![[Aphrodite IX] Hello All,
For Aphrodite I used Witchblade hair, Psylocke face and lower body, white queen upper body, and X2 boots. sculpted boots parts, and a little around the wrists and thighs, and her undies. the holster was from ML daredevil. used real cloth around wrists thighs and for skirt. The most cool thing is the gun, I used plumbers putty to make a two part mold of a gun I had. I used more plumbers putty to put in the mold, then used oil as a release agent when it cured I had a duplicate of my gun :) I used the same technique for my tombraider figures guns if you want to check those out. I spent a lot of time on the painting for this figure and I hope you all like it. I wanted her skin tone to be really good then i kinda dirtied her up a little, but not too much. Thanks for looking :)](userimages/customs/42500/42213-1.jpg) Aphrodite IX Figure Realmby JohnnyfraggerHello All,
For Aphrodite I used Witchblade hair, Psylocke face and lower body, white queen upper body, and X2 boots. sculpted boots parts, and a littl...2 comments | ![[Sith Warrior] Hello all,
This custom is based on my character in Star Wars The Old Republic video game. She retains all articulation except the high chest. I wanted to give her armor as close to the game look as possible. the shoulder pads are strips of rubber glued to pieces of ML Bullseyes leg strap cut drilled and glued to shoulder joint. The forearm armor is same rubber strip and pieces of bullseye leg strap. Belt is real leather with sculpted buckle and bullseye belt pouches. cape is a LOTR Boromir i think. The horns are made like my Darth Maul figure, drilled holes and inserted finger nails from fodder figure glued and twisted with needle nose pliers. Everything is hand painted except the imperial logo and the cape. The lightsabers are styrene and sculpted hilts.](userimages/customs/38500/38131-1.jpg) Sith Warrior Star Warsby JohnnyfraggerHello all,
This custom is based on my character in Star Wars The Old Republic video game. She retains all articulation except the high chest. I wanted...2 comments |
![[Mara Jade] Actually one of my first customs I had never posted. Done before I knew about good paints and sculpting materials. I used Jean grey head from xmen movie figure, and sculpted all hair, belt etc. Enhanced the chest, used ML wasp hands, cape is from some figure not sure who. Hair and chest were sculpted with super sculpey, the kind u bake. I used a hair dryer on hot to harden :)](userimages/customs/34500/34061-1.jpg) Mara Jade Star Warsby JohnnyfraggerActually one of my first customs I had never posted. Done before I knew about good paints and sculpting materials. I used Jean grey head from xmen mov...5 comments | ![[Spawn] Hello all,
Have not posted in a while, wanted to do this a long time ago, I know there are a million, but wanted my own :) recipe is same as all others, sculpted all details and painted with testors model master acrylic. Cape is a t-shirt painted over and over again, made stiff by mixing elmers glue and water to paint it. Hope you all like.](userimages/customs/34500/34060-1.jpg) Spawn Spawnby JohnnyfraggerHello all,
Have not posted in a while, wanted to do this a long time ago, I know there are a million, but wanted my own :) recipe is same as all other...8 comments |
![[Evel Knievel] Hello all, If any of you ever had an evel knievel motorcycle when you were a kid, this is for you:)I wanted to get this done for the rider contest but got sick. I dismantled and reworked wolverines cycle and sculpted seat and gas tank. Used Marvel legends Xorn and sculpted the collar and bell bottoms, used his helmet but sanded smooth and sculpted over it. cape is a shortened scarlet witch cape. Everything is hand painted except for the decal on the front of the motorcycle. Yes the little stars really sucked.](userimages/customs/25500/25355-1.jpg) Evel Knievel Miscby JohnnyfraggerHello all, If any of you ever had an evel knievel motorcycle when you were a kid, this is for you:)I wanted to get this done for the rider contest but...1 comments | ![[Padme] Hello All, I always hated the Padme figure that came out with the torn white outfit, so I decided to make my own. I resculpted and hand painted her from top to bottom and made a custom base with sculpey and sand. hope you like it:)I hope to make a Marvel Legends scale Padme sometime in the future.](userimages/customs/23500/23090-1.jpg) Padme Star Warsby JohnnyfraggerHello All, I always hated the Padme figure that came out with the torn white outfit, so I decided to make my own. I resculpted and hand painted her fr...0 comments |
![[Troy Polamalu NFL Pittsburgh Steelers] Hello all, I am a huge fan of the Steelers, so I had to make a custom of our own Super hero on DEFENSE!!! Here I used a Marvel Legends Wolverine as the base figure and ML Bullseye arms. I used a McFarlane Priest Holmes head, then sculpted and hand painted everything but the helmet logo. The hair is from a female fodder figure I had laying around. I wropped it around an aluminum rod and used a blow dryer to curl. I encourage everyone to check out my Jerrome Bettis figure, if you like this one. I also have done a Hines Ward which I will post in a few days:) Also Check out my Tomb Raider figure which got posted without pics at first. Any tips for the helmet logo would be appreciated:)](userimages/customs/23500/23089-1.jpg) Troy Polamalu NFL Pittsburgh Steelers NFLby JohnnyfraggerHello all, I am a huge fan of the Steelers, so I had to make a custom of our own Super hero on DEFENSE!!! Here I used a Marvel Legends Wolverine as th...3 comments | ![[Death Dealer] Always loved Frank Frazetta's art, so wanted to do a death dealer figure. The armor is a mixture of sculpted and armor from a ML Loki figure. The helm is a mixture of LOTR helm and horns from loki figure. The axe was hand sculpted with a mixture of fix-it sculpt and oaty plumber's putty.](userimages/customs/23000/22796-1.jpg) Death Dealer Fantasyby JohnnyfraggerAlways loved Frank Frazetta's art, so wanted to do a death dealer figure. The armor is a mixture of sculpted and armor from a ML Loki figure. The helm...1 comments |
![[Drizzt the Dark Elf] For any fans of RA Salvatore's dark elf series here is your main character. I sculpted all the hair, and hand sculpted the sword hilts. I have the replica swords of twinkle and icing death so I tried to make them as authentic as possible. This is one of my favorite customs.](userimages/customs/23000/22795-1.jpg) Drizzt the Dark Elf Fantasyby JohnnyfraggerFor any fans of RA Salvatore's dark elf series here is your main character. I sculpted all the hair, and hand sculpted the sword hilts. I have the rep...1 comments | ![[Emma Frost White Queen] Pretty much Psylocke with storm legs and arms. sculpted hair and chest and clothes.](userimages/customs/23000/22791-1.jpg) Emma Frost White Queen |
![[UPDATE -Lara Croft Tomb Raider with Motorcycle] Hello all,
Updating my Tomb raider figure with a motorcycle. Used a power rangers cycle and re worked it. Also included some before pics of Laura. Used ML wasp head and ponytail from witchblade figure. Her hair that hangs in eyes is actually little rubber strips that were painted, this way I find I don't have to worry about breaking them. Had the hardest time with painting the flesh! anybody know any tips please help! Lara has real leather holsters for her guns, and a removable t-shirt:) yes they are real and they are spectacular:) the guns were made by making a mold of a punisher gun and then using a mixture of fix-it sculpt and Oaty plumbers putty.](userimages/customs/23000/22790-1.jpg) UPDATE -Lara Croft Tomb Raider with Motorcycle Tomb Raiderby JohnnyfraggerHello all,
Updating my Tomb raider figure with a motorcycle. Used a power rangers cycle and re worked it. Also included some before pics of Laura. Us...2 comments | ![[Night Elf Death Knight] Created with ml psylocke and mystique head, armor custom made and some parts from a samuri spawn figure. Sword custom from scrap materials](userimages/customs/23000/22642-1.jpg) Night Elf Death Knight |
![[Jerrome Bettis Pittsburgh Steelers] Hand sculpted all pads and hand painted everything but helmet logo. The head and hands were from Jamal Lewis figure. I took a very long time to complete this figure, and as the Steelers are my favorite team I would never part with this one. I also did a Hines ward Custom.](userimages/customs/9000/8522-1.jpg) Jerrome Bettis Pittsburgh Steelers NFLby JohnnyfraggerHand sculpted all pads and hand painted everything but helmet logo. The head and hands were from Jamal Lewis figure. I took a very long time to comple...3 comments | ![[Darth Maul] This is a Darth Maul custom, I created from a ML Bullseye figure. I sanded and hand painted everything. I made the cape from some scrap fabric and the belt is made from real leather. The lightsaber is hand sculpted hilt with a resin type plastic blade/ dowel I found at a hobby store. the horns were plastic claws from a wolverine figure I drilled and glued in.](userimages/customs/9000/8521-1.jpg) Darth Maul Star Warsby JohnnyfraggerThis is a Darth Maul custom, I created from a ML Bullseye figure. I sanded and hand painted everything. I made the cape from some scrap fabric and the...4 comments |
![[Taarna] This is a Taarna figure from the first Heavy Metal movie. I used a Marvel Legends Psylocke figure and Emma Frosts Head. She does have a removable top, I use Fix-it sculpt for the chest area and hair and Oaty plumbers epoxy for the removable top. It generally takes me months to complete my figures, but I do not work on them daily. I usually do not sell any of my figures, because I put so much work in them I do not think I will get what I value them to be. I have only been customizing fo about a year and a half. I got into it because I had a house fire and had some figures smoke damage, but I did not want to throw them away.](userimages/customs/9000/8520-1.jpg) Taarna Animeby JohnnyfraggerThis is a Taarna figure from the first Heavy Metal movie. I used a Marvel Legends Psylocke figure and Emma Frosts Head. She does have a removable top,...1 comments | |
|