![[Scorpion] my next figure in my line of 7 inch mortal kombat figures is Scorpion. he started as a arkham city Ra's al ghul. I used citadel green stuff to sculpt the out fit and sculpted on the ra's head to create scorpions mask. I then sprayed him with citadel chaos black then dry brushed his detail. I used a sword from a elder predator and sculpted the skull on the sheath. I then made a spear of fear using a chain and looping a twist tie through it so it could be posed and pegged into his wrist. I used a random knife blade and painted the entire thing. Hope you enjoy and thank you for looking.](userimages/customs/50000/49692-1.jpg) Scorpion Mortal Kombatby pyramidhead22my next figure in my line of 7 inch mortal kombat figures is Scorpion. he started as a arkham city Ra's al ghul. I used citadel green stuff to sculp...3 comments | ![[Spartan 117 John the Master Chief] continuing my line of spartans based on those in the halo universe mainly from the book the fall of reach i finish with the master chief. I wanted to give him a look of a mix of all versions seen through out the game series. i have always been a fan of the original helmet so i used a spirit of red team helmet and the halo 4 chief body. I then used various different spartan armor pieces. I finished with a paint job and hope you enjoy](userimages/customs/50000/49573-1.jpg) Spartan 117 John the Master Chief Haloby pyramidhead22continuing my line of spartans based on those in the halo universe mainly from the book the fall of reach i finish with the master chief. I wanted to...2 comments |
![[Morrigan] I wanted to create a version of morrigan that appeared in the promo movie dragon age sacred ashes. I started with a arkham city harley figure and used various pieces from the dc morrigan figure. I then sculpted a hood using citadel green stuff and gave her a paint job. enjoy.](userimages/customs/50000/49572-1.jpg) Morrigan Dragon Ageby pyramidhead22I wanted to create a version of morrigan that appeared in the promo movie dragon age sacred ashes. I started with a arkham city harley figure and use...6 comments | ![[The Grey Warden] This is a version of my Grey warden from the game dragon age. I started with a dragon age loghain base figure and used a modern starman head. I used citadel green stuff and sculpted hair and made a sheath for his custom great sword which was made from various different pieces. I then used some small chain and made the ring given to him by the character morrigan. enjoy.](userimages/customs/50000/49571-1.jpg) The Grey Warden Dragon Ageby pyramidhead22This is a version of my Grey warden from the game dragon age. I started with a dragon age loghain base figure and used a modern starman head. I used ...1 comments |
![[Mileena] I updated photos of this custom hope you enjoy...
I've been in a mortal kombat mood lately and my favorite character in it is Mileena. i've also seen some very amazing figures of her and decided to attempt one my self. I started with a dc direct star sapphire figure and dremeled off some pieces then used citadel green stuff to sculpt her entire outfit and resculpt her booty. I then used a wwe aj lee head and sculpted the mask and some hair pieces. I then base coated her with chaos black spray then detail painted her. the hardest part being the fish netting on her boots. I finally made a from scratch sai weapon out of some nails and a screw that i welded together and ground down in to shape. I hope you enjoy her and thank you for looking!!!!!](userimages/customs/50000/49516-1.jpg) Mileena Mortal Kombatby pyramidhead22I updated photos of this custom hope you enjoy...
I've been in a mortal kombat mood lately and my favorite character in it is Mileena. i've also see...6 comments | ![[Spartan 104 Frederick] continuing my line of spartan II figures based on characters out of the book the fall of reach and other halo universe items. I created spartan 104 Frederick. He started as a halo 4 master chief base body with multiple armor pieces from the halo package fred figure. i then added accessories to him and repainted him and added small details including his spartan number. I then created a custom battle rifle for him also. enjoy and thank you for looking.](userimages/customs/49500/49081-1.jpg) Spartan 104 Frederick Haloby pyramidhead22continuing my line of spartan II figures based on characters out of the book the fall of reach and other halo universe items. I created spartan 104 F...1 comments |
![[Spartan 059 Linda] continuing my collection of Spartan II's my next figure is the character from the book fall of reach spartan 059 Linda. She is the sniper of the unit so i decided to base her armor off of juns from halo reach the game. her helmet is a halo 3 master chief with pieces of juns helmet added on. I then used the body from kat from halo reach and added upper arms from a halo odst with the lower arms of a a spartan. I then used other accessories off of jun and created my own more mobile sniper rifle for her. I then painted her and added the small details including her spartan number.](userimages/customs/49500/49080-1.jpg) Spartan 059 Linda Haloby pyramidhead22continuing my collection of Spartan II's my next figure is the character from the book fall of reach spartan 059 Linda. She is the sniper of the unit...1 comments | ![[Spartan 087 Kelly] I wanted to create all of the major spartan II 's after reading the amazing book and graphic novel the fall of reach. if you are a halo fan and have never read them i recommend them. so to start this collection of characters i wanted to create my favorite spartan 087 Kelly. for her I basically did a full repaint of the released figure by mcfarlane and started by using spray chaos black. I then dry brushed her green armor and added the small details including her spartan number and the painted rabbit on her armor. I then made a custom SMG for her. hope you enjoy her and the rest of them.](userimages/customs/49500/49079-1.jpg) Spartan 087 Kelly Haloby pyramidhead22I wanted to create all of the major spartan II 's after reading the amazing book and graphic novel the fall of reach. if you are a halo fan and have...3 comments |
![[General RAAM] I was never really satisfied with the released gears raam figure he was to small and paint was just ok. I decided to not only make him taller but decided to do a full repaint on him. I extended his legs using pieces of a tharon guard. I then added to his torso and added larger shoulder armor. I then base coat sprayed him with chaos black then dry brush the painted detail. I added accessories and also made a scratch build knife since the one he came with was pretty tiny. Hope you like him.](userimages/customs/48500/48220-1.jpg) General RAAM Gears Of Warby pyramidhead22I was never really satisfied with the released gears raam figure he was to small and paint was just ok. I decided to not only make him taller but dec...3 comments | ![[Watcher] i felt that the halo 4 watcher figure was about as low a mcfarlane could go. they should have just included him with the awesome knight figure but instead decided on making him his own. but anyway didn't like how the watcher only came with one flight ring and i liked how in game they flew around annoyingly with 2 flight rings so i took the ring he came with and cast it in plastic resin. I then repainted it and attached both rings to the back of the watcher figure. I also took the clear base and modded it so it can attach to the back of the knight to look as if it is flying above him. thank you for looking and enjoy.](userimages/customs/47500/47234-1.jpg) Watcher Haloby pyramidhead22i felt that the halo 4 watcher figure was about as low a mcfarlane could go. they should have just included him with the awesome knight figure but in...2 comments |
![[Jul Mdama (the Didacts Hand)] one of the coolest things about halo 4 is the weekly episodes of spartan ops. I dont care about the repetitive missions ( boring) but the amazing videos that start each episode. So for this custom i made the arch villain Jul Mdama the didacts hand.
I started with a halo 4 elite zealot and repainted him starting with chaos black spray. I then dry brush the colors on his armor. After wards i added the details of the hand prints then used the energy sword to make the holographic marker above his helmet. Hope you like and thank you for looking.](userimages/customs/47500/47230-1.jpg) Jul Mdama (the Didacts Hand) Haloby pyramidhead22one of the coolest things about halo 4 is the weekly episodes of spartan ops. I dont care about the repetitive missions ( boring) but the amazing vide...4 comments | ![[Garrus ( Alternate Appearance )] I was recently given the opportunity to work on a commission project for a friend here on the realm, SansPedes. He asked me to customize his set of mass effect figures and after finding out the details of what he wanted i began working on the figures. I began with garrus. I started by sculpting over the battle damage on his armor using Citadel green stuff. I then primer coated him in chaos black spray after drying I dry brush the figure to the details on the armor for garrus's alternate appearance in Mass Effect 2. I then repainted the visor, eyes, and added the head set to him. I finally sealed the figure using citadel purity seal then i made the figure so he can store the folded weapons on his back.
I had some set backs due to a work injury but now that im back on track i'll be working on the rest of the figures in the series soon.!!!!!! I hope you all enjoy!!!!! thank you for looking.](userimages/customs/47500/47092-1.jpg) Garrus ( Alternate Appearance ) Mass Effectby pyramidhead22I was recently given the opportunity to work on a commission project for a friend here on the realm, SansPedes. He asked me to customize his set of ...2 comments |
![[Jake Morris ( Original Character)] back in 2005 i worked on An original story of silent hill which i comiced in a note book during every class in high school. It passed the time since i wasnt really much for school. I created this character and all the creatures and other characters needed for this story. funny thing is i just found the note book the other day and began re reading it and really want to redo it and in the process decided i wanted to make a series of figures from my original silent hill story. so this figure is based on the lead character Jake Morris.
I created him using a twilight eclipse edward figure. I repainted his pants to make blue jeans then resculpted his hair and added a goatee using citadel green stuff which is pretty sweet if youhave never used it. I then repainted his eyes to not make em a vampire. then I added different hands from another random figure and repainted. I then sculpted a flash light for his jacket then a cell phone which acted as the radio like in the game. i then added](userimages/customs/47000/46508-1.jpg) Jake Morris ( Original Character) Silent Hillby pyramidhead22back in 2005 i worked on An original story of silent hill which i comiced in a note book during every class in high school. It passed the time since i...3 comments | ![[The Weeping Bat] this custom is of a creature that appears in the game Silent Hill Downpour. freakin scary creatures that tower over you and usually drop down from ceilings right in front or behind you. I created this custom using a neca alien warrior figure and i sculpted the entire head and back piece and sculpted over the ribs even though they are very skeletal looking. I then painted the entire figure starting with a base coat of chaos black then dry brushing over for final details. hope you like and thank you for looking.](userimages/customs/47000/46505-1.jpg) The Weeping Bat Silent Hillby pyramidhead22this custom is of a creature that appears in the game Silent Hill Downpour. freakin scary creatures that tower over you and usually drop down from ce...4 comments |
![[Silent Hill Street Diorama] I wanted to create a diorama for my upcoming silent hill character figure line im redoing. I wanted to make a street corner and store front so i decided to make a surplus store and a cut off street piece. to make ths it was all from scratch with some added accessories. so lets begin....
THE STREET
the cut off street was created from sheet plastic and and i added detail using a dremel. I then sculpted on the side walks and the base of the steet. the brick wall was from an old tomb raider base along with the street light and tash cans. I then painted it starting with a base coat of chaos black. then dry brushed all the detail
THE STORE FRONT
this was created all from scratch starting with sheet plastic i cut the shape of the store front which measures 10 inches tall. I then used a dremel to cut the brick dtails. I then cut all the pieces needed to make the door frame and also the windo display. I glued it all together and added the door which is acrylic plastic. I added a si](userimages/customs/47000/46502-1.jpg) Silent Hill Street Diorama Silent Hillby pyramidhead22I wanted to create a diorama for my upcoming silent hill character figure line im redoing. I wanted to make a street corner and store front so i deci...3 comments | ![[Pyramidhead] This has been a vision of mine for a long time to do a complete from scratch pyramidhead figure, statue. Even though the movie isn't the best I've always been a fan of the design of the pyramidhead in that movie. there is an image of the character which is actually my profile picture that i wanted to duplicate in figure form. so where to begin with this project.... the head
This started as sheet steel that i cut into shape and welded. I dremeled and carved the dents into the helmet then added pieces to make the details on the helmet. I then flat black painted then dry brush the helmet for the final product.
onto the body, I started with a foil skeleton of the upper torso then sculpted with super sculpy over. I added in the details and backed. since you can back this stuff numerous times i then sculpted the arms and hands starting with a foil skeleton. I the sculpted the apron using sheeted super sculpy and draped and sculpted it to the final product. after it was done i paint](userimages/customs/46500/46161-1.jpg) Pyramidhead Silent Hillby pyramidhead22This has been a vision of mine for a long time to do a complete from scratch pyramidhead figure, statue. Even though the movie isn't the best I've al...8 comments |
![[Pyramidhead Bust] I've been trying to experiment with different mediums as of late. and have wanted to create a bust of one of my favorite characters of all time the pyramidhead from silent hill movie version.
He was created completely from scratch. I started by doing some government work at my job by creating the helmet for the bust. It is made completely out of steel that was cut, bent, dremeled, and welded together.
The body started as a foil skeleton that i shaped then sculpted over, adding in the details to accommodate the helmet that actually is not that heavy. I then custom sculpted the base and great knife to stick into the base.
I finally custom painted the entire sculpture starting with a base coat of citadel chao black spray then dry bushing the entire thing.
I hope you enjoy](userimages/customs/46500/46011-1.jpg) Pyramidhead Bust Silent Hillby pyramidhead22I've been trying to experiment with different mediums as of late. and have wanted to create a bust of one of my favorite characters of all time the p...2 comments | ![[The Dragon Born ( in Thieves Guild Armor)] this is a custom figure of my character in the game skyrim. I loved the master thieves guild armor so i decided to make this figure in that armor. and since I usually duel wield swords in the game my character knows the way of the blade.
I used a mcfarlane headless horseman as a base for this figure. I used the head from a modern starman figure and added hair and repainted the face. I then added a hood and various other accessories and armor to him including pouches , sheaths for his swords and shoulder armor. I also made custom swords, a shield and A deadric bow for him. I finally sculpted a dragon priest mask which can be put on the figures face and removed. I did an entire repaint of the figure and he was then complete ready for his adventures in skyrim I hope you like this figure.](userimages/customs/46000/45598-1.jpg) The Dragon Born ( in Thieves Guild Armor) Fantasyby pyramidhead22this is a custom figure of my character in the game skyrim. I loved the master thieves guild armor so i decided to make this figure in that armor. a...4 comments |
![[Tali Zorah ( Mass Effect 3 Style)] Im a huge tali fan i have a tat of her on my forearm so i am for life now. but she is such a great character and ive made version of her in the past but wanted to do a mass effect 3 style one. I liked the alternate helmet she could wear which had armor on it. so i repainted the entire figure and added to the hood to make it bigger. I then sculpted onto the helmet to make it look like the one from in game. I also added ankle articulation so her legs weren't so chickeny. she has multiple points to peg weapons to her like my shepard figure. I tied to make this costume kind of my own adding elements from various ones she wears to make this so i hope you enjoy and thank you for looking.](userimages/customs/46000/45596-1.jpg) Tali Zorah ( Mass Effect 3 Style) Mass Effectby pyramidhead22Im a huge tali fan i have a tat of her on my forearm so i am for life now. but she is such a great character and ive made version of her in the past ...7 comments | ![[Miranda Lawson] when the second series of mass effect figures released i was excited for the character choices that were in it but one figure out of the bunch was pretty awful and that was miranda. Her catsuit is white and they made her look pretty dirty and then her face WOOOF beady eyes and no lips made her creepy if shes supposed to be a genetically made perfect human then this to company must not have had that info. cause she doesnt have the looks. so I wanted to make this figure better. I decided to paint the suit to black since she can wear an alternate black catsuit and painted all the fine details. I then wanted to re do the face so i repainted the eyes and lips and added make up to her. I then added more hair since way to much face was showing making her head look alien like. So i hope you like her and thank you for looking.](userimages/customs/46000/45595-1.jpg) Miranda Lawson Mass Effectby pyramidhead22when the second series of mass effect figures released i was excited for the character choices that were in it but one figure out of the bunch was pre...1 comments |
![[Commander Shepard] I think the best series to be released in the sci fi genre in the past years has been Mass Effect. the story the characters and places you go to and meet are amazing and unforgettable that why when the figures were released i was pretty upset because they were pretty forgettable. but i tried to take them up the badass toy scale a bunch of notches. This commander shepard consists of added ammo pouches so it would look like my shepard in mass effect 2. I then repainted the eyes on the figure because they were black eyes which were creepy and painted them blue like in the game well for default shepard. I then took the helmet that came with him and made it the closed breather mask and added tubes and a pack which can hook into shepards back. I always liked the helmets from mask effect one but they did away with that cool design in the other games as far as the hoses on the helmet. Since i play as a soldier in the games and get access to all the weapons in the game I wanted to make](userimages/customs/46000/45594-1.jpg) Commander Shepard Mass Effectby pyramidhead22I think the best series to be released in the sci fi genre in the past years has been Mass Effect. the story the characters and places you go to and ...1 comments | ![[Emile ( Halo 4 Style)] I always loved the design of emile from halo reach but felt with halo 4 being out that he needed an armor update. also since there is a glitch in reach where you can save his life this is a what if armor to. I used a mcfarlane halo 4 spartan soldier figure and cut the ammo pouches and unneeded armor from him. I then flat black painted him then dry brushed his armor to match the reach armor. I then added accessories from the reach emile and some other items since he is the weapons specialist and there you have him hope you like.](userimages/customs/45000/44894-1.jpg) Emile ( Halo 4 Style) Haloby pyramidhead22I always loved the design of emile from halo reach but felt with halo 4 being out that he needed an armor update. also since there is a glitch in rea...7 comments |
![[Cortana Light up Terminal ( Version 2)] I recently started working on A light up mini cortana figure and terminal but was not happy with the over all project so I went back and added to it. I made a larger base for the chief to stand as kind of a diorama piece. the entire project was made out of various different fodder pieces i had lying around but the reciepe is as follows.
1. Action clix cortana
2. mcfarlane cortana light base pieces
3. various pieces from a gears of war one shot rifle.
4. drill bit case
5. drill bit lid
6. cardboard
7. super sculpy
8. small air tubing
9. mcfarlane halo avator case
the entire base is cardboard with the trim made out of super sculpy. I dry bushed it and used a grated box i had to spray through to give the base a grated metal look. I then constructed the railing out of small air hose i got from my job, close hangers and tumb tacks. I assembled it and painted adding it to the base. for cortanas terminal, I used a drill bit case which i ran the wires and lights through and the battery](userimages/customs/45000/44867-1.jpg) Cortana Light up Terminal ( Version 2) Haloby pyramidhead22I recently started working on A light up mini cortana figure and terminal but was not happy with the over all project so I went back and added to it. ...3 comments | ![[Cortana] I recently saw an amazing custom accessory made by a fellow realmer for the halo 4 master chief figure. I wanted to make one similar but decided to make a light up base for the mini action clix cortana figure. I started with a drill bit empty case and disassembled a mcfarlane cortana base to take the battery pack switch and led lights from it. I ran the wires throught the case and used a mcfarlane halo avatar case base for the base of the cortana terminal. for the top of the terminal i used a scrap clear plastic dome piece we made at the plastic factory i work at. I then put random fodder pieces together and taped off where cortana would stand so when i used chaos black paint spray to base coat it the clear plastic would still be there to shine the blue light through. I then painted the entire base. I finally added cortana and there you have it a custom terminal in scale with the master chief. hope you like her and props to Anthony's customs for the awwwwww inspiring idea](userimages/customs/45000/44786-1.jpg) Cortana Haloby pyramidhead22I recently saw an amazing custom accessory made by a fellow realmer for the halo 4 master chief figure. I wanted to make one similar but decided to m...3 comments |
![[Halo 4 Cortana ( with Light up Base)] I love the new cortana figure that mcfarlane released but there were of course things that bugged me. for one the base was very lackluster. and since the figure is translucent like the halo 3 style only with some paints over to defy her face. I wanted to add lights into the base like the other cortana. I dremeled out the 3 places around the top of her base and used the leds and other pieces from the other cortana base and combined them together. on the back of the base i put the switch into the base so u can turn the light on and off. then for cortana i did a repaint on her face redoing her eyes and lips and adding pieces to her hair to make it more accurate to the game. I hope you like her](userimages/customs/44500/44450-1.jpg) Halo 4 Cortana ( with Light up Base) Haloby pyramidhead22I love the new cortana figure that mcfarlane released but there were of course things that bugged me. for one the base was very lackluster. and sinc...4 comments | ![[Spartan 104 Frederic] I wanted to expand my halo collection with A character that is a personal favorite Spartan 104 Frederic. He appeared in the halo legend movie in the package and in some of the books and he officially made his live action debut in the forward until dawn movie. so for this figure I did a mix of the forward until dawn version mixed with a halo 4 spartan armor. I used a halo 4 master chief base and repainted the entire figure to A gun metal grey color. I added different armor pieces from various spartan figures and the helmet from A noble 6 figure. I then made a version of the new battle rifle appearing in halo 4. It was made from various different gun pieces. I hope you like and thank you for looking.](userimages/customs/44500/44039-1.jpg) Spartan 104 Frederic Haloby pyramidhead22I wanted to expand my halo collection with A character that is a personal favorite Spartan 104 Frederic. He appeared in the halo legend movie in the...4 comments |
![[The Arbiter ( Halo 4 Style)] I love the halo series and felt the need to make A arbiter figure to accompany my chief figure for halo 4 so I used a Elite zealot figure from halo 4 and added armor pieces from various covenant figures. I then repainted the entire figure and did eye work to him. for the chief figure I made the new battle rifle since it hasn't been released yet. Hope you like and thank you for looking.](userimages/customs/44000/43668-1.jpg) The Arbiter ( Halo 4 Style) Haloby pyramidhead22I love the halo series and felt the need to make A arbiter figure to accompany my chief figure for halo 4 so I used a Elite zealot figure from halo 4 ...2 comments | ![[Harley Quinn] love the character harley quinn. so I wanted to make a custom look for her. I love the original look but also like the maskless version like in arkham city so i wanted to combine it. I used a harley quinn hush figure base and used the boots from a arkham asylum figure cut off the heels and painted them. I then added the head from a mattel harley figue and repainted the face. I used the gloved hands from a arkham city catwoman and sculpted the cuffs on the gloves.](userimages/customs/43500/43183-1.jpg) Harley Quinn Batmanby pyramidhead22love the character harley quinn. so I wanted to make a custom look for her. I love the original look but also like the maskless version like in arkh...7 comments |
![[Guild Master Thief (Skyrim)] Skyrim is an amazing game with endless opportunities in it just say good bye to life when playing. but my favorite armors of the game are the thieves guild light armors they just look the coolest. so i decided to make my male pc character in figure form. I used a mcfarlane headless horsemen body for a base and used a modern starman head for the head. I used multiple pieces to make the hood and various different accessories from different figures to make the armor and weaponry. I made a custom sword and dagger. I also made a daedric bow. I then painted the figure and finished my first skyrim custom thank you for looking.
Recipe
1. Dc modern starman head
2. Mcfarlane headless horseman body
3. NECA dante inferno hands
4. various lord of the rings armors and weapons
5. NECA vector hood
6. daedric bow made for wow night elf figure
all weapons can be stored on figure](userimages/customs/43000/42833-1.jpg) Guild Master Thief (Skyrim) Fantasyby pyramidhead22Skyrim is an amazing game with endless opportunities in it just say good bye to life when playing. but my favorite armors of the game are the thieves...8 comments | ![[Jason Voorhees] I've always been a fan of the friday the 13th movies as cheesy as they are they are all classics and i'm sad they havent come out with any more even though the 2009 remake was still really good its been 3 years. my favorite design for jason was in the 3rd where he first gets the hockey mask and he was always the most menacing feeling. but ive always also loved zombie jason. it just drove me nuts that they always changed his clothing through out films. if they are all continuations he wouldnt care about his clthing only killing everything. so being a fan of his 3rd movie design green shirt and blue pants i wanted to zombify that design so i used the mcfarlane jason and did a full repaint. I then removed the feet from the figure and used those from a NECA friday remake jason and added the gloved hands from a friday part 7 jason. even though jason goes to hell was pretty awful i liked the design of him with the damaged mask having his skin grown over it. so i used a mezco jason g](userimages/customs/43000/42751-1.jpg) Jason Voorhees Friday the 13thby pyramidhead22I've always been a fan of the friday the 13th movies as cheesy as they are they are all classics and i'm sad they havent come out with any more even t...4 comments |
|