![[X-Cutioner] Hey everyone. Today we bring you everybody's favorite chainmailed anti-hero/villain. Actually, he was only around for a few issues, but I have always loved the look of this guy.
He was a lot of work. He started out as a SMC Mad Jack with the head and electronics removed. Most of the new head was sculpted. The face was stolen from a pre-legends toy. Hands came from a LCBH Wraal. Cloth on front and back were cut from LCBH Wraal cape. Pouches, gauntlets, shin guards, knee pads, hands, helmet, etc were all sculpted. Sheild is from a MOTU He-man. Spears are from all over (DCD Wonderwoman, ML Valkyrie, etc.) Everything else is sculpted or random fodder.
Hope you guys like. Remember, comments always welcome.](userimages/customs/30000/29915-1.jpg) X-Cutioner Marvel Legendsby BurchCustomsHey everyone. Today we bring you everybody's favorite chainmailed anti-hero/villain. Actually, he was only around for a few issues, but I have alway...2 comments | ![[Titanium Man] Long-time enemy to Iron Man, the Titanium Man armor has been graced with quite a few lousy toy adaptations. I was mostly happy with the sculpt for the Iron Man 2 6" figure, but like the Iron Man 1 version, it was just too small. Sought to remedy that with this figure.
Started with a ML Thor-Buster Iron Man and scultped just about all the details using the 3.75" Titanium Man for inspiration. Sculpted the head over a spare LCBH Wraal. The whole thing was a lot of work, but seeing how he towers over Iron Man makes it worth it.
Hope you enjoy. Comments always welcome.](userimages/customs/30000/29873-1.jpg) Titanium Man Marvel Legendsby BurchCustomsLong-time enemy to Iron Man, the Titanium Man armor has been graced with quite a few lousy toy adaptations. I was mostly happy with the sculpt for th...2 comments |
![[Ares] Hello everyone,
Back from a long, long hiatus.
Like many, I was very disappointed when I was not able to get the full ML Ares Build-a-Figure. Finally gave up on getting the rest of the pieces and decided to finish the figure.
Chest up is is the Ares BAF. Chest down in the ML Lord of Asgard Thor. Lots of shaving and sculpting was needed, especially on the boots.
While we were at it, we decided to make a custom head with the classic mohawk using an extra BAF head. Head was shaved down and hair and beard are hot glue.
Axe is from LoA Thor. Other weapons are BAF official release.
Hope you guys like. Comments always welcome.](userimages/customs/30000/29872-1.jpg) Ares Marvel Legendsby BurchCustomsHello everyone,
Back from a long, long hiatus.
Like many, I was very disappointed when I was not able to get the full ML Ares Build-a-Figure. Fin...1 comments | ![[Ultimate Rhino] I have always loved the design of the Ultimate Spider-Man version of Rhino, but when ToyBiz released the figure I was horribly disappointed. His sculpt was passable, but his articulation was horrible and he was barely 6 inches tall. I had Spider-Man figures who were the same height. I always wanted a better version and this contest gave me the opportunity to finally get one.
Started with a SMC Buzzing Beetle. Removed the wings, head, and electronics and tooled him down quite a bit. Gave him the head of the original SMC Ultimate Rhino and built up the neck and horns with sculpey. Sculpted (with Mighty Putty) the chest, back, forearms, hands, knees, lower leg, feet, and a few other details. Carved pipes into his upper leg. Took the shoulder pads from the original SMC Ultimate Rhino. Full paint.
Now I have an Ultimate Rhino who dwarfs Spidey...like he should.
Background is an original drawing by a local artist.
Enjoy](userimages/customs/23500/23329-1.jpg) Ultimate Rhino Marvel Legendsby BurchCustomsI have always loved the design of the Ultimate Spider-Man version of Rhino, but when ToyBiz released the figure I was horribly disappointed. His scul...3 comments |
![[Arachne] Was never able to find the official Spider-Woman variant, so we made one. Started with a ML Series 15 Wasp, took the head from ML Series 15 Spider-Woman and hair from ML Series 14 Psylocke. Full paint.](userimages/customs/21000/20792-1.jpg) Arachne Marvel Legendsby BurchCustomsWas never able to find the official Spider-Woman variant, so we made one. Started with a ML Series 15 Wasp, took the head from ML Series 15 Spider-Wo...1 comments | ![[Gwen Stacy] Been far too long since I have posted anything, and considering the fact that I have a backlog nearing 50, I should probably get back to it.
Might as well continue with Spidey's lady friends.
Gwen Stacy started as a Spider-Man Movie Mary Jane. Head is from HML Two-Pack Elektra. The hair is hot glue, and the botoom of the shirt is shrink tubing. Full paint and that is it.](userimages/customs/21000/20791-1.jpg) Gwen Stacy Marvel Legendsby BurchCustomsBeen far too long since I have posted anything, and considering the fact that I have a backlog nearing 50, I should probably get back to it.
Might as...1 comments |
![[Mary Jane Watson] Base: Heavily modified Buffy Faith figure.
Head: ML Wasp
Hair: White Queen, Modified with hot glue](userimages/customs/19000/18946-1.jpg) Mary Jane Watson | ![[Mr. Rose] Son and enemy of the Kingpin, Mr. Rose.
Base: Unknown Buffy Figure
Head: HML Two-Pack WWII Captain America (heavily modified)
Hands: HML Two-Pack Ult. Nick Fury
Guns from the fodder box.](userimages/customs/19000/18945-1.jpg) Mr. Rose Marvel Legendsby BurchCustomsSon and enemy of the Kingpin, Mr. Rose.
Base: Unknown Buffy Figure
Head: HML Two-Pack WWII Captain America (heavily modified)
Hands: HML Two-Pack Ult...0 comments |
![[Negative Zone Spider-Man] Had an extra ML Series 10 FA Spidey sitting around. Just a simple repaint.](userimages/customs/18500/18181-1.jpg) Negative Zone Spider-Man | ![[The Rose] Richard Fisk is the son of The Kingpin. He hated his father. Not wanting to face his father head on, he took the guise of The Rose, using the new persona to throw a wrench in his father's works.
Recipe:
Base - Buffy figure
Head - HML Two Pack WWII Captain America
Hands - HML Two Pack Ultimate Nick Fury](userimages/customs/18500/18180-1.jpg) The Rose Marvel Legendsby BurchCustomsRichard Fisk is the son of The Kingpin. He hated his father. Not wanting to face his father head on, he took the guise of The Rose, using the new pe...1 comments |
![[Bob, Agent of HYDRA] The last figure in my current Agency X kick. Just had to do a Bob, Agent of HYDRA.
May tackle Udon Taskmaster sometime.... but not now.
Anyway...
Recipe:
Base - LCBH Madman
Head - ML Mr. Fantastic (heavily modified) and sculpey
Belts - ML Two-Pack Ultimate Nick Fury, some fodder pouches, and some suclpted pouches.
Hands - HML Series 3 Cyclops
Guitar (why not....) - random clearance wrestler.
As for the last picture..... I was bored and it seemed to fit with Agency X. The other guitars are custom painted dollar store guitar hero guitars. The drums were......let us say, "spur of the moment."
Enjoy.](userimages/customs/18500/18030-1.jpg) Bob, Agent of HYDRA Marvel Legendsby BurchCustomsThe last figure in my current Agency X kick. Just had to do a Bob, Agent of HYDRA.
May tackle Udon Taskmaster sometime.... but not now.
Anyway.....5 comments | ![[Edgar Allan Poe] Custom #100!!!
For my 100th posted custom, wanted something special. Edgar allan poe has always been my favorite author, and he is a personal inspiration in my career (not my life.....).
So here he is.
Recipe:
Base - batman mm gotham city thug
Head - random wrestler
Hands - buffy figure
Hair and moustache - sculpey
Raven - wire and sculpey
Hope you enjoy and thanks for sticking with me for 100 customs!](userimages/customs/18500/18020-1.jpg) Edgar Allan Poe Miscby BurchCustomsCustom #100!!!
For my 100th posted custom, wanted something special. Edgar allan poe has always been my favorite author, and he is a personal inspir...11 comments |
![[Weasel] Continuing on with Agency X, today we bring you Weasel.
Recipe:
Base - ML Series 6 Movie Punisher
Head - ML X-Men Legends Box Set Gambit with hot glue hair.
Glasses - Wire and solder and all the flesh charred from my brother's fingers while working to make them right.
Arms - Random wrestler with shrink tubing for sleeves
Shirt - Buffy figure.
Full paint](userimages/customs/18500/18017-1.jpg) Weasel Marvel Legendsby BurchCustomsContinuing on with Agency X, today we bring you Weasel.
Recipe:
Base - ML Series 6 Movie Punisher
Head - ML X-Men Legends Box Set Gambit with hot glu...5 comments | ![[Agent X] Yet another Agency X staple: Agent X.
Recipe:
Base - HML Series 3 Xorn
Arms - HML Two-pack Ultimate Nick Fury
Lower Legs - (I think) HML Series 2 Wolverine
Head - HML Two-Pack extra Ronin head (hevily modified)
Goggles - DCUC Booster Gold
Everything else is either sculpey or rubberbands.](userimages/customs/18000/17991-1.jpg) Agent X Marvel Legendsby BurchCustomsYet another Agency X staple: Agent X.
Recipe:
Base - HML Series 3 Xorn
Arms - HML Two-pack Ultimate Nick Fury
Lower Legs - (I think) HML Series 2 Wol...2 comments |
![[Sandi] Continuing on with Agency X, today we bring you....
the secretary?
Yes, Sandi the secretary...
Recipe:
Base - HML Series 3 Rachel Summers
Head - HML FF Series Invisible Woman
Hands - Buffy figure
Full paint](userimages/customs/18000/17990-1.jpg) Sandi Marvel Legendsby BurchCustomsContinuing on with Agency X, today we bring you....
the secretary?
Yes, Sandi the secretary...
Recipe:
Base - HML Series 3 Rachel Summers
Head - HM...2 comments | ![[Outlaw] Recipe:
Base - DCSH Supergirl
Arms - Buffy figure
Hat - GRM Scarecrow
Hair - Hot glue with the Braid from a LOTR Gimli
Skirt - Shrink Tubing
Belt - Shrink tubing, Rubberband, and Vinyl
Wrist bands - Shrink Tubing
Shirt - Sculpey
Guns - from fodder bin.](userimages/customs/18000/17973-1.jpg) Outlaw Marvel Legendsby BurchCustomsRecipe:
Base - DCSH Supergirl
Arms - Buffy figure
Hat - GRM Scarecrow
Hair - Hot glue with the Braid from a LOTR Gimli
Skirt - Shrink Tubing
Belt - Sh...4 comments |
![[John Preston: Grammaton Cleric from Equilibrium] After World War III nearly destroys the human race, Earth's remaining leaders decide that humanity will not survive another. The scraps of humanity reunite and decide to outlaw that which they believe leads to war. Emotion.
Using drugs and a strong police force the government nearly wiped out all human emotion everywhere, except for amongst the rebels. Extinguishing the resistance is the job of the Grammaton Clerics, especially its highest ranked member, John Preston.
There is only one problem. John Preston is starting to feel....
Recipe:
Body - Buffy Xander figure
Head - MM Batman unmasked recast (thanks blaynescott)
Hands - FFM Mr. Fantastic
Sleeves and chest - Sculpey
Coat - Vinyl and shrink tubing
Buttons - Craft store jewels
Guns - modified 1911s from HML Two Pack WWII Captain America](userimages/customs/18000/17972-1.jpg) John Preston: Grammaton Cleric from Equilibrium Miscby BurchCustomsAfter World War III nearly destroys the human race, Earth's remaining leaders decide that humanity will not survive another. The scraps of humanity r...3 comments | ![[Denton Van Zan from Reign of Fire] Denton Van Zan is the leader of a group of American Military Volunteers who have arrived in England looking for a way to destroy the dragon population for good.
Having studied the habits and physiology of the dragons, Van Zan and his team formulate a plan with only one problem. They need more soldiers. Lucky for them, they found a castle of potential conscripts.
Can they convince Quinn to put his people in danger in order to save the world?
Recipe:
Torso - LCBH Conan
Legs - HML Two-Pack Ult. Nick Fury (modified)
Forearms - Random Wrestling figure
Head - Random Wrestling Figure
Axe - Korean Chopstick with plummers putty and electrical tape.](userimages/customs/18000/17968-1.jpg) Denton Van Zan from Reign of Fire Miscby BurchCustomsDenton Van Zan is the leader of a group of American Military Volunteers who have arrived in England looking for a way to destroy the dragon population...6 comments |
![[Quinn Abercrombie from Reign of Fire] In 2008, something awoke under the streets of London. Twelve years later, mankind is under seige by dragons who are turning the whole world to ash.
Quinn Abercrombie barely escaped with his life when the first dragon arose when he was a boy. As a man, he is the leader of a small community of survivors who are holed up in an old castle.
Life is hard there, but at least the people are safe. That is, at least until Denton Van Zan and his military unit show up. They bring firepower, and promise protection but their presence threatens to lead the dragons to the caslte.
Quinn, as the leader, has to make a choice. Defending his small community, or going on the offensive to end the dragon population permanently.
Recipe:
Torso - HML Ult. Nick Fury covered with sculpey
Legs - Buffy Giles? figure
Arms - HML Ult. Nick Fury
Hands - from fodder bin
Jacket - Spider-Man 2 Doc Ock.
Head - Custom cast Christian Bale T4 head from Blaynescott with hot glue hair and beard.
Rifle - HML Kazar Rifle](userimages/customs/18000/17966-1.jpg) Quinn Abercrombie from Reign of Fire Miscby BurchCustomsIn 2008, something awoke under the streets of London. Twelve years later, mankind is under seige by dragons who are turning the whole world to ash.
...1 comments | ![[Tony Stark] Pretty close recipe to everyone elses. Used a Joker Thug with a Doctor Strange head which was modified heavily. Hot glue hair. Hands from (I think) a Battlestar Galactica figure. Paint.](userimages/customs/17000/16573-1.jpg) Tony Stark Marvel Legendsby BurchCustomsPretty close recipe to everyone elses. Used a Joker Thug with a Doctor Strange head which was modified heavily. Hot glue hair. Hands from (I think)...1 comments |
![[Iron Man - First Appearance Gold] Got sick of looking for the official chase figure, so decided to make my own.
Fairly simple custom, but not as simple as it looks. Started with a ML Series 14 First Appearance Iron Man. Full paint. Took forever to find the right gold for him.
Also since he is going in my Hall of Armor didn't want the face showing through the eye holes. Cut the full face off and painted the inside lack before gluing the mask.
Simple but effective custom.](userimages/customs/17000/16572-1.jpg) Iron Man - First Appearance Gold Marvel Legendsby BurchCustomsGot sick of looking for the official chase figure, so decided to make my own.
Fairly simple custom, but not as simple as it looks. Started with a M...2 comments | ![[Thunderstrike V2] The jacket on my original Thunderstrike never quite cured, so decided to redo it and to fix a few more details. Started with a Lord of Asgard Thor from Hasbro ML Series 2. The head is from a wrestling figure with hot glue hair with a ML Giant Man Series AoA Sabretooth ponytail and hot glue beard (trimmed from the original custom). A few small details were altered on the body. Boots were altered using shrink tubing and sculpey. Cloth vest from my fodder bin. Disks are craft disks (two removed from original custom). Belt buckle was altered to show a "T" instead of Thor's hammer. Full paint.
Also decided to make Thunderstrike the mace to go with Thunderstrike, the man. Used the handle from an LCBH Conan. Took off the blades and built up the head with Mighty Putty.](userimages/customs/17000/16537-1.jpg) Thunderstrike V2 Marvel Legendsby BurchCustomsThe jacket on my original Thunderstrike never quite cured, so decided to redo it and to fix a few more details. Started with a Lord of Asgard Thor fr...5 comments |
![[Captain Britain V2] By request, another Captain Britain. Pretty close to the first, but used sculpt for details. Started with a HML Fing Fang Foom Series Samson figure. Shaved off the top of the boots and the bumps on the belt. Added Cap Britatins Head from the ML Giant Man series. Used Aves Apoxie Sculpt for details on the gloves and boots. Gave it a full paint job.](userimages/customs/17000/16536-1.jpg) Captain Britain V2 Marvel Legendsby BurchCustomsBy request, another Captain Britain. Pretty close to the first, but used sculpt for details. Started with a HML Fing Fang Foom Series Samson figure....9 comments | ![[Fantomex] Never read a comic with this guy, but thought he had a cool back story and look, so decided to make him.
Little background:
Fantomex, Jean-Phillipe, or Weapon XIII was a super soldier made using Sentinel Technology. It is he who reveals most of the secrets of the Weapon Plus program to the X-Men.
He is one of the most mysterious figures in the Marvel universe, mainly because he lies about just about everything. He speaks with a French accent, but he has revealed that it is because he finds it distracts and annoys people. Many of his powers are basically unknown. He claims many powers he has never actually shown in the comics. He has displayed a telepathic ability he refers to as "misdirection" and the ability to use auto-hypnosis. He also has superhuman agility and strength. He is an expert marksman, skilled hand-to-hand combatant, great liar, and a very good reader of body language.
Recipe:
Started with an HML Series 3 Astonishing Cyclops. Removed all the piping](userimages/customs/16500/16337-1.jpg) Fantomex Marvel Legendsby BurchCustomsNever read a comic with this guy, but thought he had a cool back story and look, so decided to make him.
Little background:
Fantomex, Jean-Phillipe, ...12 comments |
![[Thing] Had this guy sitting around for a while. I had an extra It figure with no idea what to use it for. I haven't liked any of the Things out so far, so just decided to use the It.
Dremmeled off the collar and sculpted it in a rock pattern. Heavily modified the face so he doesn't look so sad. Full paint.](userimages/customs/16500/16334-1.jpg) Thing Marvel Legendsby BurchCustomsHad this guy sitting around for a while. I had an extra It figure with no idea what to use it for. I haven't liked any of the Things out so far, so ...5 comments | ![[Micromax] My Excalibur roster is growing. Just made a big jump with Micromax.
Made from and Icons Human Torch with the flames removed and sculpey to fill in the holes. Head is from ML Icons Cyclops with the visor filled in with sculpey. Cuffs are shrink tubing. Full paint.](userimages/customs/16500/16126-1.jpg) Micromax Marvel Legendsby BurchCustomsMy Excalibur roster is growing. Just made a big jump with Micromax.
Made from and Icons Human Torch with the flames removed and sculpey to fill in t...0 comments |
![[Smart Hulk] Always loved the professor. Never got one from the hulk classics line, so we made one. Used a ml fo hulk figure with sculpey to straighten the leg of his pants. Used a heavily modified ml fff grey hulk head. Full paint.](userimages/customs/16500/16125-1.jpg) Smart Hulk Marvel Legendsby BurchCustomsAlways loved the professor. Never got one from the hulk classics line, so we made one. Used a ml fo hulk figure with sculpey to straighten the leg of ...2 comments | ![[Tomb Raider and Witchblade Statue] Lara - neca tomb raider. Light paint. Witchblade - neca tomb raider. Hair is hot glue. Pants, shirt, badge and most of her armor are sculpey. Some of the shoulder spikes are from the lcbh witchblade. Full paint. Base - 007 bond model kit base painted.](userimages/customs/16500/16044-1.jpg) Tomb Raider and Witchblade Statue Tomb Raiderby BurchCustomsLara - neca tomb raider. Light paint. Witchblade - neca tomb raider. Hair is hot glue. Pants, shirt, badge and most of her armor are sculpey. Some of ...3 comments |
![[Iron Man - Deep Sea Armor] Started with an iron man movie iron monger. Used pieces from a model car and some gundam figures. The bubble is from a vending machine bubble package. Used vinyl and fishing line for details.](userimages/customs/16500/16013-1.jpg) Iron Man - Deep Sea Armor Marvel Legendsby BurchCustomsStarted with an iron man movie iron monger. Used pieces from a model car and some gundam figures. The bubble is from a vending machine bubble package....6 comments | ![[Punisher - Loaded] Pretty easy one. Took the ml urban legends box set punisher, gave him a load of guns from corps figures, neca agent 47, and other places. Made straps and holsters from ribbon.](userimages/customs/16500/16012-1.jpg) Punisher - Loaded Marvel Legendsby BurchCustomsPretty easy one. Took the ml urban legends box set punisher, gave him a load of guns from corps figures, neca agent 47, and other places. Made straps ...1 comments |
|