![[Black Lantern Firestorm] The fourth Black Lantern to be born on my table, Firestorm!
Obviously used a DCU Firestorm to start with but wanted more than just a repaint. So after browsing around at various pieces of artwork, I really dug the idea of his flames streaking off the Black Lantern emblem on his chest. So I started with sculpting his emblem which more resembles a comet look than the traditional look on the other Black Lanterns. I used the bolts that came off that blue Superman to add flames to the emblem and extra flames to his head to give it a fuller, more menacing appearance. Hands came from the bottom of the fodder bin. Cut away the bottom part of his face and replaced it with Gozer's (Ghostbusters) jaw. Then followed with a repaint of him and the "molecule" accessory he came with.
For an extra added touch, I decided to make a flame base out of an old toybiz Nova figure's hair. I weighted the bottom of it to give the base the extra support it needed for the weight of the figure.](userimages/customs/17500/17200-1.jpg) Black Lantern Firestorm D.C. Universeby StEvOtoysThe fourth Black Lantern to be born on my table, Firestorm!
Obviously used a DCU Firestorm to start with but wanted more than just a repaint. So aft...3 comments | ![[Black Lantern Martian Manhunter] Another member of the ever-growing Black Lantern Corps, Martian Manhunter. This one took quite awhile to get going. No matter what head I looked at I was never satisfied until I saw someone on here use a Savage Dragon head. So I used the same, sanding down the top of the head and substituting the bottom of his face with part of Taskmaster's jaw. Some additional sculpting and painting and his visage was complete.
The body came from one of the DCU Supermans (the blue one I believe) since in the comic he mentions how everyone forgets he is as strong as Superman, I thought it was an appropriate choice for a base. Switched the hands for the long claws of Lizard from the Spiderman classics line. Made an alternate hand for him from an extra Brood tentacle. Sculpted his chest emblem, wristbands, and other minor details followed by a complete paint job. Cape was made from a Black Panther cape with heavy modifications.
Now he's ready to give Green Lantern and Flash a whooping!](userimages/customs/17500/17199-1.jpg) Black Lantern Martian Manhunter D.C. Universeby StEvOtoysAnother member of the ever-growing Black Lantern Corps, Martian Manhunter. This one took quite awhile to get going. No matter what head I looked at ...4 comments |
![[Bonebreaker] The start of my Reavers gang, Bonebreaker!
Found a T-100 on clearance and figured it be the perfect tank bottom for Bonebreaker. I took the machine guns off the arms of the Terminator and reattached them to the tank, feeding the ammo into the back. Changed Wonder Man's head and hands for Bullseye's head and gloves. Sculpted over Bullseye's mask and created a mohawk out of bits of Jean Grey's hair. The connection to the tank was made out of a bunch of different fodder bits of wire and such. The glasses were stolen from Doc Ock, and the spine was made from a piece of Doc Ock's tentacle. Uzis pulled out of the fodder bin as well. I left off the straps that appear on his uniform usually, feeling they made him look too constrained. Gave him a nice gritty paint job, and the first Reaver is complete.
Skullbuster and Pretty Boy, you're next.](userimages/customs/17500/17015-1.jpg) Bonebreaker Marvel Legendsby StEvOtoysThe start of my Reavers gang, Bonebreaker!
Found a T-100 on clearance and figured it be the perfect tank bottom for Bonebreaker. I took the machine ...5 comments | ![[Black Lantern Hawkman] The next figure to be introduced into my Black Lantern Corps, Hawkman; who made his first appearance in the last page of Blackest Night #2. We only get one shot of him so I had to take some liberties with how he was designed below the chest, using panterns found in the other Black Lantern costumes.
I started with a normal DCU Hawkman figure and removed the lower part of his face. Replaced it with the lower face of a Legendary Comic Heroes Judge Death. Then the next hard part....cutting up the fings to give them the tattered appearance found in the comic. Lots of patience but a nice result. Then just used some sculpting for his chest armor and the ring. Finished up with a paint job and another Black Lantern done.](userimages/customs/17000/16904-1.jpg) Black Lantern Hawkman D.C. Universeby StEvOtoysThe next figure to be introduced into my Black Lantern Corps, Hawkman; who made his first appearance in the last page of Blackest Night #2. We only g...5 comments |
![[Iron Patriot (Dark Avengers)] The first of the Dark Avengers to be made on my table. I tweaked the typical recipe a little bit to give him a more sinister and unique feel. I started with the stealth striker Iron Man movie figure cos I liked how his double more sharp shoulder pads gave a more evil feel to the Iron Man suit. Then switched all the limbs out for the movie Mach 3 figure. Sculpted the star on his chest, and the usual paint job of red, blue, and white. Thinking of giving him an alternate Norman head, but not the laughing one from the Green Goblin variant.](userimages/customs/17000/16762-1.jpg) Iron Patriot (Dark Avengers) Marvel Legendsby StEvOtoysThe first of the Dark Avengers to be made on my table. I tweaked the typical recipe a little bit to give him a more sinister and unique feel. I star...3 comments | ![[Brock Samson (Venture Bros.)] Many moons ago, I made a Monarch figure and planned to make a lot of the characters from "Venture Bros." but got sidetracked by other projects. But now I have finished the Ventures' infamous bodyguard, Brock Samson.
Swapped out Savage Dragon's head for the long haired Superman, when the ole red and blue rocked a mullet. Sculpted a collar for his shirt and a cigarette for his hand. Then a new paint job from the waist up. Bronzed flesh with drybrushing of light flesh for his skin tone.
Now he's ready to punch Monarch right in the kisser while getting the Led out!](userimages/customs/17000/16761-1.jpg) Brock Samson (Venture Bros.) Marvel Legendsby StEvOtoysMany moons ago, I made a Monarch figure and planned to make a lot of the characters from "Venture Bros." but got sidetracked by other projec...0 comments |
![[Black Lantern Ralph Dibny (Elongated Man)] I've never been big into the DC Universe beyond the usual classics; Batman, Superman, The Flash, etc. The only DC I read regularly was old Batman issues and Green Arrow. But now with the onset of "Blackest Night", I've taken a real interest in the world around Green Lantern. And so, my first DC comics custom.....
Ralph Dibny, aka Elongated Man, now one of the first of the Black Lanterns preying upon the hearts of the living throughout the DC Universe. Started with the simple choice of a movie Mr. Fantastic, specifically the one that had interchangeable parts to make him 12" tall. Swapped the boots out for ones in my fodder drawer. I replaced Mr. Fantastic's head with a retooled head of Banshee....used a blowdryer to heat his head up and clamped it tight to let cool off. This created his stretched face look. Then some sculpt to the hair and nose....hot glue to create drool (apparently he has a real drooling problem being "dead", don't believe me see Bla](userimages/customs/17000/16669-1.jpg) Black Lantern Ralph Dibny (Elongated Man) D.C. Universeby StEvOtoysI've never been big into the DC Universe beyond the usual classics; Batman, Superman, The Flash, etc. The only DC I read regularly was old Batman iss...3 comments | ![[Werewolf-by-Night] "Monster Mike" as I'm now calling my friend since this will be the third monster custom I've done for him.
I had a brilliant starting idea for this custom. Nightcrawler's head always reminded me of Werewolf's. Then I picked out Sabretooth's arms and legs (from the Toybiz two-pack) cos I loved their muscular look and the mass amounts of hair around his wrists and ankles. But I was stuck on a body....till I popped the jacket off a movie Beast figure, and voila! Just had to sculpt some pants legs and the hard work was done. His fur was painted in three shades of brown, repeatedly drybrushed. Pants-green, eyes-yellow, and nails done too....all the usual citadel paints.](userimages/customs/17000/16577-1.jpg) Werewolf-by-Night Marvel Legendsby StEvOtoys"Monster Mike" as I'm now calling my friend since this will be the third monster custom I've done for him.
I had a brilliant starting idea ...1 comments |
![[Morbius (70's Style)] Commission piece for the same friend who got Man Thing. He's building up his collection of old school 70's Marvel monsters. Now to add Morbius to his collection!
Started with an Iron Fist body, and got rid of the arms, head, and feet. Gave him the Spiderman Classics Morbius' arms and feet from an extra Dr. Strange. The head was taken from a Spiderman Classics Hobgoblin with sculpted hair, goatee, and sculpting work done over his face to cover up Hobgoblin's huge brows. The flaps under his arms were made from clear vinyl found in any craft section; it's very pliable and versatile in customizing!
Full repaint to give him that deep blue, almost black hue. Fingernails done in a striking yellow to make them really pop out at you.](userimages/customs/17000/16576-1.jpg) Morbius (70's Style) Marvel Legendsby StEvOtoysCommission piece for the same friend who got Man Thing. He's building up his collection of old school 70's Marvel monsters. Now to add Morbius to hi...0 comments | ![[Marrow] After seeing a bunch of Marrows on here that showed her in her Gene Nation days, I decided to take a more "attractive" approach to Marrow. More like when she was in control of her powers/part of the X-men.
I started with a Psylocke body, adding a Wasp head with some additional sculpted hair. All of the bones came from some part of Doomsday body (from the DCU line), sculpted and arranged to give her back a huge boney appearance, with other bones sticking out of her knees, shoulders, arms, and waist. Skin was painted with a careful mix of flesh and slight amount of red to give her a mild pink tone. Bones (along with her huge bone weapon which came from one of Kratos' swords) were painted black, heavy drybrush of bleached bone, then a lighter drybrush of white. The rest of her outfit was painted with normal Citadel paints.
Very happy with how she turned out overall. Might make a base to go with her eventually.](userimages/customs/15000/14956-1.jpg) Marrow Marvel Legendsby StEvOtoysAfter seeing a bunch of Marrows on here that showed her in her Gene Nation days, I decided to take a more "attractive" approach to Marrow. ...5 comments |
![[Warpath] Not much added to this recipe that's been used a countless number of times. Simple repaint of Doc Samson. Belt is from Moon Knight (so it has the storage on the back for his knives) with a n "X" symbol from some X-men accessory. Knives came from the Legendary Comic Heroes Bodybags 2-pack....and now he's ready to cut the lard out of Blob.](userimages/customs/15000/14955-1.jpg) Warpath Marvel Legendsby StEvOtoysNot much added to this recipe that's been used a countless number of times. Simple repaint of Doc Samson. Belt is from Moon Knight (so it has the st...0 comments | ![[MF Doom] This is a piece for a friend of mine. The hip hop supervillian inspired by the infamous marvel character Doctor Doom.
Most of the work was a huge paint job, detailing his mask and jersey. His Dunks were sculpted and given a full detail job as well, including his picture on the bottom of the shoes (see picture #2). The mic was created from the end of a simple pen with sculpt for the head, using cheesecloth to create the texture for the mic.](userimages/customs/14500/14274-1.jpg) MF Doom Mighty Muggsby StEvOtoysThis is a piece for a friend of mine. The hip hop supervillian inspired by the infamous marvel character Doctor Doom.
Most of the work was a huge p...4 comments |
![[Blink] This was one character I've been trying to do for awhile but I kept waiting for the right inspiration to come around. It struck in the form of a Superman/Batman figure (Kara-El, Supergirl influenced by Darkseid). She had the perfect head for Blink and I went from there.
I started with a Mystique body, using sculpting for the boots, leg band, and collar. Her skirt came from pieces of Kara-El's outfit with a little bit of sculpt near the waist. The head was cut back a little to get rid of the mean look on her face, and her hair was sculpted in the back to lead into the longer strands made from strands of hemp. Her dart pouch came from Taskmaster? with darts made from long toothpicks. I used some energy effects from the Ghostbusters Gozer figure with one of her spears to replicate her teleport energy signature. And we have one leader of the Exiles, before she left anyway....](userimages/customs/14500/14273-1.jpg) Blink Marvel Legendsby StEvOtoysThis was one character I've been trying to do for awhile but I kept waiting for the right inspiration to come around. It struck in the form of a Supe...3 comments | ![[Chamber] This is an adaption on Jin Saotome's recipe for the same figure. It was just such an amazing figure, I had to make my own.
Started with the same Ghost Rider figure and hacked away to redo the LED on the inside. Recreated his neck from a Human Torch and the flame is mixed from some Iron Fist's flames, Ghost Rider, and various other bits of flame I had in my scrap drawer. I also used a Street Fighter Remy's head but instead of sculpting the hair, I added other bits of hair to it and left it long in the back to go the flow of the figure's coat as well. The arms came from the movie Blackheart figure with Remy's hands. Jacket is from some random Neo figure, longer than most people use for their Chamber recipes but I like its long flowing look. And the best part of this figure is I only had to paint the face and hair.](userimages/customs/14000/13567-1.jpg) Chamber Marvel Legendsby StEvOtoysThis is an adaption on Jin Saotome's recipe for the same figure. It was just such an amazing figure, I had to make my own.
Started with the same Gho...0 comments |
![[Darkhawk] There are a lot of recipes on here for this one but added my own unique twist. Couldn't decide between the winged version of Darkhawk or just a regular more pose able version so I got the best of both worlds here. One with removable wings!
Started with Archangel's body and sculpted everything. Helmet, chest, shoulder armor, belt, and claw. Proceeded to cut slits in his sides to allow his wings to pop in and out easily. Took part of his metal wings (I like the sharp look they have, reminds me of my days reading his comic in the 90's) and cut to fit his arm length. Then a full repaint of black and drybrush with a dark blue (regal blue) on his main body with silver and red for the rest.](userimages/customs/14000/13563-1.jpg) Darkhawk Marvel Legendsby StEvOtoysThere are a lot of recipes on here for this one but added my own unique twist. Couldn't decide between the winged version of Darkhawk or just a regul...0 comments | ![[Nate] A custom figure I did also for my friend Amirah of her boyfriend Nate for her birthday. Started with that guy from Fallout Boy (don't know his name, I think he's the drummer) and got out my knife. Said goodbye to his facial piercings and collared shirt. The rest was just a quick repaint to match him and ta-dah!](userimages/customs/13500/13454-1.jpg) Nate Miscby StEvOtoysA custom figure I did also for my friend Amirah of her boyfriend Nate for her birthday. Started with that guy from Fallout Boy (don't know his name, ...0 comments |
![[Amirah] This is a custom of my friend I did for her Christmas present. Using her assorted wardrobe, I created a figure of herself to enjoy.
Started with the Marvel Legends Rachel Summers as a base. Cut off her over sized loop earrings and repainted the whole figure to match my friend. Gave her a purse from an extra Green Goblin shoulder bag, painted it as a Union Jack to go with her anglophile tendencies.](userimages/customs/13500/13453-1.jpg) Amirah Miscby StEvOtoysThis is a custom of my friend I did for her Christmas present. Using her assorted wardrobe, I created a figure of herself to enjoy.
Started with the...0 comments | ![[The Hood] Straight from the pages of New Avengers and Osborn's Dark Reign, here comes Parker Robbins aka The Hood. Anyone not familiar with this character, he leads a criminal empire of various villains to gang up against the Avengers. His cloak provides him with limited invisibility, and boots provide flight. He is also suspected to be possessed of the Nisanti demon but was later revealed to be powers granted by Dormammu.
Parker Robbins was made from a Street Fighter Remy with a head from Marvel Legends Wonderman and hands from Xorn so he was able to hold two pistols. The cloak was made from Moon Knights cape with some reconstruction and part of the cape from a Morbius figure for a more tattered look. His "alternate" demon face was made from a Morbius face and some sculpt, and is easily removable. The last photo came from his first incident with the Avengers when he shot Wolverine right in the crotch.](userimages/customs/13500/13258-1.jpg) The Hood Marvel Legendsby StEvOtoysStraight from the pages of New Avengers and Osborn's Dark Reign, here comes Parker Robbins aka The Hood. Anyone not familiar with this character, he ...1 comments |
![[Captain America (Bucky Barnes)] This was done for my Captain America obsessed friend for Christmas this past year. Just a simple repaint of the old Captain America with sculpted belt pouches and a gun added from the Marvel Legends Bishop.](userimages/customs/13500/13254-1.jpg) Captain America (Bucky Barnes) Mighty Muggsby StEvOtoysThis was done for my Captain America obsessed friend for Christmas this past year. Just a simple repaint of the old Captain America with sculpted bel...0 comments | ![[Sauron] I found a Man Bat figure in a clearance bin at a comic convention and thought with a little work, I could finally have the Sauron figure Hasbro keeps denying all of us. He is the reason the Avengers got back together after "Disassembled".
First step was to get rid of Man Bat's head along with all the fur on his arms, legs, back, and chest. Then a re-sculpted Ultimate Lizard head was added along with a torn lab coat made from Doc Ock's lab coat. Then a full repaint from head to toe in Citadel paints. Even painted all the veins on his wings which really make this figure enormous in size.](userimages/customs/13500/13158-1.jpg) Sauron Marvel Legendsby StEvOtoysI found a Man Bat figure in a clearance bin at a comic convention and thought with a little work, I could finally have the Sauron figure Hasbro keeps ...5 comments |
![[Penance] Description: I originally started this figure shortly after "Civil War" first showed the Penance but easily became frustrated with the figure at the time so it got put away in my unfinished projects drawer and forgotten about. After I got back into the full swing of customizing, this was one of the first piece I was determined to finish.
Simple use of Archangel's body (I find this to be a real generic base figure to use for a lot of customs) with armor made from a combination of Annihilus' shoulder pads and sculpting. I wanted my Penance to have a removable helmet so a Prof. X head was a good choice being one of the few choices for a bald character. The helmet was made from combining the Cerebro helmet, an Iron Man mask, sculpt, and random spikes from my scraps bin. His "bindings" were made from simple ribbon and metal rings found strolling down the jewelry aisle at a craft store. A full body paint job of blood red, boltgun metal, and black. The "energy&](userimages/customs/13000/12842-1.jpg) Penance Marvel Legendsby StEvOtoysDescription: I originally started this figure shortly after "Civil War" first showed the Penance but easily became frustrated with the figur...0 comments | ![[Man Thing] After taking quite a sabbatical from the custom world, between moving and other crud in the life, I'm back with a vengeance. I didn't know much about his story but I took a look at the figure and see what I could do to make it "better".
I felt his size should be more overwhelming, so I started with a Sasquatch base. After a quick shave off Sasquatch's head, I re-sculpted the head using Fixit. I used the leftover hair plus the hairy "skirt" from Man Thing to create the rippling mossy hair going down his back. I also used the hands from the original Man Thing figure since I really liked all the articulation they gave his fingers. The branches that stuck out of the original figure became part of the base along with some extra Ghost Rider skulls I had laying around. A quick sculpt of some branch texture on his legs and arms, then paint and paint and paint. This sucker took a lot of paint but the overall effect is amazing. The pictures don't do it enough justice.](userimages/customs/13000/12593-1.jpg) Man Thing Marvel Legendsby StEvOtoysAfter taking quite a sabbatical from the custom world, between moving and other crud in the life, I'm back with a vengeance. I didn't know much about ...2 comments |
![[Black Bolt] One day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought it was a cool concept and decided to branch out further with a whole line of customs from these cutesy little figures.
I choose Namor as Black Bolt's base figure since he already had the "little wings" underneath his arms. I then sculpted his hood and little "tuning fork" on his forehead. With a full repaint including the white design on his outfit, this lil' screamer was ready for action. Check out my other Super Hero Squad customs on Figure Realm! Coming soon....Archangel and Cable!](userimages/customs/4000/3717-1.jpg) Black Bolt Super Hero Squadby StEvOtoysOne day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought...1 comments | ![[Puck] This version of Puck was inspired from an earlier recipe by BYGTOPP where he used the killer idea of a Marvel Legends Showdown Juggernaut as a great base figure for his Puck. And just like he said it is a really nice figure to cut up but luckily KayBee's had a ton of them on clearance so I decided to make my own.
Started the smae way with Jugg's body and MODOK's legs. However I choose Kraven's head and arms for my figure to give him his nice bushy stache and "superhero scream". A little sculpt for the helmet and cut down the arms more to scale. I replaced his hands with extra Sandman hands to give Puck the ability to stand on his hands and create some nice action poses. Repainted his outfit and gave him his VERY hairy arms with a black marker (don't worry I sealed it so there shall be no smudging) and Ta-Dah! Canada's very own midget hero!](userimages/customs/4000/3714-1.jpg) Puck Marvel Legendsby StEvOtoysThis version of Puck was inspired from an earlier recipe by BYGTOPP where he used the killer idea of a Marvel Legends Showdown Juggernaut as a great b...2 comments |
![[Silver Centurion Iron Man] One day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought it was a cool concept and decided to branch out further with a whole line of customs from these cutesy little figures.
My last one I did was an alternate Iron Man armor. Mostly a repaint with a little sculpting work on the helmet. Also added a flame from a random pumpkin bomb to give the little guy a lil' firepower.](userimages/customs/4000/3596-1.jpg) Silver Centurion Iron Man Super Hero Squadby StEvOtoysOne day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I though...0 comments | ![[Beta Ray Bill] One day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought it was a cool concept and decided to branch out further with a whole line of customs from these cutesy little figures.
My third choice was the hardest one to do to date. Change the mighty Thor into the not quite as mighty Beta Ray Bill. This one I had to re-sculpt a face for which was the toughest part (still not 100% happy on it but better than the first one I did lol). Then sculpted him some knee pads and a belt buckle. After a complete repaint, I added lightning coming out of his fingers for a little pizazz!](userimages/customs/4000/3595-1.jpg) Beta Ray Bill Super Hero Squadby StEvOtoysOne day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I though...0 comments |
![[Daredevil-Original Yellow Outfit] One day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought it was a cool concept and decided to branch out further with a whole line of customs from these cutesy little figures.
My second one to do was Daredevil which was also a repaint but involved a little more work to get the color scheme down.](userimages/customs/4000/3594-1.jpg) Daredevil-Original Yellow Outfit Super Hero Squadby StEvOtoysOne day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I though...0 comments | ![[Elektra-White Outfit] One day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I thought it was a cool concept and decided to branch out further with a whole line of customs from these cutesy little figures.
Up first is Elektra, which was the easiest. Just a simple repaint to put her in her alternate white outfit....the lil' innocent assassin!](userimages/customs/4000/3593-1.jpg) Elektra-White Outfit Super Hero Squadby StEvOtoysOne day browsing around on the internet, I found somebody had repainted their Super hero Squad Elektra and Daredevil with alternate outfits. I though...0 comments |
![[Mole Man] Not getting his recognition in either Fantastic Four movie, Mole Man still gets his props in my toy collection with my own custom. I used a Spiderman box set Doc Ock, and very carefully cracking open the main body, I switched out his head for the head from the original 5 inch size Mole Man figure. Also stole his cape for my custom as well and attached with the good old gorilla glue and created a collar for it out of an old gold necklace chain and some sculpt-it. I choose to use hands from a Kevin Sin City figure since the size of them was perfect for the figure plus the sharp nails look was perfect for mole man. His "pimp cane" is a missile accessory from a Showdown figure painted silver then a nice clear yellow. A slight darker shade of green for his outfit and a layer of flesh washes to give him a dingy cavern look and Mole Man is ready to conquer the surface world!
Monster not included! But may be created soon!](userimages/customs/4000/3575-1.jpg) Mole Man Marvel Legendsby StEvOtoysNot getting his recognition in either Fantastic Four movie, Mole Man still gets his props in my toy collection with my own custom. I used a Spiderman...0 comments | ![[The Monarch (Venture Brothers)] Beware the Mighty Monarch!
If you've seen the show Venture Brothers, you know who this is already. If not, then what are you waiting for?? It's only the best show on tv right now! Anyway, most of his body came from the Marvel Legends Wasp body. To get rid of the "womenly features", I performed a very gruesome reduction with a dremel sander then hand-sculpted the vest armor overtop. Used some spae shoulder pads and boots from a X-men Classics Storm figure. Originally I was going to use Black Widow's arms but her figure was unavailable at a reasonable cost so I just hand-sculpted the wrist launchers. The head came from a spare Archangel figure with a lot of sculpting work. A complete paint overhaul and the Monarch is ready to take flight.
PS-If you're wondering about the Hulk hand he has in the last picture, watch the second episode from the second season in which The Monarch and his henchmen (21 & 24) plus Dr. Venture must take the flying cocoon back from the gr](userimages/customs/3000/2711-1.jpg) The Monarch (Venture Brothers) Marvel Legendsby StEvOtoysBeware the Mighty Monarch!
If you've seen the show Venture Brothers, you know who this is already. If not, then what are you waiting for?? It's onl...1 comments |
|