![[Adam Warlock] Warlock is the same basic recipe I used for my two Magus figures. Since they're really the same person I wanted them to look alike. The base body is a Marvel Legends Captain Marvel with DC Universe Classics fists. The head is a cast of a DC Universe Classics Black Adam with sculpted hair. The costume was made with styrene and Apoxie Sculpt.](userimages/customs/49500/49405-1.jpg) Adam Warlock Marvel Legendsby Rabid_EwokWarlock is the same basic recipe I used for my two Magus figures. Since they're really the same person I wanted them to look alike. The base body is...4 comments | ![[Magus] Here's my 2nd custom of Magus. This is his 90's look, with the samurai hairdo instead of the fro. The base body is a Marvel Legends Captain Marvel with DC Universe Classics fists. The left hand can be popped off and replaced with an Infinity Gauntlet, which was made from a Marvel Legends Cyclops left hand. The head is a cast of a DC Universe Classics Black Adam with sculpted hair. The costume was made with styrene and Apoxie Sculpt. The little skull on his belt is from a Toybiz Marvel Legends Mystique.](userimages/customs/49500/49404-1.jpg) Magus Marvel Legendsby Rabid_EwokHere's my 2nd custom of Magus. This is his 90's look, with the samurai hairdo instead of the fro. The base body is a Marvel Legends Captain Marvel wi...3 comments |
![[Magus] Magus is the second half of my "Fearsome Fros" 2-pack from CustomCon 34. The base body is a Marvel Legends Captain Marvel with DC Universe Classics fists. The head is a cast of a DC Universe Classics Black Adam with sculpted hair. The costume was made with styrene and Apoxie Sculpt.](userimages/customs/49500/49389-1.jpg) Magus Marvel Legendsby Rabid_EwokMagus is the second half of my "Fearsome Fros" 2-pack from CustomCon 34. The base body is a Marvel Legends Captain Marvel with DC Universe C...4 comments | ![[Hypno-Hustler] Here's the first half of my "Fearsome Fros" 2-pack from CustomCon 34. I started with a Marvel Legends Angel, with the standard shoulder fix for the base body, mainly because I've got a few that I need to use up. I cut out the wing hinges and re-sculpted the back. The head is from a DC Universe Classics Bronze Tiger. The hair and various costume details were sculpted. After much deliberation, I decided to try making the guitar from scratch. I'm glad I did because I'm really happy with the results. I printed off a picture of a guitar, cut it out, and traced around it onto styrene to make the body and neck. The strings are fishing line glued on, and the tuning pegs are little nails. The rest of the knobs, pickups, and other details were sculpted. The guitar strap is just a piece of pink ribbon.](userimages/customs/49500/49388-1.jpg) Hypno-Hustler Marvel Legendsby Rabid_EwokHere's the first half of my "Fearsome Fros" 2-pack from CustomCon 34. I started with a Marvel Legends Angel, with the standard shoulder fix...6 comments |
![[Angar the Screamer] Here's the second half of my "Lethal Larynxes" 2 pack from CustomCon 34. I started with a DC Universe Classics El Dorado for the base body. The head is from the Marvel Legends Magneto that came in the X-Men boxset; the one with the open mouth. The fringe on his vest and boots was cut from a cheap blue tablecloth. The hair, and the rest of his costume were sculpted with Apoxie.](userimages/customs/49500/49352-1.jpg) Angar the Screamer Marvel Legendsby Rabid_EwokHere's the second half of my "Lethal Larynxes" 2 pack from CustomCon 34. I started with a DC Universe Classics El Dorado for the base body. ...7 comments | ![[Screaming Mimi] Here's one half of my "Lethal Larynxes" 2-pack from CustomCon 34. The base body is a DC Universe Classics Dove, with an open left hand from a DC Universe Classics Cheetah, and a Toybiz Marvel Legends Phoenix head. The spikey things around her ankles and neck were cut from thin plastic. Her hair, and the edges of her leggings and gloves were sculpted.](userimages/customs/49500/49351-1.jpg) Screaming Mimi Marvel Legendsby Rabid_EwokHere's one half of my "Lethal Larynxes" 2-pack from CustomCon 34. The base body is a DC Universe Classics Dove, with an open left hand from...4 comments |
![[Blackout] I used a DCUC Black Adam for the base to help avoid paint rub. I swapped out the lower arms and lower legs for those from the DCUC blue/black Aquaman figure. The head is a cast of ML Absorbing Man's head. The mask and boot cuffs are made from styrene and Apoxie Sculpt, and the belt and lightning bolt on his chest are sculpted with Apoxie. The two "Darkforce" disks that attach to his feet are just black action figure stands.](userimages/customs/48500/48458-1.jpg) Blackout Marvel Legendsby Rabid_EwokI used a DCUC Black Adam for the base to help avoid paint rub. I swapped out the lower arms and lower legs for those from the DCUC blue/black Aquaman...3 comments | ![[Silver Sable] The base body is a Marvel Legends Maria Hill from head to toe. Her hair, the tops of her boots and gloves, the straps on her costume, and all those little knives are sculpted with Apoxie Sculpt. Her guns are just the Maria Hill guns painted silver. I made a holster for the pistol out of some thin plastic from an action figure package bubble. Finally, the ends of her headband that come out the back of her hair are just the sash from a 2 pack Elektra.](userimages/customs/47500/47270-1.jpg) Silver Sable Marvel Legendsby Rabid_EwokThe base body is a Marvel Legends Maria Hill from head to toe. Her hair, the tops of her boots and gloves, the straps on her costume, and all those l...10 comments |
![[Mantis] For the base body I used a DC Universe Classics Cheetah figure. Since Mantis was a little shorter than the other Avengers I cut a little out of the arms, legs, and stomach to bring down the figures height just slightly. I swapped out her left hand for a fist from a DC Universe Classics Dove. The head is a Marvel Legends Maria Hill head cast. The hair is partly Marvel Legends Psylocke’s, with lots of extra sculpting. Her antennae are just black twist ties. Those weird things coming off her costume in front of her shoulders are styrene. The skirt was cut from a cheap table cloth, and the belt is notebook vinyl with a styrene belt buckle. The rest of the costume details were sculpted.](userimages/customs/46500/46487-1.jpg) Mantis Marvel Legendsby Rabid_EwokFor the base body I used a DC Universe Classics Cheetah figure. Since Mantis was a little shorter than the other Avengers I cut a little out of the ar...5 comments | ![[Satana the Devil's Daughter] This is the fourth and final figure from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Cheetah with the head from a Marvel Legends Phoenix. The hair is a combination of DCUC Star Saphire’s hair and Apoxie Sculpt. The skull on her costume is from a Marvel Legends Mystique with thread and sculpted horns added. The rest of the costume details were sculpted.](userimages/customs/46000/45559-1.jpg) Satana the Devil's Daughter Marvel Legendsby Rabid_EwokThis is the fourth and final figure from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Che...3 comments |
![[Son of Satan Daimon Hellstorm] Here is another figure from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics El Dorado, with a DCUC Black Adam head, and a DCUC Dr. Impossible cape. Styrene was used for the boots and the top of the staff, and a dowel for the rest of the staff. Apoxie Sculpt was used to sculpt the hair and other details.](userimages/customs/46000/45558-1.jpg) Son of Satan Daimon Hellstorm Marvel Legendsby Rabid_EwokHere is another figure from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics El Dorado, with ...8 comments | ![[Goblin Queen] This was part of my entry in CustomCon 33, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Star Sapphire with the costume details sanded smooth. The right hand is from a DCUC Cheetah and the feet are from a Marvel Legends Storm. The head is from a Marvel Legends Phoenix, with sculpted hair. The loin cloth is cut from a Marvel Legend’s Elektra, and the cape is from Spider-Man Classics Morbius. The jewel on her chest is a jewelry bead. The rest of the costume was sculpted with Apoxie Sculpt.](userimages/customs/45500/45472-1.jpg) Goblin Queen Marvel Legendsby Rabid_EwokThis was part of my entry in CustomCon 33, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Star Sapphire with the c...8 comments |
![[Dormammu] This is one of the figures from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Captain Cold, with hands from DCUC Eclipso and Dr Midnite. The head is a Spider-Man Classics Spider-Man head with a sculpted face and flames from a Marvel Legends Human Torch. The rest of the costume was sculpted.](userimages/customs/45500/45471-1.jpg) Dormammu Marvel Legendsby Rabid_EwokThis is one of the figures from my CustomCon 33 entry, the Marvel Legends Demonic Forces series. The base body is a DC Universe Classics Captain Cold...6 comments | ![[Mockingbird] Recipe:
Marvel Legends Wasp body
Marvel Legends Ultimate Wolverine elbow joints
Marvel Legends Elektra (Hasbro) lower arms
Marvel Legends Psylocke feet
Marvel Legends Maria Hill head
DC Universe Classics Star Sapphire Wonder Woman hair
Apoxie Sculpt, styrene, & a dowel rod
The base body is a Marvel Legends Wasp with sculpted boot cuffs and casts of Marvel Legends Psylocke’s feet. I replaced the elbow joints with the larger elbows from a Marvel Legends Ultimate Wolverine. Below the elbows are the forearms and hands from a Hasbro 2-pack Elektra, with sculpted baggy sleeves. For the head, I used a Marvel Legends Maria Hill head cast with the hair from a DC Universe Classics Star Sapphire Wonder Woman. The hair on top was re-sculpted to better match Mockingbird's hairstyle. The mask is made from styrene, and her weapons are just pieces of dowel rod.](userimages/customs/44000/43849-1.jpg) Mockingbird Marvel Legendsby Rabid_EwokRecipe:
Marvel Legends Wasp body
Marvel Legends Ultimate Wolverine elbow joints
Marvel Legends Elektra (Hasbro) lower arms
Marvel Legends Psylocke fee...11 comments |
![[Moonstone] I started with a Ronan series Invisible Woman for the base body. The shoulder armor is made from thin styrene. I ground down the shoulders so that when I glued on the shoulder armor it would be flush with the rest of the body, then sculpted over the seams. The head is a Marvel Legends Phoenix head with hair from the first Legends Elektra and a sculpted helmet. The belt and gloves were also sculpted. The circle on her chest and the fin on her helmet are made from styrene.](userimages/customs/43000/42922-1.jpg) Moonstone Marvel Legendsby Rabid_EwokI started with a Ronan series Invisible Woman for the base body. The shoulder armor is made from thin styrene. I ground down the shoulders so that ...10 comments | ![[Eel] Not much to explain with this one. He’s just a Marvel Legends Angel with a Moon Knight head. I did remove the wing hinges and re-sculpt the back, though. I also fixed the shoulder joints, bringing the shoulders in closer to the body.](userimages/customs/43000/42545-1.jpg) Eel Marvel Legendsby Rabid_EwokNot much to explain with this one. He’s just a Marvel Legends Angel with a Moon Knight head. I did remove the wing hinges and re-sculpt the ba...2 comments |
![[Monica Rambeau Captain Marvel / Photon] Recipe:
DC Universe Classics Cheetah body
DC Universe Classics Dove fist
Marvel Legends Phoenix head
White cloth
Apoxie Sculpt
The base body for Monica is a DC Universe Cheetah. I used the version of Cheetah that already had black legs to avoid dealing with paint rub in those areas. That Cheetah figure originally had bare feet, so I swapped them for casts of the other Cheetah figures feet. I also gave her a right fist from a DC Universe Dove figure so she can punch the bad guys. The head is a cast of a Toybiz Marvel Legends Phoenix head with sculpted mask and hair. I also sculpted the boot cuffs. The wings (I guess that’s what you call those things) are made of cloth, and are hand sewn. To connect them to the figure, I tried to replicate what Hasbro did with the Banshee figure. I actually made a mold and cast one of the connecting pins from Banshee’s wings. I sewed a pin into each wing to connect them to the torso. The Cheetah figure’s arms were too small](userimages/customs/42000/41963-1.jpg) Monica Rambeau Captain Marvel / Photon Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Cheetah body
DC Universe Classics Dove fist
Marvel Legends Phoenix head
White cloth
Apoxie Sculpt
The base body for Moni...6 comments | ![[Moondragon] Recipe:
DC Universe Classics Cheetah body
Marvel Legends Maria Hill head
DC Universe Classics Mr. Miracle cape
Small jewelry rings for earrings
Apoxie Sculpt
Here’s my attempt at a classic Moondragon. I used a DC Universe Cheetah body as the base. I really like this base figure. I think the way the chest is sculpted is perfect for a character showing a lot of cleavage, like Moondragon. The head is from a Marvel Legends Maria Hill, with the top sanded down and smoothed out with Apoxie Sculpt. The earrings are just little necklace rings. The cape is from a DC Universe Mr. Miracle, which I had to trim down to fit properly on the smaller female body. The edges of her costume were sculpted with Apoxie Sculpt.](userimages/customs/41000/40888-1.jpg) Moondragon Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Cheetah body
Marvel Legends Maria Hill head
DC Universe Classics Mr. Miracle cape
Small jewelry rings for earrings
Apoxie...10 comments |
![[Typhoid Mary] Recipe:
Marvel Legends Ronan Series Invisible Woman body
Marvel Legends Phoenix head
Marvel Legends Series 4 Elektra lower arms/hands
Marvel Legends Psylocke lower legs
Marvel Legends Storm feet
Random fodder shoulder joint
Doll fishnet stockings
Spider-Man Classics Kraven swords
Stick from stick balloon
Styrene
Apoxie Sculpt
I started with a Ronan series Invisible Woman body. I replaced her lower arms and hands with those from a Toybiz Elektra, cut just above the wrist swivel, so that she could hold her swords. The lower legs come from a Marvel Legends Psylocke, cut just above the joint, and the high heeled feet are casts of Marvel Legends Storm’s.
For the coat, I first wrapped a piece of thin plastic around her torso,underneath the breasts. This formed the bottom edge of the coat, and gave me a base to sculpt on while still retaining the torso articulation. Since her coat only has one sleeve, and it is considerably baggy, I replaced her right elbow joint with a larger sho](userimages/customs/38500/38303-1.jpg) Typhoid Mary Marvel Legendsby Rabid_EwokRecipe:
Marvel Legends Ronan Series Invisible Woman body
Marvel Legends Phoenix head
Marvel Legends Series 4 Elektra lower arms/hands
Marvel Legends P...8 comments | ![[Whirlwind] Recipe:
DC Universe Classics Copperhead body
Marvel Legends series 4 Punisher head
Apoxie Sculpt
Styrene
The DC Universe Copperhead is the perfect base for this version of Whirlwind's costume, and there have been several Whirlwinds made using it since it came out. The body is all Copperhead, with various sculpted costume details. I wanted to have the eyes and mouth showing through the helmet, so there’s a Marvel Legends series 4 Punisher head cast underneath. The helmet fins and saw blades are styrene. Thanks for looking!](userimages/customs/38500/38302-1.jpg) Whirlwind Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Copperhead body
Marvel Legends series 4 Punisher head
Apoxie Sculpt
Styrene
The DC Universe Copperhead is the perfect ba...4 comments |
![[Water Wizard] Recipe:
Marvel Legends Sentinel series Angel body
Marvel Legends series 4 Punisher head
Apoxie Sculpt
I've wanted to make this guy for a while. Who doesn't love an orange and purple costume? Anyway, the body is a Marvel Legends Sentinel series Angel, with the wing hinges removed and the back re-sculpted. The head is from a Marvel Legends series 4 Punisher with sculpted mask and hair. The tops of the gloves and boots were also sculpted. Thanks for looking!](userimages/customs/38000/37610-1.jpg) Water Wizard Marvel Legendsby Rabid_EwokRecipe:
Marvel Legends Sentinel series Angel body
Marvel Legends series 4 Punisher head
Apoxie Sculpt
I've wanted to make this guy for a while. Who ...2 comments | ![[Razorfist] The base body is a DC Universe Hawkman with the wings removed and the back re-sculpted. The head is from a Marvel Legends series 4 Punisher. The knife hands were constructed using hi liter tubes for the bases, and styrene for the blades. I added wrist swivel joints from another figure at the base of each knife so that they can be turned. The costume was sculpted. Thanks for looking!](userimages/customs/37500/37177-1.jpg) Razorfist Marvel Legendsby Rabid_EwokThe base body is a DC Universe Hawkman with the wings removed and the back re-sculpted. The head is from a Marvel Legends series 4 Punisher. The kni...3 comments |
![[Mockingbird] Recipe:
Marvel Legends Wasp body
Marvel Legends Psylocke feet
Marvel Legends 2 pack Elektra lower arms
Marvel Legends Maria Hill head
Marvel Legends Gambit staff
Marvel Legends Longshot hair
Thin plastic
Apoxie Sculpt
Seeing all the modern Mockingbird’s that have been done recently, I got in the mood to make a classic version. The base body is a Marvel Legends Wasp. I replaced the feet with casts of Psylocke’s feet. I needed hands that could hold her staves, so I replaced the lower arms with those from a 2 pack Elektra. The head is from a Maria Hill figure, with the hair re-sculpted, and a ponytail made from part of Longshot’s hair. The mask is thin plastic. The boot cuffs, waist, sleeves, and the top edge of her costume are all sculpted. Finally, her staves were cut from Gambit's staff.](userimages/customs/36500/36297-1.jpg) Mockingbird Marvel Legendsby Rabid_EwokRecipe:
Marvel Legends Wasp body
Marvel Legends Psylocke feet
Marvel Legends 2 pack Elektra lower arms
Marvel Legends Maria Hill head
Marvel Legends G...9 comments | ![[Wonder Man (2nd Costume)] Recipe:
DC Universe Classics Mr. Miracle
DC Universe Classics Aquaman head
Apoxie Sculpt
I had a Mr. Miracle figure and was looking for something to make out of it when I came across this version of Wonder Man. It’s his second costume, which he only wore for a handful of issues. I admit I’d never seen it before, but I love the old bright spandex costumes like this. Plus, the color scheme matched that of the Mr. Miracle figure. The head is the short haired Aquaman head with the hair sanded down. The visor, straps, belt, & armbands are all sculpted.](userimages/customs/36500/36296-1.jpg) Wonder Man (2nd Costume) Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Mr. Miracle
DC Universe Classics Aquaman head
Apoxie Sculpt
I had a Mr. Miracle figure and was looking for something to ...14 comments |
![[Blizzard] Recipe:
DC Universe Classics Dr. Impossible body
Marvel Legends Moon Knight head
Styrene, zip ties, & googly eyes
Apoxie Sculpt
The base body is a DCUC Dr. Impossible with a ML Moon Knight head. The boot cuffs, glove cuffs, and straps are sculpted. The backpack is a combination of styrene, zip ties, and googly eyes. I took a little creative license with the design of the backpack.](userimages/customs/36000/35904-1.jpg) Blizzard Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Dr. Impossible body
Marvel Legends Moon Knight head
Styrene, zip ties, & googly eyes
Apoxie Sculpt
The base body is ...4 comments | ![[Blizzard] Recipe:
DC Universe Classics Blue Superman
Marvel Legends Moon Knight head
Apoxie Sculpt
I was working on a couple other customs that involved more sculpting, when I got the itch to just paint something. That’s why I made Blizzard. The assembly and sculpting were very quick, so I could get on with the painting. The base is a DCUC Blue Superman with a ML Moon Knight head. The boot and gloves cuffs were sculpted.](userimages/customs/36000/35903-1.jpg) Blizzard Marvel Legendsby Rabid_EwokRecipe:
DC Universe Classics Blue Superman
Marvel Legends Moon Knight head
Apoxie Sculpt
I was working on a couple other customs that involved more s...7 comments |
![[The Flaming C] Recipe:
DC Unvierse Classics All Star Superman
Marvel Legends Quicksilver wrists
DC Universe Classics Batman arm spikes
Marvel Legends Iron Fist energy accessory
Doll fishnet stockings
Thin plastic
Necklace chain
Apoxie Sculpt
This was my gift for Fwoosh’s 2011 custom Secret Santa. The base body is an All Star Superman. The head is the original Superman head with sculpted hair and beard, and a visor made from Apoxie and clear plastic. The little spikes on the back of his neck are from a DCUC Batman's wrists. The cape is also the original Superman cape, with the right third removed. The epaulette on the right shoulder is made from thin plastic and Apoxie. At one end, I folded a portion of the plastic around a small nail to create a hinge, then sculpted the nail into the lower neck. When the right arm is raised, the epaulette flips up.
In order to keep some form of wrist articulation, I replaced the original wrists with ones from a Marvel Legends Quicksilver. I cut off t](userimages/customs/36000/35694-1.jpg) The Flaming C Marvel Legendsby Rabid_EwokRecipe:
DC Unvierse Classics All Star Superman
Marvel Legends Quicksilver wrists
DC Universe Classics Batman arm spikes
Marvel Legends Iron Fist energ...15 comments | ![[Sersi] Recipe:
Marvel Legends Spider Woman body
Marvel Legends Sharon Carter head
Marvel Legends Psylocke hands
Apoxie Sculpt
Sersi started out as a ML Spider Woman. First, I replaced those huge Spider Woman hands with smaller ones from Psylocke. Then I re-sculpted the breasts and stomach. I'm not sure what it is exactly but I've never liked the stomach on the ML Spider Woman. Its funny because the ML Wasp, which is pretty much the same body, looks fine to me. Anyway, I ended up just sculpting over the whole stomach. I lost the torso articulation, but I felt it was a fair trade off to make her look better. The head is a Sharon Carter head with the hair re-sculpted. The edges of her costume were also sculpted.](userimages/customs/36000/35527-1.jpg) Sersi Marvel Legendsby Rabid_EwokRecipe:
Marvel Legends Spider Woman body
Marvel Legends Sharon Carter head
Marvel Legends Psylocke hands
Apoxie Sculpt
Sersi started out as a ML Spid...4 comments |
![[Random] Recipe:
2008 Movie Hulk body
Toybiz ML Nick Fury head
Hasbro ML Elektra sash
Wrestling figure boots
Magic marker tubes
Wire
Apoxie Sculpt
Thin plastic
I started with a 2008 Movie Hulk for the body. That Hulk figure had bare feet which I wanted for another custom, so I cut the legs off just below the knees and replaced them with boots from a wrestling figure I had no use for. Then I completely sculpted over the boots, most of the pants, and sculpted his vest. The head is from a Toybiz ML Nick Fury, with a sculpted do-rag and a sash from an ML Elektra. The glasses were made from thin plastic and wire. The cannon arm was built out of three marker tubes then sculpted over with Apoxie.](userimages/customs/35000/34635-1.jpg) Random Marvel Legendsby Rabid_EwokRecipe:
2008 Movie Hulk body
Toybiz ML Nick Fury head
Hasbro ML Elektra sash
Wrestling figure boots
Magic marker tubes
Wire
Apoxie Sculpt
Thin plastic...14 comments | ![[First Appearance Deadpool] Recipe:
DCUC Orion body
DCUC Dr Impossible head
DCUC Black Batman hands
ML10 Angel lower legs
ML4 Elektra swords and sheaths
Dollar store figure weapons
Apoxie Sculpt
Here's my first foray into the world of Deadpool customs, based on his first appearance in New Mutants #98, way back in 1991. I started with a DCUC Orion. I cut off the lower legs, about mid calf, and replaced them with the lower legs and feet of a Marvel Legends Angel. I think shape-wise the Angel feet look more like Liefeld's artwork than the standard DCUC feet. They're a little smaller than the DC feet, but not so small that they look outrageous on the figure. I think its a good compromise between trying to match Liefeld's tiny feet and having something that looks good on the figure. The head is a DCUC Dr Impossible head with the mask sculpted. The rest of the costume details (belt, pouches, straps) are sculpted. The guns are all from dollar store figures, which I painted silver. The knife is a combination of a knife](userimages/customs/34000/33772-1.jpg) First Appearance Deadpool Marvel Legendsby Rabid_EwokRecipe:
DCUC Orion body
DCUC Dr Impossible head
DCUC Black Batman hands
ML10 Angel lower legs
ML4 Elektra swords and sheaths
Dollar store figure weapo...6 comments |
|