![[Adam Warlock] So here is the final peice in my Infinity Pie, the fearless leader Adam Warlock! pretty straight forward really, used Sculpey for the Soul gem, and a little Apoxie on the face to get rid of the mask lines from Mar-Vell. sculted the cape clasp out of Apoxie and made the staff from Apoxie as well. painted it all and voila! the cape is another mod on my Drax cape, but I ran a wire through the whole edge coz I always loved the way that warlock would wrap himself up in it. besides, you have to look your best when relinquishing omnipotence right?!](userimages/customs/5000/4676-1.jpg) Adam Warlock Infinity Watchby zennlavianSo here is the final peice in my Infinity Pie, the fearless leader Adam Warlock! pretty straight forward really, used Sculpey for the Soul gem, and a ...2 comments | ![[Moondragon] Here is the possessor of the Mind gem,and daughter of Drax the Destroyer... It's the mighty Psy-chick Moondragon! uses a Psylocke and ripped off the hair, sculpted the head, ears, Mind gem, and gloves, then I gave her a complete repaint( as always) with some shading on her legs, arms, and chest. used a modified version of my Drax cape which is glued toher neck. hardedst part was sculpting the ears. Next on the Block will be Adam Warlock so Watch out!](userimages/customs/5000/4675-1.jpg) Moondragon Infinity Watchby zennlavianHere is the possessor of the Mind gem,and daughter of Drax the Destroyer... It's the mighty Psy-chick Moondragon! uses a Psylocke and ripped off the h...6 comments |
![[Pip The Troll] Here is the third member of my Infinity Watch series. Pip The Troll is the carrier of the Space Gem. I used an old school Tatanka figure and gave him an extreme makeover!! cut of the arms and dremmelled away his earings and mullet hair. then I sculpted new shoulder so the arms could be at his sides and sculpted his pot belly, ears, hair, boots and robusto cigar. all done with ApoxieSculpt. also I drilled a little hole between his fingers for the cigar! next up for the Watch will be Moondragon.I've included a photo of the original figure for your curiosity.](userimages/customs/5000/4674-1.jpg) Pip The Troll Infinity Watchby zennlavianHere is the third member of my Infinity Watch series. Pip The Troll is the carrier of the Space Gem. I used an old school Tatanka figure and gave him ...3 comments | ![[Animoid Row] I said I'd post this when it was finished so here it is. the animoid row diorama for my Rick Deckard custom. Just a perspex box with the Sculpy street lamp and a spliced photo backdrop of a street scene and hovercar from the film.](userimages/customs/5000/4673-1.jpg) Animoid Row Blade Runnerby zennlavianI said I'd post this when it was finished so here it is. the animoid row diorama for my Rick Deckard custom. Just a perspex box with the Sculpy street...0 comments |
![[Drax the Destroyer] Here is the second figure in my Infinity Watch series, the holder of the Power gem, Drax the Destroyer. this is him in his classic outfit. pretty simple, but time consuming. cut off dragons fin, sculpted the belt, cape clip and Bracers with apoxie. also filled in the laces and adidas stipes on the shoes, but I liked the toe so I kept it as is. then a little more apoxie in the ears, and the swashbuckler boot tops. I knew I wanted a cloth cape, and I can sew fine but I suck at patterns, so I enlisted the help of the best pattern maker I know, my mother (PROPS!!!). used a little wire in the collar and voila!! Drax the Destroyer is alive and ready to kill Thanos!! Even if, for the duration of Infinity Watch, he remains to be a brain dead idiot! hope y'all like it, and watch out for PIP the Troll who's next on the agenda.](userimages/customs/5000/4526-1.jpg) Drax the Destroyer Infinity Watchby zennlavianHere is the second figure in my Infinity Watch series, the holder of the Power gem, Drax the Destroyer. this is him in his classic outfit. pretty sim...8 comments | ![[Glenn Danzig] Kyle Robinson's Danzig is the whole reason I started customizing. The Misfits have been my favorite band since I was twelve years old and I have always wanted a Danzig figure. So when I saw Kyle's one I Flipped out as lo and behold, the source material is my very favorite Danzig photo ever!!! so when I finally got my hands on some apoxie sculpt I went for it. Did pretty much the same thing as Kyle's recipe, exept I gave the shirt a grey dry brush to make it look a little faded and I left an eye exposed which I painted a ghoulish white with a black pupil. Also the wondy I had doesn't have great balance so I made a fold back amp out of sculpy for him to rock out on! I'll put some pics of that in the forum. so I hope you all enjoy, and thanks to Kyle Robinson for the inspiration for what is easily my favorite figure in my 6" collection, custom or otherwise.](userimages/customs/4500/4424-1.jpg) Glenn Danzig Misfitsby zennlavianKyle Robinson's Danzig is the whole reason I started customizing. The Misfits have been my favorite band since I was twelve years old and I have alway...31 comments |
![[Rick Deckard w/ Animoid Row Diorama] I made this one for my brother for his birthday coz he's a huge fan. so here is my ode to the greatest sci-fi movie of all time... Blade Runner. sculpted the shirt, belt and blaster with sculpey; ApoxieSculpt was used to fill the holes for dock's tentacles and sculpt the coat collar. dremelled away certain parts of the coat to get rid of the two-coats effect and make it look like Deckard's suit jacket underneath. also I dremelled away at the face to get rid of some of the Alfred Molina puffiness and give a more accurate likeness by straightening the nose and getting rid of the double chin and jowls. used photo's and the DVD to get the costume right, and I'm proud to say that everything (including the wacky shirt) is pretty darn accurate to the movie. The Diorama I did inbetween sessions and is from sculpey. it's not the right shape but the pedestrian lights are accurate to the film. I will post the diorama on it's own in the future for a better look as it has a photographic background](userimages/customs/4500/4381-1.jpg) Rick Deckard w/ Animoid Row Diorama Blade Runnerby zennlavianI made this one for my brother for his birthday coz he's a huge fan. so here is my ode to the greatest sci-fi movie of all time... Blade Runner. sculp...15 comments | ![[Gamora] I decided I wanted to do an infinity watch series so I started with the easiest one I could think of. so here she is... the deadliest woman in the universe.... GAMORA!! uber simple, just a repaint and some sculpey (my first time sculpting so be nice!). in retrospect I think using some skulls from Mystique's belt would be best for the ones on Gamora's chest, but I didn't have a Mystique. just modified the belt a little and added the bubbles to it. I just did some choice areas in that criss cross pattern of hers to give it the right feel without making myself myopic from doing the whole thing. The hardest part was painting the face and getting nice crisp lines. when I find a cool dagger I'll probably give to her but otherwise I'm pretty happy with the result! keep an eye out for the rest of the team, that would be Drax, Pip, Moondragon, and Adam Warlock of course. Enjoy!](userimages/customs/4500/4307-1.jpg) Gamora Infinity Watchby zennlavianI decided I wanted to do an infinity watch series so I started with the easiest one I could think of. so here she is... the deadliest woman in the uni...5 comments |
![[Ultron] g'day, this is my third custom and my first use of my new dremel (Black and Decker actually). hated the ultron fig from mervel so I thought I'd give it a go! saw that there was a robots contest so what the hell, I'll throw 'er in! just decapitated the ML ultron glider head and put it on the UIM bod. gave him some green on the chest and some red in the guns and hand ports etc. also I put some "smoke" which is just a clear grey in some spots on the lower abdomen and on the chassis. I decided to use two tones of the silver, chrome and titanium. just thought it would give him some more depth and it looks like maybe he's an ultron with a little bit of adamantium reinforcment! hope you like my first forray into the ranks of the power tool users! thanks blokes!](userimages/customs/4500/4251-1.jpg) Ultron Marvel Legendsby zennlaviang'day, this is my third custom and my first use of my new dremel (Black and Decker actually). hated the ultron fig from mervel so I thought I'd give i...8 comments | ![[Annihilation Super Skrull] I really liked the look of the super skrull in annihilation so I just made an outfit from leather and painted it. I think he has a utility belt in the comic but I like the look I came out with anyway.](userimages/customs/4500/4010-1.jpg) Annihilation Super Skrull Marvel Legendsby zennlavianI really liked the look of the super skrull in annihilation so I just made an outfit from leather and painted it. I think he has a utility belt in the...3 comments |
![[Red Skull] howdy, I'm a big time legends colector but this is my first attempt at a custom to I went for something easy with a lot of previous axamples. I really hated the FO red skull and the ML V one is waay too pricey, not to mention the articulation of a catholic schoolmaster! was worried to start with as I thought the HOM head was gonna have to be cut off but turned out to be as easy as a head swap goes(I can assume). didn't do much different from other ones of tis recipe out there, except I did use a darker grey on the pants. hardest part was doin that damned swasticka so small! any who, as this is my first, I would appreciate any feed back you veterans have to offer! thanks.](userimages/customs/4500/4009-1.jpg) Red Skull Marvel Legendsby zennlavianhowdy, I'm a big time legends colector but this is my first attempt at a custom to I went for something easy with a lot of previous axamples. I really...6 comments | |
|