![[Hank Pym] Let me start off by saying that it is a complete coincidence that this figure looks exactly like me. I wanted to make a version of Hank Pym that looked like he had been working in a lab very diligently. I got the idea while watch the Avengers: Earth's Mightiest Heroes. He wears his suit under a lab coat. On to Bill/Hank Pym's recipe
Head- McFarlane Man of Magic with repainted face and sculpted beard. Not to mention a good amount of dremeling on the neck to make it fit.
Neck to knees is a DCUC Superboy. Repainted completely
Below the knees- DCUC Kamandi ( dremeled to eliminate paint rub)
Arms- Movie Masters Joker thug...painted *shudders* white.
Jacket- Movie Cyclops
Hands are from a Heroes' Peter.
The belt buckle is from a DC Lex Luthor and it actually glows in the dark! Thanks for looking!](userimages/customs/32000/31898-1.jpg) Hank Pym Marvel Legendsby billmaruLet me start off by saying that it is a complete coincidence that this figure looks exactly like me. I wanted to make a version of Hank Pym that look...7 comments | ![[Steeler's Fan] Hey guys! This was a custom I did for a friend. Pretty simple, really. I repainted a Zatanna head/hair. Painted the stomach black to resemble a shirt. The fun part was painting the Steeler's logo on her shirt. I think it turned out alright, seeing that the project was on a rush status.](userimages/customs/32000/31897-1.jpg) Steeler's Fan Originalby billmaruHey guys! This was a custom I did for a friend. Pretty simple, really. I repainted a Zatanna head/hair. Painted the stomach black to resemble a shir...3 comments |
![[Vigilante] This was a very special project. A man I had recently met, wanted a First Appearance Vigilante custom to commemorate his father who had recently passed away. The Vigilante's look encompassed all that his father was. A hard as nails cowboy who fought with every ounce of his fiber. This job was of no charge. I just couldn't justify charging for job like this. On to the recipe-
Head- ML Punisher (Hair was given a heavier blue dry-brush)
Hat- ML Logan- Dremeled out the inside a bit and gave it a clean white painting.
Upper torso- ML Patriot (Dremeled off the star and gave it a full repaint, even if the blue is similar)
Fore arms and gloves- LCBH Madman. Sculpted the forearms to resemble fabric.
Legs and lower torso- MM Joker Thug (Painted khaki and given a dusty paintbrush)
Boots- Pretty sure these were from a movie ghost rider. I may be wrong.
Guns and Gun belt- Retooled Movie Jonah Hex
Belt Buckles were both sculpted along with his handkerchief.
Lasso is a piece of string super glue](userimages/customs/31500/31414-1.jpg) Vigilante D.C. Universeby billmaruThis was a very special project. A man I had recently met, wanted a First Appearance Vigilante custom to commemorate his father who had recently pass...15 comments | ![[Initiative War Machine] Nothing too crazy here. I painted all of the white silver. Shaved off the leg fins. The legs are where the real work is. I replaced the hip ball joints with Super Patriot hips. The thighs are from a movie Iron Man (I forget which one, but they are easy to come by.) That pretty much wraps this one up.](userimages/customs/31500/31413-1.jpg) Initiative War Machine Marvel Legendsby billmaruNothing too crazy here. I painted all of the white silver. Shaved off the leg fins. The legs are where the real work is. I replaced the hip ball join...5 comments |
![[Punisher] Nothing too crazy here. I needed a Punisher that looked semi decent to fit in with my Marvel Universe figures.I used a Showdown Punisher body, added a holster to his hip and a harness from the GI Joe line. Took a MU Logan head, shaved it down and then sculpted in the hard edges. Voila! Punisher ready to hold his own in the smaller scale world. (By the way, I did this at least a year ago.)](userimages/customs/31000/30907-1.jpg) Punisher Marvel Universeby billmaruNothing too crazy here. I needed a Punisher that looked semi decent to fit in with my Marvel Universe figures.I used a Showdown Punisher body, added a...4 comments | ![[Nightcrawler] Yes... I did another Nightcrawler. This however, may be my favorite Kurt head to date. It was as simple as cutting the ears off of ML9's Nightcrawler and attaching them to a DCUC Sodam Yat's head. Paint and attach the head. And BAMF! No more ugly gargoyle head. I hope you guys like this as I am very pleased.](userimages/customs/31000/30906-1.jpg) Nightcrawler Marvel Legendsby billmaruYes... I did another Nightcrawler. This however, may be my favorite Kurt head to date. It was as simple as cutting the ears off of ML9's Nightcrawler...8 comments |
![[Kovah Yevad] This was a fun project for a friend of a friend. She wanted a figure made for her husband that resembled him and to implement some of his favorite items. Let me tell you, I have never played Kingdom Hearts... but I have nothing but respect for the Oblivion Keyblade. I sculpted the entire keyblade... insanity. Here comes the recipe-
Head- Random Battlestar Galactica figure (sculpted anime hair and gave him a real lip ring) Total repaint
Upper torso and arms- ML 9 Nightcrawler
Hands- TNA Chris Daniels
Cloth/Belt- Sota SF Gen (Added a holster for the lightsaber)
Boots- Cannonball
The lightsaber handle came from a Obi Wan Kenobi Transformer. The saber was cut from a paintbrush handle. I inserted a screw in the bottom so the saber can have an on and off mode.
The keybade is what it is. Completely sculpted besides the chains. I hope you guys like this original creation.](userimages/customs/31000/30905-1.jpg) Kovah Yevad Originalby billmaruThis was a fun project for a friend of a friend. She wanted a figure made for her husband that resembled him and to implement some of his favorite ite...1 comments | ![[Scarlet Spider Ben Reilly] Well this was my first Spider-Custom. I had picked up a loose SMC Scarlet Spider who didn't have his hoodie or his webshooters. I honestly bought him in order to fix him up properly. Sculpting the hoodie was a lot of fun as well as painting on the spider insignia by hand. His web shooters come from a ML Black Widow (ToyBiz). The belt was made from a Mr. Sinister strap, the cartridges came from a GI Joe bandolier and the buckle was completely sculpted. I repainted his eyes and his ankle pouches as well. That is pretty much all for this Peter Parker clone.](userimages/customs/30500/30419-1.jpg) Scarlet Spider Ben Reilly Marvel Legendsby billmaruWell this was my first Spider-Custom. I had picked up a loose SMC Scarlet Spider who didn't have his hoodie or his webshooters. I honestly bought him...6 comments |
![[Luke Cage] I think every Marvel collector deserves a modern version of Luke Cage on their shelf. So, yesterday I decided to make my own. Surprisingly, this took me only a few hours to complete from start to finish. Not sure if I am 100% sold on the head, but it works for now. Here's how I made him-
Head- The Spirit- Octopus (Full Repaint)
Sunglasses- Terminator figure
Arms & Hands- Monty Brown TNA
Upper Torso- SOTA Guile
Lower torso / Legs- Chad](userimages/customs/30500/30418-1.jpg) Luke Cage Marvel Legendsby billmaruI think every Marvel collector deserves a modern version of Luke Cage on their shelf. So, yesterday I decided to make my own. Surprisingly, this took...9 comments | ![[Forge] I had to update Forge. He needed his classic moccasin boots and non-plastic guns. I completely repainted Forge with citadel paints. His boots are made from Cannonball and Longshot feet. The tassels are rubber wire, individually hand cut and then glued. I added a ML Dr. Doom hand for his bionic hand. It actually holds his guns more securely than his factory hands! The guns were painted with Model Master Gun Metal and then drybrushed with silver and gold. I hope you guys like this update to Forge.](userimages/customs/30500/30417-1.jpg) Forge Marvel Legendsby billmaruI had to update Forge. He needed his classic moccasin boots and non-plastic guns. I completely repainted Forge with citadel paints. His boots are ma...5 comments |
![[Azurel] Azurel is an original character I made specially for my wife. We are both into medieval era...well, everything. She wanted a blue mage/warrior female and being a good husband, I provided! Here is a bit of a back story to really give her some life.
In the far off land of Yenoham magic and mysticism are what make the land thrive. It has always been this way until an unknown dark force began to take over the land with an incredulous force. A select few were chosen by the "Knowing", a spiritual being which rivals our version of mother nature, to drive this force back from whence it came.
Azurel was one of the few chosen. Her lightning-ice powers began to manifest when she defeated the last Ice Dragon in Yenoham with her spear and wits. She has since learned to hone her acquired powers and distribute them to anything she desires, including her armor. Her magic and athleticism are unmatched by few and put her at the top tier of warriors. Generally, when she leaves you fro](userimages/customs/30000/29912-1.jpg) Azurel Originalby billmaruAzurel is an original character I made specially for my wife. We are both into medieval era...well, everything. She wanted a blue mage/warrior female ...5 comments | ![[Liu Kang] Hello customizers! I am extremely happy to bring you my all-time favorite MK kombatant- Liu Kang. He is displayed in his new outfit for the upcoming MK. I am very pleased with how he came out and plan to do plenty more MK fighters. On to the recipe.
Head- DCUC Modern Starman (Dremeled, sculpted and retooled like crazy)
Upper torso and arms- Sota Ryu (Wrist guards are made of ML Logan's coat sleeves and sculpt)
Hands- Sota Gen's fists and open hands
Lower torso- ML Jigsaw
Legs- Sota Fei Long (Major dremel and sculpt job on the lower half)
Liu's belt/sash and MK dragon logo are sculpted. The tie in the back comes from a Sota Ryu's headband
Liu's side cloths are cut down Kung Lao cloths from the jazwares' figure. Dragons were painted on.
His fireball is a repainted plasma sword from NECA's Raziel.
I hope you guys enjoy this Shaolin Monk. I am very proud to display him on my shelf.](userimages/customs/29000/28614-1.jpg) Liu Kang Mortal Kombatby billmaruHello customizers! I am extremely happy to bring you my all-time favorite MK kombatant- Liu Kang. He is displayed in his new outfit for the upcoming...22 comments |
![[Ken Masters] I realize this is a simple custom but I couldn't stand Ken's hair design from SF IV. I went with a little more anime style to give him his cool factor back that the new mullet-bowl do took away. Anyways, I took the original hair off and completely sculpted his new hair. I gave him a few fire effects as well to add a little more punch to my Ken. I hope you guys like him as I am very pleased with his new look.](userimages/customs/29000/28516-1.jpg) Ken Masters Street Fighterby billmaruI realize this is a simple custom but I couldn't stand Ken's hair design from SF IV. I went with a little more anime style to give him his cool facto...1 comments | ![[Quicksilver] Another repaint? You bet. This was a quick (no pun intended) and easy fix here for ole Pietro. Flesh tone repaint, darker shorts and some drybrushing. There you have a Quicksilver to be proud of. I included a comparison of the original as well. Enjoy.](userimages/customs/28500/28261-1.jpg) Quicksilver Marvel Legendsby billmaruAnother repaint? You bet. This was a quick (no pun intended) and easy fix here for ole Pietro. Flesh tone repaint, darker shorts and some drybrushing....0 comments |
![[The Blob] Basically all we have here is a simple wash with a drybrush on his skin and hair to give Blob a more realistic feel. Citadel paints are our heroes.](userimages/customs/28500/28236-1.jpg) The Blob Marvel Legendsby billmaruBasically all we have here is a simple wash with a drybrush on his skin and hair to give Blob a more realistic feel. Citadel paints are our heroes....6 comments | ![[Wolverine] This is basically a simple modding and repaint. I repainted the entire figure giving him more obvious arm hair and some stubble. The claws were removed and then replaced with claws I cut from gift cards for durability. Also, the shoulder pads were moved closer to the shoulders. That about sums it up! Hope you guys like one of the most overdone customs on figurerealm!](userimages/customs/28500/28235-1.jpg) Wolverine Marvel Legendsby billmaruThis is basically a simple modding and repaint. I repainted the entire figure giving him more obvious arm hair and some stubble. The claws were remov...1 comments |
![[Kabal] Hello MK fans. Today I present you with the hook-sword wielding, ex-Black Dragon member, Kabal. This is a birthday present for my best friend. We both agreed that Kabal's best look was from his MK3-Trilogy days, so I did my best to recreate the nostalgia. I will move on to the lengthy recipe now... Happy birthday, Scott!
Recipe:
Head- FO Jigsaw (Sculpted mask and top half of the hair) Bottom half of hair was from a Buffy figure.
Torso- Punisher (Sculpted shirt and neck brace)
Shoulders- ML Longshot
Arms- Sota Fei Long
Hands- Madman
Legs- Punisher (Sculpted creases for knee pad indents and tucked in pant legs)
Shoes- Deluxe wrestling figure (Dremeled off laces and sculpted over)
Belt- 2 ML Sinister straps wrapped around the waist. Added fodder pieces for respirator packs.
The respirator canister on the belt was made from a DCUC Orion flying contraption jet.
The tubes on his mask and respirator are craft tubing.
Bottom of his shirt came from a DCUC Dr. Midnight
Hook swords- This was an](userimages/customs/28500/28045-1.jpg) Kabal Mortal Kombatby billmaruHello MK fans. Today I present you with the hook-sword wielding, ex-Black Dragon member, Kabal. This is a birthday present for my best friend. We both...10 comments | ![[Whirlwind] Here we have another Iron Man classic villain, Whirlwind. His design was heavily inspired by Stevid's Whirlwind.
Recipe-
Head- DCUC Guy Gardner (Sculpted helmet)
Body- DCUC Copperhead
The blades are from 2 tracing wheels you can find in any crafts section and are attached via rare earth magnets.
Sculpted the boot cuffs, wrist straps, waist bands, chest armor and helmet. Complete repaint and dremel work to eliminate all paint rub. Hope you guys enjoy this Blast (no pun intended) from the past.](userimages/customs/27500/27363-1.jpg) Whirlwind Marvel Legendsby billmaruHere we have another Iron Man classic villain, Whirlwind. His design was heavily inspired by Stevid's Whirlwind.
Recipe-
Head- DCUC Guy Gardner (Scul...4 comments |
![[Blizzard] This was a fun custom to do. I made Blizzard here for a friend who has had a sudden craving for an old school helping of Iron Man's rogues gallery. Blizzard seemed like he needed to be done in the 6 inch way, so here he is. I took the old toy biz design from the 4-5" figure. The tanks were heavily influenced by boskoes' addition to their Blizzard. On to the recipe-
Head- Moon Knight (Sculpted mask)
Body- Nick Fury Shield 2 Pack (Sculpted ice design on gloves)
Boots- Luke Cage ankles and Moon Knight's feet- (sculpted ice design on boot cuffs)
Straps are foam sheets.
The ice tanks are from a NECA Delta Big Daddy (Fully repainted and added a tube to connect the tanks)
Hope you guys enjoy this (ice) blast from the past!](userimages/customs/27500/27082-1.jpg) Blizzard Marvel Legendsby billmaruThis was a fun custom to do. I made Blizzard here for a friend who has had a sudden craving for an old school helping of Iron Man's rogues gallery. ...3 comments | ![[Nick Fury] Hello customizers! Today I bring you one of my top five heroes : Nick Fury. This was a passion project for me. I had wanted a better Nick Fury for years, but just never seemed to be able to figure out what outfit I wanted him in. I decided to take elements from different designs and go with the post-S.H.I.E.L.D. Secret Warriors feel (No S.H.I.E.L.D. logo. I hope you guys like him as he is definitely one of my favorite customs I have ever created. Also, picture 4 is purely for awesome value. That is all.
Recipe-
Head- XMC Magneto (Totally resculpted the hair, gave him ears, stubble) and yes the eyepatch is totally removable (Made from a stretchy rubber cord and sculpt)
Hands- FO Punisher
Biceps, elbows and forearms- ML4 Punisher
Shoulders- DCUC Hourman
The rest of the body is DCUC Vigilante
Chest straps are foamie sheet
Gun Holster, Armband and Belt- 2 Pack Nick Fury
Right Leg bands and pocket- ML Nick Fury
Left leg buckle strao- DCUC Super Boy
All other details on the chest were ma](userimages/customs/27000/26670-1.jpg) Nick Fury Marvel Legendsby billmaruHello customizers! Today I bring you one of my top five heroes : Nick Fury. This was a passion project for me. I had wanted a better Nick Fury for y...11 comments |
![[Hunter Higgs] This was an interesting job as I do not usually do statues. However, a mother asked me to make one of her son in his baseball uniform. How could I say no?
Base Body- 25th Anniversary Hartland Bat Boy figurine.(Sculpted tucked in shirt and made the pants more form fitting)
Head- NECA Christmas Story Ralphie ( Sanded off glasses and smoothed out facial features, Sculpted hair, eyebrows and baseball hat)
Added name and number on his back using sticker paper, superglue and a steady hand.
The dog is a fisher price lab completely repainted.
The base is a box set Fantastic Four base. Sculpted dirt and cut a home plate out of foamie sheet.
This will be a Christmas gift for hunter and I do hope he likes it.](userimages/customs/26500/26002-1.jpg) Hunter Higgs Originalby billmaruThis was an interesting job as I do not usually do statues. However, a mother asked me to make one of her son in his baseball uniform. How could I s...1 comments | ![[Exodus] This little gem from France took me about a month to complete. Mainly because I became a married man in the middle of the process, so you know how that goes. Anyways, Exodus was made for John, a good friend of mine, just in time for the holidays. On to the recipe... you may want to sit down.
Head- Quicksilver( full repaint with sculpted hair and added braids from a wrestling figure)
Body- DCUC Superman (Sculpted everything from the thighs down. Also, make sure you sand down Supe's chest or you will see the "S" imprint...even after 6 coats of paint) All joints were filed down to eliminate paint rub.
Forearms- ML Ronin (With sculpted bands)
Belt Sash- Bishop scarf with sculpted gold area and buckle. Fodder for cords.
Hands- Ronin pegs with Kang hands attached.
Shoulder pads- Prince Caspian - Peter
Wings were cut from foamie sheets and attached via magnets in the back for added movement.
Cape- ML Doom ( hood was removed, neck line sculpted to blend and sculpted buckle. The cor](userimages/customs/26500/26001-1.jpg) Exodus Marvel Legendsby billmaruThis little gem from France took me about a month to complete. Mainly because I became a married man in the middle of the process, so you know how tha...6 comments |
![[Rogue] Hello friends. Today I have something that is so simple, yet so genius (IMO). My friend (along with the rest of us collectors)couldn't stand the 40-something trying to look 20-something Original Rogue head. So, I made Rogue...well Rogue.The Wonder Woman head I used only needed her neck hole slightly dremeled bigger and that was it! Hope you guys like her.
Recipe-
Head- DCUC Wonder Woman (Sculpted Head band and painted hair.
Body- Box Set Rogue](userimages/customs/25500/25047-1.jpg) Rogue Marvel Legendsby billmaruHello friends. Today I have something that is so simple, yet so genius (IMO). My friend (along with the rest of us collectors)couldn't stand the 40-s...13 comments | ![[Iron Man MK VI Movie Repaint] I had a request to fix the Iron Man 2 Movie MK VI Marvel Select figure (what a mouthful, whew!) A friend of mine was unhappy that A. Diamond didn't paint the eyes in on the mask and B. Diamond painted a darker gold instead of silver in the correct places. Well I did what I had to do to make the ole Stark Armor movie accurate. I simply painted the eyes and lines in on the mask, painted flat black over all of the dark gold spots, then gave a heavy silver drybrush to said areas. Quick fix. Enjoy Guys.](userimages/customs/25000/24877-1.jpg) Iron Man MK VI Movie Repaint Marvel Selectby billmaruI had a request to fix the Iron Man 2 Movie MK VI Marvel Select figure (what a mouthful, whew!) A friend of mine was unhappy that A. Diamond didn't p...4 comments |
![[Jim Lee Jean Grey] Here we have yet another Jim Lee adaptation of a legendary marvel hero- Jean Grey. I made this for a friend to accompany his Jim Lee Cyclops. Luckily I learned my lesson last time and primer the body before painting the yellow. There is still at least 12 coats of Insignia Yellow on her. On to the recipe-
Head- 2-Pack Elektra (Complete repaint with Sculpted Head Band/Mask)
Shoulders/Elbows- Wasp
Feet- XMC Cyclops
Everything else- Psylocke
Sculpted The Wrist Bands, Thigh pads and bicep pads with AVES Fix-It sculpt.
Shoulder pads are shaved/dremeled down from a ML9 Nightcrawler.
Belt Buckle- 2 pack Wolverine
Belt- Sinister Strap
This was a doozy of a custom, but I completely eliminated all paint rub through dremeling and the superglue trick. I hope you guys enjoy here as she took forever to make.](userimages/customs/25000/24718-1.jpg) Jim Lee Jean Grey Marvel Legendsby billmaruHere we have yet another Jim Lee adaptation of a legendary marvel hero- Jean Grey. I made this for a friend to accompany his Jim Lee Cyclops. Luckily...4 comments | ![[Jim Lee's Cyclops] I had yet to try my hand at a Jim Lee Cyclops, so when a friend asked me to make one for him, I jumped at the chance. I learned a valuable lesson in making this custom "ALWAYS PRIMER BEFORE PAINTING YELLOW" I can't stress this enough. I think we all know this version of Scott Summers' history, so I will jump right to the recipe. I hope you guys like him.
Head and Hands- XMC Cyclops (Re-Painted)
Body- DCUC Superman (Base Coated Insignia Blue and Drybruhed)
Boots- DCUC Flash
Wrist, thigh and calve belts- Sculpted with AVES Fix-It Sculpt
The chest strap is partly sculpted and bits of fodder thrown in.
Belt- DCUC Robin with sculpted "X" belt buckle](userimages/customs/24500/24349-1.jpg) Jim Lee's Cyclops Marvel Legendsby billmaruI had yet to try my hand at a Jim Lee Cyclops, so when a friend asked me to make one for him, I jumped at the chance. I learned a valuable lesson in m...4 comments |
![[Memorandum Nightcrawler] This may contain spoilers for anyone who has yet to read X-Force #26. So please stop now if you haven't read this issue, but by now this is probably public knowledge. For me it was a truly sad day. I know that Marvel characters are killed off and brought back, but it was still impacting for me. I decided to commemorate Kurt in the outfit he was wearing when he died and the arm of Bastion that killed him. R.I.P Kurt, can't wait for you to be revived.
Recipe-
Body- ML Havok (Sculpted "X" symbol and used wire for his costume outline)
Hands and feet- ML Nightcrawler
Tail- XMC Ultimate Nightcrawler
Head- Embarrassing as this is... I can't remember what head I used. I know I sculpted the Ears and Hair. It is actually driving me crazy that I can't remember.
Bastion's arm was made from a ML Deathlok with a good amount of sculpt applied.
I hope you guys like my dedication to Kurt.](userimages/customs/23500/23269-1.jpg) Memorandum Nightcrawler Marvel Legendsby billmaruThis may contain spoilers for anyone who has yet to read X-Force #26. So please stop now if you haven't read this issue, but by now this is probably p...3 comments | ![[John Constantine] I recently came into an abundance of Hellblazer comics and immediately was hooked on the character of John Constantine. Such a surly, snarky, English man who practices magic and always gets into trouble... or worse. I had to make a custom of him and what better timing for this contest. I really liked the way artist, Marcelo Frusin, drew John and figured I would run off of his design.
Recipe:
Head- ML Mr. Fantastic (Sculpted hair and painted completely)
Arms, Hands and Jacket- BTVS Spike (with added waist tie from a Hush figure)
Torso and Legs- BTVS Angel (Drilled holes in collar to add the tie)I also sculpted the neck.
Tie was made from a Hush Commissioner Gordon and SOTA Ryu headband straps
The cigarette was made from a twist tie and cotton stuffing.](userimages/customs/23500/23268-1.jpg) John Constantine "V"by billmaruI recently came into an abundance of Hellblazer comics and immediately was hooked on the character of John Constantine. Such a surly, snarky, English ...4 comments |
![[Jubei Kibagami from Ninja Scroll] How is it possible that the main character of a hit anime full length feature, TV series and a comic book doesn't have his own figure? This was the question that brought me to the conclusion that I had to make Jubei into plastic form. He has always been one of my favorite characters, thus here he is. Here is a little back story from absolute anime before the recipe: Jubeii is a self hiring Ninja who roams the side of feudal Japan. He meets up with an old man named Dakuwan. Together, with a female ninja named Kagero, the battle against the evil Shogunate government. Unfortunately for these 3, the government has the 8 devils of Kimon, who prove to be quite lethal adversaries. Jubei is known for his expert sword fighting, and lightning fast body attacks. Of course no hero would be ready to fight without cunning intelligence as well!
Recipe:
Head - SOTA Fei Long (Sculpted hair and pony)
Entire body is SOTA Fei-Long. I dremeled his ankles down and sculpted his shin guards, sandals and](userimages/customs/23500/23267-1.jpg) Jubei Kibagami from Ninja Scroll "V"by billmaruHow is it possible that the main character of a hit anime full length feature, TV series and a comic book doesn't have his own figure? This was the q...16 comments | ![[Steve & Jaden] Here is another custom I did for one of my best friends and his son. Their birthday gifts from me were themselves immortalized in plastic form.
Steve Recipe (the father)
Head - Battlestar Galactica Apollo (Sculpted beard, parts of hair and added Glasses from a Hush Gordon)
Upper Torso and arms- BTVS Spiked (Sculpted wrinkles in shirt and added sleeves to give the dual layer shirt look)
Legs- Movie Ghostrider (Sculpted pant cuffs)
Shoes- Unknown boots (Painted to look like converse)
The Guitar is a painted Guitar Hero Guitar (Added strap and strap connections with fodder and nail heads)
Jaden Recipe ( The Son)
The torso is completely Franklin Richards repainted.
I added knee joints from a Wolverine Origins Sabretooth and shoulder/elbow hinges from an Indiana Jones)
His hair was sculpted and the glasses are from a Heroes' Hiro (modified to fit)
Jaden's hammer was a last minute decision due to his love of the Joker (also I felt a child should feel empowered like his favorite superhero/](userimages/customs/23500/23224-1.jpg) Steve & Jaden Originalby billmaruHere is another custom I did for one of my best friends and his son. Their birthday gifts from me were themselves immortalized in plastic form.
Stev...3 comments |
|