![[Cassios] I started by shaving off the hair, and boots with my Dremel, and cutting of his left ear.
The next step was to modify the eyes, nose, and mouth, and re-sculpting them; A new mouth with sharp teeth, a new nose and eyes/eyebrows.
After that, I sculpted the shoulder pads and made them movable , straps, belt, knee pads, leg laces, and other details with Apoxy.
The ring on the center of the chest is made out of real metal painted in aluminum.
The hair was made with hard plastic incrusted in his head covered with a layer of Apoxy, and painted in white.
The final step was to paint the eyes and mouth, the skin tone with a mix of Formula P3 paints, white for the pants, dark brown leather for the armor, and aluminum for the details.](userimages/customs/50000/49806-1.jpg) Cassios Saint Seiyaby shakaI started by shaving off the hair, and boots with my Dremel, and cutting of his left ear.
The next step was to modify the eyes, nose, and mouth, and r...3 comments on eBay Now! | ![[DARK LANDMINE (Decepticon)] I removed the head, and modified the upper part using Apoxy Sculpt and eliminating the visor, I also sculpted over the Autobot symbol on his chest, I proceed with a full paint job, and added custom made decals on his chest, and each side of the battle station.](userimages/customs/50000/49803-1.jpg) DARK LANDMINE (Decepticon) Transformersby shakaI removed the head, and modified the upper part using Apoxy Sculpt and eliminating the visor, I also sculpted over the Autobot symbol on his chest, I ...1 comments on eBay Now! |
![[Indigo Lantern Grey Martian] I started by removing the hair, loin cloth and sculpting over the "Martian" shape head.
I sculpted the collar and symbol on her chest, and added the power ring, the next step was to
add a new loin cloth and shoulder pads made from rubber.
The staff was entirely made from scratch and painted with metallic colors, and chrome for the center.
The figure was then painted with a mix of colors made from formula P3 paints, the details (logo on her forehead, eyes, lips, tattoo on the side of her legs and martian symbol on the front of the loin cloth were painted by hand).
I added some glow in the dark paint to the symbol on her chest and head.
And finally I sealed the entire figure with both flat, and gloss clear.](userimages/customs/48500/48364-1.jpg) Indigo Lantern Grey Martian Green Lanternby shakaI started by removing the hair, loin cloth and sculpting over the "Martian" shape head.
I sculpted the collar and symbol on her chest, and a...2 comments | ![[BATMOBILE TUMBLER, BATPOD & BATMAN beyond John] I started by disassembling the Vehicles, and removing ALL the electronics from the Batmobile, I sculpted over the holes left by the red buttons. The next step was to sculpt the Batman Beyond symbols on the car and Bat-pod; I sanded down any imperfections followed by a coat of primer, meanwhile I remodeled the Batman Figure by trimming the excess accessories on his belt, and sanded down the mask, I paint him in flat black with the red Batman logo on his chest.
Once the primer was dried on the vehicles, I applied two coats of metallic black automotive paint, painted the details inside the Batmobile,(leather finish for the seat, and different colors for the instruments panel), the next step was the gold, chrome, and metallic red highlights on both the car, and the bike. I put them back together and finally a top coat of gloss clear to finish the job!!!](userimages/customs/48500/48362-1.jpg) BATMOBILE TUMBLER, BATPOD & BATMAN beyond John Batman Beyondby shakaI started by disassembling the Vehicles, and removing ALL the electronics from the Batmobile, I sculpted over the holes left by the red buttons. The n...3 comments |
![[Two Evil (Original Character)] The evil Skeletor has been defeated by He-man, but Tri-klops and Evil-Lyn are not giving up their plans to conquer Eternia.
With the remains of their former Master they have created a new entity by combining technology, and magic they gave life to the new Lord of Destruction: TWO EVIL
RECIPE:
Base: Two Bad
Skull Head: Modified Skeletor head.
Robot Head: Transformer (unknown) with reflective plastic for the eyes.
Weapons: Fodder
Armor/Knee Pads/Skull head: Apoxy Sculpt
Paints: Formula P3, Alclad II, Citadel, Glow in the Dark.
Right Hand: Modified to fit interchangeable weapons](userimages/customs/48000/47688-1.jpg) Two Evil (Original Character) Masters of the Universeby shakaThe evil Skeletor has been defeated by He-man, but Tri-klops and Evil-Lyn are not giving up their plans to conquer Eternia.
With the remains of their ...1 comments | ![[Darth Vader Mcquarrie Silver Anniversary Edition] It is a repaint by drybrushing Wicked Silver, and Alclad II Chrome.](userimages/customs/46500/46395-1.jpg) Darth Vader Mcquarrie Silver Anniversary Edition |
![[Phoenix IKKI OCE V.2] Same recipe as my V.1
On this figure I filled in the peg holes in his legs, added wings made from styrene, and I used two shades of orange instead of just one.](userimages/customs/46500/46368-1.jpg) Phoenix IKKI OCE V.2 Saint Seiyaby shakaSame recipe as my V.1
On this figure I filled in the peg holes in his legs, added wings made from styrene, and I used two shades of orange instead of...2 comments | ![[Andromeda Shun God Cloth V2] Same recipe as my V1, with a few modifications:
Repainted the figure in white, redesigned the pattern for the gold accents, added the full mask, I individually attached the nebula chain to each of the arm pieces, and built the wings an important part of this armor.](userimages/customs/46000/45680-1.jpg) Andromeda Shun God Cloth V2 Saint Seiyaby shakaSame recipe as my V1, with a few modifications:
Repainted the figure in white, redesigned the pattern for the gold accents, added the full mask, I ind...4 comments |
![[X-Force Storm] I removed the cape, and the hair, replaced the cape with a vinyl one, and sculpted new hair.
And finally a full paint job!!!](userimages/customs/45000/44980-1.jpg) X-Force Storm X-Forceby shakaI removed the cape, and the hair, replaced the cape with a vinyl one, and sculpted new hair.
And finally a full paint job!!!...1 comments | ![[Wolverine Loken (X-Men 2099)] This the story of Logan's grandson,
In the year 2099 after a great war that resulted in the destruction of most of humanity, a quiet young man appear claiming to be the grandson of the legendary Wolverine.
Recruiting a new team of gifted people, they will protect the new generation of this world against tyranny or................ will they become their evil rulers ?
I took a Wolverine figure and added metal claws (Daken Style), sculpted the hair, built some X-Shields on his arms and legs, and again a full custom paint job.](userimages/customs/45000/44664-1.jpg) Wolverine Loken (X-Men 2099) X-Menby shakaThis the story of Logan's grandson,
In the year 2099 after a great war that resulted in the destruction of most of humanity, a quiet young man appear ...3 comments |
![[X-Force X-23] Custom made mask, replaced the hair from one from my fodder stock, and a full paint job.](userimages/customs/45000/44663-1.jpg) X-Force X-23 X-Forceby shakaCustom made mask, replaced the hair from one from my fodder stock, and a full paint job....2 comments | ![[Crimson Armor Artemis] Basically, a custom made bow, and full paint job.](userimages/customs/45000/44642-1.jpg) Crimson Armor Artemis |
![[X-Force Iceman] I replaced the head with one from an Aquaman figure, removed the wings and filled in the holes, custom made the glasses, and finally a full paint job with ice effects for the left arm.](userimages/customs/45000/44641-1.jpg) X-Force Iceman X-Forceby shakaI replaced the head with one from an Aquaman figure, removed the wings and filled in the holes, custom made the glasses, and finally a full paint job ...2 comments | ![[X-Force Rogue] I modified the front of the suit, custom made the glasses, and a full paint job.](userimages/customs/45000/44586-1.jpg) X-Force Rogue |
![[Vision] Custom glow in the dark paint job with a modified cape.](userimages/customs/45000/44585-1.jpg) Vision | ![[Oracle] I removed the hat, medallion, and used a modified hood from my fodder bin to go over his head, Dremeled down the details on the cloak, sanded down the eyes and sculpted new ones, repainted the entire figure, and stand.
Finally, I added eyebrows and some accents made of styrene.
The wand was made from scratch.](userimages/customs/45000/44553-1.jpg) Oracle Masters of the Universeby shakaI removed the hat, medallion, and used a modified hood from my fodder bin to go over his head, Dremeled down the details on the cloak, sanded down the...3 comments |
![[Midas BATMAN] New cape, custom stand, some apoxy, and a full paint job....simple but eye catching!!!](userimages/customs/45000/44525-1.jpg) Midas BATMAN Batmanby shakaNew cape, custom stand, some apoxy, and a full paint job....simple but eye catching!!!...1 comments | ![[Black Lantern BATMAN] Same recipe as Supes, engraved the Black Lantern Symbol, and a full paint job.](userimages/customs/45000/44522-1.jpg) Black Lantern BATMAN Batmanby shakaSame recipe as Supes, engraved the Black Lantern Symbol, and a full paint job....2 comments |
![[Clone Superman] Removed the cape, and filled in the holes, carved the "S" symbol, and the shoulders, retooled the belt, added details in Apoxy (hair, gloves), and finally a full paint job.](userimages/customs/44500/44482-1.jpg) Clone Superman Legion of Superheroesby shakaRemoved the cape, and filled in the holes, carved the "S" symbol, and the shoulders, retooled the belt, added details in Apoxy (hair, gloves...2 comments | ![[White Lantern Superman] Engraved the White Lantern symbol, and did a full custom paint job.](userimages/customs/44500/44481-1.jpg) White Lantern Superman |
![[Falser] Another original character.
Build by Man-At-Arms, FALSER was created to confuse, and destroy Faker.
Scratch build chest armor, removed the hood to repaint the head, custom painted fodder weapon, and full custom paint job.](userimages/customs/44500/44441-1.jpg) Falser Masters of the Universeby shakaAnother original character.
Build by Man-At-Arms, FALSER was created to confuse, and destroy Faker.
Scratch build chest armor, removed the hood to r...1 comments | ![[Scareglow] Continuing with the old figures, this one is made from a 2000X Skeletor with a modified head, and ribs from a Halloween figurine, the bandages are Apoxy, the cape is made out of thin vinyl, and the skeleton was painted with a mix of white and glow in the dark paint.
The weapon was entirely build from scratch.
Enjoy it!!!](userimages/customs/44500/44440-1.jpg) Scareglow Masters of the Universeby shakaContinuing with the old figures, this one is made from a 2000X Skeletor with a modified head, and ribs from a Halloween figurine, the bandages are Apo...1 comments |
![[Black Lantern Star Sapphire] Disassemble it entirely, engraved the logo on her abdomen, and a full custom paint job.](userimages/customs/44500/44312-1.jpg) Black Lantern Star Sapphire | ![[Dark Ironhide] Custom made decals and a full paint job.](userimages/customs/44500/44311-1.jpg) Dark Ironhide |
![[Faker] Continuing with the forgotten series this is my version of Faker!!!
I engraved the chest plate (it took a looooong time to do this part), and continuing with a full paint job including removing the hair for a better finish, painting the sword and chroming the chest plate.](userimages/customs/44500/44285-1.jpg) Faker Masters of the Universeby shakaContinuing with the forgotten series this is my version of Faker!!!
I engraved the chest plate (it took a looooong time to do this part), and continu...1 comments | ![[GL Soranik Natu] Removed the skirt, cape, Dremeled down the knee pads and the gloves, filled in the holes left from the cape,added the power ring, and did a full custom paint job with mix colors including a hand painted glow in the dark GL logo and face tattoo.](userimages/customs/44500/44284-1.jpg) GL Soranik Natu Green Lanternby shakaRemoved the skirt, cape, Dremeled down the knee pads and the gloves, filled in the holes left from the cape,added the power ring, and did a full custo...5 comments |
![[Darth Vader Gold Edition] This is from a series of older custom that I forgot to post when I changed computers.
It is a repaint, (and upgrade of the head) to create a figure to display next to the silver Darth Vader TRU Exclusive.](userimages/customs/44500/44214-1.jpg) Darth Vader Gold Edition Star Warsby shakaThis is from a series of older custom that I forgot to post when I changed computers.
It is a repaint, (and upgrade of the head) to create a figure to...5 comments | ![[Batman beyond Batmobile (Movie Style)] I took it entirely apart, removed the missile launch mechanism, side panels, engine cover, rear and top fins, wheel hubs, and canopy.
I replaced the side panels with solid plastic sheets, build new wheel hubs, and engine panel. The rear fins were made from styrene.
The next step was to modify the sides, front, instruments panel, and top of the vehicle using Apoxy Sculpt, styrene, and clear plastic. The Bat-logo was also made from clear plastic.
The last step was to paint the exhaust with chrome paint, and the vehicle with black metallic and flat automotive paint, and finally painted the clear plastic, and seat with translucent red, and yellow Tamiya.](userimages/customs/44000/43722-1.jpg) Batman beyond Batmobile (Movie Style) Batman Beyondby shakaI took it entirely apart, removed the missile launch mechanism, side panels, engine cover, rear and top fins, wheel hubs, and canopy.
I replaced the s...6 comments |
![[Andromeda Shun God Cloth V1] I took the head off the figure, repainted the eyes and hair, I sculpted the tiara with Apoxy and styrene, and painted it with metallic pink, and gold. Next I stripped off the original paint and drew the stencils for the pattern on the armor, airbrushed the patterns in metallic gold, and then mask them to apply the metallic pink to all the pieces.
I applied a Swarovski crystal accent to the head piece
I build the Nebula chain from scratch.
The final step was to top coat both the figure and the armor.](userimages/customs/43500/43439-1.jpg) Andromeda Shun God Cloth V1 Saint Seiyaby shakaI took the head off the figure, repainted the eyes and hair, I sculpted the tiara with Apoxy and styrene, and painted it with metallic pink, and gold....2 comments | ![[Phoenix IKKI OCE V.1] I started by taking the figure apart, and repainting the body in white, next I stripped off the original paint from the armor, and re-sculpted the chest piece, sculpted the tiara with Apoxy and styrene, sculpted the feet, knee pads, and painted the entire armor with metallic orange.
I repainted the eyes, and hair and added a Swarovski crystal accent to the head piece.
the final step was to top coat the armor and figure.](userimages/customs/43500/43434-1.jpg) Phoenix IKKI OCE V.1 Saint Seiyaby shakaI started by taking the figure apart, and repainting the body in white, next I stripped off the original paint from the armor, and re-sculpted the che...2 comments |
|