![[The Riddler] This was done a while ago, I just completley forgot to post it over here! Made from a ML Prof.X repainted w/ a sculpted hat. The cane was made from an extra staff from a Gambit figure that I cut down and sculpted the question mark on top. Pretty simple job that I'm pretty pleased with. I also did a Batman, but I think I'm going to redo the symbol on his chest as I know I can make it better, so stay tuned for that soon!
As always comments and critiques are welcome
Thanks!](userimages/customs/7000/6949-1.jpg) The Riddler Batmanby EnigmaThis was done a while ago, I just completley forgot to post it over here! Made from a ML Prof.X repainted w/ a sculpted hat. The cane was made from ...1 comments | ![[Iceman] So I got the Marvel Legends Iceman (series 8?) a while back when I saw it at this collectors store. Well I got home and opened it up and was a bit disappointed. I really did not like the body on him at all, and also thought it would look better with a different paint job.......so decided to make my own! The body is that of ML Gambit and the legs and head are from Iceman. I sculpted the belt w/ the buckle gave it a base coat of icy blue and drybrushed him white, which I really think gave it a cool effect. I am much happier with this new Iceman.....Thanks for checking him out!](userimages/customs/6000/5676-1.jpg) Iceman Marvel Legendsby EnigmaSo I got the Marvel Legends Iceman (series 8?) a while back when I saw it at this collectors store. Well I got home and opened it up and was a bit di...4 comments |
![[Storm] I've always liked Storm's look from the 90s. I guess its because thats when I was first introduced to the X-Men when I was but a wee child.......ANYWAY this was just a repaint of ML Storm. Quick and Easy, but still satisfying. Thanks for checking it out!](userimages/customs/6000/5578-1.jpg) Storm Marvel Legendsby EnigmaI've always liked Storm's look from the 90s. I guess its because thats when I was first introduced to the X-Men when I was but a wee child.......ANYWA...1 comments | ![[The Vulture] Finally got this guy finished! Had been sitting at my desk for a long time waiting to be completed......anyway, The vulture was made from the Falcon w/ some sculpting done over most of the body. I thought the falcon was a little too muscular to be the body of an old man, but the height was good not to mention the wings! After the sculpting just a repaint w/ some drybrushing here and there. The cowl is from Baron Zemo and the head came from Bullseye. I like how it turned out, and its always a plus to add some more villians for Spiderman!](userimages/customs/6000/5532-1.jpg) The Vulture Marvel Legendsby EnigmaFinally got this guy finished! Had been sitting at my desk for a long time waiting to be completed......anyway, The vulture was made from the Falcon w...4 comments |
![[The Lizard] This is one of my favorite projects so far! I've always wanted a good Lizard, so I figured I'd take a crack at making one myself. the base was a ML Blackheart. I sculpted over the top part of his chest to simulate a shirt, as well as sculpting his pants. I also completly sculpted the tail. the coat was originally Taskmaster's cape, but I cut some holes in it so the arms could fit through (sadly this caused a little arm articlulation to be lost, but I don't mind). the head is from an old Spiderman Classics figure base! After that the paint job, and there you have it! I'm pleased with the way this came out. Thanks for looking!](userimages/customs/4500/4410-1.jpg) The Lizard Marvel Legendsby EnigmaThis is one of my favorite projects so far! I've always wanted a good Lizard, so I figured I'd take a crack at making one myself. the base was a ML B...8 comments | ![[Kingdom Come Superman] This was another simple one. first off,I'd like to say that I have seen this recipe before, and thanks to the guy who first did it for the inspiration( and sorry for not remembering your name)! Just a repaint w/handpainted symbol. I like it! As always, comments and critiques are welcome
Thanks for looking!](userimages/customs/4500/4334-1.jpg) Kingdom Come Superman Kingdom Comeby EnigmaThis was another simple one. first off,I'd like to say that I have seen this recipe before, and thanks to the guy who first did it for the inspiratio...0 comments |
![[Kingdom Come Flash] This was basically a repaint of Quiksilver w/ a sculpted helmet and wings from ML Asgardian's helmet. I think it came out pretty well, but I'm thinking about redoing it one day since I think I can do better!
Thanks for Looking!](userimages/customs/4500/4333-1.jpg) Kingdom Come Flash Kingdom Comeby EnigmaThis was basically a repaint of Quiksilver w/ a sculpted helmet and wings from ML Asgardian's helmet. I think it came out pretty well, but I'm thinki...0 comments | ![[Arcade] This was originally the Dracula from the Marvel Monster Box Set, repainted the proper colors. I sculpted the bow tie using fixit sculpt. The head is a Joker Headcast from Black Arachnis (Thanks a ton man!!). I think that it turned out pretty well. I'm also finally getting pictures that I am 100% happy with!](userimages/customs/4500/4055-1.jpg) Arcade Marvel Legendsby EnigmaThis was originally the Dracula from the Marvel Monster Box Set, repainted the proper colors. I sculpted the bow tie using fixit sculpt. The head is ...4 comments |
![[Harvey Birdman] This was a fun one to make. I took the DCSH Clark Kent, which had just about the exact colors of Birdman's suit, added some wings from a Hawkman, and sculpted the mask/headpiece. Not to hard, but I think it came out pretty nicely!!](userimages/customs/4000/3647-1.jpg) Harvey Birdman DC Superheroesby EnigmaThis was a fun one to make. I took the DCSH Clark Kent, which had just about the exact colors of Birdman's suit, added some wings from a Hawkman, and...6 comments | ![[Daredevil---Yellow] Well here is Daredevil in his yellow (AKA the color of the beast) costume like his first appearance. The head is from an old Spiderman Classics (I think) Daredevil. The nunchucks are from moonknight, and the boots are from a X-men Stealth Cyclops. Besides that I just repainted yellow were it needed to be, painted black and drybrushing red where that had to go, as well as adding the D on his chest. Overall I think it turned out pretty well.... good enough for me anyway! However, the one thing I am not as pleased about is the picture quality. I know they aren't horrible, but if anyone commenting could maybe suggest some ways to improve them it would be greatly appreciated.
Thanks!](userimages/customs/4000/3507-1.jpg) Daredevil---Yellow Marvel Legendsby EnigmaWell here is Daredevil in his yellow (AKA the color of the beast) costume like his first appearance. The head is from an old Spiderman Classics (I thi...4 comments |
![[Ult. Wolverine-Steel Claws Mod] Pretty simple..........just the Steel Claws modification on Ultimate Wolverine. I followed Kyle's tutorial. Unfortunatley, I didn't have a dremel bit small enough for one of the steps, and ended up stabbing my finger a couple of times with an x-acto knife, but the end result was worth it.](userimages/customs/3500/3499-1.jpg) Ult. Wolverine-Steel Claws Mod Marvel Legendsby EnigmaPretty simple..........just the Steel Claws modification on Ultimate Wolverine. I followed Kyle's tutorial. Unfortunatley, I didn't have a dremel bit ...3 comments | ![[GL Red Skull] One day the Guardians of the Universe discovered a rip in the Multiverse. This resulted in the discovery of a new alternate Earth. This Earth, dubbed Earth-616, was home to the Marvel Universe. The Guardians felt that, like any other planet, this one needed its own Green Lantern. There were many powerful and noble heroes on Earth-616 but one stood a cut above the rest.........Captain America.
The year was 1945, and WWII was in full swing. Captain America was stationed in Europe, fighting Nazi scum wherever he found it. During one intense battle with his archnemesis, the Red Skull, Captain America was knocked out. Not realizing their poor timing, the Guardians of the Universe sent the power ring meant for Captain America to Earth. Upon seeing this bizarre space object, the Red Skull grabbed it, putting on the ring. Normally a ring could not work for such an evil man, but the Skull's shear willpower prevailed and he took control of the ring. Gaining incredible cosmic powers (as well as](userimages/customs/3500/3327-1.jpg) GL Red Skull Marvel Legendsby EnigmaOne day the Guardians of the Universe discovered a rip in the Multiverse. This resulted in the discovery of a new alternate Earth. This Earth, dubbed ...7 comments |
![[Multiple Man] When I saw the Bullseye body it was just screaming Multiple Man, and considering the leg had broken off I figured while reataching it I'd do a few more modifications! Basically all I did was a repaint, adding the costume deatails as well as dry-brushing it with blue. The head came from the Electro from the Sinister Six gift pack.....which was left over from the spiderman 2099 figure I submitted a while back. The jacket is from a Gambit figure. I'm pretty please with the job that I did.
Enjoy!](userimages/customs/3500/3172-1.jpg) Multiple Man Marvel Legendsby EnigmaWhen I saw the Bullseye body it was just screaming Multiple Man, and considering the leg had broken off I figured while reataching it I'd do a few mor...7 comments | ![[Ultimate Deadpool] It seems as though everyone must do a Deadpool at one point, but in this case I chose to do something a little different and go with the Ultimate version of Deadpool like he appeared in Ultimate Spiderman, which I'm a little surprised I haven't seen. In the ultimate universe, Deadpool hunts mutants on a reality show!
This figure wasn't too hard to make. I figured after using my Moon Knight's cape for the hobgoblin I submitted I'd make deadpool. I basically just repainted him as well as adding the boot and glove details. I made the mask by drawing it on with a permanent sharpie marker. The knife came from Kraven the hunter and the gun was from some random Star Wars guy. I think it came out pretty good.
Enjoy!](userimages/customs/3500/3148-1.jpg) Ultimate Deadpool Marvel Legendsby EnigmaIt seems as though everyone must do a Deadpool at one point, but in this case I chose to do something a little different and go with the Ultimate vers...9 comments |
![[Anung Un Rama- Hellboy] In an attempt to turn the tides of WWII the Nazis created a portal into Hell to summon the Devil. However, this attempt resulted with a small demon child with a mysterious stone hand to appear. Dubbed Hellboy by Professor Trevor Bruttenholm he is "the world's greatest paranormal detective!"
Later it was revealed to him that the large stone hand he was born with was the Right Hand of Doom, a key to be used to bring the Apocalypse! It is also revealed that his true name is Anung Un Rama
This is Hellboy in his full, demonic form. I sculpted the Right Hand of Doom as well as the hooves and facial hair(my first major sculpting work!). The horns came from a ML Loki and his flaming crown is from a ML Vengence's flaming hair repainted and held up by one of those packaging things(?). Besides that it was a repaint of the Hulk from green to red. I'm pretty pleased with the way it turned out
Enjoy!](userimages/customs/3500/3056-1.jpg) Anung Un Rama- Hellboy Hellboyby EnigmaIn an attempt to turn the tides of WWII the Nazis created a portal into Hell to summon the Devil. However, this attempt resulted with a small demon c...8 comments | ![[Hobgoblin] Finally found the time to do another custom. This is basically just a repaint of the Green Goblin with some modifications so it could fit into the cloak (from ML Moon Knight). I also had to modify the cloak so the Hobgoblin's whole head would fit into it, and it is held onto him by a piece from ML Sinister's cape.
Enjoy!](userimages/customs/3000/2960-1.jpg) Hobgoblin Marvel Legendsby EnigmaFinally found the time to do another custom. This is basically just a repaint of the Green Goblin with some modifications so it could fit into the clo...1 comments |
![[Spiderman 2099] Spiderman 2099! This was a repaint of Electro, adding the stripes on the arms. I never liked the logo on his chest, so I decided to make a spider on his chest instead out of some clay I had around. The head was taken from a different Spiderman 2099 figure.
This is my first custom, and I plan on making more in the future.](userimages/customs/2000/1510-1.jpg) Spiderman 2099 Spider-Manby EnigmaSpiderman 2099! This was a repaint of Electro, adding the stripes on the arms. I never liked the logo on his chest, so I decided to make a spider on h...6 comments | |
|