![[X23] Movie liz with hair from a heroes nikki figure.I replaced the left hand for a closed fist and give both hands real metal claws and both feet real metal claws.I turned the cross necklace into a X symbol and that was it.The only paint that I had to do was touch up on the skin tone and paint the hair black.This one goes with the military type group I like to call ultimate weapon X and is the last one I've done so far I my have to do a deadpool for this group soon though.](userimages/customs/39500/39449-1.jpg) X23 X-Menby mbosky99Movie liz with hair from a heroes nikki figure.I replaced the left hand for a closed fist and give both hands real metal claws and both feet real meta...8 comments | ![[Sabertooth] WWE Mcmahon with a sabertooth head cast that I did some work to and attached using a magnet.The fingers got some animal like claws added on.I also added a little height on the soles of the boots.After that a total head to toe custom paint job and that was it.He has more of a military feel to him and that kind of plays into the group that I've put together with these custom figures(wolverine,mystique and now sabertooth).Let me know what you think and thanks for looking.Oh yeah,I think I finally have my photo taking setup the way a like it and I think these are my best photos on the realm so far I hope you all will agree thanks.](userimages/customs/39500/39448-1.jpg) Sabertooth Marvelby mbosky99WWE Mcmahon with a sabertooth head cast that I did some work to and attached using a magnet.The fingers got some animal like claws added on.I also add...9 comments |
![[Iron Prime] Just an Iron man 2 movie toy with add on pieces from some gundam figures and an old G1 optimus prime toy along with a little sculpting on the face plate and that was about it the gun and sword are also gundam parts.I had this guy setting on my work table put together and waiting for paint for about a month and then I started watching the original cartoon on netflix and got inspired to finish this guy and then I saw Arez'War-prime(which is awesome)and then I got really motivated so I just finished him up yesterday and here you go I hope you all enjoy checking it out and thanks for looking.](userimages/customs/39000/38768-1.jpg) Iron Prime Iron Manby mbosky99Just an Iron man 2 movie toy with add on pieces from some gundam figures and an old G1 optimus prime toy along with a little sculpting on the face pla...5 comments | ![[M551 Sheridan Stealth Iron Man] This guy just kind of popped into my head after picking up another war machine figure.Just alot of add on parts from some other Iron man and gundam toys,heads from Iron man 1 figure along with the arms from the shoulder joints down but used the war machine hands and then a complete repaint head to toe and that was that.I'm calling him a M551 sheridan stealth Iron man because he's kind of a mix between a stealth boomer (with the black on black paint job)and a tank(M551 Sheridan).Hope you guys like him as much as I do this one was alot of fun and easy.As always comments are welcome and thanks for looking.](userimages/customs/38000/37569-1.jpg) M551 Sheridan Stealth Iron Man Iron Manby mbosky99This guy just kind of popped into my head after picking up another war machine figure.Just alot of add on parts from some other Iron man and gundam to...4 comments |
![[Azbats] Really sample custom but I had to do it.Removed the chest/cape piece from the base figure and made a new one out of blister pack plastic the head was a black panther cast from DMC and a cloth cape to finish this one off.Let me know what you think and thanks for looking.](userimages/customs/37000/36739-1.jpg) Azbats Batmanby mbosky99Really sample custom but I had to do it.Removed the chest/cape piece from the base figure and made a new one out of blister pack plastic the head was ...8 comments | ![[Brainiac] Had to do a lot of sanding to remove all the costume detail of the creeper but I wanted to use him as the base it's a leaner looking figure and I liked the hands,the head is a cast job from DMC casting.After the sanding and a few detail pieces added the figure got a full repaint and that was just about it.I wanted something to go with my legion of doom villains form the justice league animated series and this guy fits in nicely.As always your comments are welcome and thanks for looking.](userimages/customs/37000/36540-1.jpg) Brainiac Justice Leagueby mbosky99Had to do a lot of sanding to remove all the costume detail of the creeper but I wanted to use him as the base it's a leaner looking figure and I like...9 comments |
![[Nightwing] Started off with a DC direct JLA geo force removed the belt and add armor panels that are just pieces of paper cut and glued into place(kind of hard to see in some of the pics,sorry).After that I added a belt from a batman begins movie figure that was split at the buckel and give him a dcuc nightwing head attaching it using the magnet method(which I really like using)the baton was cut from a gundam staff.Painted black and then giving a dry brushing and then the blue areas have also got the dry brush treatment with a few silver spots on the belt he was done.Really easy custom but I need him to go along with my collection.I wanted him to have that arkham city feel but also some classic flare which the base figure worked great for.Nightwing is a favorite of mine and I hope I did him justice here,love to know what you think and thanks for looking.](userimages/customs/36000/35702-1.jpg) Nightwing Batmanby mbosky99Started off with a DC direct JLA geo force removed the belt and add armor panels that are just pieces of paper cut and glued into place(kind of hard t...10 comments | ![[Rogue] Reworked my DC direct X-men rogue figure a bit and repainted the whole thing head to toe.After doing the gambit figure I wanted to redo this rogue to fit in with the rest of this series a little bit better so here you go tell me what you think and thanks for looking!](userimages/customs/35000/34740-1.jpg) Rogue X-Menby mbosky99Reworked my DC direct X-men rogue figure a bit and repainted the whole thing head to toe.After doing the gambit figure I wanted to redo this rogue to ...7 comments |
![[Kitty Pryde(AKA:Shadowcat)] DC direct alex ross justice supergirl with all the unneeded costume details removed and gaps filled in and sanded for a smooth finish.Added the mask with aves and fresh new paint job and thats about it on this one.Another to go with my DC direct X-men series.I based the look off of a x-men poster I have where she's in her Shadowcat outfit and I thought that look would work with this series of x-men let me know what you think and thanks for looking!](userimages/customs/35000/34735-1.jpg) Kitty Pryde(AKA:Shadowcat) X-Menby mbosky99DC direct alex ross justice supergirl with all the unneeded costume details removed and gaps filled in and sanded for a smooth finish.Added the mask w...12 comments | ![[Future Superman] Really simple custom but I've been wanting to do it for a long time.Took the kingdom come alex ross superman and removed the cape then sanded and filled in any costume details and add other detail were they where needed(The pieces on the arms)after that I gave him a head to toe paint job and thats it. This version of supes comes from the batman/superman annual#4 and goes great with my DC direct Batman Beyond figure I did way back. Love to know what you all think and thanks for looking.](userimages/customs/34500/34403-1.jpg) Future Superman Supermanby mbosky99Really simple custom but I've been wanting to do it for a long time.Took the kingdom come alex ross superman and removed the cape then sanded and fill...11 comments |
![[Gambit] Well here you guys go my fiftieth custom on the figure realm and to make a full circle I'm submitting an Alex Ross design X-Men figure which goes with the first figure I put on this site. This one is of my other favorite x-men gambit,Alex Ross didn't do this design but I wanted him in my collection of these x-men so I came up with this.Started off as a JSA Starman I used the alternet head and sanded off the beard then sculpted the head gear and added some hair in the back to tie the sculpt work all together.I then painted him head to toe to match the other x-men's outfits and did a total repaint on the head with red eyes and stubble on the face for that classic gambit look. The coat is cut out of a black latex dish washing glove, the same as my 1989 movie style batman's cape.He comes with a real metal staff and charged playing cards.Not that hard of a custom but man do I love this one.Please let me know what you all think and thanks for looking.](userimages/customs/34500/34243-1.jpg) Gambit X-Menby mbosky99Well here you guys go my fiftieth custom on the figure realm and to make a full circle I'm submitting an Alex Ross design X-Men figure which goes with...4 comments | ![[Mr.Freeze] Deadman head and then all the sliver bands are foam sheets and blister pack plastic in few areas(shoulder bands and the back of the gloves)with a few wire detail seams,the rebreather back pack,circle pieces on the waist and dome bands and all of the gun are made from old gundam pieces,also added so ice detail using my hot glue gun.The dome helmet is just a plastic cap from some spray bottle,I made it so that I can remove it to be able to move the head.Than a custom paint job and their you go.I didn't like the DC batman legacy edition version of Mr.freeze so I came up with this version which is kind of like a DC classic take on BTAS Mr.freeze which is my favorite take on the character.Love to know what you all think of this one as I think it turned out great,one of my new personal favorites!](userimages/customs/34000/33621-1.jpg) Mr.Freeze Batmanby mbosky99Deadman head and then all the sliver bands are foam sheets and blister pack plastic in few areas(shoulder bands and the back of the gloves)with a few ...14 comments |
![[Secret Project Iron Man] I saw the Hot Toys Secret Project Iron Man and really wanted one but didnt have the cash to buy it so the cheaper option was to repaint the 6 inch movie toy version and thats what I did,So this is just a repaint nothing amazing but I was really happy with how it turned out.All colors where mixed from model masters acryl paint.Hope you all enjoy it,thanks for looking!](userimages/customs/32500/32446-1.jpg) Secret Project Iron Man Iron Manby mbosky99I saw the Hot Toys Secret Project Iron Man and really wanted one but didnt have the cash to buy it so the cheaper option was to repaint the 6 inch mov...16 comments | ![[Mystique] Started off with some sanding.The midsection,chest and arms all had to be sanded down to remove costume detail.The chest,collar bone and neck where all sculpted to add detail along with her costume top(The bottom part)and the top of her pants.The head was reworked by removing the hair and replacing it with the hair from a DC classics wonder girl's and sculpting the little skull on her forehead.New paints head to toe and thats it.I did this one to go along with my David Finch's wolverine and I was going for her look from Mike Mayhew's art.Please leave any comments you may have and thanks for looking.](userimages/customs/31000/30743-1.jpg) Mystique X-Menby mbosky99Started off with some sanding.The midsection,chest and arms all had to be sanded down to remove costume detail.The chest,collar bone and neck where al...6 comments |
![[Power Girl] Alex Ross Justice Wonder Women with a lot of sanding and sculpt work everything that is Power Girl was sculpted(chest,costume detail,gloves and boots).The rope for her cape was WW's lasso and the cape is just cloth.The head came from the DC armored series Power Girl and has great range of movement on this body.The white I used for the costume was Formula P3 which covers great and everything was painted with modelmasters.Thanks for looking and all comments are welcome!](userimages/customs/31000/30692-1.jpg) Power Girl Justice Leagueby mbosky99Alex Ross Justice Wonder Women with a lot of sanding and sculpt work everything that is Power Girl was sculpted(chest,costume detail,gloves and boots)...4 comments | ![[Two Face] Just a repaint same as everyone else I wanted him to look like the animated series Two Face so thats what happened blue face,white hair and black and white suit I got rid of the bow tie and sculpted a new long tie in its place.](userimages/customs/31000/30602-1.jpg) Two Face Batmanby mbosky99Just a repaint same as everyone else I wanted him to look like the animated series Two Face so thats what happened blue face,white hair and black and ...6 comments |
![[Red Robin] Basically just a more articulate 6 inch version of the red robin I did using the alex ross justice figure as a base.This one started off as a deadman and the head from a batman with the ears cut off and some minor sculpt work.I made the figure a slight bit shorter than my other DCU batman figure by cut away some of the shins on both legs and then sculpting the boots over where the legs had been put back together.All other costume details(chest and belt buckle)where sculpted with aves,the chest straps are rubber bands so he keeps the waste movement and then he got a total repaint.Thanks for looking and your comments are always welcome!](userimages/customs/31000/30600-1.jpg) Red Robin Batmanby mbosky99Basically just a more articulate 6 inch version of the red robin I did using the alex ross justice figure as a base.This one started off as a deadman ...15 comments | ![[Red Lantern Beal] I just had to make myself as a red lantern!Really simple custom got the skallox figure and add some wire costume details and used the red lantern emblem from the night lik neck piece for my chest logo.I had to cut and swap the hands from a dcu green lantern figure so that I would have the right amount of fingers and keep the detail from the wrist gantlets.The head is a ML sentry cast from DMC with a little sculpt work to make it look more like me.Finished it off with a new paint job and that was it!This one is my new favorite(Duh!)and I love freaking people out with how much it looks like me.As always I would love to know what eveybody thinks about this one and thanks for looking!](userimages/customs/29500/29252-1.jpg) Red Lantern Beal Green Lanternby mbosky99I just had to make myself as a red lantern!Really simple custom got the skallox figure and add some wire costume details and used the red lantern embl...9 comments |
![[Magneto] Started off with the marvel select mags and cut away the cape and chest piece then I swaped heads with the dcu negative man figure and used the hands from a dcu deadman added a few costume details with wire on the chest and mid-section and glued the cape and chest piece into place.Had to cut the belt buckel off and made the forearm and shin bands from rubber bands and aves sculpt also sculpted over the mouth of the crappy marvel select head and then paints which wasn't much as the base was already red.I like this one way better than the marvel select one that I started off with and it's in scale with the rest of my 6 inch x-men collection love to hear what you guys think about this one and thanks for looking!](userimages/customs/28500/28395-1.jpg) Magneto X-Menby mbosky99Started off with the marvel select mags and cut away the cape and chest piece then I swaped heads with the dcu negative man figure and used the hands ...9 comments | ![[Batman] DCU Batman base with a modified alex ross justice batman head.The cape is made out of a black latex dishwashing glove I got at the dollar tree store and hot glue in just the right places to make the folds,then I sculpted the chest and cowl pieces to look like the 1989 batman film the paints where done to look like the films suit using model masters acryl flat black and testors enamel gold for the belt and the bat symbol was hand painted in the chest piece.I like the way this one turned out its not an exact keaton likeness but still cool,love to know what everyone thinks so please leave any comment and thanks for looking!](userimages/customs/27500/27401-1.jpg) Batman Batman: Movie Styleby mbosky99DCU Batman base with a modified alex ross justice batman head.The cape is made out of a black latex dishwashing glove I got at the dollar tree store a...3 comments |
![[X-23] Last member of my X-force team for now X-23!Used the forearms and lower legs which make the figure a nice height(shorter than emma but just a little taller than wolverine)of the ML X-23 and the rest is ML emma frost.Added metal claws using bobby pins and then painted the whole thing to match the X-force version of X-23 including the mask on the face.Thanks for looking and your comments are always welcome!](userimages/customs/27500/27288-1.jpg) X-23 X-Forceby mbosky99Last member of my X-force team for now X-23!Used the forearms and lower legs which make the figure a nice height(shorter than emma but just a little t...3 comments | ![[X-Force Deadpool] You had to know this guy was coming DEADPOOL BABY!!My new favorite!Captain Marvel base with arms and head from bullseye the feet came from a shield agent figure.Sculpted over the mouth and added the hood,Sculpted the X on the chest and added costume detail with wire just like my other deadpool the rest is fodder and sratch make holsters and staps and then painted head to toe.Love to know what you think of this one and thanks for looking](userimages/customs/27500/27287-1.jpg) X-Force Deadpool X-Forceby mbosky99You had to know this guy was coming DEADPOOL BABY!!My new favorite!Captain Marvel base with arms and head from bullseye the feet came from a shield ag...3 comments |
![[X-Force Domino] The next in my X-force team Domino!The same base I see that a few people have used before and I thought I would too.Sculpted the hair and collar also added a little sculpting to the brow for an meaner look and the rest it fodder for the belt and sratch made holsters and straps from blister pack plastic and rubber bands the guns came from a tomb raider toy then head to toe paint and thats it!Thanks for looking and please leave any comments you my have.](userimages/customs/27500/27286-1.jpg) X-Force Domino X-Forceby mbosky99The next in my X-force team Domino!The same base I see that a few people have used before and I thought I would too.Sculpted the hair and collar also ...0 comments | ![[X-Force Wolverine] The leader and the first in my X-Force team customs its wolverine!Real simple custom used the marvel legend series 6 wolverine(It was the 25th ann. silver version)and added the forearms and legs from the ML ultimate wolverine then modified the mask to look more like the x-force version and them just a few costume details and a full repaint and thats it.The claw where made using plexiglass and then painted,I know "But mike you make the coolest metal claws!"True(LOL)!I Wanted to try something different and to make the metal claws I usually make I have to use my bench grinder thats in the garage and its the dead of winter here in Iowa and way to cool to be outside.Love to hear what you think so leave a comment and thanks for looking!](userimages/customs/27500/27285-1.jpg) X-Force Wolverine X-Forceby mbosky99The leader and the first in my X-Force team customs its wolverine!Real simple custom used the marvel legend series 6 wolverine(It was the 25th ann. si...1 comments |
![[Joker(Mr.J if Your Nasty!HA)] Really liked the sculpt details on the son of batman joker but the thing was like 7 inches tall so to make it fit in with the dc 6 inch figures I cut him down a bit.I took a little over a quarter of an inch off of the height by cutting the legs apart below the knees and sanding down the shins and then super gluing the two parts back together and filling in any gaps and sanding them to make it look like all of that never happened.After doing all that I decided to change a few more things I got rid of the bow tie and flower on the chest and sculpted a new tie and added a vest.With the paints I wanted more of a movie joker so I went that way with the colors and also did a wash of skin tone to the face for that makeup rub off look from the movie and added a wallet chain for a small detail and red to the crowbar which I thought was I fitting touch.I like the way this turned out and would love to know what you all think.As always thanks for looking!](userimages/customs/27000/26918-1.jpg) Joker(Mr.J if Your Nasty!HA) Batmanby mbosky99Really liked the sculpt details on the son of batman joker but the thing was like 7 inches tall so to make it fit in with the dc 6 inch figures I cut ...7 comments | ![[Ultimate Iron Man] Yep another Iron Man this being my fourth variation on this toy.I had to do this one after seeing the smaller version at the store and thought that is killer.I never really liked the ultimate version of iron man the suit looked to bulky and alien like but I did like the color scheme with that being said this custom is mainly just a repaint of the movie mark VI.I did how ever do the chest plate different this time,I sculpted the whole thing with aves to make it stand a part from my other iron man customs.I used some of the paint method that I have on my other iron man custom along with some other methods like dry brusing to really make this one look cool!I hope you guys enjoy checking this one out as much as I enjoyed making this really simple but very cool custom and as always your comments are greatly appreciated!](userimages/customs/27000/26872-1.jpg) Ultimate Iron Man Iron Manby mbosky99Yep another Iron Man this being my fourth variation on this toy.I had to do this one after seeing the smaller version at the store and thought that is...3 comments |
![[David Finch's Wolverine] I'm calling this David Finch's wolverine but I was influenced but a few different artists version of wolverine but I think it definitely looks like a David Finch style wolverine.Not a lot to really tell here I started off sanding down the crazy guile hair so I could replace it with wolverines crazy hair and mutton chops then I added to the brow line for a meaner looking wolverine which was all sculpted from aves apoxie.I also sanded the bottom of the pants to make them look more like jeans along with adding some sculpting details for the jean look.Last but definitely not least my favorite part the real metal claws these I did like my movie version of wolverine and use scrap sheet metal(I uesed the metal case off of a computer)and shaped them with a bench grinder and let me tell you these thing are sharp!!After all that a custom paint job with model master acryl from head to toe inculding mud detail on the boots and BOOM done!This is my new personal favorite right now I love the way thi](userimages/customs/27000/26695-1.jpg) David Finch's Wolverine X-Menby mbosky99I'm calling this David Finch's wolverine but I was influenced but a few different artists version of wolverine but I think it definitely looks like a ...12 comments | ![[Red Lantern Bleez] I love this character in the emerald warriors comic her look is sexy and evil at the same time and I had to make this custom!The base figure is the Supes/Bats series 7 livewire I sculpted the costume details on the chest,arms and legs.Her hair was sanded down and the head was sculpted over for her mask and the bat wings on the head are blister pack plastic.I cut her feet off above the ankle and replaced them with the boots of a ML emma frost.After all that there was a lot of sanding and then a complete repaint and then a gloss coat for that sexy leather and metal look.The wings are made from balsa wood and sanded down to look like bones and super glued in place this was the most time consuming thing on this custom but I had seen other versions of this character and the wings just didn't look right so I really wanted to get them to look good and I think they turned out great!So let me know what you guys think and as always thanks for looking!](userimages/customs/26500/26285-1.jpg) Red Lantern Bleez Green Lanternby mbosky99I love this character in the emerald warriors comic her look is sexy and evil at the same time and I had to make this custom!The base figure is the Su...6 comments |
![[Thor] Anything thats not on the original figure was sculpted(I.e.the helmet,hair,circle armor,boot tops).The wings on the helmet are from an alex ross hawkgirl head that I cut and sanded to fit on the side of the helmet and head.All the leather strapes are rubber bands the skirt is three ring binder vinyl.I made the hammer out of oven bake clay and a TMNT don bo staff and the cape is just cloth.Hand painted head to toe.Love to know what you think on this one being that its the first time I've used a wrestler as a base.Thanks for looking!](userimages/customs/26000/25770-1.jpg) Thor Avengersby mbosky99Anything thats not on the original figure was sculpted(I.e.the helmet,hair,circle armor,boot tops).The wings on the helmet are from an alex ross hawkg...7 comments | ![[Red Robin] Athother addition to my justice collection.I really like the modern red robin look so I when more that way with this custom.Started off with the justice bats removed the belt,head and fins on the gloves then sanded the top of the boots to change the look I made the "skirt" bottom of the tunic out of some plastic sheet and added the seams with wire.I then sculpted the chest and waist belts the bird head emblem is card stock paper cut and glued in place and a new neck to fit the head and cape which was from the justice sups then I sculpted the mask on the head which was some JLA figure from the brad meltzer revamp seires.The belt cartridges are made from a thicker gage wire and super glued in place the staff is made from the same wire and scored to make it look segmented after all that I painted him and boom done!Let me know what you think and thanks for looking!](userimages/customs/26000/25503-1.jpg) Red Robin Justice Leagueby mbosky99Athother addition to my justice collection.I really like the modern red robin look so I when more that way with this custom.Started off with the justi...3 comments |
|