![[Satana - Thunderbolts] Hi guys,
Here is Satana in her Thunderbolts outfit. Another one for Rick although I am working on another for my own collection. Still a couple of things I will be adding before sending this one off but figured I may as well show the actual figure.
Recipe:
Head - Hope Summers
Upper torso - Hope resculpted
Lower Torso - Skrullektra
Arms - Shield agent
Hips and upper thighs - SOTA Ryu
Lower thighs - Buffy figure
Lower legs - Psylocke
Hair - Razorclaw and sculpt
The torso has been extensively modded and resculpted to give extra articulation in the crunch and her hips widened.
Thigh balls from Ryu with upper thighs joined to Buffy figure legs and shaped to fit.
Seams are cotton sealed with superglue.
Hope you like her.
:)
Updated with alt evil aspect head.](userimages/customs/43000/42759-1.jpg) Satana - Thunderbolts | ![[Lady Deadpool] Hey guys, here is another of my recent customs. Lady Deadpool. Seen a few different versions on here but figured I might as well have a crack anyway.
Body - Shield Maria Hill
Legs - Xmen classics Gambit
Head - Maria Hill resculpted
Hair - Ripclaw
Straps - Various
Torso has been altered with large balljoint for increased mobility and then painted up with GW paints.
Enjoy.
:)](userimages/customs/42500/42083-1.jpg) Lady Deadpool |
![[Daredevil] A really nice and quick custom knocked up while waiting for sculpt to dry.
Base - Bucky cap
Shins - Jigsaw
Belt, logo and detail - Styrene strip.
Cheers for looking guys.](userimages/customs/42500/42020-1.jpg) Daredevil | ![[Joystick - Thunderbolts] Here is my latest custom, this one was made for Big Rick to fill out one of his many many Tbolts teams.
This one was another experimental base with a fairly unusual recipe, the aim being to get a pretty high range of motion to suit the character;
Head - Savage She Hulk
Upper torso - Skrullektra
Lower torso, crotch, upper thighs - SOTA Cammy
Lower legs - Wasp
Feet - ML BW 45degree mod
Gauntlets/Hip-dodad - Styrene and sculpt
Power rods - Styrene rods
She was a bit of a challenge as above the crotch the entire lower torso was sculpted, the upper torso was hollowed out and a barbell balljoint added to increase the range of motion.
Thanks for looking guys.](userimages/customs/42500/42014-1.jpg) Joystick - Thunderbolts |
![[Hulk] I wanted a really big hulk. Now I have one.
Torso - Validus?
Shoulders - Abomination
Arms - HOM Hulk
Upper Thighs - Gamma hulk
Lower legs & Knees - HOM Hulk
Head - Sculpted
A bit of a mix of parts and needed quite a lot of sculpt to try and make all of the textures fit. Either way I now have a hulk I'm happy with for now.
Cheers
*fixed some of the pics now.
Due to need This will now go on the bay.](userimages/customs/41500/41073-1.jpg) Hulk | ![[Union Jack] A nice simple repaint this time. Swapped the head for a re-sculpted Ronin head, lower legs for ultimate cap, modded the belt and repainted.
The lines were a bit annoying but they will do for my needs.
Hope you like.](userimages/customs/41500/41059-1.jpg) Union Jack |
![[Iron Fist] So the official Iron Fist release didn't really appeal to me. I wanted to make my own but wasn't too keen on any of the current base bodies for a martial artist so I had to frankenstein this.
Torso - Sinestro (resculpted)
Soulders & upper arms - DCUC Mercury
Forearms - ML Yellowjacket
Crotch - ML Bullseye
Thighs and Hips - ML Ronin
Knees and Elbows - Madman
Lower legs - ML Iron Fist/ML Bullseye
This took a fair bit of sculpting in order to blend everything the way I wanted it. Painted the fella up but he is a bit of a pain for joint rub.
Either way he'll do for my shelf.
Cheers](userimages/customs/41500/41058-1.jpg) Iron Fist | ![[Taskmaster] Another quickie while waiting for things to dry.
Bucky Cap - Base
FO Red Skull - Head
SMC goblin - Hood & Cape
Moonknight - Other hood
Deathstroke - Belt
Random fodder for weapons and stuff, will most likely update when I have more time.
Again, sorry about the pictures, a bit of a rush job.
:)
Cheers](userimages/customs/41000/40955-1.jpg) Taskmaster |
![[Deadpool] Just a couple of pretty quick customs at the moment, fillers while I work on more involved stuff.
Here is another Deadpool made from a bucky cap base. Sanded cuffs and sculpted boots, Ronin head resculpted, straps from a number of sources and all removeable.
Sorry about the pics.
Cheers.](userimages/customs/41000/40954-1.jpg) Deadpool | ![[Moonstone] Here is another of my experiments to make an articulated female base from the Hasbro female. This time Moonstone from the thunderbolts.
recipe;
Elektra with the torso twist replaced with a barbell joint to increase articulation.
Lower legs from wasp and feet from black widow, I have dremeled to give them the new Hasbro foot articulation.
Head is from a resculpted Buffy figure with hair from a movie Pheonix.
thighs have been thickened and crotch dremeled to increase range of motion.
Painted in silvers and golds and given a gloss varnish, not really pleased with the finish but it will do for my shelf.
Cheers for looking.](userimages/customs/41000/40531-1.jpg) Moonstone |
![[Spider Woman] This is one of my attempts to make the standard Hasbro body look a bit more natural. I took the Elektra body and popped the top off, dremmeled the hell out of the inside of the upper torso and rounded off the lower to give a more countersunk fit before embedding a barbell joint to connect them.
I also dremmeled a load of plastic from between the legs and thickened the thighs and hips a bit.
Head from the factory Spider Woman with socket built up from green stuff and a wig from Miho from sin city. Lower legs from Psylock then a quick coat of paint.
Now she can stand in poses that suit a spiderwoman.
Thanks again for looking guys.](userimages/customs/40500/40276-1.jpg) Spider Woman | ![[Fixer] So I needed a Fixer to go with my Thunderbolts and but wanted him to have a slimmer, sleeker build. I used a Human Torch base with lower legs from Longshot. Took a head from DCUC Sinestro with a resculpt (most obviously the great bit eye piece) arm jobbies from MS ultimate Iron Man and one shoulder pad from omega red (hinged with revoltech joint) and the other from a movie Iron Man, Styrene for the seams and antena thingomies.
Quick paint job with GW paints and I have me a Norbert actoin figure. Not as detailed as some I have seen but suits my needs.
Cheers for looking.](userimages/customs/40500/40255-1.jpg) Fixer |
![[Doc Strange] So this was a bit of a quick one. Some frankensteining went on here,torso is a cast of a SOTA figure, legs from a human torch and shins from a parachute Spiderman, the arms come from an ultimate Wolverine and head from Doc Strange with a bit of sculpting. Details from strip styrene and coat is a rubber glove.
Quick paint job and done.
Cheers for looking.](userimages/customs/40500/40254-1.jpg) Doc Strange | ![[Nick Fury] This should have been a really simple headswap/repaint but the neck length on the two Furys is so different that I ended up dremmeling most of the inside of the head away.
He was too lanky so I took a bit of his ankles away. This made me see his arms as too long so I then wanted to use different arms. DCUC Captain Cold arms with the forearms re-sculpted went on meaning a load more dremmeling in the sockets to make it fit.
Then a quick repaint with GW paints and done.
Yay.](userimages/customs/40500/40211-1.jpg) Nick Fury |
![[Black Widow] The paint on this is a little rough as she was mainly an experiment in articulation and silhouette. I was a bit gutted with the skinny legs on the Hasbro female body and wanted a super spy who may actually be able to stop a pig in a hallway.
I pretty much robbed the recipe from a guy I saw on the fwoosh who used the bottom half of a revoltech figure, but I can't remember who it was, sorry.
Either way it means rebuilding the torso part with putty and dremmel the hell out of the inside of the upper torso.
Thanks](userimages/customs/40500/40210-1.jpg) Black Widow | ![[Luke Cage] OK, so this is my take on Luke Cage in Thunderbolts.
Torso and upper arms from f.o. Sabretooth re sculpted a wee bit, lower body from Drax. Forearms come from some DCUC figure and fists from Mr Terrific. Head is from the ML cage figure shaved down.
Bit of milliput and a bit of green stuff for the belt and bracers.
Cheers](userimages/customs/40500/40166-1.jpg) Luke Cage |
![[Blade] I made me a Blade figure from a bunch of different punishers, the torso is faceoff the thighs, crotch and arms are from the nemesis punisher and the lower legs from a Tom Jane punisher.
Head is mr Terrific with a shave and the right forearm is from Adam Warlock for the wrist joint.
Torso and crotch are joined by a barbell balljoint so articulation is retained.
Again the pic quality isn't the best but it's as good as I could get until I get set up a bit better.
Thanks.](userimages/customs/40500/40157-1.jpg) Blade | ![[Constrictor] Here is my version of Constrictor. Not keen on the factory release with vampire teeth and x gen bullseye body so I made another.
He is made of FO punisher upper with ronan thighs and a Chris bale batman head. His forearms are the factory release.
Thanks](userimages/customs/40500/40129-1.jpg) Constrictor |
![[Deadpool] Hello, been away from customizing for a fair while now and thought I would get a few done to get back into practice.
This is a pretty well used recipe of a DP made from a face off punisher with a re-sculpted moon knight head, forearms from two pack forge and various bits of fodder accessories.
Sculpting done with green stuff ad painted with GW paints.
Thanks](userimages/customs/40500/40126-1.jpg) Deadpool | ![[Captain Britain] All superman blue with a bit of sculpt and a slap of paint.](userimages/customs/10000/9777-1.jpg) Captain Britain |
![[Anthony Stark] Made from a deluxe Angel with a modded first apearance I'm Head](userimages/customs/10000/9775-1.jpg) Anthony Stark | ![[Ares] Just a face off Sapertooth with conan hands wraal boots a misc head and a ton of milliput.](userimages/customs/10000/9694-1.jpg) Ares |
![[Iron Man] Just a House of M I'm with modern I'm hands and a modded modern I'm head and shoulder pads.
Paint silver then clear colours.](userimages/customs/10000/9693-1.jpg) Iron Man | ![[Maria Hill] Sue Storm body, movie pheonix head and greenstuff](userimages/customs/7500/7331-1.jpg) Maria Hill |
![[Another SHIELD Guy] Used heavily dremeled jigsaw bodies with various heads, sculpt and fodder.
And when these are done I don't ever want to have to paint white onto black ever again.](userimages/customs/7500/7330-1.jpg) Another SHIELD Guy | ![[Shield guy] And now some of my S.H.I.E.L.D agents. More to come in the next few days.
I have six of these guys and a Maria Hill to finish/put up in the next few days. Started them about 4 or 5 days before the 2 pack pics showed up but what the hell, you can never have too many army builders.
Used punisher bodies and heavily dremeled jigsaw bodies with various heads, sculpt and fodder.
And when these are done I don't ever want to have to paint white onto black ever again.](userimages/customs/7500/7313-1.jpg) Shield guy |
![[War Machine] Hello people. A while since I put any customs on here.
Thanks to Bigraj for the base and a shout to Kirk for making one of these for me to blatantly rip off.
War machine.
He is a DC mongul base with Warmachine head, Omega red hands, new ball jointed mounts for the shoulder gear and magnetic interchangeable wrist weapons.](userimages/customs/7500/7291-1.jpg) War Machine | ![[Lady Deathstrike] I think its fairly self explanitary.
I just hope she's not so funny looking now.](userimages/customs/3500/3353-1.jpg) Lady Deathstrike |
![[Deadpool] Everyone has to post one of these.
Everyone has to make one.
Everytime I buy a MoonKnight he just stands there saying "Make me int a Deapool man"
So I do it and now I have no MoonKnights....](userimages/customs/3500/3343-1.jpg) Deadpool | ![[DareDevil] Its a DareDevil with a much used recipie.](userimages/customs/3500/3340-1.jpg) DareDevil |
|