![[Gandrayda] Again another tribute to Batman 1016, his Gandrayda is the best out there. I made this figure to complete my collection of the bounty hunters seen in Metroid Prime 3 Corruption. I didn't have a figure that was see through to use for her so I did what I could to create the affect I wanted on her. Very little work on this one just sculpting her rather odd hair if you can call it that, and some very meticulas and carefull painting.](userimages/customs/25500/25224-1.jpg) Gandrayda Metroidby metroid primeAgain another tribute to Batman 1016, his Gandrayda is the best out there. I made this figure to complete my collection of the bounty hunters seen in ...2 comments | ![[Rundas] I'm back, it was a lot more time consuming to make my two recent figures than I thought, but back to business. I recently found Batman 1016 Rundas on here and decided to make one for my Metroid collection. I used the Halo enemy figure for my base. I had my Grandpa cut all of his armor of for me and thin down some of the parts on his legs. Then I completely sculpted a new head for him and his shoulder plates, oh, I can't forget about his feet or his ice guns. I painted him with a mix of dark blue and a silver to make it look like there were particles of ice on him. Unfortunately it doesn't really show up in the pictures. All the white on him is the frost I thought he should have on him being a master of ice. He was a really fun custom to make and I think he fits in well with my other Metroid figures.](userimages/customs/25500/25223-1.jpg) Rundas Metroidby metroid primeI'm back, it was a lot more time consuming to make my two recent figures than I thought, but back to business. I recently found Batman 1016 Rundas on ...0 comments |
![[Kingdom Hearts Ventus] Trying to expand my KH collection, this time with a custom Ventus. I sculpted his armor on him and completely sculpted his keyblade. I then painted him to match the design of Ventus. Overall he came out well. In one of the pictures you see little white dots but those are not on the figure, it was due to the lighting from the sun. Your comments are what keep me going so please let me know what you think. God Bless](userimages/customs/25000/24976-1.jpg) Kingdom Hearts Ventus Kingdom Heartsby metroid primeTrying to expand my KH collection, this time with a custom Ventus. I sculpted his armor on him and completely sculpted his keyblade. I then painted hi...1 comments | ![[The Dark Keyblade] This is a custom accessory for my Riku figure. I created his Dark Keyblade so he can duel with my Sora figure, in case you were wondering the circled Keyblade is the one that was customized. The only base I had was a piece of cardboard cut into the proper shape and then apoxied over. I am making more keyblades for your viewing but this is the only one that I have completely finished. Let me know what you think, your comments are always appreciated. God Bless](userimages/customs/25000/24842-1.jpg) The Dark Keyblade Kingdom Heartsby metroid primeThis is a custom accessory for my Riku figure. I created his Dark Keyblade so he can duel with my Sora figure, in case you were wondering the circled ...1 comments |
![[Kingdom Hearts Ventus] This was a very hard figure to make for my collection, I needed a figure that was shorter than the rest of my figures, in the end it was my mother that said to use wolverine. How perfect was that, how could I not have seen that he was the perfect for the job. Here he is finished and ready for your viewing, let me know what you think, and thanks again to yamivash 0 for his support. Your comments are always appreciated. God bless](userimages/customs/25000/24825-1.jpg) Kingdom Hearts Ventus Kingdom Heartsby metroid primeThis was a very hard figure to make for my collection, I needed a figure that was shorter than the rest of my figures, in the end it was my mother tha...1 comments | ![[Aqua] I know, again with the Kingdom Hearts figures, but I am such a diehard fan that I wanted a 3.75" scale to add to my collection. The head unfortunately has no articulation since it was sculpted right on the body, also I sculpted her keyblade which was the hardest part to me because of the amount of detail on such a small object. I made a whole collection of the 3.75" figures for my collection. Thanks for the look and a shout out to Yamivash 0 who gave me the encouragement to continue, thanks man. God Bless](userimages/customs/25000/24823-1.jpg) Aqua Kingdom Heartsby metroid primeI know, again with the Kingdom Hearts figures, but I am such a diehard fan that I wanted a 3.75" scale to add to my collection. The head unfortun...0 comments |
![[Namine] I am a collector of the Kingdom Hearts figures but after I got the figure I found out it was broken so I turned it into a Namine. I sculpted her clothes on and repaired her leg which was the broken part, but it has now lost all of its articulation. I also sculpted her pad and four crayons, so that way I just didn't paint and repair her to turn her into the character I wanted. I'm looking for your support, should I stop posting customs or do you feel I am good enough to continue, please tell me. Your comments are always appreciated and thanks for the look. God Bless](userimages/customs/25000/24741-1.jpg) Namine Kingdom Heartsby metroid primeI am a collector of the Kingdom Hearts figures but after I got the figure I found out it was broken so I turned it into a Namine. I sculpted her cloth...6 comments | ![[Puck] Here is my latest custom, Puck of the Alpha Flight. When I saw her I found her to be a very interesting and cool character, so I decided to make her for my collection. I sculpted on her pants, but in the process elliminated the articulation at the top of the leg. Her hair was also sculped on very carefully. She retained all the other original points of articulation. Your comments are always appreciated and thanks for the look. I'm sorry for the paint missing in some spots, I only noticed it after I took the pictures. God Bless](userimages/customs/25000/24726-1.jpg) Puck Marvel Legendsby metroid primeHere is my latest custom, Puck of the Alpha Flight. When I saw her I found her to be a very interesting and cool character, so I decided to make her f...0 comments |
![[Little Birdie/Baby Ridley] I thought that the Baby Ridley was really cute in Metroid other M so after I was done with the Apoxie I used what was left over to make this Little Birdie. I used poseable wire for his legs and sculted his feet into the bottom of the wire. I didn't paint him just left him the way he was. Isn't he cute. Thanks for the look, and your comments and critiques are always appeciated. God Bless.](userimages/customs/25000/24698-1.jpg) Little Birdie/Baby Ridley Metroidby metroid primeI thought that the Baby Ridley was really cute in Metroid other M so after I was done with the Apoxie I used what was left over to make this Little Bi...1 comments | ![[Red Hulk] My friend Galactape wanted me to make a Red Hulk for him. I took up the challenge, and here is the end result. A lot of work went into him, I sculpted his face and the muscles. His muscles are hollow, to reduce the clay being used I made them hollowmade them thin and then rapped them around the arms and legs. The Marvel Legends Savage Green Hulk is courtesy of Galactape my photographer. Thanks for the look, and I would appreciate any critiques or comments you have. Thank You and God Bless.](userimages/customs/25000/24697-1.jpg) Red Hulk Marvel Legendsby metroid primeMy friend Galactape wanted me to make a Red Hulk for him. I took up the challenge, and here is the end result. A lot of work went into him, I sculpted...1 comments |
![[Master Xehanort] This was a figure that took a lot of consideration. I had to find a figure that was bald, could hunch over and was super-poseable. I sculpted all of his clothes on which was very hard to do while maintaining poseability. Over all I don't think he came out bad, I painted his eyes gold but you can't see it in the pictures unfortunately. I know his keyblade isn't finished but I wanted you to see his keyblade and see how hard it was to make. Your comments are alwys appreciated. God Bless.](userimages/customs/25000/24560-1.jpg) Master Xehanort Kingdom Heartsby metroid primeThis was a figure that took a lot of consideration. I had to find a figure that was bald, could hunch over and was super-poseable. I sculpted all of h...2 comments | ![[Terra] I wanted to make some 3.75" scale Kingdom Hearts people to use for my enjoyment. It was hard for me to find a figure taller than the average ones to turn into Terra. A chance visit to Target allowed me to see the Titanium man for the Iron man figure series and it was as if fate was on my side. I completely handsculpted the armor, I used tin foil to make his shoulde pads so his arms could still move, and I also used on the fins on his helmet. I painted him with metallic colors to give him the appearance of armor. I tried to make him as game accurate as possible, I am working on his keyblade and I will have pictures on here soon. Your comments are always appreciated. God Bless.](userimages/customs/25000/24559-1.jpg) Terra Kingdom Heartsby metroid primeI wanted to make some 3.75" scale Kingdom Hearts people to use for my enjoyment. It was hard for me to find a figure taller than the average ones...1 comments |
![[The Living Tribunal] This was the first custom that I made as a request from my friend Galactape. He told me to make it out of 12" GI Joes, so I used one whole figure as the base and cut half of the heads of two others and monster glued them to the head of the main figure. I used fabric from the shirt of another figure as his hood, cutting it where necessary but also glueing it to the heads. After a ton of gold paint and the detail work your have the figure in these pictures, I hope you like him and your comments are always appreciated. God Bless.](userimages/customs/24500/24408-1.jpg) The Living Tribunal Marvelby metroid primeThis was the first custom that I made as a request from my friend Galactape. He told me to make it out of 12" GI Joes, so I used one whole figure...0 comments | ![[Kingdom Hearts Vanitas] Okay so this isn't my first attempt at a 3.75" figure but this is the first figure that I have completely sculpted. There is almost nothing left of the original figure, I had to make strands of clay about equal in length and size in order to complete this guy. The red detail work was not painted on it was sculpted, as was his keyblade. The only base for the keyblade was a piece of cardboard, I used my pocket knife to cut it out and you wouldn't believe how hard that is, the details in the keyblade like the holes in the top were very hard to cut out. I hope you like him, he is now the pride of my collection, so please tell me what you think of him, or if there are any ways to improve my work. Thanks for the look, and your comments are always appreciated. God Bless.](userimages/customs/24500/24384-1.jpg) Kingdom Hearts Vanitas Kingdom Heartsby metroid primeOkay so this isn't my first attempt at a 3.75" figure but this is the first figure that I have completely sculpted. There is almost nothing left ...1 comments |
![[X-23] Hi, I made this X-23 in her x-force uniform, handpainted, I thought that she came out well. But the point I like about her the most is the metal claws I gave her, she is gonna use those claws to get Sabretooth ha ha ha. I would like to thank my camera man Galactape for his excellent pictures.](userimages/customs/24500/24307-1.jpg) X-23 Marvel Universeby metroid primeHi, I made this X-23 in her x-force uniform, handpainted, I thought that she came out well. But the point I like about her the most is the metal claws...1 comments | ![[Cloak and Dagger] Hi, I think Cloak and Dagger are really cool so I decided to make a Marvel Universe scale for them. I hand painted both of them but I did use a little bit of clay on Dagger. They are ready to stop crime in New York hope you enjoy and your comments are always appreciated. Sorry for my finger in the way, my pictures are done by my close friend Galactape.](userimages/customs/24500/24306-1.jpg) Cloak and Dagger Marvel Universeby metroid primeHi, I think Cloak and Dagger are really cool so I decided to make a Marvel Universe scale for them. I hand painted both of them but I did use a little...0 comments |
![[Kingdom Hearts Aqua] As promised here is the main girl of the new Kingdom Hearts, Aqua. All of her armor was sculpted on and hand painted with metallic paints to give it the appearance of armor. Her keyblade was hand sculpted and again painted with Metallics to give it a shine. Thanks for the look and please, please give me some kind of comment, I have posted a couple of figures on here but I almost have no comments. God Bless and Thanks for the look.](userimages/customs/24500/24250-1.jpg) Kingdom Hearts Aqua Miscby metroid primeAs promised here is the main girl of the new Kingdom Hearts, Aqua. All of her armor was sculpted on and hand painted with metallic paints to give it t...0 comments | ![[Kingdom Hearts Terra] I am a die hard fan of Kingdom Hearts and felt the strong urge to make the main characters from the game. I started with Terra my favorite, every inch of armor was sculpted on him and his keyblade was also sculpted. I used tin foil on his shoulder plates and the fins on his helmet to keep them straight. I let my friends judge him and they thought he was cool so please let me no what you think of him. Your comments are appreciated and thanks for the look.](userimages/customs/24500/24180-1.jpg) Kingdom Hearts Terra Miscby metroid primeI am a die hard fan of Kingdom Hearts and felt the strong urge to make the main characters from the game. I started with Terra my favorite, every inch...0 comments |
![[X-Men Prodigy] I was looking for an ubscure(pardon spelling) X-Men figure to make when I saw Prodigy. I thought he was pretty cool looking so I made him. I sculpted on his shades and his hair and painted his cloak, first with white then a metallic silver to give it a shiny look. Thanks for the look and comments are appreciated.](userimages/customs/24500/24157-1.jpg) X-Men Prodigy Marvel Legendsby metroid primeI was looking for an ubscure(pardon spelling) X-Men figure to make when I saw Prodigy. I thought he was pretty cool looking so I made him. I sculpted ...0 comments | ![[Hercules] I hate Hercules, but I figured(no pun intended) that I would make one to add to my collection. I based this costume after his classic duds, sculpting his leg bands and hair. You wouldn't believe how ugly those wrestler figures are so it was no easy task to sculpt and paint a face on him. Thanks for looking, and comments are appreciated.](userimages/customs/24500/24156-1.jpg) Hercules Marvel Legendsby metroid primeI hate Hercules, but I figured(no pun intended) that I would make one to add to my collection. I based this costume after his classic duds, sculpting ...1 comments |
![[Fire Emblem Nephenee] Nephenee is my favorite character in Fire emblem so I decided to add er figure to my collection. I sculpted all of her armor on and cut off some of her hair to match Nephenee's and then sculpted the helmet on. To me its to bad there is no actual Fire emblem figure line, but I will try my best to dish out more Fire emblem figures for your veiwing in the future. Thanks for the look.](userimages/customs/24500/24121-1.jpg) Fire Emblem Nephenee Miscby metroid primeNephenee is my favorite character in Fire emblem so I decided to add er figure to my collection. I sculpted all of her armor on and cut off some of he...0 comments | ![[Fire Emblem Ike] I am a fan of the Fire Emblem games but I hate the figures they have. So I took a Dante took of his helmet and hakama and completely sculpted his armor and hair. I hand painted his face, it was my first attempt at free-handing a face but I think it went okay, practice makes perfect. Thanks for the look.](userimages/customs/24500/24120-1.jpg) Fire Emblem Ike Miscby metroid primeI am a fan of the Fire Emblem games but I hate the figures they have. So I took a Dante took of his helmet and hakama and completely sculpted his armo...0 comments |
![[Professor Xavier] I was tired of the Marvel Universe line coming out with every X-men except Professer Xavier. So I took it upon myself to create one for your viewing. I hope you enjoy. Thanks for the look.](userimages/customs/24500/24090-1.jpg) Professor Xavier X-Menby metroid primeI was tired of the Marvel Universe line coming out with every X-men except Professer Xavier. So I took it upon myself to create one for your viewing. ...6 comments | ![[Psylocke] Just a repaint of the Marvel Universe Ms. Marvel. I gave her a custom paint job to be Psylocke in my X-men figure collection. Hope you enjoy, thanks for looking](userimages/customs/24500/24088-1.jpg) Psylocke X-Menby metroid primeJust a repaint of the Marvel Universe Ms. Marvel. I gave her a custom paint job to be Psylocke in my X-men figure collection. Hope you enjoy, thanks f...0 comments |
![[Ghor] This was a very triky figure to make, there was no base figure I could possibly think of to use. Looking through my figure bin I came across a few droid figures, I cut them up and used the torso of one the arms of another and used all three of the droids to make his legs.I used some lego Bionicle parts for the armor on his legs. He was completely scratch built with no figure as the base, I gave him articulation and sculptred his head which also has poseability. Thanks for the look. I will be posting more customs from the Metroid games.](userimages/customs/24500/24058-1.jpg) Ghor Metroidby metroid primeThis was a very triky figure to make, there was no base figure I could possibly think of to use. Looking through my figure bin I came across a few dro...1 comments | ![[Samus Aran] This figure required a lot of Aves. the whole suit of armor was sculpted on and all the detail was done based on her armor in Metroid other M. Having Metroid figures what would my collection be with out a Samus. A friend of mine mentioned to me that the Klaw would be a perfect base for a Samus the outline for a cannon is already there. Brilliant idea, kudos to my friend.](userimages/customs/24500/24057-1.jpg) Samus Aran Metroidby metroid primeThis figure required a lot of Aves. the whole suit of armor was sculpted on and all the detail was done based on her armor in Metroid other M. Having ...1 comments |
![[Anthony Higgs] Again another paint job to match the Federation Marine armor. I used Aves to sculpt the helmet again but it was a little trickier with this body because his body mass was a lot bigger than Dukes. I sculpted on his chain gun to match the plasma cannon he uses in the game. Enjoy, and thanks for looking.](userimages/customs/24500/24031-1.jpg) Anthony Higgs Metroidby metroid primeAgain another paint job to match the Federation Marine armor. I used Aves to sculpt the helmet again but it was a little trickier with this body becau...2 comments | ![[Adam Malkovich] I gave the movie Duke a custom paint job to match the Federation Marines seen in Metroid other M. It took a while to think of the right head to use but I think I got it right. His helmet was sculpted out of the Aves Apoxie Sculpt and his gun came from the Cover Girl figure. Thanks for looking.](userimages/customs/24500/24030-1.jpg) Adam Malkovich Metroidby metroid primeI gave the movie Duke a custom paint job to match the Federation Marines seen in Metroid other M. It took a while to think of the right head to use bu...1 comments |
|