![[Baby Cutie Pie] I used some clay I bought at Michaels last year, don't remember which one, baked it then sanded and applied apoxie clay to fill some holes as needed. Painted with Tamiya and Model Master paints. Baby Cutie Pie and Paci are characters I created for a childrens motion book I am trying to get published called Baby Cutie Pie Adventures. There is more information, including model sheets for some of the characters on my website.](userimages/customs/48000/47773-1.jpg) Baby Cutie Pie Unwrittenby Ricky LewisI used some clay I bought at Michaels last year, don't remember which one, baked it then sanded and applied apoxie clay to fill some holes as needed. ...5 comments | ![[Custom Dwyane Wade, Finals Patch 2012] I used the toyman figure as the base because of the body type to resemble DWade. Then dremeled the jersey parts out of the john wall figure and wrapped and glued these parts around the toyman. Used other parts off John Wall, like head, shoes and basketball. Used Apoxie Sculpt on the face and other areas. Painted with tamiya and model master acrylic paints. Buffed with a dry towel.](userimages/customs/44000/43778-1.jpg) Custom Dwyane Wade, Finals Patch 2012 DC Universeby Ricky LewisI used the toyman figure as the base because of the body type to resemble DWade. Then dremeled the jersey parts out of the john wall figure and wrappe...4 comments |
![[Tom Brady Custome Figure Removable Helmet] I used parts of a marvel legend figure, dont remember his name, and a mcfarlane series 27 brady figure, the one where he is kneeling. I cut the main parts of the brady figure with an exacto and dremmeled the meat out. I then covered the marvel figure with the pieces like clothes. I glued and used some apoxie clay to cover certain areas. I used testors model masters acrylics and made the football by hand. I also dremmeled the hell outt the helmet so it could go on his head.](userimages/customs/34500/34242-1.jpg) Tom Brady Custome Figure Removable Helmet Marvel Legendsby Ricky LewisI used parts of a marvel legend figure, dont remember his name, and a mcfarlane series 27 brady figure, the one where he is kneeling. I cut the main p...16 comments | ![[Michael Jordan Custom Figure (Removable Heads)] This is a resubmission. I cleaned up the paint job and some blemishes on the face by smooth sanding and did some work on the left arm. I also gave him another head, and made them removable, with that classic jordan tongue sticking out his mouth when he dunks!](userimages/customs/34500/34241-1.jpg) Michael Jordan Custom Figure (Removable Heads) Marvel Legendsby Ricky LewisThis is a resubmission. I cleaned up the paint job and some blemishes on the face by smooth sanding and did some work on the left arm. I also gave him...24 comments |
![[Lebron James (Red Jersey NBA Finals)] I used a cool ninja gaiden figure with great poseability and articulation as base and Steve Nash for parts and jersey. I used another lebron head I had and dremeled away at his cheeks to give him a more chiseled look and closed his mouth. Testors model masters and tamiya paints.](userimages/customs/33000/32806-1.jpg) Lebron James (Red Jersey NBA Finals) Marvel Legendsby Ricky LewisI used a cool ninja gaiden figure with great poseability and articulation as base and Steve Nash for parts and jersey. I used another lebron head I ha...8 comments | ![[Kobe Bryant Custom Articulated Figure] I used a bunch of different parts from various figures from my parts bin and parts from steve nash figure. I used the head and face of a Monkey Woman Obrien figure and dremeled away to make cheek bones, swapped up her nose and ears, made hair and finally got Kobe. Used testors model masters and tamiya paints.](userimages/customs/33000/32764-1.jpg) Kobe Bryant Custom Articulated Figure Marvel Legendsby Ricky LewisI used a bunch of different parts from various figures from my parts bin and parts from steve nash figure. I used the head and face of a Monkey Woman ...10 comments |
![[Michael Jordan Custom Articulated Figure] I used a marvel legends bullseye, for the articulation and like his cuts and poseable fingers. Series 19 McFarlane, Steve Nash for the dremeled out jersey and some other parts (basketball, stand). I dremeled down bullseye face and re-sculpted and cut ears off another figure and put them in like MJ's. Used Testors model masters and Tamiya paints. You could see alot more pictures on my website, rickyscomics.](userimages/customs/33000/32763-1.jpg) Michael Jordan Custom Articulated Figure Marvel Legendsby Ricky LewisI used a marvel legends bullseye, for the articulation and like his cuts and poseable fingers. Series 19 McFarlane, Steve Nash for the dremeled out je...16 comments | ![[Batman and Robin Animated Series Marquette's] I used two "10 base figures and glued the movable parts and joints since I was creating statues. I used apoxie sculpt, sanded and painted with testors and tamiya paints. You could see more pics on my site. Rickyscomics.](userimages/customs/31500/31318-1.jpg) Batman and Robin Animated Series Marquette's Batman Animatedby Ricky LewisI used two "10 base figures and glued the movable parts and joints since I was creating statues. I used apoxie sculpt, sanded and painted with te...6 comments |
![[Dwyane Wade - Revised] This is a resubmitted figure. I made some adjustments so his jersey looks less bulky and changed his arms, hip joints and gave him much more detail.](userimages/customs/31000/30614-1.jpg) Dwyane Wade - Revised Marvel Legendsby Ricky LewisThis is a resubmitted figure. I made some adjustments so his jersey looks less bulky and changed his arms, hip joints and gave him much more detail....2 comments | ![[Dirk Nowitzki] A deadman figure and many spare parts from the parts bin. Sculpted alot too with apoxie sculpt. Painted with Testors modelmasters and tamiya paints.](userimages/customs/31000/30613-1.jpg) Dirk Nowitzki Marvel Legendsby Ricky LewisA deadman figure and many spare parts from the parts bin. Sculpted alot too with apoxie sculpt. Painted with Testors modelmasters and tamiya paints....5 comments |
![[Lebron James Vs D Rose] I have listed these customs already but thought it would be fun to put up some pics of these two mvp's battling it out like they did in the playoffs. I know this is gonna prob piss some people off, but I don't care, go heat!!!](userimages/customs/30000/29904-1.jpg) Lebron James Vs D Rose Marvel Legendsby Ricky LewisI have listed these customs already but thought it would be fun to put up some pics of these two mvp's battling it out like they did in the playoffs. ...6 comments | ![[Drose] Marvel legend bullseye for articulation, pieces of series 19 McFarlane figures and hand sculpted the face and other parts with apoxie clay. Testors and tamiya paints.](userimages/customs/30000/29903-1.jpg) Drose Marvel Legendsby Ricky LewisMarvel legend bullseye for articulation, pieces of series 19 McFarlane figures and hand sculpted the face and other parts with apoxie clay. Testors an...9 comments |
![[Dwyane Wade Custom Action Figure] After buying the series 19 McFarlane Dwyane Wade 3 figure pack (with James and Bosh) I was very disappointed. Not so much with the articulation, as that was to be expected, but with the fact that it looked nothing like D Wade. I decided to make a figure that not only looked like Wade, but had great articulation for really cool basketball poses. I actually dremeled out the jersey of the original series 19 figure and used a marvel legends (mojo series) falcon figure and apoxie sculpt. If you want to see more pics with action poses, check out my site. Rickyscomics](userimages/customs/29500/29478-1.jpg) Dwyane Wade Custom Action Figure Marvel Legendsby Ricky LewisAfter buying the series 19 McFarlane Dwyane Wade 3 figure pack (with James and Bosh) I was very disappointed. Not so much with the articulation, as th...3 comments | ![[Lebron James Custom Action Figure] After buying the series 19 McFarlane lebron james figure I was a bit disappointed. Not so much with the articulation, as that was to be expected, but with the fact that it looked very little like LeBron James. The detail was amazing, but thats beside the point. I decided to make a figure that not only looked like james, but had great articulation for really cool basketball poses. I even got the height spot on as he's a bit over "6 1/2 inches tall, making him close to the 6-8 frame of LBJ. I actually dremeled out the jersey of the original series 19 figure and used vigilante as a main base with parts from other marvel legend figures from the parts bin. I decided to do the black jersey since Mcfarlane lists it as a collectors item, variant rare. If you want to see more pics with action poses, check out my site. Rickyscomics](userimages/customs/29500/29215-1.jpg) Lebron James Custom Action Figure Marvel Legendsby Ricky LewisAfter buying the series 19 McFarlane lebron james figure I was a bit disappointed. Not so much with the articulation, as that was to be expected, but ...9 comments |
![[Poison Ivy Animated Figure] DC Universe supergirl, apoxie sculpt, pleather and tamiya/model masters acrylic paints. This is a redo of an already submitted figure. Resculpted her face.](userimages/customs/28000/27663-1.jpg) Poison Ivy Animated Figure DC Universeby Ricky LewisDC Universe supergirl, apoxie sculpt, pleather and tamiya/model masters acrylic paints. This is a redo of an already submitted figure. Resculpted her ...2 comments | ![[The Riddler Animated Figure] Used a DC Universe Vigilante figure, apoxie sculpt, pleather and tamiya/model master acrylic paints.](userimages/customs/28000/27662-1.jpg) The Riddler Animated Figure |
![[Custom Batman Animated Series - Renee Montoya] Dollar store figures, apoxie clay, pleather and tamiya/model masters acrylic paints.](userimages/customs/27000/26821-1.jpg) Custom Batman Animated Series - Renee Montoya | ![[Detective Harvey Bullock Batman the Animated Serie] I used a dollar store figure and apoxie sculpt with tamiya and model masters acrylic paints.](userimages/customs/27000/26530-1.jpg) Detective Harvey Bullock Batman the Animated Serie |
![[Commissioner Gordon Batman the Animated Series] I used a dollar store figure 5pack. Apoxie sculpt and used tamiya and testors model masters paint.](userimages/customs/27000/26529-1.jpg) Commissioner Gordon Batman the Animated Series | ![[Batman the Animated Series Batman BTAS TAS] I used a dollar store figure that came in a 5 pack, apoxie sculpt, pleather and Tamiya and Testors model masters acrylic paints to make my own version of TAS Bats.](userimages/customs/26500/26265-1.jpg) Batman the Animated Series Batman BTAS TAS Batman Animatedby Ricky LewisI used a dollar store figure that came in a 5 pack, apoxie sculpt, pleather and Tamiya and Testors model masters acrylic paints to make my own version...4 comments |
![[Poison Ivy, BTAS, Batman Animated Series] This is an Ivy I had already posted, but I touched her up, and repainted her hair, lips, eyes.](userimages/customs/26000/25905-1.jpg) Poison Ivy, BTAS, Batman Animated Series | ![[Custom 6" Animated JLU Batman] This is another 6" Custom animated Batman, from the justice league unlimited cartoon show.](userimages/customs/26000/25827-1.jpg) Custom 6" Animated JLU Batman |
![[Custom 6" Poison Ivy from Batman the Animated] This is the 6th custom I've done for the BTAS batman animated series, and 4th character, Poison Ivy. I used a 6" powergirl dc universe action figure. Sculpted the various parts (boots, scallops, leaves on underwear, lips, eyes, hair and crossbow) with apoxie sculpt. I used pleather to make the crossbow holder and painted it and everything with Testors model masters acrylics. Let me know what you think. :)](userimages/customs/26000/25793-1.jpg) Custom 6" Poison Ivy from Batman the Animated Batman Animatedby Ricky LewisThis is the 6th custom I've done for the BTAS batman animated series, and 4th character, Poison Ivy. I used a 6" powergirl dc universe action fig...2 comments | ![[Custom JLU Max from Batman beyond] This is Max from Batman Beyond, the DCAU. I used a jlu hawkgirl I think, and apoxie sculpt and model masters acrylics. I did it 3 years ago (its one of my first customs), before I learned how to take good pics. lol. I still think its a good add though as I haven't seen another custom of her on here.](userimages/customs/26000/25772-1.jpg) Custom JLU Max from Batman beyond |
![[Custom JLU Lex Luthor Merge with Brainiac] This is one of my first/older customs, but thought it was a good add. I used a lex luthor figure and did a lot of sculpting with apoxie sculpt. I liked this season finale for JLU, and thought it would be a cool figure to make. Sorry about the grainy pics, this was along time ago, before I knew how to take good pics. :/](userimages/customs/26000/25771-1.jpg) Custom JLU Lex Luthor Merge with Brainiac | ![[Batman and Robin Animated Series] This is my third Batman animated version attempt, and I do think its the best one yet. My first attempt at robin. I used two dc universe figures (blue devil and another), and after dremeling down certain parts I smoothed over grooves with apoxie sculpt. Cut a little out of the legs and arms that would be the robin figure so he would be a little shorter than batman.I sanded, then painted with model master and tamiya paints. I must say, there is nothing better than customizing. I absoultely love, taking one figure and transforming it into a figure you have always visualized seeing, and I am quite happy with the result. Too bad these ones where commissions. :(](userimages/customs/25500/25226-1.jpg) Batman and Robin Animated Series DC Universeby Ricky LewisThis is my third Batman animated version attempt, and I do think its the best one yet. My first attempt at robin. I used two dc universe figures (blue...7 comments |
![[Custom Batman Animated Figure & Joker] This is the second batman I did as a request. I used a shazaam 6" dc universe figure and used baking soda and crazy glue and sanded to give figure smooth look. Pinted with model masters acrylics. I took a joker I originally done and ripped the pleather off, and used apoxie sculpt to make the clothes.](userimages/customs/25000/24886-1.jpg) Custom Batman Animated Figure & Joker Batman Animatedby Ricky LewisThis is the second batman I did as a request. I used a shazaam 6" dc universe figure and used baking soda and crazy glue and sanded to give figur...5 comments | ![[Custom Joker Batman Animated Series] This is a custom Joker from the 90's animated tv show (BTAS). The character was sculpted with the gap and fill method. Using crazy glue, baking soda and sanding. I painted with model master paints. I used pleather to make the clothes.](userimages/customs/25000/24671-1.jpg) Custom Joker Batman Animated Series DC Universeby Ricky LewisThis is a custom Joker from the 90's animated tv show (BTAS). The character was sculpted with the gap and fill method. Using crazy glue, baking soda a...3 comments |
![[Custom Buff Superman] I got the heman vs superman two pack and decided supes was way to scrawney. I was like, are you kidding me! He-man looked great! Buff, remided me of Arnold S in the Mr Olympia photos. I decided to give superman that body, the body superman was suppossed to have. To offset supermans small head, I attached his skinnier forearms and lower legs to the MOTU base. Used model master acrylics and a different superman cape. Now this is the way the strongest man on earth should look! lol](userimages/customs/24500/24488-1.jpg) Custom Buff Superman DC Universeby Ricky LewisI got the heman vs superman two pack and decided supes was way to scrawney. I was like, are you kidding me! He-man looked great! Buff, remided me of A...7 comments | ![[Batman Animated Series Batman] I used a shazaam 6" dc universe figure. I used baking soda and crazy glue to fill gaps and muscle cuts and sand to give a smooth, cartoon like look. I painted with Tamiya paints and made the cap out of the crazy glue cap and wood.](userimages/customs/24500/24417-1.jpg) Batman Animated Series Batman Batman Animatedby Ricky LewisI used a shazaam 6" dc universe figure. I used baking soda and crazy glue to fill gaps and muscle cuts and sand to give a smooth, cartoon like lo...6 comments |
|