![[The Straw] Straight out of the fast food garbage he emerged. Full of anger for those who litters the streets with that, what can be recycled. His name is the STRAW. Born from ordinary household cleaners that caused a toxic mixture. He is the STRAW, Avenger for all plastics that are just abused. BEWARE!!!!! This figure is fully articulated, bends in all sorts of directions, plus he has the ability to stretch out. Please be kind, this was something to pass the time.](userimages/customs/9500/9142-1.jpg) The Straw Originalby W3BH3ADStraight out of the fast food garbage he emerged. Full of anger for those who litters the streets with that, what can be recycled. His name is the S...1 comments | ![[Thors Mjolnir] I loved the Thor Hasbro came out with. I just didn't like his Mjolnir. People correct me if I'm wrong. Mjolnir is indestructable!!!! I loathed the way Hasbro had it all eat up like acid had its way with it. So I carved my own Mjolnir out of wood. Found a sturdy hollow sucker stick, wrpped it with very thin real leather, added lots of superglue. let all dry. Then I painted the whole handle a even brown color. I also had to carve lines into the handle because it didn't turn out like what I wanted but I sure am happier with this custom Mjolnir then what Hasbro gave him. What do you all think? :)](userimages/customs/8000/7738-1.jpg) Thors Mjolnir Marvel Legendsby W3BH3ADI loved the Thor Hasbro came out with. I just didn't like his Mjolnir. People correct me if I'm wrong. Mjolnir is indestructable!!!! I loathed the...1 comments |
![[Movie War Machine] All I did has to remove the braclet things off of his wrist guns & then attach them to his arms. Very simple procedure.](userimages/customs/8000/7737-1.jpg) Movie War Machine Marvel Legendsby W3BH3ADAll I did has to remove the braclet things off of his wrist guns & then attach them to his arms. Very simple procedure....0 comments | ![[Red Skull] Nothing fancy but a couple eye dots & a newly formed hand to hold a Pistol.](userimages/customs/8000/7736-1.jpg) Red Skull |
![[Captain America] I didn't like the strips. I've always felt that a red strip should be below his star on the chest. So I fixed them. I gave his chest star some gloss, I then gave his shield a nice luster. You know how the artists always make his shield all shinny? Well That's what I wanted.](userimages/customs/8000/7735-1.jpg) Captain America Marvel Legendsby W3BH3ADI didn't like the strips. I've always felt that a red strip should be below his star on the chest. So I fixed them. I gave his chest star some glos...0 comments | ![[Johnny Storm (Human Torch)] This figure didn't match with the rest of them. Torch had some of his old white & blue uniform showing whereas the rest of them had black & blue on. I just repainted over all the white & blue with black. Also made the 4 Logo over his left chest to match.](userimages/customs/8000/7734-1.jpg) Johnny Storm (Human Torch) Marvel Legendsby W3BH3ADThis figure didn't match with the rest of them. Torch had some of his old white & blue uniform showing whereas the rest of them had black & bl...0 comments |
![[Silver Surfer] This Custom Took Me Forever. First off let me start with how I hate pegs on props. After looking at my Silver Surfer for a long time, I got tired of knowing about the pegs on his board causing poor Norrin Radd to look stupid when he gets displayed. I first pryed open his board & Dremeled the guts out. I slid a piece of steel inside the board & superglued it all back. I then Dremeled the pegs down & gave the whole board a nice clean crome silver coat. I put 2 magnets in each of Surfers feet & gave him a nice coat of crome silver. Everything dryed super HARD for 2 days. Well, when I put the surfer on the board to see if he'll magnetize to it, he did. But, not a pretty picture when I seperate him from the board. Paint got all scratched up, etc. I decided to go a differant approach. I found some thin sheet metal & made a board, way too thin was the result. I then found a thicker but yet thin sturdy sheet metal. Come to find out it's stainless steel. A lot of](userimages/customs/8000/7733-1.jpg) Silver Surfer Marvel Legendsby W3BH3ADThis Custom Took Me Forever. First off let me start with how I hate pegs on props. After looking at my Silver Surfer for a long time, I got tired of ...4 comments | ![[The Human Torch] I had to fix the lines on his face because somebody at the factory had too much hooch the night before. Plus I gave him a little shine.](userimages/customs/8000/7732-1.jpg) The Human Torch Marvel Legendsby W3BH3ADI had to fix the lines on his face because somebody at the factory had too much hooch the night before. Plus I gave him a little shine....0 comments |
![[Thing] For this one, I just super glued his shoulder joints back into the back cavity. I've always liked this Thing over all the others.](userimages/customs/8000/7731-1.jpg) Thing Marvel Legendsby W3BH3ADFor this one, I just super glued his shoulder joints back into the back cavity. I've always liked this Thing over all the others....0 comments | ![[Ghost Riders Chain Whip] I just made a Chain Whip for old Ghost Rider. I used some small chain I found in the craft store & a very thin wire. Now Ghost Rider has a bendy Chain Whip.](userimages/customs/8000/7730-1.jpg) Ghost Riders Chain Whip Marvel Legendsby W3BH3ADI just made a Chain Whip for old Ghost Rider. I used some small chain I found in the craft store & a very thin wire. Now Ghost Rider has a bendy ...3 comments |
![[Carnage] Just added a gloss spray to give him that slimy/oily look.](userimages/customs/8000/7729-1.jpg) Carnage | ![[Movie Venom] O.K. Now this one I'm Proud of. Again just a simple & patient paint job. I hated how Hasbro had the spider grey.](userimages/customs/8000/7728-1.jpg) Movie Venom |
![[Movie SpiderMan] Just a simple repaint Over the Blackish Blue & touched up his eyes](userimages/customs/8000/7726-1.jpg) Movie SpiderMan | ![[Iron Man] Fist of all this was a simple repaint, but I decided that the gold wasn't GOLD enough. So here's my updated ML 1 IRON-MAN. This time not only did I add more gold(instead of being stingy), but I also super glued his shoulder mounts into the cavity of his back. I hope everyone likes this one better. I know I sure did. Enjoy all & Thank U once again for the inspiration.](userimages/customs/6500/6193-1.jpg) Iron Man Marvel Legendsby W3BH3ADFist of all this was a simple repaint, but I decided that the gold wasn't GOLD enough. So here's my updated ML 1 IRON-MAN. This time not only did I ad...1 comments |
![[Wolverine Real Metal Claws] I got this idea from various customizers here in FigureRealm. Bobby pins cut & sharpened. I can still remove them for a non-lethal look. Thank U for looking.](userimages/customs/6500/6191-1.jpg) Wolverine Real Metal Claws Marvel Legendsby W3BH3ADI got this idea from various customizers here in FigureRealm. Bobby pins cut & sharpened. I can still remove them for a non-lethal look. Thank U f...0 comments | ![[Green Goblins Goblin Glider] I done this Glider a year ago. I loved the glider that came with Green Goblin but I wanted to display him with my other Goblins. I made a base stand out of a piece of wood then painted it. I also removed both Hobgoblin & Green Goblins Pumpkin Bombs. It just wasn't working for me. So when I can find some tiny Magnets, I'll insert them in the hands & bombs so that they'll be removable. Gave Hobgoblin a new Glider as well. Honestly I really didn't want to mess either glider up. Enjoy Peeps.](userimages/customs/6500/6190-1.jpg) Green Goblins Goblin Glider Marvel Legendsby W3BH3ADI done this Glider a year ago. I loved the glider that came with Green Goblin but I wanted to display him with my other Goblins. I made a base stand o...0 comments |
![[Punisher] Well here I am again. This time I wanted to show off my simple custom Punisher. I of course added a gun & knife to his legs. Gave him a Matchete(I made the sheath & the Matchete) on his hip. Some grenades & a double gun sling around his chest. The bulletproof vest & jacket was old Action Jackson stuff. I totally hand made the table and chair with popsicle sticks. Again hope everyone likes.](userimages/customs/6500/6188-1.jpg) Punisher Marvel Legendsby W3BH3ADWell here I am again. This time I wanted to show off my simple custom Punisher. I of course added a gun & knife to his legs. Gave him a Matchete(I...2 comments | ![[Venom] Original Venom W/ a fixed spider logo. I also fixed the eyes & the back of the hands.It took forever to get the lines in the spider right. Thank god for Sharpies!!!! I also added a touch of gloss for that slime look. I didn't add tendrils because Venom doesn't use them like Carnage does. I also left the elbow spikes, I like how it looks on him. This is #2 Custom. There's more to come, I just need to learn how to move faster. By the way, My best to all the great customizers out there. If it wasn't for U I wouldn't be typing right now. Thank U Everyone.](userimages/customs/6500/6183-1.jpg) Venom Marvel Legendsby W3BH3ADOriginal Venom W/ a fixed spider logo. I also fixed the eyes & the back of the hands.It took forever to get the lines in the spider right. Thank g...3 comments |
![[Punisher's Motorcycle] Handlebars are real metal, I wrote a lot of stuff but it disapeared on me. Windshield is removable, Handlebars are adjestible. Gold was painted black. Kyle Robinsone was the inspiration. hope everyone likes.](userimages/customs/6500/6180-1.jpg) Punisher's Motorcycle Marvel Legendsby W3BH3ADHandlebars are real metal, I wrote a lot of stuff but it disapeared on me. Windshield is removable, Handlebars are adjestible. Gold was painted black....3 comments | |
|