![[Mighty mightor] He's a repaint but his mask and cape are sculpted and the loin cloth is also sculpted.](userimages/customs/7500/7066-1.jpg) Mighty mightor | ![[Bird Man] A simple repaint but the head needs sanding to get a snug fit.](userimages/customs/7500/7065-1.jpg) Bird Man |
![[Vaporman] He is another simple repaint, he has the smaller jlu body type.](userimages/customs/7500/7064-1.jpg) Vaporman | ![[Gravity Girl] She's a simple repaint with sculpted hair.](userimages/customs/7500/7063-1.jpg) Gravity Girl |
![[Meteor Man] This was a task i shall never forget. I removed the head and used one from a marvel chacter then his hands were replaced to show powers by a ben 10 figure. I had to frankenstein most of him and sand away the tie-ins. But it was fun.](userimages/customs/7500/7062-1.jpg) Meteor Man | ![[Princess ariel] Shes a simple repaint with sculpted hair. Keep it simple.](userimages/customs/7500/7061-1.jpg) Princess ariel |
![[Thundarr] The first thing was the boots i removed the ones on nemesis and replaced with the bulky ones of steel. Then i sculpted on the suit and changed the hair.](userimages/customs/7500/7060-1.jpg) Thundarr | ![[Ookla] Heres a custom I completed after the sidekicks contest. He is a steel body with a sculpted head. I'm doing a complete set of hanna barbera characters for my collection. The heads the trick part. I just try to create what i saw. Considering its my first real sculpting job i am pleased with his results](userimages/customs/7500/7059-1.jpg) Ookla |
![[Blue Falcon] in order to keep it simple I combined supes' top half with batman's. after sanding him down I then sculpted the head addition on and trimmed the cape and painted. he's the 5th installment for my hanna barbera heroe's. I loved them groing up and hated they never made action figures until recently.](userimages/customs/6500/6495-1.jpg) Blue Falcon | ![[The Annihilator v4] The annihilator version 4 is mainly about size. The previous versions were too small to truly represent a better likeness to the cartoon. First thing spawn is stripped down to a flat smooth surface. Everything must go. After doing stripes i felt with simple modifications he would be perfect. All his armor with exception to the shoulder attachments is sculpted, the skirt or loin part is cut from a 10 inch supes cape then sculpted over with epoxy. I didn't change his boots as i'm not that experienced yet so for now they suffice. He's big, bad and ready for annihilation. First stop hades!](userimages/customs/6500/6474-1.jpg) The Annihilator v4 |
![[Speedy] This one is given a hair cut and resculpt, then the belt and hair are added with epoxy. Finally repaint to the jlu cartoon patriot act. He looks very good in the ranks.](userimages/customs/6500/6406-1.jpg) Speedy | ![[Jan and Jace] jace is a repaint with sculpted hair, and twin sister jan is supergirls head stripped and given a ponytail then attached to wonder womans body. simple but fun and very rewarding.](userimages/customs/6500/6399-1.jpg) Jan and Jace |
![[S.t.r.i.p.e.s.] S.t.r.I.p.e.s., the only adult sikekick in the jlu. the first thing to go is all omega's details, I stripped him down and the resculpted the details for stripes with epoxy. making sure to get the under armor matched to the outer part. next I gave him a base prime white coat three times to get it deep and even after sanding. next I added the details as depicted in the chaos at the earth's core episode. sealed with matte finish he came out very well I think.](userimages/customs/6500/6215-1.jpg) S.t.r.i.p.e.s. | ![[Dr. Strange Fate] My first ones cape was to short but he looked pretty good. The second i used supes cape cut at the top and glued to dr. Fates top portion. The details are epoxy. Just repaint and seal. I included both cause there were aspects from ea that i liked.](userimages/customs/5500/5433-1.jpg) Dr. Strange Fate |
![[Spiderboy] He was another in depth custom that i liked from dc vs marvel. After sculpting on the coat and mask. I painted ans seled the body before addind the coat. Leg band is a rubber band and the pouch is from the fodder box. This one is a fun one to do.](userimages/customs/5500/5432-1.jpg) Spiderboy | ![[Batman Beyond] I was using the pld version with bats but it looked to big for terry. I saw this one done by airmax the best customizer i've seen. But after attaching the ears and glove spikes heis a simple repaint. But he looks closer to terry.](userimages/customs/5500/5431-1.jpg) Batman Beyond |
![[Super-Soldier] The anti amazo supes has the shield and it only needsto be painted. I prefer the older bases that have no elbow or knee joints. Easier to sand and paint. No sculpting i just sande the back of head to resemble a mask. The red and white lines are harder than they appear with the surface so uneven. Just go extra slow to get it right.](userimages/customs/5500/5418-1.jpg) Super-Soldier | ![[Cyborg Superman] The heads must be cut and reattached evenly. Then after the boil and pop method i used to separate i used stas supes legs and the jlu supes arm and head. Frankenstiend without a doubt. But he came together nicely. I'm sure there are other recipies but this one was fairly simple.](userimages/customs/5500/5417-1.jpg) Cyborg Superman Supermanby Dirty South CustomsThe heads must be cut and reattached evenly. Then after the boil and pop method i used to separate i used stas supes legs and the jlu supes arm and he...1 comments |
![[Flash - Justce Lords] Heres another one i found at dcu animated. With the colors on my first i tried to get closer to the pictured one. But my second one i went with black. I think it was more suited to the other figures.](userimages/customs/5500/5416-1.jpg) Flash - Justce Lords | ![[Aquaman - Justice Lords] After removing the hair its sculpted back in a crew cut style my first one, the second i used the front portion of his original hair and sculted the back. He was based on a dcu animated pic i found web surfing.](userimages/customs/5500/5415-1.jpg) Aquaman - Justice Lords |
![[Negative Man - Doom Patrol] The mummy effect was achieved using rubber bands. It was not the easiest thing to do. But it does look ragged. Bootcuff are rubberbands. The alter being is a fast food supes i can't remember which maybe jack in the box. Sanded down and repainted.](userimages/customs/5500/5414-1.jpg) Negative Man - Doom Patrol | ![[Beast Boy - Doom Patrol] After shaving his hair i rounded with epoxy and sanding. I saned the mask until there was a very fine line just a hint of the mask rb for the bootcuffs and the mask extensions were sculpted. The raptor was a jp sanded lightly to leave detail but hold the paint. He was very fun to do.](userimages/customs/5500/5413-1.jpg) Beast Boy - Doom Patrol |
![[Elasti-Girl - Doom Patrol] I sculpted the hair and dress after sanding off all dianas details. I used her cuff to make the perfect glove effect. Rubber bands were used for the boot cuffs.](userimages/customs/5500/5412-1.jpg) Elasti-Girl - Doom Patrol | ![[Robot Man - Doom Patrol] Strip him down to his base then i used epoxy to fill in the holes. I used epoxy to extend the bottom jaw. Rubber bands were used for the head band and the chest straps and the cam is sculpted.](userimages/customs/5500/5411-1.jpg) Robot Man - Doom Patrol |
![[Mento - Doom Patrol] Its a simple paint job the hat or headgear is a small rubberband the antena are little skikes off a koosh ball? I'm not sure if thats right. But its very easy this way and results will be better if kept simple.](userimages/customs/5500/5410-1.jpg) Mento - Doom Patrol | ![[Rogue] Ok now i had a ww head and a black canary body, no sense letting them sit they came together great for the southern sass rogue. I resculpted the hair in the front paonted her and the details then i sealed her. Then carefully i added a coat from an animated witch blade.](userimages/customs/5500/5409-1.jpg) Rogue |
![[Storm] The key here is the head swap. The bc head should be sanded till its a smooth fit. The hair is a major factor as well because it is going to be in the way so it must be secured in addition to the head. Sand her down and paint the details and the skin tone. Left the eyes white as when shes in battle. This was a chance for me to start my dc vs marvel collection from the awesome comic. Amalgam universe is next](userimages/customs/5500/5408-1.jpg) Storm | ![[Jason Blood] This one is probably the only one you will see he's not very popular but it was a challenge I needed to take. I kept it simple after failing miserably on his clothes I landed on clark kent from stas. so I took the head from my failed attempt and replaced clark's with hawks head. sculpted the hair and that was it. often times less is better.](userimages/customs/5500/5323-1.jpg) Jason Blood |
![[Micron] This is another simple repaint. His eyes are epoxy. Hand painting his emblem is the toughest part. I don't have a printer so decouping is out. But i'm sure it will be worth it.](userimages/customs/5500/5322-1.jpg) Micron | ![[Aquagirl] All she needs after sanding is her hair to get it more stable i used the hair to put added security on the head. My first attempt was without and the head neck tie in looks off. But when i gave her the hair over her shoulder it made the whole look better.](userimages/customs/5500/5321-1.jpg) Aquagirl |
|