![[Avengers Black Widow V.2] This figure started with a Marvel Legends Wasp figure. The head is from a bootleg Black Widow figure. Lots of add ons. I made the seem lines on this figure with fishing line and he zipper is made from a head phone wire. Lots of straps and the holsters were made from some leather I had laying around. Hope you enjoy.](userimages/customs/50000/49849-1.jpg) Avengers Black Widow V.2 | ![[Rogue] This was a commission piece that I did for a customer who wanted a better Rogue. She started out as a Spider Woman figure with ML Wasp head and hands. The hair is from a Hope Summers figure with additional sculpting. The jacket and boots were made with either sculpting or fodder parts. Hope you enjoy.](userimages/customs/50000/49848-1.jpg) Rogue |
![[Scarlet Spider V.3] My Customer wanted a Scarlet Spider like I had done in the past. So this is my 3rd version of him. I changed up a couple of things that I had done before but is pretty much my same recipe. This time I think I really got the eyes right. Enjoy.](userimages/customs/50000/49822-1.jpg) Scarlet Spider V.3 | ![[Battle Damaged Wolverine] Customer asked me to make a roughed up Wolverine. Started with the ML Wolverine and gave him a ripped shirt and shot some arrows at him. Also if I am doing a Wolverine, that means metal claws. Hope you enjoy.](userimages/customs/50000/49821-1.jpg) Battle Damaged Wolverine |
![[Red Ranger] This was a custom that I always wanted to do. I took a DCUC Flash and mixed him with the Megaforce Armor Red Ranger. Thanks for looking.](userimages/customs/50000/49742-1.jpg) Red Ranger | ![[X-Force Deadpool] Just took the X-Force Deadpool and changed weapons and created a new chest holster and scabbards for the swords.](userimages/customs/50000/49568-1.jpg) X-Force Deadpool |
![[Sinister Six Armor Spider-Man V.2] This is my second version of this figure. This was made for an up and coming 12 year old customizer in England. Started with Extremis Ironman and added a lot of sculpt and custom paint. Hope you enjoy.](userimages/customs/50000/49567-1.jpg) Sinister Six Armor Spider-Man V.2 | ![[Venom] I am a Marvel Legends Collector but could not turn down the new Marvel Select Venom figure. I never have liked any of the ML scale ones that have came out so I made this guy. He is a mix of the Spider-man Classics venom and the Marvel Select version. Legs, arms came from the SMC and hands, torso and head are all from the MS. Hope you enjoy. Also added bendy tendrils that are magnetically attached.](userimages/customs/49500/49439-1.jpg) Venom |
![[Flash Thompson Venom] Hey all, HDC back here with another custom project. This time I wanted to tackle Agent Venom.
Heads: Unmasked(Ronan), Masked(Fantomex and sculpy, Venom(Marvel Selects Venom extra head)
Body: Fantomex
Hands: Avengers Nick Fury, Marvel Selects Venom extra hands
Boots: Nick Fury
Lots of sculp and custom paint.
Gun belt from Fantomex and random guns. Also added some tendrils that are attached with magnets to his back.](userimages/customs/49500/49438-1.jpg) Flash Thompson Venom | ![[Carnage V.2] Hey guys. One of my customers liked my first version of carnage and asked me to do another. I used the carnage that has teeth this time. Did the same thing with the wires and rubber dip. Testicles are magnetic and can be placed anywhere. I added more of them this time. Hope you enjoy.](userimages/customs/49000/48806-1.jpg) Carnage V.2 |
![[White Tiger] My customer wanted a White Tiger fig from the Ultimate Spider-man show. Started with a Psylocke figure and ripper her hear out. I dipped her head in rubber dip to make the mask and then sculpted the pony tail. The belt and Totum were also added with sculpy. Hope you enjoy.](userimages/customs/49000/48805-1.jpg) White Tiger | ![[X-23] I had a customer that came to me and asked me to create a better X-23. The Marvel Legends on was horrible. I started with a Hope Summers figure and swapped out arms and legs. I did use the lower legs and lower arms from the x-23 fig. I gave her metal claws on her hands and feet and the no claw hands can be swapped in with magnets. The metal claws on the feet still fold in. Her head came from a DCUC Donna Troy. Added a belt and some paint and there you have it.
Check out more pics of her on my Facebook page Happy Day Customs.](userimages/customs/49000/48608-1.jpg) X-23 |
![[Spider-Man Ben Reilly] Hey all. I had a spare Mr. Fantastic laying around and wanted to make one of my favs. I took off his arms and added the arms from the ML version of this figure. The head came form a random Spider-man that I had laying around. McFar...just kidding I would never do that. He is super possible and a lot better than the one that Hasbro released. Hope you enjoy. Check out more pics of him on my facebook page, Happy Day Customs.](userimages/customs/49000/48607-1.jpg) Spider-Man Ben Reilly | ![[Black Widow] Hey guys. This was a commission for one of my customers. The customer really wanted an Avengers version of this charactor so I took inspiration from the one that Raybot did not too long ago. He is an ARTIST. Love his stuff. The figure was made from the ML Invisble Woman base with tons of added charm. I used fishing line glued on to the figure to make the lines on her suit. The neck piece is from a random piece of rubber I had and the zipper is a headphone wire I had around. Lots of sculpting for the hair and some on the boots. The straps are all hair ties or fake leather that came from a movie Blade coat. Same with the holsters. Hope you enjoy. Check out more pictures of her on my facebook page under Happy Day Customs.](userimages/customs/48500/48357-1.jpg) Black Widow |
![[Scarlet Spider V.2] Hey guys. This is my second crack at Spider here. I love this charactor and love the headsculpt and the work I have seen from tons of customizers on here who have used this same recipe. I did add a lot of sculpting as well as added new hands as the original were horrible. Hope you enjoy.](userimages/customs/48500/48356-1.jpg) Scarlet Spider V.2 | ![[Superman JLA Vs Avengers] My customer wanted me to create a dio on a battle from the JLA/Avenger comic line. I started with the Sup you see and messed him up. Tore up his cape and used sculpy to create the ripped cloths look. Gave him a total repaint using GamesWorkshop paint and there you have it. This was my first time doing a diorama, well since I was 6 when I made one for an english class. It is made up of lots of styrophome, hot glue and paint. I did not have Thor's hammer so made that from scratch out of sculpy and wrapped electric tape around the handle and made the strap come up over his wrist. Added a cap sheild, Ironman helmet and a beated Hulk. Hope you enjoy.](userimages/customs/48000/47807-1.jpg) Superman JLA Vs Avengers DC Directby HappyDayCustomsMy customer wanted me to create a dio on a battle from the JLA/Avenger comic line. I started with the Sup you see and messed him up. Tore up his cap...4 comments |
![[Green Arrow] This is another one that I did a while ago and never entered up here. Loved the fig but the head articulation and bow was horrific. I swapped the entire neck out with the neck from another DCUC buck. Then took to the bow. The bow string was made from some elastic string and the arrows were a mix between his, Legolas', and Hawkeye's. The tips where swappable so you could have him holding different arrows. Also gave him a small crossbow for those times when the bow was too much.](userimages/customs/47500/47493-1.jpg) Green Arrow D.C. Universeby HappyDayCustomsThis is another one that I did a while ago and never entered up here. Loved the fig but the head articulation and bow was horrific. I swapped the ent...5 comments | ![[Carnage] This one was fun. I am a big Carnage fan but never liked the ones that they came out with. This is a complete custom. I started with The body of a Black Suit Spider-Man from the Red Hulk wave. I really liked the added shoulder articulation. The main body was then drizzled with hot glue to give it that slimy look. I then added the limbs and head from the Marvel Legends Carnage. The tendrils are made from twisted wires that were dipped in rubber dip and had magnets attached so that they can go on and off and be placed in different positions. The right hand is swappable with a custom built ax that was also drizzled with hot glue and then dipped in rubber to give it that Carnage look. The entire figure was then custom painted.](userimages/customs/47500/47327-1.jpg) Carnage |
![[Superman 659 Cover] Always loved the idea of this but never saw it put together. I started with a DCUC Superman and added some Hawkman wings. Pretty simple but I like it.](userimages/customs/47500/47135-1.jpg) Superman 659 Cover D.C. Universeby HappyDayCustomsAlways loved the idea of this but never saw it put together. I started with a DCUC Superman and added some Hawkman wings. Pretty simple but I like i...2 comments | ![[Death of Superman] This is my second try at this figure. I really loved it the first time and wanted to take another crack at it. Started with a DCUC Hawkman and added some hair to an Amazo head. Sculpted the shirt and painted the rest. Hope you like him.](userimages/customs/47500/47134-1.jpg) Death of Superman D.C. Universeby HappyDayCustomsThis is my second try at this figure. I really loved it the first time and wanted to take another crack at it. Started with a DCUC Hawkman and added...6 comments |
![[Bane] This is a custom that I did a could of years ago and did not put up on here. He is long gone and in another's collection. I made him from a Spider-Man Classics Juggernaut. I shaved down some of the ridges and dipped his head in rubber coating to creat the mask. Some fodder parts and some paint later...BANE! I hope to make another one of these soon and improve upon the design and paint apps.](userimages/customs/47000/46964-1.jpg) Bane D.C. Universeby HappyDayCustomsThis is a custom that I did a could of years ago and did not put up on here. He is long gone and in another's collection. I made him from a Spider-M...7 comments | ![[Scarlet Spider] I always loved this charactor but did not get the SMC version of him so decided to make my own.
Body: Urban Legends DareDevil
Head: Red Hulk Black Spider-man ML
Pouches: ML8 Ultimate Captain America Belt
Rest: Lots of Super Sculpy
I also used the Shoulder mod tutuorials here on FigureRealm to get rid of those massive shoulders.
Check out additional pics of him on my Facebook page: Happy Day Customs](userimages/customs/47000/46963-1.jpg) Scarlet Spider |
![[Sinister Six Armor Spider-Man] Here is my Ends of the Earth Spiderman. I loved this design and had to tackle it. I thought Extremis would be a perfect fit.
Body: Extremis IM
Head: ML Dr.Doom and sculpy
Shoulder pads: Ironman 2 Hulkbuster IM
Pouches: ML Ultimate Cap
Sculped the wrist a little and took off the toes on the figure. Hope you enjoy. Check out additional pics on my FB page. Happy Day Customs](userimages/customs/47000/46666-1.jpg) Sinister Six Armor Spider-Man | ![[Iron Spider-Man] This is my favorite armor that Pete has put on, but the figure they put out was horrible. I took and shaved down the head and eyes and re-sculpet them. The hands where another issue. I replaced his arms with that of Black Lantern Abin Sur. Added some sculpy to the chest to help fill out the symbol and repainted him.
Check me out on Facebook at Happy Day Customs to check out any of my current projects.
Hope you enjoy.](userimages/customs/47000/46574-1.jpg) Iron Spider-Man |
![[Death of Superman] I have been working on several Superman figures over the last year. This was one that I always wanted to do but could not find the right inspiration to do it. Until I saw the amazing work of ringomendoza. His figure that he displayed was outstanding. I started with a DCUC Mullet Superman and shaved his hair down. Then added a lot of sculpy and paint. Hope you like it. Sold him on eBay already but I can make more if you want one.
Look me up on Facebook under Happy Day Customs](userimages/customs/47000/46572-1.jpg) Death of Superman D.C. Universeby HappyDayCustomsI have been working on several Superman figures over the last year. This was one that I always wanted to do but could not find the right inspiration ...3 comments | ![[Cyborg Superman] Hey all. Here is my DCUC Cyborg. Could not find one of these online so made my own. The head is cast from Camko Kid. Love that guys stuff. The body is an old DCSH Superman that I made into a GL and now back to Cyborg. The cyborg parts are all custom sculpted and the cape is t-shirt with a wire in the bottom for weight and posing. The head is also magnetically on there. The upper legs and hips were replaced with a DCUC buck because the DCSH figs had weird legs and hips. Hope you enjoy.](userimages/customs/46500/46467-1.jpg) Cyborg Superman |
![[Scarlet Spider] Love this figure but needed to make some changes to it. I gave him a new head from a figure I picked up at a thrift shop (score). Also gave him a new paint job because the plain blue was not working for me. Hope you like him.
Check me out on Facebook under Happy Day Customs. Not putting him on eBay yet, buck check my Facebook page for WIPs and to see any auctions I have up.](userimages/customs/46500/46332-1.jpg) Scarlet Spider | ![[Nightwing] Always loved Nightwing but there were a couple of things about the figure that I did not like. I hated his hair, so I gave him a cut. I removed some of the hair from the back to give him a tighter look. I also really like closed fists for posing, so I gave him some additional hands that can be swapped using magnets. Hope you all enjoy him.
Look me up on Facebook under Happy Day Customs](userimages/customs/46500/46331-1.jpg) Nightwing D.C. Universeby HappyDayCustomsAlways loved Nightwing but there were a couple of things about the figure that I did not like. I hated his hair, so I gave him a cut. I removed some...4 comments |
![[Lex Luthor and Armor] Got my hands on the OL Lex and used him to make his original armor. Game him a magnetic head so that it could be swapped between the 2 figures. There is custom paint as well as sculpting that went into this figure. Hope you enjoy.](userimages/customs/46500/46032-1.jpg) Lex Luthor and Armor D.C. Universeby HappyDayCustomsGot my hands on the OL Lex and used him to make his original armor. Game him a magnetic head so that it could be swapped between the 2 figures. Ther...4 comments | ![[Guy Gardner Green Lantern] Always wanted to make my own GL Guy Gardner. Took a standard GL body and added some cuffs to his arms. The head came from ML Banshee anter I shaved of some of his hair and gave it a dye job. The jacket is from a Cyclops figure from the first x-men movie. Hope you enjoy.](userimages/customs/46500/46031-1.jpg) Guy Gardner Green Lantern D.C. Universeby HappyDayCustomsAlways wanted to make my own GL Guy Gardner. Took a standard GL body and added some cuffs to his arms. The head came from ML Banshee anter I shaved ...3 comments |
|