![[Feral Wolverine] HEAD/UPPER LEGS-AoA Weapon X
ARMS-Some wrestler
LOWER LEGS/FEET-Wolverine
TORSO-Ultimate Wolverine
This is another entree in my alternate versions of Wolverine lineup. THis is from during the Onslaught saga when he had his Adamantium ripped from him and his mutation caused him to regress. I'm not too sure about the arms, I think tey might be too bug (let me know). THe claws are toothpicks that I filed down in random places to give them the bone look. the mask and shirt is dip grip, this stuff is fiun to work with, but the fumes...phew (I gess someone might consider that fun too).](userimages/customs/7000/6933-1.jpg) Feral Wolverine Marvel Legendsby nigmaHEAD/UPPER LEGS-AoA Weapon X
ARMS-Some wrestler
LOWER LEGS/FEET-Wolverine
TORSO-Ultimate Wolverine
This is another entree in my alternate versions of...2 comments | ![[X-Force + Warpath] HEAD=Wolverine
TORSO/LEGS/ARMS=Omega Red
WAIST=Bishop
Tried the same hip/shoulder replacement here as I did my wolverine. Otherwise not much more for me to say, let's hear from you.](userimages/customs/7000/6932-1.jpg) X-Force + Warpath Marvel Legendsby nigmaHEAD=Wolverine
TORSO/LEGS/ARMS=Omega Red
WAIST=Bishop
Tried the same hip/shoulder replacement here as I did my wolverine. Otherwise not much more fo...0 comments |
![[X-Force Wolverine] HEAD/ARMS/TORSO-Wolverine
LEGS-Cable
Yet another oldie just bening posted. I wanted to try something different with this one, something to get ttrid of the probl;em of joint rub arounf the shoulders and hips. So what I did was take off the shoulders and hips, and replaced them with ball bearings. Then I put a small magnet in the hips and body et voila. I'm still working out some of the kinks with this idea, but so far there are only a few small problems. if anyone has some suggestions, I'd love to hear them.](userimages/customs/7000/6931-1.jpg) X-Force Wolverine "V"by nigmaHEAD/ARMS/TORSO-Wolverine
LEGS-Cable
Yet another oldie just bening posted. I wanted to try something different with this one, something to get ttrid...2 comments | ![[X-Force X-23] HEAD/TORSO-Huntress
ARMS-X-23
WAIST/LEGS-Kitty Pryde
This is another one I did awhile ago and am only posting now. I wanted to try something a little different for this version of one of my favorites characters, and I had a Huntress figure lying around that I couldn't figure out what to do with, so I tried this. X-23's arms fit right into the sockets really nicely. the only problem was with the torso fitting into the waist. I had to trim it and looking at it now, I should have smoothed it a little more](userimages/customs/7000/6930-1.jpg) X-Force X-23 Marvel Legendsby nigmaHEAD/TORSO-Huntress
ARMS-X-23
WAIST/LEGS-Kitty Pryde
This is another one I did awhile ago and am only posting now. I wanted to try something a lit...1 comments |
![[X-23] HEAD/BODY/ARMS/UPPER LEGS-Marvel Legends Ms.Marvel
HAIR-Sculpted
LOWER LEGS-Marvel Legends X-23
I did this one a while aog and was planning on doing the entire lineup of New X-men, but it kept changing, and now I'm not entirely sure who's on the team. SO, I decided to include it with my upcoming Wolvering lineup, since I think technically she is his twin sister (I'm not sure what you would refer to your clone as, hasn't come up yet). I modelled the hair since I didn't have any from X-23, and I didn't think Ms.Marvels worked.](userimages/customs/7000/6929-1.jpg) X-23 Marvel Legendsby nigmaHEAD/BODY/ARMS/UPPER LEGS-Marvel Legends Ms.Marvel
HAIR-Sculpted
LOWER LEGS-Marvel Legends X-23
I did this one a while aog and was planning on doing ...1 comments | ![[Deadpool Girl] This is my second attempt at a lesser known Deadpool variation. For those of you who do not know where this version appeared, it was in an issue of Cable/Deadpool, number 9 or 10 I think. It was only one one page, but that was enough to make an impact. The hardest part of this figure was making the body parts disfigured. I startred by putting a little bit of Fixit and then massing is up to look like scars, then ended up just taking my dremel with a round headed bit and going nuts making holes all over the body. I used a new kin=d of paint that I didn't really like, but lesson learned. I also took the legs off of A Havok figure cause Weapon X was a little short.
Head/Torso/arms-AoA Weapon X
Legs-Havok
Mask-Electro
Skirt-Dr.Doom](userimages/customs/5500/5423-1.jpg) Deadpool Girl Marvel Legendsby nigmaThis is my second attempt at a lesser known Deadpool variation. For those of you who do not know where this version appeared, it was in an issue of C...4 comments |
![[Nocturne] Part of my plan to make the Exiles/AoA figure assortment (the two lines are tied together by a couple characters). Unfortunately this will be my last female figure for awhile (no offense ladies), so alas, it appears as though I will not be able to fulfill that dream. I'll stil do the male charcters though. Anyhoo, here's the ingredients list.
Head/Torso/Waist-X-23
Legs-Warbird AKA Ms.Marvel
Feet/Hands/Tail-X2 Nightcrawler](userimages/customs/5500/5093-1.jpg) Nocturne Marvel Legendsby nigmaPart of my plan to make the Exiles/AoA figure assortment (the two lines are tied together by a couple characters). Unfortunately this will be my last...4 comments | ![[Ultimate Deadpool] Body:ML Classic Cyclops figure
Head:Some Hawkman head shaved down
Alternate Head:ML Ghostrider
I wish I knew how to paint a lot better than this, because the figure is one of my better ones. It was a little difficult to figure out exactly how to do this figure because every reference pic I had showed him a little different. None of them had him with weapons other than a knife and a gun though. I made them, but they didn't look right when I took the pics.
For the skull head, I took ML series 3 (I think) Ghostrider head, shaved off the flames, added FIXIT eyes, painted it, then covered it with an epoxy resin. It isn't as clear as as would have like it, but I think it's the best part of the figure. The head are interchangeable due to magnets.
I'm not sure why I haven't seen this figure more often, with all the Deadpools out there. But anyways, here's my version of the Ultimate Merc With the Mouth.](userimages/customs/5000/4893-1.jpg) Ultimate Deadpool Marvel Legendsby nigmaBody:ML Classic Cyclops figure
Head:Some Hawkman head shaved down
Alternate Head:ML Ghostrider
I wish I knew how to paint a lot better than this, bec...5 comments |
![[Panthro] After I finished my Lion-o custom, I just had to do Panthro. I made this one out of another Ed McGuiness figure, so that it would match Lion-o, but I didn't articulate it as much as Lion-o. I used the head from a Joe Fixit figure, and (this is my favorite part) the ears off of a Green Goblin figure. The spikes are just nails, and the rest is FIXIT Sculpt.](userimages/customs/5000/4768-1.jpg) Panthro Thundercatsby nigmaAfter I finished my Lion-o custom, I just had to do Panthro. I made this one out of another Ed McGuiness figure, so that it would match Lion-o, but I...1 comments | ![[Lion-o] This figure went through so many changes. What I ended up doing, was taking an Ed McGuiness Public Enemies Superman figure because I love his art, but they aren't very articulated. So, I cut it at the waist, then used DCSH Azraels legs, and the feet from X3 beast. The hairdo was made using FIXIT Sculpt. The Claw Shield was made using FF4 movie Things hand and FIXIT Sculpt. I haven't been able to make a Sword of Omens yet, if anyone has any suggestions for what I could use, they would be appreciated.](userimages/customs/5000/4767-1.jpg) Lion-o Thundercatsby nigmaThis figure went through so many changes. What I ended up doing, was taking an Ed McGuiness Public Enemies Superman figure because I love his art, bu...0 comments |
|