught behind enemy lines.
The base is a pictures frame, the rocks made from plaster of paris and the figure, weapons and glider are from some cheap GI Joe line.
Enjoy!](userimages/customs/13500/13138-1.jpg) Behind Enemy Lines Dioramaby Mr-XThis is my first complete diorama-featuring a paratrooper caught behind enemy lines.
The base is a pictures frame, the rocks made from plaster of par...0 comments |
![[Hulkbuster Deadpool] OH NOES, I've GOT THE DEADPOOL FEVER!!!
But seriously, I finally decided to make some form of Deadpool...and it was fun! I very much enjoyed making him in some form other then the one everyone see's a zillion times, in fact I may make more variants!
Anyhow, here he is, ready to take on the Hulk!](userimages/customs/13500/13137-1.jpg) Hulkbuster Deadpool Marvelby Mr-XOH NOES, I've GOT THE DEADPOOL FEVER!!!
But seriously, I finally decided to make some form of Deadpool...and it was fun! I very much enjoyed making h...2 comments | ![[Droid Commando] My first 3.75 inch custom!
Made from a Phantom Menace Battle droid, he's been retooled to look like one of the Commando droids from the new Clone Wars animated series.](userimages/customs/13500/13136-1.jpg) Droid Commando Star Warsby Mr-XMy first 3.75 inch custom!
Made from a Phantom Menace Battle droid, he's been retooled to look like one of the Commando droids from the new Clone War...0 comments |
![[Anbu] Made this guy a while ago, but hadnt gotten around to posting him.
I wanted to make another ANBU, but this time in a 12'' form.
The base figure,Cid, was given a major rehaul. His hair has been resculpted, repainted and he has been given face tattoos. The mask is made completly out of Super Sculpey, sized, hardened and painted. His jumpsuit was cut back to back to look appropriate and was repainted black. The white was was done completly from scratch, sized and then put in place.
His hands were painted black to appear like gloves and a plastic square was put on each and then painted to look like metal. The rest of the gloves were sized, cut and sewen to make the rest of the gloves and then had velcro added. The armor plates were originally alluminium gutter pieces, cleaned, cut down, bent, sized, painted and then attached to the other piece of velcro to make them dettachable.
His kunai pouch is an old 12'' ammo holder and the bandages were down using velcro pieces and strips of a wh](userimages/customs/12000/11793-1.jpg) Anbu Narutoby Mr-XMade this guy a while ago, but hadnt gotten around to posting him.
I wanted to make another ANBU, but this time in a 12'' form.
The base figure,Cid,...0 comments | ![[Alien Hybrid] Pretty much self-explanitory, lol](userimages/customs/11000/10587-1.jpg) Alien Hybrid |
![[Mandalorian Soldier] A fun figure to make, I really like how this guy turned out.
Started off as a Sigma Six Duke figure. His new helmet was once the top of a Pez Despenser, now hollowed out and repainted.
Every part of his body, except his head and lower legs hhs been repainted.
His right arm got the gauntlet/gun piece-its from a 12'' FF figure, screwed on, gap filled with glue, painted black and then drybrushed with silver.
His rifle is froma Sigma Firefly figure and the barrel has been modified to allow the the blade to slide on and off while fitting snugly on. With the nice thing with Sigma bodies, his gun can snap into one of the holes on his back.
His holsters(and following vest) is all removeable and the pistols fit nicely into them.
A fun piece to do, I'm really liking how he turned out!](userimages/customs/11000/10511-1.jpg) Mandalorian Soldier Star Warsby Mr-XA fun figure to make, I really like how this guy turned out.
Started off as a Sigma Six Duke figure. His new helmet was once the top of a Pez Despens...3 comments | ![[U.B.C.S Soldier] Because you can never have enough UBCS soldiers!!! lol
This guy started off as a 12'' Storm Shadow figure I got from Target.
He got his shirt and head repainted black and a pair of goggles that I got from Chancellor and I kept the boots and knife from the original figure.
Also kept the arm tattoo to give him a little individuality.
He exchanged clothes with another 12'' figure, got kneepads and a holster/pistol.
The vest itselft was repainted black and the UBCS symbol was ironed on-It accidently turned a bit black but I kept that on to give it a kind of worn and dirty look.
Finally, he got his SMG from a Sigma figure, which was repainted black.](userimages/customs/11000/10510-1.jpg) U.B.C.S Soldier Resident Evilby Mr-XBecause you can never have enough UBCS soldiers!!! lol
This guy started off as a 12'' Storm Shadow figure I got from Target.
He got his shirt and he...0 comments |
![[Dieter Stark] Any Jurassic Park/Lost World fans probably remember this guy!
He taught us-don't harass little animals, and don't wander away from the group, stupidly drop your gun and then continues to wander away screaming at the top of your lungs.
But anywho, I've always wanted a better figure of him, even before I came across the Realm. He became one of those-well, id like too but not right now kinda things.
It just happened one day I found the perfect head and viola, fun times!
Enjoy, I'm sure pleased with the turnout!](userimages/customs/8500/8264-1.jpg) Dieter Stark Jurassic Parkby Mr-XAny Jurassic Park/Lost World fans probably remember this guy!
He taught us-don't harass little animals, and don't wander away from the group, stupidl...0 comments | ![[Super Soldier] Found this fodder/figure at a flea market, took him home and let my imagination run wild!](userimages/customs/8500/8263-1.jpg) Super Soldier Originalby Mr-XFound this fodder/figure at a flea market, took him home and let my imagination run wild!...1 comments |
![[The Dark Man] An original idea I had one day.
Pretty much just a badass with a sword, ha](userimages/customs/8500/8262-1.jpg) The Dark Man | ![[Mr.X-Resident Evil Tyrants] A fun shot at making some Tyrant baddies
Good use of fodder too IMO, lol =]](userimages/customs/8500/8261-1.jpg) Mr.X-Resident Evil Tyrants |
![[Puppet Master] Basically an original idea I felt like giving a go...lol
DCHSH Sacrewcrow, new arms, new feet and two spiffy chainsaw extensions.](userimages/customs/7000/6861-1.jpg) Puppet Master Originalby Mr-XBasically an original idea I felt like giving a go...lol
DCHSH Sacrewcrow, new arms, new feet and two spiffy chainsaw extensions....1 comments | ![[Salamandar Hanzou] Based on the character "Hanzou" from the Naruto series/manga, he was a fun figure too do!
He only appears in two chapters of the manga (and in flashbacks), but I liked him allot, so here we are.
Base is an XMC Wolverine and resculpted.
Head was sanded down and re-sculpted to give him that sweet gas mask of his. The claws on his hands were also taken off and filled in.
New paint job and a spiffy coat and we have Hanzou!](userimages/customs/7000/6860-1.jpg) Salamandar Hanzou Narutoby Mr-XBased on the character "Hanzou" from the Naruto series/manga, he was a fun figure too do!
He only appears in two chapters of the manga (and...1 comments |
![[SS Doomtrooper] Anyone whos ever seen a Sci-Fi orignal movie knows how crappy they usually are. Once and a while, they have a decent one with good actors but most of the time they arent that great. Well, SS Doomtrooper wasn't that great but I liked the concept of the monster thing.
For those unfamiliar with the movie, it takes place during WWII. The whole plot revolves around a group of outcast soldiers sent to destroy a Nazi Lab thats mutating men into these huge Hulk like things that come out with great strength, a pretty nifty healing factor and the ability to absorb/eject electricity through their hands. Corny yes, but the monsters looked pretty sweet.
Anyhow, not too hard here, mostly a repaint with a little sculpting.
Head got a sculpted helmet onto it, painted flat black first then drybrushed with that nifty metallic color.
Body was painted a combo of blue and grey and the gloves and pants were done with flat black.
Again, not too hard but I think he's pretty cool.
Thanks to Hakweye for](userimages/customs/6500/6138-1.jpg) SS Doomtrooper Originalby Mr-XAnyone whos ever seen a Sci-Fi orignal movie knows how crappy they usually are. Once and a while, they have a decent one with good actors but most of ...3 comments | ![[Sakura Haruno-Time Skip] So in keeping with my Naruto characters, I had to do a Sakura figure-time skip edition.
Body is from a WWF figure I believe I recieved from Bob-a-Ferret. Head on the other hand is from an XMC Rogue figure.
New hair was sculpted on as were the cuffs for the gloves.
I made three changes to the overall character. One, I left the demon tattoo on her right arm, mostly because it would have been such a pain to take off and I don't think it looks too bad. Two, I didn't put the elbow pad things she wears in the timeskip. I didn't want to just paint them on and I didn't want to fool around with finding something that would fit over the elbow joint, again I think she look sbetter without them. Three, I made a change to the skirt and the shirt. Normally it goes all the way around but after several attempts I decided it wasn't worth it. I kept the skirt idea but trimmed and tweeked it around so it would be less of a pain. The new skirt is some GI Joe cape and is removeable, via a small peg. Th](userimages/customs/6000/5802-1.jpg) Sakura Haruno-Time Skip Narutoby Mr-XSo in keeping with my Naruto characters, I had to do a Sakura figure-time skip edition.
Body is from a WWF figure I believe I recieved from Bob-a-Fer...4 comments |
![[Disturbed Mascot -"Mr. Smiley"] After seeing Shinobitron's Disturbed figure way back when I knew I wanted to try my hand at him someday. Unfortunetly he got tossed on the backburner and was left there...until now.
Base Body was from a WWF figure I got a while ago from ratboy and the head was from another WWF figure, previously on my "Axeman" custom.
The head was COMPLETLY dremeled down and rebuilt with SS, new eyes and mouth. The torn clothing, neck band, boots and other little things on the body were also sculpted on.
The hood was from a Hobgoblin, which I shaved down a little and decided to use here. I tried gluing it on first but the glue I have currently isnt that great so I shot a small screw in and called it a day.
Boots were done with flat black, all metal bands done with that nice metal tone, head in flat black, eyes in red, teeth in white and clothes were done with a combination paint of grey and black mix.
I'm rather pleased with how he turned out, the only thing I think I would change is t](userimages/customs/6000/5801-1.jpg) Disturbed Mascot -"Mr. Smiley" Disturbedby Mr-XAfter seeing Shinobitron's Disturbed figure way back when I knew I wanted to try my hand at him someday. Unfortunetly he got tossed on the backburner ...1 comments | ![[HUNK-RE2 Costume] After seeing Pyramidhead22's HUNK figure, I knew I had to get the ball rolling and finish mine.
Orinally a mix of different pieces and parts, they came together to form HUNK.
The head has been COMPLETLY resculpted. The gas mask filter is from a pen cap and the two tanks are two lego pieces. The rest of the mask and helmet were done with Super Sculpty, the grroves made with my Xacto blade and the nubs on the helmet done with the end of an axe piece. Painted flat black, the bottom part of the helmet wa spainted grey, the nubs flat red, the eye pieces flat black and then given a gloss red circle.
The only other sculpted parts are the body armor pieces. Done with SS, they were shaped with my Xacto blade and the wrinkes were added with the edge of the blade. They were furthermroe painted flat black.
The res tof the body was then given several coats of grey until I got the perfect grey fatigue color.
All and all, not too many steps but the ones I had to take took some time to do.
In th](userimages/customs/4500/4478-1.jpg) HUNK-RE2 Costume Resident Evilby Mr-XAfter seeing Pyramidhead22's HUNK figure, I knew I had to get the ball rolling and finish mine.
Orinally a mix of different pieces and parts, they ca...5 comments |
![[Barry Burton] TMB wanted to see a Barry figure made so I decided to give it a go.
For as good as he turned out he wasn't really that difficult. Don't ask me whos body parts he was made out of though, all I know is the head is from Kevin Nash.
First off, new head on the body. New hair sculpted and the beard and hair were repainted brown.
Next the vest was scupted over the previously bare chest. The revolver is from a Sin City Manute and the holster is from an XMC Stealth Gambit. The newly sculpted straps and pouches were painted brown while the vest was first painted red then drybrushed with red/brown.
Pants got new pockets on each leg and then were repainted flat black.
Final step was giving him the white sleeves and then putting on the annoyingly hard STARS symbol(which I still f-ed up but I think it looks pretty good).
I'm pleased with how he came out. Good to see I'm finally starting my STARS team lol.
Enjoy!!!](userimages/customs/4500/4477-1.jpg) Barry Burton Resident Evilby Mr-XTMB wanted to see a Barry figure made so I decided to give it a go.
For as good as he turned out he wasn't really that difficult. Don't ask me whos b...8 comments | ![[Rogue-Xmen Evolution] Wanted to make a Rogue for some time now, just never really cared for most of her outfits. I liked the Evolution one the best however so I decided to do that one using one of my WWF Sunny figures I got from the shop here.
First off, I dremeled down the hair ALLOT. I made it much shorter, sculpted the front bangs then repainted it. A little purple was added above both eyes and the lips were redone in purple. I also sculpted the collar around her neck.
Her top was originally white and got repainted black and her hands were redone with flat black to give the appearence shes wearing gloves. I also sculpted new buckles on her boots and painted them green.
The most difficult part was her netting of course. All of it is removeable and made out of this netting material that usually holds things like marbles, etc. All of it was fitted around her body and then I cut off small pieces of twisty ties, put them through the right hols in the material and twisted them closed so they stayed the righ](userimages/customs/4500/4476-1.jpg) Rogue-Xmen Evolution X-Menby Mr-XWanted to make a Rogue for some time now, just never really cared for most of her outfits. I liked the Evolution one the best however so I decided to ...7 comments |
![[Alpha Hunter] Just a simple custom for an original Hunter unit, pretty old, I've had him sitting around for a while now and I thought id post him.
Basically just an XMC Gambit.
Sculpted a crude mask over the face and painted it black then drybrushed it grey.
Cahnged the right arm, repainted the "exhaust" part gunmetal and repainted the other arm black.
Simple but not too bad.
Enjoy!!!](userimages/customs/4500/4475-1.jpg) Alpha Hunter Originalby Mr-XJust a simple custom for an original Hunter unit, pretty old, I've had him sitting around for a while now and I thought id post him.
Basically just a...4 comments | ![[Nobody] An original figure once again.
I wanted to create an original figure capable of controlling shadow and darkness, kinda like Ebon from the Static Shock cartoon. What resulted was the character I named "Nobody". A tragic hero, who in a moment of weakness, gave into his own inner darkness and despair and became consumed by it. He essentially became a living avatar of darkness and shadow. Never aging or truly dying, he never really lives either, he's simply shadow that thinks and exists, doomed to wander the reaches of space until salvation comes.
Basically just a heavily modified Mr. Fantastic figure. The whole body, including the head is from the original figure. The head and neck both contain magnets so his head is able to come off of his body(he's a shadow, not like its gonna hurt LOL)
Chest 4 and his face was dremeled down and he got a new hairstyle, later painted white with red eyes.
Arms are from a movie GR, don't ask me which one.
Paintjob is pretty simple, base coat](userimages/customs/4500/4302-1.jpg) Nobody Originalby Mr-XAn original figure once again.
I wanted to create an original figure capable of controlling shadow and darkness, kinda like Ebon from the Static Shoc...1 comments |
![[UBCS Soldier-Movie Appearence] Even though I dislike allot of the plot of the RE movies(seriously the main character has superhuman strength and telekenesis...WTF?!?) I liked certain aspects of it. One of the things I like is in a way the characters seem more real(well except for Alice)-The characters arent running through an infected city in the brightest clothes they can find for one. I liked both the games version of the UBCS and the movies-both had good points so why not make both? I've already done the games version(based on their appearence in the Outbreak games) so now I thought id do their movie version.
Bare in mind, the actual character is original, I just put him in the movies colors and style(ya won't see him in the movie LOL)
Really not a hard custom, though their was quite a bit to be done.
Upper torso and head are all from a WWF "The Coach" figure. The whole chest has been redone and has had a vest sculpted on and then painted. The head, which was originally bald, was given hair and pain](userimages/customs/4500/4254-1.jpg) UBCS Soldier-Movie Appearence Resident Evilby Mr-XEven though I dislike allot of the plot of the RE movies(seriously the main character has superhuman strength and telekenesis...WTF?!?) I liked certai...7 comments | ![[Female Hunter-Pack Hunter] Another original Hunter figure with Predator armor in mind.
Original figure was a Witchblade figure provided to me by Dr Nightmare and a Pyslocke head from Shins.
Retooled the head to fit the body then sculpted a crude but pretty cool mask.
Armor pieces and pouches added to the body and the grooves were done with toothpicks like before.
The original Witchblade armor got a new color-black and the pouches, armor and mask were hit with new colors.
Like before, the gauntlet is removeable and snaps on and off.
A semi quick project but IMO pretty cool, a fine addition to my 6 inch hunting pack.
Enjoy!!!](userimages/customs/4500/4173-1.jpg) Female Hunter-Pack Hunter Predatorby Mr-XAnother original Hunter figure with Predator armor in mind.
Original figure was a Witchblade figure provided to me by Dr Nightmare and a Pyslocke hea...7 comments |
![[Female Hunter-Pack Leader] Had this figure from Punstarr sitting around and I couldnt decide what I wanted to do with her. That is, until I found some cool concepts for emale hunters in Predator style armor. Using this as loose reference, I made my own armor style and gave it my own coloring and this is what ya get:
Most of the work done here was sculpting the new armor.
All of it was done with Super Sculpty, the grooves done with a toothpick.
She was then repainted with the colors I saw fit, both her original garb and her new armor.
The wrist blades on her right arm are removeable, the whole right gauntlet snaps on and off.
Not to difficult but I think she looks awesome. The original figure is shown in the last pic as a comparison.
Enjoy!!!](userimages/customs/4500/4172-1.jpg) Female Hunter-Pack Leader Predatorby Mr-XHad this figure from Punstarr sitting around and I couldnt decide what I wanted to do with her. That is, until I found some cool concepts for emale hu...2 comments | ![[Ravager-Apprentice Armor] To go along with my terra figure, I decided to make Ravager, daughter of Deathstroke the Terminator/Slade.
Again I followed fanart for her armor(I really hate that pirate suit).
Like Terra, she wasn't to hard but more time consuming for all the sculpting. Used the Iron Fist head because it was already cloe to a Deathstroke esque mask. Just painted one side black and the other orange.
All the armor plates were sculpted on, including the outline of her top(which was a pain because of its size). The armor itself was then given the grey cover, pants and top black and everything else blue, slightly darker then my reference but stil pretty cool IMO.
The final touch was her braid of hair which came from modding a piece of a LOTR Legolas figures hair.
All and all a fine addition to my DC fighters-hopefully ill have Slade done soon.
Enjoy!!!](userimages/customs/4000/3695-1.jpg) Ravager-Apprentice Armor Teen Titansby Mr-XTo go along with my terra figure, I decided to make Ravager, daughter of Deathstroke the Terminator/Slade.
Again I followed fanart for her armor(I re...1 comments |
![[Terra-Apprentice Armor] I always though the character of Terra(animated version) was an interesting idea. She wasn't really evil like her comic counterpart, just mislead and lost. So I decided I wanted to make her as a custom. I have two versions planned, one being her armor from the actual show and this version, a fanart of her in armor, this one I like more so I did it first, to me she looks more like Slades apprentice.
No real changes here, no fancy dremeling or anything like that. Just some sculpting and repainting.
As you can see, X-23 got a makeover though. Hair was painted blonde and she was painted gloss black with grey on the suits bands and other protruding parts.
The only sculpting came in the form of her armor plates and her neck collar thing. Plus I also made her chest more defined. Not incredibly hard but I think they turned out well.
A real pain in the butt to stand but I think she looks great. I guess small changes really can make a big difference.](userimages/customs/4000/3694-1.jpg) Terra-Apprentice Armor Teen Titansby Mr-XI always though the character of Terra(animated version) was an interesting idea. She wasn't really evil like her comic counterpart, just mislead and ...6 comments | ![[Punisher] This guy here was a custom-esque piece for Ratboy.
He let me have full creative choice on making a Punisher for him so I wanted to try a different approach on Frank, instead of the ML style clothing, head, etc.
Pretty simple though. Mr. Fantastic body with ML Angel arms.
Head was slightly redone and more hair was added.
I added pouches on his pants, more straps on his torso and gave him a belt, made out of foam pieces. I tried to keep my reference pic in mind when I did the skull and made it look crude, like he had just painted it on quickly.
He sports two weapons, his assualt rifle and the knife(also has its own place on his belt)
Not a hard custom, but I think it turned out pretty well.](userimages/customs/4000/3693-1.jpg) Punisher Punisherby Mr-XThis guy here was a custom-esque piece for Ratboy.
He let me have full creative choice on making a Punisher for him so I wanted to try a different ...5 comments |
|