![[Halo Clix Blue & White Mark VI] Fully repainted besides the gun & head visor. The black areas are even fully repainted. I love the work I done on this I took my time & used a toothpick of power to do the really hard to paint areas.
I also painted the color of the base to super rare color =)](userimages/customs/10500/10475-1.jpg) Halo Clix Blue & White Mark VI Haloby DanteFully repainted besides the gun & head visor. The black areas are even fully repainted. I love the work I done on this I took my time & used a...0 comments | ![[Master Chief Metallic] Everything repainted but the visor & knee/back of foot lights. I did slightly tweak them but nothing big on those parts. This looks different shades depending on the lighting.
All Metallic paints used & no animals harmed during the painting process. =)](userimages/customs/10500/10455-1.jpg) Master Chief Metallic Haloby DanteEverything repainted but the visor & knee/back of foot lights. I did slightly tweak them but nothing big on those parts. This looks different shad...1 comments |
![[Pinhead Extreme blood variant.] Well I repainted everything but the dead flesh. I did add different washes over the dead flesh so I guess I repainted everything..
Base coat is Black Metallic to have it look like wet bloody/dirty leather from the underworld. (I got to down I think)
I added a xmas red blood wash at spots I think it would be intense at. The thighs get a lot of touching same with the arms. The side/back splatter is just splatter from ripping out the heart. Since he can not reach that area well its pretty much not smeared much.
I then went & added some black wash to add drying blood with dirt look. The underworld is never clean! =)
I then went around & did a trick to do some splatter in areas I only wanted it done on. Nope I did not use a airbrush & paper with holes. I used a brush then blew hard to hit my areas. OMG I was light headed about 5 times...
After I let the splatter dry a bit I went & added a dry metallic black wash to mix it in with the rest. I did a even lighter wash on t](userimages/customs/10500/10387-1.jpg) Pinhead Extreme blood variant. Hellraiserby DanteWell I repainted everything but the dead flesh. I did add different washes over the dead flesh so I guess I repainted everything..
Base coat is Black...17 comments | ![[Smith VS Neo] Everything but the skin was painted. It really looked outdated until I repainted it.](userimages/customs/10500/10386-1.jpg) Smith VS Neo Matrixby DanteEverything but the skin was painted. It really looked outdated until I repainted it....1 comments |
![[Halo RL-945 Blue EOD] RL-945 Upgrade Gear was made for Spartans in the battlefield to repair or lift heavy equipment when needed. The Gear lets the Spartan pickup more weight but it also slows them down. A Squad is always assigned to each Spartan Wearing a RL-945 Gear to protect him at all costs. In case he needs to he can fight with his Canon Rifle. Thanks to this New Gear he can use such a weapon & can handle the intense kickback it gives.
Gear Information.
+ Can lift heavy objects.
+ Can use The Canon Rifle.
+ Extra armor
- Slow movement which is why a squad is usually by his side for protection.
This is something I been tinkering with on the side for about a week now for auctioning off. I added a sweet rifle. I repainted it to match the Gear color scheme as well. I added some grease stains wash to them also. This Gear even lets you move as you pose the figure! It has a rotating elbow & knee Joints! I Did many different poses with this thing. The Gear snaps on & stays on just like if t](userimages/customs/10500/10374-1.jpg) Halo RL-945 Blue EOD Haloby DanteRL-945 Upgrade Gear was made for Spartans in the battlefield to repair or lift heavy equipment when needed. The Gear lets the Spartan pickup more weig...2 comments | ![[Halo 3 Robo EOD] I did this one to sell so I did a theme everyone likes.... RoboCop! I trimmed the nose between the eyes so it looks better. I then painted him with metallic paint I mixed up. I repainted the entire figure inside & out. The chest plate is fully painted inside with the pegs protected. The paint will not scratch or scrape off. I wanted a rubber look that looks greasy so I used metallic black for the joints & black areas. I wanted to do something new for auction selling so I made this. After I was done I said to myself I got to take this further! So this one is going & I will do another for me. I will modify the EOD chest plate so it looks more shape of robocop. I am trying to find a jetpack that I can modify to use on him as well.
The gun I found in a lot I bought years ago. I did a nice repaint for that as well. I think it looks close enough to robocops gun. This is a themed robocop look so it does not have to be perfect replicas.
Anyways I hope you enjoy this puppy. I am](userimages/customs/10500/10262-1.jpg) Halo 3 Robo EOD Haloby DanteI did this one to sell so I did a theme everyone likes.... RoboCop! I trimmed the nose between the eyes so it looks better. I then painted him with me...3 comments |
![[Silver w/ Blue Mark VI] All metallic paints used besides the stripes are cobalt flat.
Repainted everything but visor/lights.
This is a older one I did but it is still a nice one.](userimages/customs/10500/10194-1.jpg) Silver w/ Blue Mark VI Haloby DanteAll metallic paints used besides the stripes are cobalt flat.
Repainted everything but visor/lights.
This is a older one I did but it is still a nic...0 comments | ![[Silver M Mark VI] Another one of my first customs I did. Everything repainted but the visor & light areas on knee area.
Metallic Gunmetal Base color.
Metallic Purple secondary.
Metallic Black Joint areas & misc areas.
Metallic Black Wash.
Not bad for being one of my first 10 I done.
New camera so i added new updated photos.](userimages/customs/10500/10181-1.jpg) Silver M Mark VI Haloby DanteAnother one of my first customs I did. Everything repainted but the visor & light areas on knee area.
Metallic Gunmetal Base color.
Metallic Purp...0 comments |
![[Orange Mark VI] This custom took me a long time. The paint was very watery. It turned out amazing.
Some detailing used metallic paints.
Base colors all flat.
Used metallic black paint for the black joint areas.
This is also one of my first set of customs for this line I did.](userimages/customs/10500/10180-1.jpg) Orange Mark VI Haloby DanteThis custom took me a long time. The paint was very watery. It turned out amazing.
Some detailing used metallic paints.
Base colors all flat.
Used m...0 comments | ![[Silver M Mark VI] Well this is a oldie but goodie. This was one of my first 5 customs I did for halo. It sure does bring back memories of the first time I used metallic paints.
Silver Metallic with a Black Metallic wash. Black joints Black Metallic as well.](userimages/customs/10500/10176-1.jpg) Silver M Mark VI Haloby DanteWell this is a oldie but goodie. This was one of my first 5 customs I did for halo. It sure does bring back memories of the first time I used metallic...2 comments |
![[Green & Black Camo Mark VI] I did this awhile ago. I wanted to try doing my first camo type custom. I repainted everything but the gold visor. I used all metallic paints. I made sure stuff aligned up right when you put things on him. Example would be the shoulder pads. I painted them so the pattern connects with the figure base camo patterns. I did this to the chest plate as well. I even went & redone the weapon with camo patterns. I was going to add some clothing material wrapped around it but never did.
I free handed the camo paterns. I like to know a nice trick besides using a air brush method for doing them.
Anyways I spent more time on this then my other customs. Was it worth it? As everything you do the more you do it the better you get. But for my 1st attempt I can be proud of what I done.](userimages/customs/10500/10175-1.jpg) Green & Black Camo Mark VI Haloby DanteI did this awhile ago. I wanted to try doing my first camo type custom. I repainted everything but the gold visor. I used all metallic paints. I made ...3 comments | ![[Blue EOD White Secondary] I finally found a match that is close to mcfarlanes blue they used. This was a Green EOD I started with. Everything was repainted & details added. I added a real dirty look to this one. He comes with a extra set of white secondary shoulder pads. I been making customs off & on so you can swap parts with the matching secondary color. Something I have not seen others do but I bet they will now. =>
I hope you all enjoy it.](userimages/customs/10500/10174-1.jpg) Blue EOD White Secondary Haloby DanteI finally found a match that is close to mcfarlanes blue they used. This was a Green EOD I started with. Everything was repainted & details added....4 comments |
![[Metallic Gold Scout] Quick breakdown.
Base Gold Metallic.
Secondary Sapphire Metallic.
Black joint areas Black Metallic.
Added my usual detailing all around the figure.
Added a nice wash after my first seal.
Team Stripes hand painted by free hand as usual.
As always everything was painted even the inside of the chest plate & hidden crotch areas. Many people do not notice the area between the legs at all or to late. Anyways I hope you all enjoy it. I have around 80 I done for halo 3 line. I will slowly add them when I get time. I have to take photos then get them up here.](userimages/customs/10500/10164-1.jpg) Metallic Gold Scout Haloby DanteQuick breakdown.
Base Gold Metallic.
Secondary Sapphire Metallic.
Black joint areas Black Metallic.
Added my usual detailing all around the figure.
A...2 comments | ![[Metallic Chieftain] What I done.
Chainmail Repainted Metallic Gunmetal FA.
All armor repainted Metallic Black.
Added some other stuff which I forget. Simple repaint the rest looked good retail so I left it. Overall this looks better then the prototype photos I think.
I am buying a new camera 1.4MP just is not good enough.](userimages/customs/10500/10163-1.jpg) Metallic Chieftain Haloby DanteWhat I done.
Chainmail Repainted Metallic Gunmetal FA.
All armor repainted Metallic Black.
Added some other stuff which I forget. Simple repaint the...3 comments |
![[Pink Mark VI] Paint used
Pink Unknown Shade
Silver Metallic for the breathing area on both sides of the helmet and along the ear area I did some silver. I put some silver on the chest battle damage area as well.
White Flat for Stripes.
Black Metallic for all black areas and wash at the end.
Gunmetal Metallic For Boot Toe area and armor clip areas. I put a little of this to the battle damage area for base coat. Then I put some silver metallic on top. This ads a more real effect of damaged armor.
I forgot which of the pinks that I bought to used on this. The two first ones I tried looked ugly. The 3rd pink shade I tried is what you see now. The Pink paint I used was a nightmare! I did so many coats it took me a month of on and off painting. I would not use this paint again for something like this. It came out real nice but not worth the work. I did not like the Pink McFarlane made so I did mine.](userimages/customs/10000/9983-1.jpg) Pink Mark VI Haloby DantePaint used
Pink Unknown Shade
Silver Metallic for the breathing area on both sides of the helmet and along the ear area I did some silver. I put som...3 comments | ![[Gold Metallic Mark VI With Blue Metallic Secondary] Paint used
Gold Metallic
Blue Metallic
Black Metallic
GunMetal Metallic
White Flat for stripes.
I again repainted everything but the Gold Visor I left untouched. I always freehand my stripes if people are wondering. I learned to do them well doing my sports customs over the years. The foot toe area I always use Gunmetal Metallic then a wash later. Again all areas painted under armor inside body everything. You would be amazed how some angle shots show unpainted stuff. So I learned a long time ago just to do it right. The toothpick is your friend I always use it for hard to reach areas. Like for example the breathing area on side of the helmet I toothpick that Metallic Black. Like I said before I really repaint everything. I repaint even the black areas around the gold visor. I know they are not a must. They really do bring out a extra depth in the final project.](userimages/customs/10000/9982-1.jpg) Gold Metallic Mark VI With Blue Metallic Secondary Haloby DantePaint used
Gold Metallic
Blue Metallic
Black Metallic
GunMetal Metallic
White Flat for stripes.
I again repainted everything but the Gold Visor I le...2 comments |
![[EVA Blue Metallic With Gold Secondary] Paints used
Blue Metallic
Gold Metallic
White Flat for the stipes
Black Metallic for all the black areas.
Gunmetal Metallic for detailing some armor clip things.
This is one of my favorite EVA customs to date. Fully painted no missing spots at all even in hidden areas is painted. I totally repainted this figure besides the Gold Visor which I left alone.
I added a armor latch detailing along with other small details. I added a nice wash with black metallic paint. The gun hand is modded so it is just like the Master Chief V2 hand. I made sure no spots was left unpainted. I toothpicked hard to reach areas. I do this on all my customs. Nothing is to small to leave undone.](userimages/customs/10000/9981-1.jpg) EVA Blue Metallic With Gold Secondary Haloby DantePaints used
Blue Metallic
Gold Metallic
White Flat for the stipes
Black Metallic for all the black areas.
Gunmetal Metallic for detailing some armor ...0 comments | ![[Mark VI Yellow With Blue Sec] Yellow Flat
Cobalt Flat
Black Metallic for black areas
Simple repaint really. This is a few months old now. If you seen my other repaints of this line you know what to expect. I painted until I seen no trace of the former paint. I painted every area even the well hidden areas. Aka Under chest plate/Shoulder Pads/Inside body. You would be amazed how some angles show those hidden areas. So I made sure I did it right. I added little detailing here and there as well.](userimages/customs/10000/9979-1.jpg) Mark VI Yellow With Blue Sec Haloby DanteYellow Flat
Cobalt Flat
Black Metallic for black areas
Simple repaint really. This is a few months old now. If you seen my other repaints of this lin...0 comments |
![[Cyan Metallic Mark VI] Straight up repaint of a McFarlane Halo 3 Mark VI figure.
Used a mixture to get this Cyan Metallic type shade.
Used Gold Metallic for the shoulder pads and head stripe.
Used Black Metallic for black joint areas.
I repainted everything on this figure except the gold visor.
There is no trace of the original paint anywhere. I feel dirty if I leave a hidden area unpainted.
As always once I add a first seal I go and add a wash. I then go around adding small details to the figures as usual. It is all about the small details I think. I even repaint all the joints with Metallic black so it has a rubber oiled up look to it. I even paint the bottom of the feet! There is just to many things I do to each repaint to list.
I will be adding more photos as I get them done. I am in the process of moving my room around.
I just added extra photos. Sorry some are not as crisp as the others.](userimages/customs/10000/9963-1.jpg) Cyan Metallic Mark VI Haloby DanteStraight up repaint of a McFarlane Halo 3 Mark VI figure.
Used a mixture to get this Cyan Metallic type shade.
Used Gold Metallic for the shoulder pa...2 comments | ![[Bronze Metallic Mark VI] I used a Red Mark VI for this repaint.
Colors used.
Bronze Metallic By FolkArt.
Blue Metallic By FolkArt.
Cobalt Flat By Apple Barrel for the stripes.
Black Metallic By FolkArt for the black areas of course.
Simple repaint. I repainted the entire figure besides the Gold Visor.
The figure is fully painted no spots unfinished. I even paint the hidden areas. Example would be inside the torso and inside chest plate. I also paint the inside of the shoulder pads. Simply put everything is fully painted. I paint until I see no more of the former paint color. I add a few extra coats to make sure. After I seal the figure I added a nice black metallic wash to it.](userimages/customs/10000/9962-1.jpg) Bronze Metallic Mark VI Haloby DanteI used a Red Mark VI for this repaint.
Colors used.
Bronze Metallic By FolkArt.
Blue Metallic By FolkArt.
Cobalt Flat By Apple Barrel for the stripe...1 comments |
![[ODST #975] Basic Mcfarlane Halo 3 figure with.
ODST Exclusive Head
CQB Chest Plate
Scout Shoulder Pads
I believe I used flat buttercup paint for the yellow.
Secondary I used Cobalt Flat.
Black areas repainted with Metallic Black.
I repainted the entire figure inside and out except for the gold visor. Everything else was fully repainted. I added a wash when I was finished. I take pride in making sure my customs are fully painted. I hope it shows here.
New photos added you should see the detailing i added better now.](userimages/customs/10000/9961-1.jpg) ODST #975 Haloby DanteBasic Mcfarlane Halo 3 figure with.
ODST Exclusive Head
CQB Chest Plate
Scout Shoulder Pads
I believe I used flat buttercup paint for the yellow.
Se...0 comments | |
|