![[Battle Damaged T.800] NECA TERMINATOR and Jason figers were used in this one.The process was the same as the other figures with some paint and dry brushing for effect.Again the legs look a little long but I can live with it.I hope you all like this bad boy.](userimages/customs/49500/49301-1.jpg) Battle Damaged T.800 Terminatorby T-78NECA TERMINATOR and Jason figers were used in this one.The process was the same as the other figures with some paint and dry brushing for effect.Again...6 comments | ![[Servivor] NECA Splinter cell figure and lots of fodder .
Inspired by the Noland figure from PREDATORS this figure has taken some time to finish hope you all like it.](userimages/customs/48500/48450-1.jpg) Servivor Predatorby T-78NECA Splinter cell figure and lots of fodder .
Inspired by the Noland figure from PREDATORS this figure has taken some time to finish hope you all ...8 comments |
![[Terminator] NECA TERMINATOR and Friday the 13th Jason figures were used in this one.After I finished the first one a did I hade to do a nother . This figure went together the same as the others and with some dry brushing to finish it off.](userimages/customs/48500/48209-1.jpg) Terminator Terminatorby T-78NECA TERMINATOR and Friday the 13th Jason figures were used in this one.After I finished the first one a did I hade to do a nother . This figure went ...7 comments | ![[Terminator] NECA TERMINATOR and Friday the 13th Jason figures went into this one. First I removed the legs from both figures I then removed the feet. The boots from the TERMINATOR figure went in well but had to be glued in place and have no articulation . I then removed the waist articulation from the TERMINATOR figure and glued it to the Jason legs . If you want to give this a go you have to soak the figure in hot water. I then put the figure together and gave it some dry brushing . This figure went together well and dose not look to bad I hope you all like this bad boy.](userimages/customs/48500/48174-1.jpg) Terminator Terminatorby T-78NECA TERMINATOR and Friday the 13th Jason figures went into this one. First I removed the legs from both figures I then removed the feet. The boots fr...2 comments |
![[Terminator] The base figure is a NECA Battle damaged TERMINATOR - the legs are from a Left for dead SMOKER-the weapons are from some Resident Evil figures as well as the pouches that I glued to the jacket. Some dry brushing as well and some more details here and there.](userimages/customs/48500/48100-1.jpg) Terminator Terminatorby T-78The base figure is a NECA Battle damaged TERMINATOR - the legs are from a Left for dead SMOKER-the weapons are from some Resident Evil figures as well...3 comments | ![[Kyle Reese] NECA Kyle Reese and Friday the 13th Jason were yoused in this one .First of I broke both figures down then I had to cut the waist articulation so it would fit onto Josons legs its not really a snug fit but the shirt and coat hide the imperfections.The shoes went in ok and still have articulation finished of with the paint on the legs and some dry brushing this is the final product hope you all enjoy this bad boy . Come with me if you wont to live!!](userimages/customs/48000/47668-1.jpg) Kyle Reese Terminatorby T-78NECA Kyle Reese and Friday the 13th Jason were yoused in this one .First of I broke both figures down then I had to cut the waist articulation so it w...4 comments |
![[Terminator T-800] NECA TERMINATOR and left 4 dead SMOKER figures went into this one. First I soaked the figures in hot water to soften them up then I removed the waist articulaton from the TERMINATOR (I will have a picture of this as it is easier to show rather than explain). I then glued the waist onto the SMOKER legs. I know the legs aren't movie accurate, but I think it looks good. Finished off with some paint and tons of dry brushing. This is the end result, hope you all like it.](userimages/customs/48000/47538-1.jpg) Terminator T-800 Terminatorby T-78NECA TERMINATOR and left 4 dead SMOKER figures went into this one. First I soaked the figures in hot water to soften them up then I removed the waist ...4 comments | ![[Terminator] NECA T.800 Terminator make up the upper half of this figure and a NECA left for dead Smoker figure for the lower.I started of by dismantling both figures and then painting the smokers legs to match the T.800s colors .I then removed the waist articulation from the T.800s legs and glued it to the smokers it did not fit to well but the jacket hides the imperfections well.The belt and boots are also from the T.800 I just cut the belt off and added it to the figure. The boots went in well also. I gave this figure lots of dry brushing to bring out the detail.He looks abit long in the leg but I can live with it and it has tons of extra articulation as well.Hope you all like this figure .](userimages/customs/47500/47095-1.jpg) Terminator Terminatorby T-78NECA T.800 Terminator make up the upper half of this figure and a NECA left for dead Smoker figure for the lower.I started of by dismantling both figu...5 comments |
![[Elder PREDATOR] NECA Elder-Shaman and some Wolf armour went into this bad boy.I started by removing the Shamans arms and legs and putting the Elders on. I then went onto adding all the trophies and extra armour . I used the City Hunters Plasma cannon as a targeting laser , I did this by cutting the city hunters one in half and putting it onto the Elders cannon.With some dry brushing and lether straping on the gauntlets . I had lots of fun with this figure I hope you all like !! HAPPY NEW YEAR !!](userimages/customs/46000/45696-1.jpg) Elder PREDATOR Predatorby T-78NECA Elder-Shaman and some Wolf armour went into this bad boy.I started by removing the Shamans arms and legs and putting the Elders on. I then went o...2 comments | ![[Assassins Creed] NECA Altair and Ezio figures were used in this one. First I broke the figures down and dry brushed all the parts. For the first time on the figures head I gave sculpting a go. I removed the hood by cutting it away then using acrylic paint to sculpted the hair which turned out really good. This has to be one of my best customs to date hope you all like it.](userimages/customs/44000/43907-1.jpg) Assassins Creed Assasian's Creedby T-78NECA Altair and Ezio figures were used in this one. First I broke the figures down and dry brushed all the parts. For the first time on the figures he...5 comments |
![[Altair] NECA Altair and Ezio went into making this one. First I put all the armour from Ezio on to Altair repositioned the weapons and gave it some dry brushing.](userimages/customs/43500/43042-1.jpg) Altair Assasian's Creedby T-78NECA Altair and Ezio went into making this one. First I put all the armour from Ezio on to Altair repositioned the weapons and gave it some dry brushi...2 comments | ![[Assassins Creed] NECA Altair and Ezio went into this one. I just put the armour from Ezio into this figure and gave it some dry brushing. Hope you all enjoy it.](userimages/customs/43000/42977-1.jpg) Assassins Creed Assasian's Creedby T-78NECA Altair and Ezio went into this one. I just put the armour from Ezio into this figure and gave it some dry brushing. Hope you all enjoy it....4 comments |
![[Altair] NECA Altair figure , Repainted chopped and changed and sholder armour from a PREDATOR figure.](userimages/customs/43000/42967-1.jpg) Altair | ![[Original PREDATOR] NECA Gardian, Wolf, Classic, Falconner and Elder.I first dry brushed the figure and then added all the armour, weapons and trophies.On the back of the figure I put an extra power pack and sword from the Elder, the leg armour as well as the chest is from the Wolf and the straps on the legs are lether laces from a hobby shop.The hand held weapon is made from the classics plasma cannon and handle from the Wolfs. I gave him another smart disc and more armour on the right uper arm . Lots more dry brushing completed the figure I hope you all enjoy this bad boy as much as I did puting him together.](userimages/customs/42500/42186-1.jpg) Original PREDATOR Predatorby T-78NECA Gardian, Wolf, Classic, Falconner and Elder.I first dry brushed the figure and then added all the armour, weapons and trophies.On the back of the...1 comments |
![[Predator] NECA Wolf , Snake Elder and bits from others. This one was ment to be a Wolf custom but I got abit carried awy with it .](userimages/customs/42000/41560-1.jpg) Predator Predatorby T-78NECA Wolf , Snake Elder and bits from others. This one was ment to be a Wolf custom but I got abit carried awy with it ....7 comments | ![[Wolf PREDATOR] NECA Wolf and Snake went into making this bad boy.To make a long story short I removed the lower arms and legs then attached the Wolfs. The arms are glued on and the legs are in place by using the pegs from the Snake figure,this means that the lower legs have the same articulation as any other figure. The hands are attached by the original pegs that are just glued into position,and have full articulation.The head has the ball peg from the Snake head in it which gives it full articulation as well.The harness and straps on the legs are leather cord from a hobby shop.I then put all the Wolfs parts on and dry brushed the figure for the desired affect. The legs look a little short but I dont mind,I have a Wolf to go with my other PREDATORS.Hope you enjoy.](userimages/customs/42000/41529-1.jpg) Wolf PREDATOR Predatorby T-78NECA Wolf and Snake went into making this bad boy.To make a long story short I removed the lower arms and legs then attached the Wolfs. The arms are g...4 comments |
![[Predator] NECA Snake, Classic and Wolf were used in this one.I added the Wolfs armour and weapons to the figure then the Classics head, leg armour, gauntlet and computer. Finished off with a hand held weapon, trophies and dry brushing, this is the finished figure](userimages/customs/41500/41324-1.jpg) Predator Predatorby T-78NECA Snake, Classic and Wolf were used in this one.I added the Wolfs armour and weapons to the figure then the Classics head, leg armour, gauntlet and...3 comments | ![[Elder PREDATOR] NECA City Hunter , Elder and classic went into this one . I first removed the dreds from the classics head and replaced them with the Elders. Then I added all the armour , weapons and accessories from the Elder. Finished of with some dry brushing this is the result hope you all enjoy.](userimages/customs/40500/40176-1.jpg) Elder PREDATOR Predatorby T-78NECA City Hunter , Elder and classic went into this one . I first removed the dreds from the classics head and replaced them with the Elders. Then I a...6 comments |
![[Predator] NECA Snake and Classic went into this one . The base figure is the snake and the rest is from the classic . Ear phone wire as hoses to the mask, a smart disk on his hip and a spear on the other leg.I also re-sculpted his hands by using hot water to soften it then holding it in place . Trophies added for effect and lots of dry brushing complete this figure. A loin cloth from the Berserker also.](userimages/customs/40000/39877-1.jpg) Predator Predatorby T-78NECA Snake and Classic went into this one . The base figure is the snake and the rest is from the classic . Ear phone wire as hoses to the mask, a sma...2 comments | ![[Predator] NECA Boar,Wolf,Elder and Classic were used in this one.First I added the Wolfs armour, plasma cannons, bandalier, power pack and wrist gauntlet. I gave him a hand held plasma weapon by swapping the handle over from the Wolfs cannon to a Classics one which is stored on the hip of the figure.Ear phone wires as hoses to the mask and trophies here and there completes this BAD BOY .](userimages/customs/39500/39450-1.jpg) Predator Predatorby T-78NECA Boar,Wolf,Elder and Classic were used in this one.First I added the Wolfs armour, plasma cannons, bandalier, power pack and wrist gauntlet. I gav...4 comments |
![[Predator] NECA Boar, Elder, City Hunter and Wolf parts were used in this one. I swapped the head with the Boar mask and then added the belt from the Elder. Changed the plasma cannon with the Wolfs and put the City Hunters one on the wrist gauntlet. Some blades on his elbows an extra smart disk on his left leg and the wolfs power pack with the cleaning kit next to it under the plasma cannon. Trophies added to the figure for effect with some dry brushing and this is the finished PREDATOR .](userimages/customs/39500/39408-1.jpg) Predator Predatorby T-78NECA Boar, Elder, City Hunter and Wolf parts were used in this one. I swapped the head with the Boar mask and then added the belt from the Elder. Chan...3 comments | ![[Predator] I have always wondered what an experienced Yautja would look like. We have been given glimpses such as Elders and the Wolf but never a movie where a PREDATOR in his prime is on the hunt and successful. The past 3 or 4 of my customs are inspierd by this idea. I started this one by dry brushing the figure then adding the extra armour to his legs and trophies to the armour throughout the figure. The sword on his back I made from the Falconers blade and some bones from animal skeleton toys I found in a junk shop. The trophies on the shoulders are from the Berserker skull with parts from the Wolf,Elder,City Hunter and Falconer. Hope you all enjoy this bad boy !!](userimages/customs/39000/38816-1.jpg) Predator Predatorby T-78I have always wondered what an experienced Yautja would look like. We have been given glimpses such as Elders and the Wolf but never a movie where a P...11 comments |
![[Elder PREDATOR] I had fun putting this one together it has parts from the Elder,City Hunter ,Shaman and classic. The trophies on the shoulders are from the Berserker skull from the two pack as well as the human skull hanging on a chain on his back.Finished off with some dry brushing this one is my favourite to date hope you all enjoy.](userimages/customs/39000/38551-1.jpg) Elder PREDATOR Predatorby T-78I had fun putting this one together it has parts from the Elder,City Hunter ,Shaman and classic. The trophies on the shoulders are from the Berserker ...2 comments | ![[Predator] I started this one by removing the shoulder cannon and replacing it with the bigger Wolf weapon then adding a classic one to the wrist gauntlet. I put the Wolf power pack on his back and moved the hunters one over a bit. I then hit him up with various parts from the WOLF,Sharman,Berserker and Classic. The trophies on his shoulder are from the Berserker skull and finished off with some headphone wires as hoses to the helmat and lots of dry brushing. I hope you all enjoy!](userimages/customs/38500/38340-1.jpg) Predator Predatorby T-78I started this one by removing the shoulder cannon and replacing it with the bigger Wolf weapon then adding a classic one to the wrist gauntlet. I put...3 comments |
![[Predator] NECA City Hunter with parts from the Wolf , Berserker ,Classic and Elder predators. I customed this figure becouse I snapped the shoulder plasma weapon so I glued the classic cannon to it and it semed to work OK . I then put the broken one on the preds gauntlet which doesn't look too bad.I used ear phone leads as the hoses to his mask ,I did try a black rubber O ring but was too stiff and it looked all bad .Finished it of with a wash and dry brush and all finished. Hope you all enjoy !!](userimages/customs/38000/37836-1.jpg) Predator Predatorby T-78NECA City Hunter with parts from the Wolf , Berserker ,Classic and Elder predators. I customed this figure becouse I snapped the shoulder plasma weap...4 comments | ![[Predator] Most of the parts on this one come from the Elder with some Wolf armour ,trophies and weapons.There is also a knife and a pouch from a Resident Evil figure and the head is of a Gort pred. Not much painting at all just some dry brushing and this is the finished PREDATOR.](userimages/customs/38000/37513-1.jpg) Predator Predatorby T-78Most of the parts on this one come from the Elder with some Wolf armour ,trophies and weapons.There is also a knife and a pouch from a Resident Evil f...2 comments |
![[Predator] NECA City Hunter and wolf parts on this one with dry brushing.](userimages/customs/37500/37366-1.jpg) Predator | ![[Predator] NECA Wolf and Classic were used in this one. The neck is from the Wolf so it fits and has full articulation. The cleaning kit and power pack are from the wolf also. The hand held weapon is a combination of wrist blades and spear both from the wolf. Adorned with trophies and dry brushing this is the finished predator.](userimages/customs/37500/37110-1.jpg) Predator Predatorby T-78NECA Wolf and Classic were used in this one. The neck is from the Wolf so it fits and has full articulation. The cleaning kit and power pack are from ...11 comments |
![[Elder Predator] Neca Elder pred. Wolf pred .With dry brush and a chain with trophies attached.](userimages/customs/37500/37107-1.jpg) Elder Predator | |
|