![[Graveyard Diorama] Ok for this one i wanted it to go with archangel but he became my archenemy! i gave him so many paints but it just didnt look right to me. anyways this is scratch built with one little piece a tombstone i guess given to me by galactape in a trade. length is 7.5 inches, width is 5.5 inches and the height is 5 inches. any feedback is greatly appreciated thanks guys!](userimages/customs/33500/33254-1.jpg) Graveyard Diorama Dioramaby mmdiegoOk for this one i wanted it to go with archangel but he became my archenemy! i gave him so many paints but it just didnt look right to me. anyways thi...8 comments | ![[Battlefield Base] I wasnt sure what to put for height but its like 7 inches long. sculpted the ground and added skeleton parts i had laying around and mixed it in with swords that are removable from the skeleton bodies and skulls. They could be rearranged in any oreder. Painted it and put blood smears on the weapons for a dramatic effect. hope you guys like it and tell me what you think, good or bad :)](userimages/customs/33000/32644-1.jpg) Battlefield Base Originalby mmdiegoI wasnt sure what to put for height but its like 7 inches long. sculpted the ground and added skeleton parts i had laying around and mixed it in with ...8 comments |
![[Cyclops with Base] i didn't really do anything to cyclops just sculpted the base and did some painting.](userimages/customs/33000/32611-1.jpg) Cyclops with Base | ![[Flare Gambit with Diorama] I got a gambit who was in a fight and lost some of his fingers so i had to resculpt them and he had a busted up jacket so i asked jack sparrow if i could borrow his and of course he didn't put up a fight (boils up some water) then i sculpted him a collar and a slit on his back to hold his staff. Gave him a repaint and added the xmen symbol to his jacket. Also made the diorama from scratch and the crate is a random part i found. Thanks for viewing and hope you guys like it.](userimages/customs/33000/32610-1.jpg) Flare Gambit with Diorama X-Menby mmdiegoI got a gambit who was in a fight and lost some of his fingers so i had to resculpt them and he had a busted up jacket so i asked jack sparrow if i co...12 comments |
![[Apocalypse] Apocalypse from the X-Men is 3.75 inches tall with a custom diorama. Which I totally forgot to take a picture of before I painted it. He has two exchangable weapons. 1 sword that was hand painted and 1 weapon that was also painted. One corner of the diorama has a bit of a lift from not baking correctly but still holds the figure in place.](userimages/customs/32000/31713-1.jpg) Apocalypse X-Menby mmdiegoApocalypse from the X-Men is 3.75 inches tall with a custom diorama. Which I totally forgot to take a picture of before I painted it. He has two excha...12 comments | ![[Scorpion] Sculpted most of the figure and random parts. more sculpting was done then shown in pictures. Has Removable pieces and swap-able heads. and metal swords and spear. Caution swords and spear are sharp.](userimages/customs/31000/30982-1.jpg) Scorpion Mortal Kombatby mmdiegoSculpted most of the figure and random parts. more sculpting was done then shown in pictures. Has Removable pieces and swap-able heads. and metal swor...21 comments |
![[Scorpion] Took a gi joe then did some sculpting and painted him. then took spare part i had painted it up and added some accessories to make it into his base. he stands 4in tall with out base and 9 in tall with base](userimages/customs/30500/30213-1.jpg) Scorpion Mortal Kombatby mmdiegoTook a gi joe then did some sculpting and painted him. then took spare part i had painted it up and added some accessories to make it into his base. h...4 comments | ![[Optimus Primal] just a simple repaint then added led lights and some extra add ons to make him look cooler head fips up batteries are exchangeable and maximal logo is under the head](userimages/customs/30500/30016-1.jpg) Optimus Primal |
![[Scorpion] sculpted his mask and most of his Armour. then added spare parts to him. and painted him and all his accessories. everything was sealed for protection.](userimages/customs/30000/29781-1.jpg) Scorpion Mortal Kombatby mmdiegosculpted his mask and most of his Armour. then added spare parts to him. and painted him and all his accessories. everything was sealed for protection...9 comments | ![[Master Splinter] we took a random figure we found but we dont know who it was and did a head swap and also swabbed the hands and feet. then we made a joint so the tail could attach and rotate 360 degrees. then we was painted to look dark. and we sculpted bandages for his hands and feet. and painted a spear for him to hold that we took from a spawn figure. comments are greatly appreciated](userimages/customs/30000/29503-1.jpg) Master Splinter |
![[Scorpion] i bought a random gi joe figure. did a head swap with a different gi joe and sculpted a mask and his leg band. added a pouch and a kunai that was repainted to match. made the spear out of wire and a knife and repainted to add effect. Also added a sword holder to his back with two swords that were painted to match as well. Then found a base to fit him. then i just did a total repaint to turn him into scorpion. comments are always appreciated.](userimages/customs/30000/29502-1.jpg) Scorpion Mortal Kombatby mmdiegoi bought a random gi joe figure. did a head swap with a different gi joe and sculpted a mask and his leg band. added a pouch and a kunai that was repa...2 comments | ![[Venom] I had this venom laying around but he was missing his tounge so i decided to make him one and it came out great in the end. But i didnt bother painting him or removing the paint someone already drew around his mouth because im trying to clean out my fodder bin.](userimages/customs/29500/29484-1.jpg) Venom Spider-Manby mmdiegoI had this venom laying around but he was missing his tounge so i decided to make him one and it came out great in the end. But i didnt bother paintin...4 comments |
![[Carnage] I made this figure a very very long time ago and never got around to posting him up. hes not much compared to the newest carnage i made. But he sure looks a lot better with the tentacles.](userimages/customs/29500/29483-1.jpg) Carnage Spider-Manby mmdiegoI made this figure a very very long time ago and never got around to posting him up. hes not much compared to the newest carnage i made. But he sure l...3 comments | ![[Baby Batgirl with Batcycle] We want to give props to Galatape for giving us a utility belt. Thanks buddy it really helped out a lot and made a difference.
My beautiful wife is getting better and better every time she makes a custom. She started with a Bratz Babyz and repainted her to look like the Batgirl all star. Sculpted a Batarang for her out of sculpety and made a cape out of fabric and painted it yellow to stiffen the cape up. Repainted the motorcycle black and added little yellow bats to it. She also put black highlights in her hair for more effect. The utility belt was given to us by Galatape and repainted yellow and readjusted to fit. The rims on the bike also have yellow stripes. I hope you guys like it.](userimages/customs/29500/29438-1.jpg) Baby Batgirl with Batcycle Batman Animatedby mmdiegoWe want to give props to Galatape for giving us a utility belt. Thanks buddy it really helped out a lot and made a difference.
My beautiful wife is ...2 comments |
![[Captain America in Mecha Suit] i took the captain america suit i made before and did some touch ups to the paint and cleaned up some details. then i made the gun on the top completely removable that way you can see them clearly when they are up there. i repainted the robot suit i found into the captain america colors and added more details and accessories to it and also added leds. and i repainted the captain america figure and the bucky figure to match the suit better. Comments are always appreciated](userimages/customs/29500/29435-1.jpg) Captain America in Mecha Suit Captain Americaby mmdiegoi took the captain america suit i made before and did some touch ups to the paint and cleaned up some details. then i made the gun on the top complete...3 comments | ![[Goku] Another simple repaint. I found this figure completely marked up and very scraped so i restored it back to its original state.](userimages/customs/29500/29413-1.jpg) Goku Dragonball Zby mmdiegoAnother simple repaint. I found this figure completely marked up and very scraped so i restored it back to its original state....4 comments |
![[Sexy Anime Girl] Kudos to bobtheodd for letting me know that this is Guillotina. Just a simple repaint of a anime girl i had laying around. and gave her a lot of details in her clothes and put some plastic wings on her back.](userimages/customs/29500/29412-1.jpg) Sexy Anime Girl Animeby mmdiegoKudos to bobtheodd for letting me know that this is Guillotina. Just a simple repaint of a anime girl i had laying around. and gave her a lot of detai...5 comments | ![[Baby Harley Quinn] This is a custom made baby harley quinn she is about 3.5 in high. the thing around her neck was redone to look like a babys bib and the things on her wrists were done like bracelets](userimages/customs/29500/29310-1.jpg) Baby Harley Quinn Batman Animatedby mmdiegoThis is a custom made baby harley quinn she is about 3.5 in high. the thing around her neck was redone to look like a babys bib and the things on her ...1 comments |
![[Malebolgia from Spawn] his is a custom done malebolgia this character is from spawn and he needed more detailing added so we fixed up one of his hands because it wasnt on properly. Then added blood dripping from his cuts.](userimages/customs/29500/29309-1.jpg) Malebolgia from Spawn Spawnby mmdiegohis is a custom done malebolgia this character is from spawn and he needed more detailing added so we fixed up one of his hands because it wasnt on pr...0 comments | ![[Baby Superman] i took a baby dora doll and repainted the skin then i painted on the superman costume with a twist to make it look more like feety pj's that babies wear and the superman logo is partly covered by his hand](userimages/customs/29500/29254-1.jpg) Baby Superman Supermanby mmdiegoi took a baby dora doll and repainted the skin then i painted on the superman costume with a twist to make it look more like feety pj's that babies we...0 comments |
![[Baby Supergirl] I had alot of fun making the wonder woman as a baby that i decided to make super girl as a baby. i took another doll from my daughter to make her dont worry she has more then enough toys. I painted her into the costume, then i sewed her a little cape. she didnt have it on yet in the picture though. this super girl is blowing a kiss. she was sealed for protection and she stands about 4.5in. keep your eye out for other baby super heros.](userimages/customs/29500/29214-1.jpg) Baby Supergirl | ![[Captain America with Bucky and Metal Mayham] This is a metal mayham suit that was re painted into captain americas colors. when we bought the suit it was very damaged from the back and it ws missing many peices. So the whole set up on the inside had remade to fit this particular captain america figure. The suit has two LED lights added that are powered by 3 AAA batteries that are easy to change. If you raise the right arm of the suit the gun has lights and shooting sound. we added the gun on the top. it moves up and down and swivels 360 degrees. also there are two stands on the top of the suit to hold buckys guns while he is using the other one. we added the stands the figures came with to give them places to stand. The seat that captain america sits in was stolen from our daughters barbie van then re shaped and designed a bit to fit in. the foot pedles were taken from 2 different speed racer cars. there are canteins and boxes added into the legs to turn it into a storage center. there is a place for captain america to hang his](userimages/customs/29500/29187-1.jpg) Captain America with Bucky and Metal Mayham Captain Americaby mmdiegoThis is a metal mayham suit that was re painted into captain americas colors. when we bought the suit it was very damaged from the back and it ws mis...6 comments |
![[Baby Wonder Woman] My wife Nicole stoled one of our daughters bratz dolls and turned her into a very cute wonder woman. She started off by repainting her with the wonder woman colors and painting the stars on the front and back of the her bottoms and making a tiara out of plastic and repainting it gold with a red star. Then she sanded down the toes so it would look like she had boots on. Then the lasso was weaved out of thin gaged yarn and turned into a rope that took a long time to make. Then she was carefully sealed for extra protection.](userimages/customs/29500/29173-1.jpg) Baby Wonder Woman Wonder Womanby mmdiegoMy wife Nicole stoled one of our daughters bratz dolls and turned her into a very cute wonder woman. She started off by repainting her with the wonder...3 comments | ![[Animated Harley Quinn Bust] We enjoyed making the last bust so we decided to give it another shot. this time we added a few different details to give her an animated look. The clothes were hand sewn and designed to fit this figure perfectly. The face was hand painted and then sealed. She was modeled after harley quinn from batman the animated series. We added a little shape to her lips to give her a bit of a clown feel. she is approximatively 9 inches tall and 16 inches across. Your comments are appreciated](userimages/customs/29000/28933-1.jpg) Animated Harley Quinn Bust Batman Animatedby mmdiegoWe enjoyed making the last bust so we decided to give it another shot. this time we added a few different details to give her an animated look. The cl...2 comments |
![[Maximum Carnage] This is a custom made carnage done by MMDiego. We used a carnage figure that we had laying around for the base figure, we hand painted him and added more detail by sculpting his suit. Then we took random swords, shields, pieces of plastic and wire to make the weapons and sculpted more detail into them. We also sculpted the face that is on the shield and the face pops out, then hand painted them all using a fine tipped brush to make it look like carnage made them using the suit. The base that he stands on was made from a reptile food dish that was completely redone and repainted. 4 LEDs and 4 skulls were added to give the base more affect. The LEDs run off of 3 button cell batteries that are easliy replaceable threw a hidden spot on the top of the base. The switch to turn the lights on is on the side and painted to it doesn't stick out. Both his hands pop on and off to be able to equip all his weapons and his weapons are interchangeable between both of his hands and they can all be turn](userimages/customs/29000/28651-1.jpg) Maximum Carnage Marvel Legendsby mmdiegoThis is a custom made carnage done by MMDiego. We used a carnage figure that we had laying around for the base figure, we hand painted him and added m...14 comments | ![[Dragonball Z Capsule Corp. 991] Capsule corp. 991 . We found this capsule corp. vechile in rough shape and decided to redo it. it has had touch ups done to all its paint and had a bit of costume paint added. We also replaced the two lights that it had with new bright white leds and then added 6 more leds on to it. we added a switch on the bottom to turn the lights on and off and there is a button on the top that makes sound effect. the wheels on the bottom fold in and out and the front door opens and closes but the plastic looks a bit foggy due to wear that we could not repair also there are a few sratch marks on the back thrusters that are only visible with the lights on. it runs on 2 AA batteries that are easily replaceable. Very awesome definatly a must have for a dragon ball fan.](userimages/customs/28500/28498-1.jpg) Dragonball Z Capsule Corp. 991 Dragonball Zby mmdiegoCapsule corp. 991 . We found this capsule corp. vechile in rough shape and decided to redo it. it has had touch ups done to all its paint and had a bi...6 comments |
![[Hulk] This hulk stands 12in. tall and about 6in. wide. He has rippling muscles and poping veins that glow in the dark. This awesome figure has been repainted with the highest quality paints to give him a darker and more fitting look and then he was sealed to preserve quality.Press the button on his stomach to hear hulk phrases and roaring sounds and if you squeeze his legs he has smashing action and his eyes light up. His eyes have also be done so they will glow in the dark. This figure is designed for display or gentle play. If handled roughly it can be damaged. this figure runs on 3 AAA batteries that are replaceable](userimages/customs/28500/28497-1.jpg) Hulk Marvelby mmdiegoThis hulk stands 12in. tall and about 6in. wide. He has rippling muscles and poping veins that glow in the dark. This awesome figure has been repainte...4 comments | ![[12" Combat Wolverine with Lights and Steel Cl] Hey everyone and thank you for visiting this one of kind custom. A lot of hours and hard work into sculpting, hand painting and hand sewing this custom with fine detail. We took a 12" G. I. Joe and painted him black with red details. then we took a vest and painted the Xmen logo on to it. after the walkie talkie was painted and had the logo added it was stitched on to the back of his vest. The belt around his waist came from a beast charater and was repainted and had an extention added to it to make it fit. The gun holder on the belt was also resculpted a bit to make the pistal fit properly.
The pistal and Riffle were painted black and dry burshed to give them a realistic affect. The band around his leg was taken from an old long shot figure then resized and painted to make it fit snug around his leg. the granades were painted and detailed to match the rest of the figure then glued into place. We drilled one of his hands to make spaces for his steel claws to be added. He only has](userimages/customs/26500/26386-1.jpg) 12" Combat Wolverine with Lights and Steel Cl X-Menby mmdiegoHey everyone and thank you for visiting this one of kind custom. A lot of hours and hard work into sculpting, hand painting and hand sewing this custo...1 comments |
![[Custom Green Goblin] Hey everyone and thank you for visiting this one of kind custom. MMDiego brings you high quailty customs. A lot of hours and hard work into sculpting, hand painting and hand sewing this custom with fine detail. We took a goblin figure that was based off the movie and redid him to give him a look that is some where between the movie goblin and the goblin from the 90's.
We added purple details to him on his head and armor, Also we added a brown bag that my wife sewed by hand for him to hold his pumpkin in because in the 90's thats how he did it but in the movies they came out of no where so we wanted to give him back that feature. The pumpkin was sculpted to be a perfect fit in his hand and it is removable to also be placed into his bag. The staff was designed for him with silver then added green accents and 4 metal spikes at the top of it, it was designed to be more fitting to this goblin but it is not removable. He is however able to come on and off of his glider.
His glider has a](userimages/customs/26500/26330-1.jpg) Custom Green Goblin Marvel Legendsby mmdiegoHey everyone and thank you for visiting this one of kind custom. MMDiego brings you high quailty customs. A lot of hours and hard work into sculpting,...6 comments | ![[Harley Quinn Bust 9x14in.] Custom One-Of-A-Kind hand sewn/hand painted Harley Quinn bust, She is made with a beautiful face and very nice suit that was custom to fit her. She measures 9in. high and 14in. from ear to ear. Her head can be turned from left to right. She has a painted face and mask but the full suit is made of fabric. Her outfit is not removable. She is not designed for play. She Is made by MMDiego Customs. I Did the painting and my lovely wife did the clothing.](userimages/customs/26500/26090-1.jpg) Harley Quinn Bust 9x14in. Batman Animatedby mmdiegoCustom One-Of-A-Kind hand sewn/hand painted Harley Quinn bust, She is made with a beautiful face and very nice suit that was custom to fit her. She me...0 comments |
|