![[X-Force Warpath (modern)] Swapped a Hulkling head with a TNA Wrestler and dremmeled the vest pattern flat. Added knives from a Legendary Heroes figure.](userimages/customs/14000/13993-1.jpg) X-Force Warpath (modern) | ![[X-Force Elixir] This one was more tricky, as I needed the adelescent build of a teenager. I used Asgardian and swapped the lower legs with a TNA Wrestler for the boots. Used Reed Richards head with sculpted hair. Repaint with gold skin and X-Force uniform. I left Asgardian's gauntlets, repainted in X-Force colours (I figured with what X-Force gets up to these days, he'd need all the protection he can get!!!).](userimages/customs/14000/13992-1.jpg) X-Force Elixir Marvel Legendsby X-Fanatic81This one was more tricky, as I needed the adelescent build of a teenager. I used Asgardian and swapped the lower legs with a TNA Wrestler for the boot...0 comments |
![[X-Force Wolfsbane] Swapped X-23 head with a Wasp & hands from a Ms Marvel. Repaint hair & unform.](userimages/customs/14000/13991-1.jpg) X-Force Wolfsbane | ![[X-Force Archangel] Simple repaint of the new X-Force uniform!](userimages/customs/14000/13990-1.jpg) X-Force Archangel |
![[AoA Dark Beast] Started by dremmeling the belt and leg fur down. Then sculpted the trousers carefully (This took ages to keep full articulation - WHAT A PAIN IN THE BUTT!)!
Did the hair by cutting up a Kraven jacket and gluing it on the head. Then scupted over the gaps and repainted black, with various layers and shades of grey.
Thought it came out quite well! Let me know what you think!](userimages/customs/12000/11706-1.jpg) AoA Dark Beast Marvel Legendsby X-Fanatic81Started by dremmeling the belt and leg fur down. Then sculpted the trousers carefully (This took ages to keep full articulation - WHAT A PAIN IN THE B...7 comments | ![[AoA Nightcrawler] First saw this recipe by Wings, and thought it was brilliant!
Just swapped the base figure head with a Dracula head (from ML Monsters Boxset). Sculpted armor and sword sheaths, then repainted. Made swords from CXM Ultimate Nightcraler accessories.
Hope you like, comments are appreciated!!!](userimages/customs/12000/11705-1.jpg) AoA Nightcrawler Marvel Legendsby X-Fanatic81First saw this recipe by Wings, and thought it was brilliant!
Just swapped the base figure head with a Dracula head (from ML Monsters Boxset). Sculpt...3 comments |
![[AoA Cannonball] Used a Patriot torso for the shoulder pads, and a TNA Wrestler for the head, arms and legs. Sculpted the hair and body armor and repainted with citadel paints. Hope you like!
Cannonball's "big" sis, AoA Amazon, is on the way too!](userimages/customs/12000/11704-1.jpg) AoA Cannonball Marvel Legendsby X-Fanatic81Used a Patriot torso for the shoulder pads, and a TNA Wrestler for the head, arms and legs. Sculpted the hair and body armor and repainted with citade...0 comments | ![[Armor (Astonishing X-Men)] Real quick one! Simply swapped Shadowcat's head with X-23, and sculpted a fringe! Easiest custom I've done :)](userimages/customs/12000/11676-1.jpg) Armor (Astonishing X-Men) |
![[Mutant X Iceman] Sculpted the little goatee, mowhawk and X-Symbol, then a simple repaint! Turned out nice and it's looking good with my ever growing Mutant X collection!
NEXT UP: Mutant X Marvel Woman, AoA McCoy and Pixie](userimages/customs/10500/10409-1.jpg) Mutant X Iceman Marvel Legendsby X-Fanatic81Sculpted the little goatee, mowhawk and X-Symbol, then a simple repaint! Turned out nice and it's looking good with my ever growing Mutant X collectio...1 comments | ![[Mutant X Fallen] I'm really happy with this!!! Took an ML Angel and swapped the head with a Dracula from the ML Monsters Boxset. Also swapped hands with Werewolf By Night's claws to make the Fallen's talons. Sculpted the hair and put the Annihilus wings on! Simple repaint after that.](userimages/customs/10500/10408-1.jpg) Mutant X Fallen Marvel Legendsby X-Fanatic81I'm really happy with this!!! Took an ML Angel and swapped the head with a Dracula from the ML Monsters Boxset. Also swapped hands with Werewolf By Ni...2 comments |
![[Mutant X Havok] Just swapped heads with a Movie Punisher and sculpted belt and gauntlets.](userimages/customs/10500/10360-1.jpg) Mutant X Havok | ![[Random] Here it is, I've been working on this for SO long and I'm really proud of the finished product! I used a Frankenstein's Monster base with the furry jacket turned inside out and sculpted a collar/pocket. I then added some Sandman forearms to gain dettacable hands. I cut off the sand weapons on the arm fixtures and sculpted the bio-cannons, one with a spring loaded gun for novelty value.
The hardest part was the head suprisingly. I was determined to use Punisher's head from the Urban Legends as I thought it was perfect, but when I popped it off, it had the ball joint on the body end instead of the normal head end - WHY TOYBIZ, JUST TO BE AWKWARD!?! I ended up drilling into the figure's neck joint and glueing an upside down nail into the hole to give the forward-backward action. Then I cut off the awkward ball from the head joint and drilled into the neck stem to make a tube to fit over the nail snugly (I hope that's clear). So the head lost no articulation, but took a lot of work. Sculp](userimages/customs/10000/9921-1.jpg) Random Marvel Legendsby X-Fanatic81Here it is, I've been working on this for SO long and I'm really proud of the finished product! I used a Frankenstein's Monster base with the furry ja...1 comments |
![[Young X-Men Dust] Used Wings' superb design of the Jean Grey with hair removed and a bit of putty to make the veil (I think it's official name is a niqab or burka). Just added a Psylocke belt, painted black & yellow and voila!!!
Thanks again for the inspiration Wings! :)](userimages/customs/10000/9920-1.jpg) Young X-Men Dust Marvel Legendsby X-Fanatic81Used Wings' superb design of the Jean Grey with hair removed and a bit of putty to make the veil (I think it's official name is a niqab or burka). Jus...1 comments | ![[X-Force X-23] Simple repaint. Love this new look though!!!](userimages/customs/9500/9454-1.jpg) X-Force X-23 |
![[Stryfe] Swapped the Sinister head with a X-Men Classics Magneto head. Added plenty of putty to make the fine details to the costume and dremelled the diamond off the chest. Also used the groin cloth from the Magneto figure for the same on Stryfe. Used an Elseworlds Superman cape. The blades on the forearms & boots AND the sections of the helmet are cut from a baking tray, and YES, THEY ARE AS SHARP AS THEY LOOK!!! (I have the scars to prove it).
This is my first attempt and 1st major conversion, so I'm quite happy, but I know what I'll do different next time and improve with the next one!!!](userimages/customs/9500/9453-1.jpg) Stryfe Marvel Legendsby X-Fanatic81Swapped the Sinister head with a X-Men Classics Magneto head. Added plenty of putty to make the fine details to the costume and dremelled the diamond ...3 comments | ![[Modern Cannonball] Very simple repaint, I thought the wrestling figure's head was a great match for the modern Sam Guthrie. Just added a Stealth Wolverine set of goggles. Added a bit of putty around the neck for the collar.](userimages/customs/9500/9309-1.jpg) Modern Cannonball Marvel Legendsby X-Fanatic81Very simple repaint, I thought the wrestling figure's head was a great match for the modern Sam Guthrie. Just added a Stealth Wolverine set of goggles...2 comments |
![[Zero] Another simple repaint, just sprayed white, and painted the 'O's on!
I loved the X-Force book in the early 90's, especially the X-Cutioner's Song crossover. It centred around Stryfe, and Zero here is his constant silent robot companion and teleportation device. Master Stryfe is on his way!!!](userimages/customs/9000/8909-1.jpg) Zero Marvel Legendsby X-Fanatic81Another simple repaint, just sprayed white, and painted the 'O's on!
I loved the X-Force book in the early 90's, especially the X-Cutioner's Song cros...1 comments | ![[Modern Luke Cage] A simple repaint, seen before. Why change a great recipe!?!
LETS BEAT SOME SKRULLS!!!](userimages/customs/9000/8908-1.jpg) Modern Luke Cage |
![[AoA X-Man] I really loved the recipe posted by atgscl. A lot of people are using the Xorn figure, but I thought the Bird Of Prey Angel head matched it really well. I used a little putty to match outfit design in the original AoA issues, and cut a little slice off the energy parts and glued it to the eye, I think it worked really well!
Let me know what you think!](userimages/customs/9000/8886-1.jpg) AoA X-Man Marvel Legendsby X-Fanatic81I really loved the recipe posted by atgscl. A lot of people are using the Xorn figure, but I thought the Bird Of Prey Angel head matched it really wel...3 comments | ![[Siryn] I know, not another Psylocke figure, but she's such a great female base figure & easy to get lots of. I thought she was excellent for Siryn, so drilled some holes to attach the left over Banshee capes from my AoA Banshee conversion and added a bit of putty to detail her costume. Hope you like!](userimages/customs/9000/8604-1.jpg) Siryn Marvel Legendsby X-Fanatic81I know, not another Psylocke figure, but she's such a great female base figure & easy to get lots of. I thought she was excellent for Siryn, so dr...2 comments |
![[AoA Banshee] A simple repaint with some of Mr.Sinister's cape stuck to the arms as his own cape. Also sculpted some wicked bum Age Of Apocalypse sideburns. (Saving the Banshee stripy cape for a Siryn figure).](userimages/customs/8000/7603-1.jpg) AoA Banshee X-Menby X-Fanatic81A simple repaint with some of Mr.Sinister's cape stuck to the arms as his own cape. Also sculpted some wicked bum Age Of Apocalypse sideburns. (Saving...1 comments | ![[AoA Quicksilver] This started out as simple repaint, but wasn't happy about having to leave the "X"s off his shoulders, due to the joint. I ended up making X shoulder pads to just hang over the shoulder joint using little bits of Mr.Sinister's cape and green stuff from Games Workshop, it worked really well! Also used cape for a belt.](userimages/customs/8000/7602-1.jpg) AoA Quicksilver X-Menby X-Fanatic81This started out as simple repaint, but wasn't happy about having to leave the "X"s off his shoulders, due to the joint. I ended up making X...2 comments |
![[Black Knight] This was a recipe in Toyfare a while back. Dremmelled the feet down and cut down the cape to fit character's look. I used putty for the cape buckles. I also added a LoTR Aragorn sword and sheath on the belt. Swapped a Wonderman head, and a total repaint later, this is what I got. I'm trying to make a helmet as well, but struggling to get it right, so I'll add it at a later date with a shield.](userimages/customs/7500/7111-1.jpg) Black Knight Marvel Legendsby X-Fanatic81This was a recipe in Toyfare a while back. Dremmelled the feet down and cut down the cape to fit character's look. I used putty for the cape buckles. ...1 comments | ![[Emma Frost] This is obviously a popular conversion, but looking at the hideous job Hasbro made of it, it's also obvious why! A simple swap of the Hasbro head with a Movie Jessica Alba head was expected, HOWEVER, I wasn't expecting the base figure to have a neck like a girafe (Thanks Hasbro)!!! It looked stupid, so I ended up sawing about 5mm off the neck and reattaching the joint further down to retain all the movement. I was really worried it was going to ruin it, but it worked well. I'm a little disappointed with the paint finish on the face, but at least the skin tone is closer now. Let me know your thoughts.](userimages/customs/7500/7110-1.jpg) Emma Frost Marvel Legendsby X-Fanatic81This is obviously a popular conversion, but looking at the hideous job Hasbro made of it, it's also obvious why! A simple swap of the Hasbro head with...2 comments |
![[New X-Men Cyclops] I dremmeled the chains off the chest area and made the visor and chest X out of putty. Painted chest to match character's t-shirt and repainted hair & visor. JOB DONE!!!](userimages/customs/7500/7109-1.jpg) New X-Men Cyclops Marvel Legendsby X-Fanatic81I dremmeled the chains off the chest area and made the visor and chest X out of putty. Painted chest to match character's t-shirt and repainted hair &...1 comments | ![[HoM Spider-Man] A basic Spider-Man repaint based on the HoM Universe.](userimages/customs/7500/7108-1.jpg) HoM Spider-Man |
![[AoA Sunfire] Hi there, this is my first custom and first submission to the site, so please be gentle! I know this is a really popular character, and I've always thought it was a great design. I thought it'd be an easy repaint to try as my first attempt at customising. Rather than just repainting though, I ended up adding most of the black sections of the uniform with putty, filed the nose down and added a putty mask. Let me know what you think. Thanks.](userimages/customs/6000/5612-1.jpg) AoA Sunfire Marvel Legendsby X-Fanatic81Hi there, this is my first custom and first submission to the site, so please be gentle! I know this is a really popular character, and I've always th...2 comments | |
|