![[Jinx] This is salvage project I just finished for a guy I work with. I'm not sure what all the parts are as my knowledge of joes isn't really all that good past the mid 80's.
Basically I tore the figure apart, stripped of all the old paint, dremeled all the joints,cleaned it up, repainted using a combination of citadel and P3 paints, sculpted the hair and blindfold and viola a brand spanking new jinx.
Thanks for looking and any comments or critiques are more than welcome.](userimages/customs/39000/38794-1.jpg) Jinx G.I. Joeby G1-ToysThis is salvage project I just finished for a guy I work with. I'm not sure what all the parts are as my knowledge of joes isn't really all that good ...7 comments | ![[Bebop and Rocksteady] I wanted to make a version of Bebop and Rocksteady that looked like they could give the turtles a serious run for their money.
Bebop is a re-sculpted Maestro figure with a modified head from some random animal figure.
Rocksteady is a re sculpted Marvel Select Hulk with a re sculpted head from a generic rhino toy.
This marks my first custom in about a year I hope you all enjoy.
Comments and critiques are welcome.
Thanks for looking.](userimages/customs/34500/34029-1.jpg) Bebop and Rocksteady |
![[MASK Raven with Calhoun Burns] The Raven is one of my all time favorite MASK vehicles so I just had to take a stab at breathing some new life into it.
I came across a die cast Corvette concept car that I thought would be appropriate seeing as how the original Raven was an 84 Corvette.
I have never customized a die cast car so it became quite the learning experience
I wanted the car to be able to transform as much as possible so I used the joints from some spare Transformers (sorry Cyclonus) I had lying around to make the flip up wheels.
For the reverse gull wing doors I ground out the frame and then epoxied piano hinge to the doors and frame.
The front end slides forward and rotates again thanks to the sacrifice of some brave transformers.
Calhoun was made mainly from a Rise of Cobra StormShadow.
I wanted his face to be unique so I re sculpted the head from the RoC Rex/doctor figure.
The sculpted the chest piece and a bit of the mask using aves fixit.
I tried to keep the color scheme as close to the original as I c](userimages/customs/22500/22090-1.jpg) MASK Raven with Calhoun Burns M.A.S.K.by G1-ToysThe Raven is one of my all time favorite MASK vehicles so I just had to take a stab at breathing some new life into it.
I came across a die cast Corve...4 comments | ![[T-Ray] T-Ray was one of the main villains from the '97 Deadpool comic series.
He trained as a mercenary and then later as a mystic assassin all to get revenge on Deadpool for murdering his wife.
I re sculpted Omega Reds face and hair then sculpted the belt using aves.
Sanded down the legs,knee pads and most the boots.
For the jacket I used the trench coat from a WWE undertaker figure.
The shoulder pads were made by cutting the basic shapes out of the unused arms from the jacket and then pushing bamboo skewers through the under side.
The pony tail and sword were from some WOW figure I had laying around in the fodder bin.
Thanks for looking and I welcome any comments or critiques.
This one has been sitting on my desk for about 5 months waiting to be finished so without further ado..](userimages/customs/21500/21013-1.jpg) T-Ray Marvel Legendsby G1-ToysT-Ray was one of the main villains from the '97 Deadpool comic series.
He trained as a mercenary and then later as a mystic assassin all to get reveng...3 comments |
![[John 'Soap' Mactavish] This was a fairly straight forward custom.
Re sculpted the head added a few pouches and painted the whole thing with citadel paints.
Thanks for looking.](userimages/customs/19500/19334-1.jpg) John 'Soap' Mactavish Modern Warfare 2by G1-ToysThis was a fairly straight forward custom.
Re sculpted the head added a few pouches and painted the whole thing with citadel paints.
Thanks for lookin...6 comments | ![[Josh Real Person Original Figure] I thought I would make a custom of a very good friend of mine who like me is an avid paintball player.
The mask and hair and knee pads were sculpted using fixit sculpt.
Modified the vest with the ammo pod holders.
The remote line running from the air tank to the gun is just some packaging twist ties painted black.
Painted with a ton of different colored citadel paints to try to copy the multicam pasterns we wear on our paintball uniforms.
I was trying to make a replica of his actual paintball gun which is a B-5 but unfortunately broke it beyond repair so I subbed in a P90 which looks pretty similar.
Thanks for looking.](userimages/customs/19000/18974-1.jpg) Josh Real Person Original Figure Originalby G1-ToysI thought I would make a custom of a very good friend of mine who like me is an avid paintball player.
The mask and hair and knee pads were sculpted u...2 comments |
![[Snake-Eyes] Another very last minute Christmas gift.
Basically your standard Bullseye into Snakeeyes build.
Sculpted over the face and made the visor using fixit sculpt.
Painted black and drybrushed with boltgun metal from citadel.
Threw in some random weapons I had laying around.
I thought it would be fun to make a custom package for this one to so in keeping with ML packaging I stuck a GI Joe comic in there.
I even had a Timber laying around that I could use.
Turned out pretty good I think though I wish I had a bit more time to really dial it in a bit more.](userimages/customs/19000/18960-1.jpg) Snake-Eyes G.I. Joeby G1-ToysAnother very last minute Christmas gift.
Basically your standard Bullseye into Snakeeyes build.
Sculpted over the face and made the visor using fixit ...2 comments | ![[Sweet Tooth] I've been working on this as a Christmas gift for the worlds most fanatic twisted metal fan.
The head was entirely sculpted by me using aves fixit sculpt.
I decided to sacrifice the ab crunch articulation to fatten him up a bit again using aves, I think it was for the best.
The chest harness was made using thin strips of foam sheets, I have never heard of let alone used this stuff before and got the idea from a thread on these forums where Bobtheodd and Darththomas81 were talking about using them for cape making. At any rate I think the harness turned out pretty good thanks for the inspiration guys.
Finally I painted the whole thing using Citadel paints and sealed it with some purity seal as it is probably going to get a lot of play wear.
I hope you all like him and I would love to hear any comments and/or criticisms.
Thanks all.](userimages/customs/19000/18943-1.jpg) Sweet Tooth Twisted Metalby G1-ToysI've been working on this as a Christmas gift for the worlds most fanatic twisted metal fan.
The head was entirely sculpted by me using aves fixit sc...5 comments |
![[Homey D Clown] It just wouldn't be a clown contest without the most iconic clown of the early 90's.
I took a ML Luke Cage sanded of the afro and headband then covered the whole thing with apoxie sculp.
I used a bamboo skewer and a razor blade to sculpt in all the details from the hair on down to his boots (man I can't wait to get some actual tools).
He retains almost all the articulation of the original figure other than the ab crunch.](userimages/customs/17500/17039-1.jpg) Homey D Clown Originalby G1-ToysIt just wouldn't be a clown contest without the most iconic clown of the early 90's.
I took a ML Luke Cage sanded of the afro and headband then cover...7 comments | ![[Lunatic] I dremeled out the face of build together Mojo figure and joined it to a Maestro figure I had laying around, I then sculpted the neck,scalp and hair to trying to get it all looking as seamless as I could.
I then sculpted the shirt,tie, boot and wrist cuffs using aves fixit sculpt and followed it up with a paint job using Citadel paints.
I hope you all enjoy](userimages/customs/17500/17038-1.jpg) Lunatic Originalby G1-ToysI dremeled out the face of build together Mojo figure and joined it to a Maestro figure I had laying around, I then sculpted the neck,scalp and hair t...4 comments |
![[UA2 - Deadpool] Hi all.
Submitted is my first ever(other than a couple repaints)custom.
I have been lurking around the site and forums here for a while now and you all have inspired me to take a crack at creating my own customs.
You all have been a huge inspiration to me and I would like to thank you all for the volumes of knowledge located in these forums, I have learned a lot.
This version of Deadpool is based on the upcoming Ultimate Alliance 2 video game coming out.
I don't think I've seen one like this yet so I hope you like it.
The torso and arms are from a ML Faceoff Punisher.
The legs are from a ML Faceoff Jigsaw
The head is from Superpatriot
The hands and forearms I believe are from a Redskull.
There was a fair bit of sculpting that went into building up the torso to give more of the leather suit look as well as the collar around his neck.
The Harness and shoulder straps were all sculpted using Aves Fixit sculpt and a couple zipties.
Painted with Citadel paints.
Thanks for looking](userimages/customs/17000/16933-1.jpg) UA2 - Deadpool Marvel Legendsby G1-ToysHi all.
Submitted is my first ever(other than a couple repaints)custom.
I have been lurking around the site and forums here for a while now and you al...2 comments | |
|