![[Spider-Man 2099] Here's another Spider-Man. This time it's 2099. I had an MU Silver Surfer just sort of sitting around and decided to finally do something with it. I base coated it black and dry-brushed it with navy blue. I used bright flat red for contrast and sculpted over the Surfer's face for the mask. I think my biggest regret about this one was how the face came out. I didn't realize til after what a bad head base the surfer was. His face is quite rigid with defined features, making the sculpt over it a bit uneven. But still, I think I did my best to salvage it.](userimages/customs/22000/21949-1.jpg) Spider-Man 2099 Spider-Manby AzraelHere's another Spider-Man. This time it's 2099. I had an MU Silver Surfer just sort of sitting around and decided to finally do something with it. I b...4 comments | ![[V.I. Lenin] Vladimir Ilyich Lenin, the greatest Revolutionary of our time. I would love to give you this guys like story, but I'll just make it brief:
He became a revolutionary after his brother was executed for plotting against the czar. After being exiled, he came back with the help of Germany, and took over Russia in a matter of weeks using his personal army, the Bolsheviks. He then fused socialism with his own Marxist ideas to create Communism in an attempt to better the country. This man saw the world for what it was and is a personal hero to me.
He was made from a Marvel legends Professor X with sculpted hair and goatee-ish beard.](userimages/customs/22000/21719-1.jpg) V.I. Lenin Miscby AzraelVladimir Ilyich Lenin, the greatest Revolutionary of our time. I would love to give you this guys like story, but I'll just make it brief:
He became ...6 comments |
![[Deadpool] Alright, so after making my Knightfall Azrael/Batman I had one The Batman figure elft over. While it was technically the figure of Crimson Patrol batman, it was the standard mold. I'd been itching to make a Deadpool for a while, but I wanted to do something different, and I knew THIS was that something. I sculpted over the mouth and cut off the ears, sculpted the harness and a ninja hoodie then got to painting. I like how this turned out. The head naturally had a sort of "surprised" look, but it was more serious, which I was thankful for, because I wanted to go with a more serious looking Deadpool than goofy, I think I succeeded. Sorry, no weapons for him to pose with](userimages/customs/22000/21616-1.jpg) Deadpool Marvel Universeby AzraelAlright, so after making my Knightfall Azrael/Batman I had one The Batman figure elft over. While it was technically the figure of Crimson Patrol batm...2 comments | ![[Knightfall Azrael Batman (Azbats)] Well I had been working on this one since summer. I bought a pile of "The Batman" toys and I noticed Kryptonite Claw Batman looked a lot like Azbats. I found the Crimson patrol Batman on the Realms tore, bought it, and a few days later here I am. I hate the fact that it used soft plastic, because Ihad to use my crappy acrylics, which made the paint look a bit choppy and gross. But I still like it.
Base - Kryptonite Claw Batman
Head/shoulder armor, wings - Crimson Patrol Batman](userimages/customs/22000/21583-1.jpg) Knightfall Azrael Batman (Azbats) Batmanby AzraelWell I had been working on this one since summer. I bought a pile of "The Batman" toys and I noticed Kryptonite Claw Batman looked a lot lik...2 comments |
![[Assassin Spider-Man] Well, I had a spare MU Black Spidey, and I wanted to make something out of him. After reading "What If? Spider-Man vs Wolverine" I knew what had to be done. This Spider-Man is absed off Alex Ross's design for movie Spidey, only I found it to be a bit cooler. He was made entirely from Black Spider-Man, except for the belt pouches, which were cut from a XMOW Deadpool Harness then glued together. I think the hardest part of making this was the red. It kept blending with the black on the figure, so I had to use a thin layer of white to help it show up better. Also, I decided to paint the logo instead of doing the smart thing and drawing it on with sharpie.](userimages/customs/21500/21430-1.jpg) Assassin Spider-Man Spider-Manby AzraelWell, I had a spare MU Black Spidey, and I wanted to make something out of him. After reading "What If? Spider-Man vs Wolverine" I knew what...6 comments | ![[Slade Wilson a.K.a Deathstroke] So I was looking through old customs and I noticed a figure by Super G. Basically it was a hardcore version of Deathstroke's Teen Titans Animated counterpart, Slade. Inspired by what seemed to be a fusion of cartoon and comic, I decided to adapt his recipe. I used a Zipline Batman, and the neck from a Croc Armor Batman (yes the neck guard and neck are one piece that comes off) as well as mighty putty to sculpt the leg guards and shoulder pads, as well as shaves off the ears and arm spikes, finally sculpting over the mouth to complete the look. I used acrylic paints for the first tiem and I like the way it came out, definitely gonna do it again.](userimages/customs/21500/21267-1.jpg) Slade Wilson a.K.a Deathstroke D.C. Universeby AzraelSo I was looking through old customs and I noticed a figure by Super G. Basically it was a hardcore version of Deathstroke's Teen Titans Animated coun...2 comments |
![[Azrael] Finally, I've been slowly working on this one since late February. Azrael was made with the following
-MU Moon Knight: Base
-MU Iron Man: Shoulder pads
-Mighty Putty: Armor, gauntlets, hands
-Felt: Cape
The hardest part of this one was probably all the sculpting. His entire upper torso is sculpted over with armor, front and back, his hands were made from scratch, no base, no pre-done stuff, just me and some mighty Putty, and while I know it's hard to see the details in the pics, there are individual fingers. Another thing was the emblem on the mask, I had to buy a new brush just to paint it, and even then it was still pretty annoying. The cape was a split between felt and vinyl, eventualyl I went with felt, may change that in the future. I think this is my new favorite custom. While it was a lot of hard work, I'd be lying if I didn't say it was fun to make. Unlike DCUC Azrael, this one isn't looking down. It's nice to be able to look him in the eye lol.](userimages/customs/21500/21132-1.jpg) Azrael Batmanby AzraelFinally, I've been slowly working on this one since late February. Azrael was made with the following
-MU Moon Knight: Base
-MU Iron Man: Shoulder pa...7 comments | ![[Daniel a.K.a. Azrael] So this is a custom I've wanted to do forever. The only reason I didn't do it was because I never found a head that looked enough like me, so I never bothered getting started. A few weeks ago I got a new hat, and started wearing it all the time, along with a new jacket and jeans. This was what I wore 6 out of 7 days a week. I had a Cole from inFamous custom I never gt around to painting, so scrapping him, I used the upper body from Paris Pursuit Snake eyes and the legs and feet from Storm Shadow. Looking through my fodder drawer, I noticed a Starkiller head from the jedi Apprentice figure that looked enough like me from the nose down, so to cover the eyes I sculpted my hat and a hood onto the neck, and with that, I was done! If you didn't read this here's the short version:
Head - Jedi Apprentice (From Starkiller 3 pack) & Sculpted hat
Upper body - Paris Pursuit Snake Eyes & sculpted hood
Hands - RoC Duke
Legs - RoC Storm Shadow
Feet - RoC Storm Shadow
Thanks for looking!](userimages/customs/21000/20646-1.jpg) Daniel a.K.a. Azrael Originalby AzraelSo this is a custom I've wanted to do forever. The only reason I didn't do it was because I never found a head that looked enough like me, so I never ...6 comments |
![[UDON Taskmaster] UDON Taskmaster: City Strike Snake Eyes + Mighty Putty, with Storm Shadow lower arms + Mighty Putty.](userimages/customs/19000/18955-1.jpg) UDON Taskmaster | |
|