![[Cleric John Preston from Equilibrium] For this custom, I needed 2 ML6 Punisher jackets, 2 pistols from the Durham Red 2000 AD figure, and 10 buttons. I used buttoms from the Spiderman 2 Doctor Octopus figure. The jacket was soft plastic so I simply used an exacto knife to cut out the buttons.
The head was done by a friend. basically it is a modified longshot head.
So first, I painted the hands with black acryllic. I then had to pop off the ML6 punisher head using a halogen lamp. Putting the head under the lamp for 60 seconds did the trick and softened the plastic.
Next, I put the coat on and used super glue to glue the two lapels of the coat together. Then, I cut out a rectangular piece from the other punisher jacket, and glued it onto the current jacket. Next, I carefully glued down the 10 buttoms onto the coat, and painted them black.
Then you just use a dullcote painter sealant and thats that!](userimages/customs/11500/11126-1.jpg) Cleric John Preston from Equilibrium Marvel Legendsby d2euxFor this custom, I needed 2 ML6 Punisher jackets, 2 pistols from the Durham Red 2000 AD figure, and 10 buttons. I used buttoms from the Spiderman 2 Do...3 comments | ![[Nomad] I started with the Movie Masters figure and stripped down the cape, belt spiked gauntlets, and shoulder pads. I then applied apoxie sculpt to the areas that had those parts and then to the chest. I used an exacto knife for the small detail.
For the head, I took a ML10 cyclops, and a friend provided me with the facemask from McFarlane's Tortured Souls line. I believe the mask was from the 'suffering Bob' figure.
Then I applied blak acryllic paint with more expoxy and silver to touch up the visor.
It's obviously not a direct copy of the Nomad character but it was the best I could do with my abilities.
Thanks for Looking!](userimages/customs/11500/11124-1.jpg) Nomad Crysisby d2euxI started with the Movie Masters figure and stripped down the cape, belt spiked gauntlets, and shoulder pads. I then applied apoxie sculpt to the area...3 comments |