![[Red Hood-Pool] Just kidding, it's really my Deadpool 3.0, I'm just having WAY too much fun with these magnetic interchangeable heads. Red hood will be displayed at a later time.
I borrowed some of the ideas from ColeTheCreator because I really like the way his looks.
Recipe:
Lower legs: TDK Batman and some ML guy.
Everything else but the head: ML Bucky Cap
Red Hood head: ML Mon Knight
Deadpool Heads: Castings by CK.
Thanks for looking and being a part of my little prank. Happy customizing!](userimages/customs/51000/50842-1.jpg) Red Hood-Pool Marvel Legendsby Delta TJust kidding, it's really my Deadpool 3.0, I'm just having WAY too much fun with these magnetic interchangeable heads. Red hood will be displayed at a...2 comments | ![[Cablepool (It Soiunds Better than Dead-Nate)] This is one of my favorite incarnations of Deadpool. I still tear up when I read this issue Because Nate was there too...
The recipe is pretty straightforward:
Everything but the head and hands is either HML Union Jack or HML Quicksilver which is basically the same figure anyway.
Head: ML Moon Knight with sculpted hair.
The hands, swords and scabbards is from a TMNT Foot Soldier.
The pouches and straps are a combination of WW2 Capt. America, ML Bullseye, rubber bands and fodder. The bandages are Teflon tape and the shoulder pad is from LCBH Judge Dredd.
I hope that one day I will have the patience to make a stand with a bunch of "Pedex" boxes, but time will tell.
Update: I've since made his left eye gold and more Cable-like as well as painting the toe-toppers black. I'll eventually get around to posting updated pics.
Thanks for looking!](userimages/customs/50500/50144-1.jpg) Cablepool (It Soiunds Better than Dead-Nate) Marvel Legendsby Delta TThis is one of my favorite incarnations of Deadpool. I still tear up when I read this issue Because Nate was there too...
The recipe is pretty straigh...2 comments |
![[X-Force Deadpool] I know, another Deadpool submitted past the prime of his popularity with the particular incarnation. Long story short, I had CK do a cast for me, I deployed and by the time I came back The ML factory version had already come out.
Anyways.
Recipe:
Head and hands: CK cast
Body, thighs, knees upper shins: ML Quicksilver or Moon knight or whoever.
Lower shins: MM Batman
Arms: X-Men Movie Wolvie
Feet: XMC Magneto
Sculpted the harness and belt buckle
Anyway, Thanks for looking.](userimages/customs/50000/49879-1.jpg) X-Force Deadpool Marvel Legendsby Delta TI know, another Deadpool submitted past the prime of his popularity with the particular incarnation. Long story short, I had CK do a cast for me, I de...0 comments | ![[Lady Deadpool] Hey guys, I made this one for my best friend Brian (See the Bruno Rex custom... in fact most of my Deadpool customs were made for him.) who is the biggest Deadpool fan I know personally. I am super Excited with the way this one came out and I might be keeping this one for myself (Sorry Brian).
One of the Lady Deadpool's on here Used a She Spawn for the head. I looked through all the Lady Deadpool's on the Realm here and I couldn't find it. Whoever it was, mad props to you, it was a great Idea and worked out great despite my initial reluctance.
Recipe:
Head: McF She-Spawn
Body and arms: ML Domino
Upper legs: ML Spider-Woman
Lower legs and feet: ML X-23
Shoulder harnesses are from ML Steve Rogers, Belt and holsters are from ML Domino, Pouches are from DCU Azbat, Magazines (Not clips, clips load from the top like on an M-1 Garand, Magizines load from the bottom) are from ML Movie Punisher, Swords are from a Sin City Miho and the pony tail is from a Shocker Toys figure.
I had a lot of f](userimages/customs/50000/49877-1.jpg) Lady Deadpool Marvel Legendsby Delta THey guys, I made this one for my best friend Brian (See the Bruno Rex custom... in fact most of my Deadpool customs were made for him.) who is the big...2 comments |
![[Batman beyond 2.0] I was super unhappy with my original Batman Beyond custom and I wanted to give him an update. I saw the ROML Constrictor arms and thought they would make perfect batarang launchers. Anyway, I am super happy with the way he came out, I keep him on my desk and think "Man I did a good job" lol. So anyway.
Recipe:
Body, & legs: ML Wally World movie Cyclops.
Arms: ML Constrictor
Heads: Both from DCU, interchangeable via magnets.
Jet thrusters (Not pictured) are from the old Kenner BB and are cut to fit in the holes in his feet.
I sculpted the bat symbol. It isn't perfectly symmetrical the pieces from the belt and all accessories are from the DCU Batman Beyond. I painted him up with some Vallejo glossy black and off we go.
I need to give him some wings but I am stumped. I was thinking maybe some red foam board but I am open to suggestions.
Thanks for looking,comments always welcome :)](userimages/customs/50000/49741-1.jpg) Batman beyond 2.0 Batman Beyondby Delta TI was super unhappy with my original Batman Beyond custom and I wanted to give him an update. I saw the ROML Constrictor arms and thought they would m...9 comments | ![[Azrael 2.0] I wanted to give him a more streamlined look so I used a smaller body. I think the Idea to use the Bullseye style body has been done before for Azrael, but I don't know who the credit goes to. A big shout out to Jin for the idea to use a Kamandi for the JPV head. They are held on by magnets and interchangeable.
Recipe
Body, legs and upper arms: ML Wally World Movie Cyclops.
Head, Lower Arms and cape pieces: DCU Azrael.
Cape: Darth Vader](userimages/customs/50000/49716-1.jpg) Azrael 2.0 Marvel Legendsby Delta TI wanted to give him a more streamlined look so I used a smaller body. I think the Idea to use the Bullseye style body has been done before for Azrael...6 comments |
![[Crossbones] I wanted to get rid of some spare parts so I made Crossbones with them.
Recipe.
Head: CK cast.
Torso, upper legs and right shoulder: ML Cable
Left Shoulder: LCBH Stryker.
Upper arms: XMC Sabertooth.
Lower legs: LCBH Judge Dredd.
Lower arms: Duke Nukem
Hands: Duke Nukem? RE Hunk?
The straps are also from Duke Nukem.
Thanks for looking!](userimages/customs/50000/49712-1.jpg) Crossbones Marvel Legendsby Delta TI wanted to get rid of some spare parts so I made Crossbones with them.
Recipe.
Head: CK cast.
Torso, upper legs and right shoulder: ML Cable
Left Sho...4 comments | ![[Azrael Azbat Red 2.0] I wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figures.
Recipe:
Body, legs & upper arms: DCU Azrael
Lower arms: DCU Azbat
Headss DCU Azbat Aquaman
Armor: DCU Azbat
Thanks for looking!](userimages/customs/50000/49651-1.jpg) Azrael Azbat Red 2.0 DC Universeby Delta TI wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figur...1 comments |
![[Azrael Azbat Blue 2.0] I wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figures.
Recipe:
Body, legs & upper arms: DCU Azrael
Lower arms: ML Mr Fantastic, DCD Azbat and DCU Azbat hands
Heads DCU / DCD Azbat
Armor and leg pouches: DCD Azbat
Cape DCU Batman
I repainted all of the blue parts with Testors acrylic Metallic blue and everything else was a combination of Citidel and Vallejo.
Thanks for looking!](userimages/customs/50000/49650-1.jpg) Azrael Azbat Blue 2.0 DC Universeby Delta TI wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figur...2 comments | ![[Prometheus Engineer] This is more of a fix than a custom,but I took the lifeless head out of the decapitated helmet accessory that came with the Deacon figure, drilled a hole big enough to fit around the neck, put it on, popped the Pressure suit head in it, connected the hoses and painted it up.
Thanks for looking!](userimages/customs/50000/49594-1.jpg) Prometheus Engineer Aliensby Delta TThis is more of a fix than a custom,but I took the lifeless head out of the decapitated helmet accessory that came with the Deacon figure, drilled a h...8 comments |
![[Deathstroke the Terminator] I wanted to do a Deathstroke That was partly based off of the Arrow incarnation and League of Shadows, Kind of a "What if?" version. I want to eventually get a Slade head so he can have the interchangeability.
Thanks for looking!
Recipe:
Head: DCD Deathstroke held on via magnets.
Forearms: MM Batman Begins
Shins & feet: XMC Magneto
Everything else: MM TDK Batman](userimages/customs/50000/49590-1.jpg) Deathstroke the Terminator Movie Mastersby Delta TI wanted to do a Deathstroke That was partly based off of the Arrow incarnation and League of Shadows, Kind of a "What if?" version. I want ...14 comments | ![[Arkham City Azrael] Head / Legs: MK Jax
Torso: XMC Air Strike Wolverine
Arms: Assassin's Creed, FF Movie Mr Fantastic and fodder.
Hood: ML Moon knight
Cape: ML Mr. Sinister.
Armor: Assassin's Creed and LOTR Pieces.
The mask is sculpted and the bandages are pipe tape. He has interchangeable heads via magnets thanks to the tut that variablepenguin posted.
I want to give a big shout out to Fitzjedi, I drew a lot of inspiration from his AC Azrael. This custom has been on the back burner for about a year and has gone through a few incarnations before I was happy with him.
Thanks for looking, comments welcome!](userimages/customs/50000/49560-1.jpg) Arkham City Azrael Marvel Legendsby Delta THead / Legs: MK Jax
Torso: XMC Air Strike Wolverine
Arms: Assassin's Creed, FF Movie Mr Fantastic and fodder.
Hood: ML Moon knight
Cape: ML Mr. Sinist...7 comments |
![[Delta T 2.0] I know that your first question is: This clown is so full of himself that he made another custom of himself? Actually your first question will probably be: He made a first figure of himself? Anyway, the answer to both of your first questions is yes! Now before ya'll (All 4 of you that might give this a passing glance) start getting nitpicky, I know I'm a little chubbier than the figure conveys, I know I didn't shave in the reference picture and I know I wear my hair differently than I sculpted. I will eventually get around to updating the hair, I can either sculpt a 5'0 clock shadow or shave for my next ref pic and when you make a figure of yourself I will not get nitpicky with your likeness details!
Soooo... the recipe:
Head: ST Chekov with sanding sculpting and a new paintjob.
Torso, upper arms and thighs: BTVS Destiny Spike
Lower arms and jacket: DCU Mr Terrific
Hips: ML Movie Punisher
Shins: X-Men movie Wolverine.
Hands and feet: MM TDK Batman (My riding gloves IRL are very similar](userimages/customs/39000/38890-1.jpg) Delta T 2.0 Self Customsby Delta TI know that your first question is: This clown is so full of himself that he made another custom of himself? Actually your first question will probabl...11 comments | ![[Ghost Rider] Ever a fan of the Dan Ketch GR, (I'm a little bias since he has the same first name as I do)
I was compelled to make him.
Head: MU GR
Torso & upper arms: ROC Storm Shadow. The spikes are safety pins.
Legs: 25th Dreadnok, Torch I think
Forearms: Not sure, I think Specialist Tracker. The Gun is from some GI Joe guy.
Bike: 90's GR with a new shield made with cardboard, electrical tape and love.
I know he needs some paint touch-ups, I'll eventually get around to it.
Thanks for looking!](userimages/customs/38500/38198-1.jpg) Ghost Rider Marvel Universeby Delta TEver a fan of the Dan Ketch GR, (I'm a little bias since he has the same first name as I do)
I was compelled to make him.
Head: MU GR
Torso & uppe...1 comments |
![[Blade] More of a fix than a custom:
Head, torso, upper arms and lower legs: ML Blade.
Lower arms and coat: ML Ult Nick Fury.
Hips: BTVS Destiny Spike.
Upper legs: ML6 Punisher.
Silver stakes: Blade movie figure.
I wanted to make a Blade figure that could hold all of his weapons, was a little taller than the factory version and could close his legs all the way. I originally had ML Loki arms, but I broke down and put the Ult Nick Fury arms and coat on him like everyone else did. I wanted to keep the Vinyl coat, but I think the red liner looks awesome. I also had to sand down his Mac 11 handle little bit to make it fig in his hand. I'm really happy with the way he came out and I now have an awesome figure to stake the Edward Cullen Figure I'm going to make soon.
Thanks for stopping by, stay classy!](userimages/customs/38500/38116-1.jpg) Blade Marvel Legendsby Delta TMore of a fix than a custom:
Head, torso, upper arms and lower legs: ML Blade.
Lower arms and coat: ML Ult Nick Fury.
Hips: BTVS Destiny Spike.
Upper ...7 comments | ![[Ghost Rider Hell Bike] GET TO DEE CHOPPA!
I wanted to make a custom bike for my custom figure. The Bike it's self is from a toy line called Custom Choppers. The flame on the front wheel and handle bars are from a ML Johnny Blaze GR's bike, the flames on the back are from the Movie GR's bike and the shield is from the ML Danny Ketch GR's bike. The rest is just paint.
Thanks for looking!](userimages/customs/38000/37990-1.jpg) Ghost Rider Hell Bike Marvel Legendsby Delta TGET TO DEE CHOPPA!
I wanted to make a custom bike for my custom figure. The Bike it's self is from a toy line called Custom Choppers. The flame on the...8 comments |
![[Neo] I've seen a lot of awesome Neo's out there so I took all of the ideas I liked the best and put them into one figure. I wanted one that I could pose with or without the coat.
Recipe:
Head and boots: McF Lobby Shoot Out Neo.
Torso and lower arms: Destiny Spike.
Waist and upper legs: ML6 Punisher.
Upper arms, hands and lower knees: Fodder
I got the idea for the climbing harness from my buddy Jae who really needs a customizer moniker. Anyway they're rubber bands. In the future I'll make them glossier so they stand out more. The coat is from one of the ML Punisher's and I had to do a lot of sanding on the shoulders to make him not look like he was shrugging. I also had to boil-and-bend the boots into position.
Anyway, thanks to the creators of all the various Neo's out there for all the good ideas. I'm happy with the way all the parts came together.
Update: at the suggestion of another customizer I put the shoulder harness from the Wally World Movie Nick Fury on Neo while cutting off the M](userimages/customs/34500/34177-1.jpg) Neo Matrixby Delta TI've seen a lot of awesome Neo's out there so I took all of the ideas I liked the best and put them into one figure. I wanted one that I could pose w...7 comments | ![[Bruno Rex] This is a custom of / for my best friend Brian. As you can plainly see he loves the band Death and is a HUGE Chuck Schuldiner and Steve DiGorgio fan and the figure will soon have a rad bass guitar.
Recipe:
Everything but the arms and head: Destiny Angel.
Arms: Destiny Spike
Head: Star Trek Nero.
He was positively STOKED when I gave him the figure and we often go zombie hunting together.](userimages/customs/34500/34162-1.jpg) Bruno Rex Originalby Delta TThis is a custom of / for my best friend Brian. As you can plainly see he loves the band Death and is a HUGE Chuck Schuldiner and Steve DiGorgio fan a...1 comments |
![[AOA Cyclops] Sooooo. I thought I submitted this 4 years ago with all of my other AOA customs... but I guess I was wrong.
Recipe:
Waist up: ML Wonderman.
Waist down: ML FO Red Skull.
The hair is a combination of Gandalf hair and sculpting. Sculpted the rest and the optic blast is from the awesome tut that someone posted... but I forgot who it was.](userimages/customs/34500/34137-1.jpg) AOA Cyclops Marvel Legendsby Delta TSooooo. I thought I submitted this 4 years ago with all of my other AOA customs... but I guess I was wrong.
Recipe:
Waist up: ML Wonderman.
Waist dow...4 comments | ![[Snake Eyes 2.0] I wanted to go with a more basic and lean version than my last one. It's nothing really special, I'm just proud of the gun holster I sculpted for him.
Recipe:
Head, forearms, shins: ML Deadpool
Torso, upper arms and thighs: ML Bullseye.
I sculpted the tac hear on the chest, the holder for the sword on his back and the holster on his leg. The visor is from a figure called Cravex from the Visionaries. The Deagle is from an Evangaleon Eva figure, the G36 is from a terminator figure modified with a ML butt stock and the sword is from a Planet of the Apes Attar figure.](userimages/customs/34500/34013-1.jpg) Snake Eyes 2.0 G.I. Joeby Delta TI wanted to go with a more basic and lean version than my last one. It's nothing really special, I'm just proud of the gun holster I sculpted for him....1 comments |
![[Shredder] I saw a lot of sharp (no pun intended) Shredders out there and had the fodder to do it so here it is.
Recipe:
Torso, upper arms: LCSH Star
Thighs: HML Ronin
Forearms and shins: Bullseye.
The head is just some Aves I stuffed up into his helmet and drilled a hole into. The armor and weapons are from a Jakks Sub-Zero and various Shredder figures and the cape is from an MM Batman.
This was a lot of fun to do. Thanks for looking!](userimages/customs/34000/33927-1.jpg) Shredder | ![[Killspree] I have always wanted to make a toy that would hurt you if you tried to play with it. This is an ML Omega Red from head to toe with some sculpting for his armor. I used about 50 safety pins for the spikes which is why his paint job is a little spotty here and there... because seriously... you try painting this thing.](userimages/customs/34000/33926-1.jpg) Killspree Marvel Legendsby Delta TI have always wanted to make a toy that would hurt you if you tried to play with it. This is an ML Omega Red from head to toe with some sculpting for ...12 comments |
![[Cable] I wanted to keep Cable huge but not freakishly huge. With the parts I used he scales up to about 6'8" which I am very happy with. Anyway Unlike the last cable I posted this ones robotic arm is on the correct way.
Recipe:
Head,arms, shins Tac gear and guns: MU Cable (Guns are modded with some marauder accessories).
Torso: 25th Aniv Roadblock
Shins: ... I need a Mulligan, they're from some new style GI Joe guy.
The shoulder pads are from a Star Wars Evolutions Mandlore figure, the bullets are also from roadblock. Ive tried about 5 times to glue them down so the heck with it. The thing on his arm is from of the ROC Accelerator suits and the backpack is from an ROC Viper. I posted a pic standing next a repainted but otherwise unaltered Range Viper for a sense of scale. One day I'll get another Cable to compare to.
I'm really stoked with the way he came out. I hope you all dig it and thanks for looking.](userimages/customs/34000/33598-1.jpg) Cable Marvel Universeby Delta TI wanted to keep Cable huge but not freakishly huge. With the parts I used he scales up to about 6'8" which I am very happy with. Anyway Unlike t...4 comments | ![[Day off Cable] Recipe:
Head,arms and shins: ML Cable
Torso and legs: XMC Sabertooth
Left shoulder: SMC Ult Rhino
I sculpted the left side of his body and the rest is just a paintjob. This one has been on the back burner for about 4 years now. I wanted to finish him up. Thanks for looking :)](userimages/customs/34000/33534-1.jpg) Day off Cable Marvel Legendsby Delta TRecipe:
Head,arms and shins: ML Cable
Torso and legs: XMC Sabertooth
Left shoulder: SMC Ult Rhino
I sculpted the left side of his body and the rest is...4 comments |
![[Mystique] It's a Durham Red figure from head to toe.I cut off some of the stupid superfluous junk on her and painted her. Cut off the Beehive hair cut she had and gave her XMC Rogues hair. That's about it.](userimages/customs/31000/30532-1.jpg) Mystique X-Menby Delta TIt's a Durham Red figure from head to toe.I cut off some of the stupid superfluous junk on her and painted her. Cut off the Beehive hair cut she had a...2 comments | ![[Red Skull] Head: MLFO Red Skull
Torso: Hellboy Kronen
Legs: ML Wonderman
I wanted a figure for Cap and Mags to tarpound, that's about it.](userimages/customs/31000/30522-1.jpg) Red Skull Marvel Legendsby Delta THead: MLFO Red Skull
Torso: Hellboy Kronen
Legs: ML Wonderman
I wanted a figure for Cap and Mags to tarpound, that's about it....5 comments |
![[Bruce Wayne] I know there's like a gajillion of these but is yours handing the Delta T figure mad stacks or letting him ride the Batpod? I didn't think so. Anyway I did the same thing everyone else did, only difference is that I used ML Prof. X's lower legs to make him a little taller.](userimages/customs/30500/30492-1.jpg) Bruce Wayne Movie Mastersby Delta TI know there's like a gajillion of these but is yours handing the Delta T figure mad stacks or letting him ride the Batpod? I didn't think so. Anyway ...2 comments | ![[AOA Gladiator] He's basically Red Tornado's upper half and I think Superman's lower half. The thigh high boot tops and mohawk were sculpted. He's been on my back burner for a few years so I wanted to finish him off.](userimages/customs/30500/30491-1.jpg) AOA Gladiator Marvel Legendsby Delta THe's basically Red Tornado's upper half and I think Superman's lower half. The thigh high boot tops and mohawk were sculpted. He's been on my back bur...0 comments |
![[Falconer Predator] Basically the same thing I did on the Berserker Predator, Made him work out a lot and eat a high protein diet. The body is from a LOTR dude, and the arms, legs, head and armor are from the NECA Predator. The rest is a paint job.](userimages/customs/30500/30451-1.jpg) Falconer Predator Predatorby Delta TBasically the same thing I did on the Berserker Predator, Made him work out a lot and eat a high protein diet. The body is from a LOTR dude, and the a...1 comments | ![[Adam X-Treme] Basically just gave Ripclaw an ML Cap's arms and a paint job. The axes are from the MK Sub-Zero and the blades on the arms are from a Shredder fig.](userimages/customs/30500/30450-1.jpg) Adam X-Treme Marvel Legendsby Delta TBasically just gave Ripclaw an ML Cap's arms and a paint job. The axes are from the MK Sub-Zero and the blades on the arms are from a Shredder fig....1 comments |
|