![[Smallville Clark Kent the Blur Season 10] Hey guys. Been re-watching quite a bit of smallville lately so I thought I'd take a crack at the main man Clark Kent. I've also got a season 9 style blur in the works and he'll be done as soon as I get the right head for him. I hope to make a Tom Welling superman soon too, just as soon as I can get the right parts.
The dc direct smallville figures are a real pain to get so for Clark I had to improvise a little. The head is a NECA resident evil Leon Kennedy completely resculpted and repainted. The upper body is an X2 Wolverine also resculpted. I also brought out the S on his chest a little more than how it is on the show. The legs are a combination of a dcuc Jonah Hex upper legs and Mezco Peter Petrelli lower legs and feet from a Neca Hunger games figure.
thanks for looking!](userimages/customs/51000/50525-1.jpg) Smallville Clark Kent the Blur Season 10 DC Universeby thejado101Hey guys. Been re-watching quite a bit of smallville lately so I thought I'd take a crack at the main man Clark Kent. I've also got a season 9 style b...6 comments | ![[UDON Taskmaster] Hey guys, here is a custom that has just sat on my workbench for over a year now and I have finally just got on with it and I'm glad I did! Tasky is really becoming a popular custom, he is tones of fun to make except and looks fantastic next to deadpool on display! The base is a standard face off punisher with a iron spiderman head resculpted. Lots of fodder here and there and lots of sculpt for armor peices and such. For the hood, I covered the head in clingfilm and sculpted on top of it to make the hood then removed it once it was dry, making a fully sculpted romovable hood!
thanks for looking!](userimages/customs/49000/48845-1.jpg) UDON Taskmaster Marvel Legendsby thejado101Hey guys, here is a custom that has just sat on my workbench for over a year now and I have finally just got on with it and I'm glad I did! Tasky is r...11 comments |
![[Rick Grimes (Comic Book)] Hey guys. This Rick was made from an ROML3 punisher body with interchangeable sota remy heads. A lot of sculpting here and there. I also kept his hand on as he looked badass with the shotgun, so I guess you casn say this is pre-governor rick. A lot of sculpting on both heads. I gave him a look from the start of the comic and further into the apocalypse.
Thanks for looking :)](userimages/customs/48500/48455-1.jpg) Rick Grimes (Comic Book) Walking Deadby thejado101Hey guys. This Rick was made from an ROML3 punisher body with interchangeable sota remy heads. A lot of sculpting here and there. I also kept his hand...4 comments | ![[Carl Grimes] Hey guys. Today I present Carl Grimes of the walking dead tv series. He was made from a mcfarlane rick body, faceoff daredevil head modified and resculpted with a tv series 2 rick hat. The symbol on his shirt isnt quite accurate but I'm pretty happy with the overall look.
Thanks for looking :)](userimages/customs/48500/48454-1.jpg) Carl Grimes Walking Deadby thejado101Hey guys. Today I present Carl Grimes of the walking dead tv series. He was made from a mcfarlane rick body, faceoff daredevil head modified and rescu...2 comments |
![[Daryl Dixon] Same as last Daryl but I completely sculpted him a shirt like he wore in the season 3 midseason finale. Also changed his legs for those of btvs deluxe angel and made him a new crossbow and repainted him head to toe.
Thanks for looking! :)](userimages/customs/48000/47848-1.jpg) Daryl Dixon Walking Deadby thejado101Same as last Daryl but I completely sculpted him a shirt like he wore in the season 3 midseason finale. Also changed his legs for those of btvs deluxe...8 comments | ![[Deputy Rick Grimes (Season 1)] Hey guys! Finished my season 3 Rick so I thought I'd do a season 1 one as well. it's not entierly accurate but I'm pretty happy with the overall look. Unfortunately I lost his revolver just before I took pics :(
recipe:
Hat: Jonah Hex
head: modded alex mercer with neck cut off and ball joint put up in head
upper body: Gordon with a lot of added sculpt
forearms: Neca hunger games with Gordon left hand
legs: BTVS deluxe spike
Guns: fodder
Thanks for looking!](userimages/customs/48000/47847-1.jpg) Deputy Rick Grimes (Season 1) Walking Deadby thejado101Hey guys! Finished my season 3 Rick so I thought I'd do a season 1 one as well. it's not entierly accurate but I'm pretty happy with the overall look....9 comments |
![[The Governor] quite a basic custom and it's not 100% accurate but I'm pretty happy with the overall look. Just a winter soldier with a modified face and took of his robotic arm. painted and that's pretty much it. Also got a comic book Rick Grimes in the works and a completed tv series governor which I will upload soon.
thanks for looking, comments appreciated :)](userimages/customs/48000/47712-1.jpg) The Governor Walking Deadby thejado101quite a basic custom and it's not 100% accurate but I'm pretty happy with the overall look. Just a winter soldier with a modified face and took of his...8 comments | ![[Rick Grimes (Season 3)] Hey guys, been pretty busy with walking dead customs recently but haven't been able to find time to post them. Got a lot more coming! I guess I'll just start with Rick Grimes as he's my favourite so far. Also, I've re-done some of my old walking dead figures so I'll try and get updated pics for them too.
recipe:
Head: quicksilver modded
upper body: warpath and dp 2 pack variant deadpool fully sculpted over
legs: BTVS deluxe spike
weapons: fodder and sculpted
Thanks for looking, comments appreciated :)](userimages/customs/48000/47711-1.jpg) Rick Grimes (Season 3) Walking Deadby thejado101Hey guys, been pretty busy with walking dead customs recently but haven't been able to find time to post them. Got a lot more coming! I guess I'll jus...12 comments |
![[Daryl Dixon] Ok, so today I bring you Daryl Dixon from the tv series of the walking dead! He is made from an ml bullseye upper body, neca assassins creed head, toybiz savage dragon upper legs and mezco heroes lower legs. I also made him a crossbow out of fodder.
thanks for looking, comments appreciated!](userimages/customs/44500/44078-1.jpg) Daryl Dixon Walking Deadby thejado101Ok, so today I bring you Daryl Dixon from the tv series of the walking dead! He is made from an ml bullseye upper body, neca assassins creed head, toy...6 comments | ![[Shane Walsh (Tv Series)] Yes, another walking dead figure, this time it's Shane in his tv series version. He is made entirely from the new ml punisher. He has an alternate head, both are from punisher, just re-sculpted and painted. His shotgun is the one that came with punisher, just modified and made longer.
In the second picture, I tried to recapture a certain scene from walking dead, no spoilers :)
Favourite quote:
'how d'you know about what I can live with? You got no idea what I can live with, what I live with!'
thanks for looking, comments appreciated](userimages/customs/44500/44032-1.jpg) Shane Walsh (Tv Series) Walking Deadby thejado101Yes, another walking dead figure, this time it's Shane in his tv series version. He is made entirely from the new ml punisher. He has an alternate hea...5 comments |
![[Glenn TWD] Walking dead season 3 is epic!Today I bring to you Glenn, made from the upper body and head of a dcuc superboy heavily re-sculpted with hands from a punisher and sota remy, upper legs and crotch from ml bullseye and lower legs and feet from a savage dragon.
thanks for looking, comments appreciated](userimages/customs/44500/44031-1.jpg) Glenn TWD Walking Deadby thejado101Walking dead season 3 is epic!Today I bring to you Glenn, made from the upper body and head of a dcuc superboy heavily re-sculpted with hands from a p...3 comments | ![[Rick Grimes (TV Series)] Hey guys, for this one it's a tv series style rick grimes! deluxe spike legs, movie masters upper body, neca prototype head and mcfarlane walking dead accessories.
thanks for looking, comments appreciated!](userimages/customs/44500/44011-1.jpg) Rick Grimes (TV Series) Walking Deadby thejado101Hey guys, for this one it's a tv series style rick grimes! deluxe spike legs, movie masters upper body, neca prototype head and mcfarlane walking dead...6 comments |
![[TWD Rick Grimes (Comic)] new ml3 punisher, Sota Remy head, lots of sculpt and paint.
thanks for looking! feedback apreciated!](userimages/customs/44500/44010-1.jpg) TWD Rick Grimes (Comic) | ![[Bane] So I got back from watching tdkr and wow! Just an all round excellent movie, and I loved how they did bane. I know some people are not happy with the nolan bane or the lack of venom, but I actually really like this costume. A huge, classic, mexican wrestler mask dude just would not have fit into the nolan-verse. But enough about that, onto the figure....
I started with an urban legends punisher, who sports a big open mouth, which worked in my favor as it gave a lot of room to sculpt the mask. I then shaved down all of his hair so he was bald. I sculpted his vest straps and so on...
I would have kept his boots but I had used them for another custom so I just gave him the lower legs from an ML6 punisher. I sculpted the details on his glove thingy and gave him a full paintjob.
He is just about in scale with movie masters, maybe a tiny bit tall.
thanks for looking,
thejado101](userimages/customs/42500/42021-1.jpg) Bane DC Universeby thejado101So I got back from watching tdkr and wow! Just an all round excellent movie, and I loved how they did bane. I know some people are not happy with the ...10 comments |
![[UDON Taskmaster] Hey Guys!
I traded my last tasky, so I decided I wanted one of my own, so I made another, but based it more on the one by Anthonyscustoms. Recipe:
Body: Punisher
head: sculpted over cast deadpool
hood: Sculpted
down hood: Face off daredevil
straps: Fodder
sword: Deadpool
knife and weapons: Face off punisher vs jigsaw 2 pack
belt: Ultimate cap
rest (armour etc..): sculpted
thanks for looking, comments and questions appreciated!
thejado101](userimages/customs/39500/39425-1.jpg) UDON Taskmaster Marvel Legendsby thejado101Hey Guys!
I traded my last tasky, so I decided I wanted one of my own, so I made another, but based it more on the one by Anthonyscustoms. Recipe:
Bod...5 comments | ![[Onslaught] Long time since I've posted a custom. I just havn't had the time to upload anything, but I have been very busy, so there will be quite a few new figures in the coming weeks. Anyways, took a baf onslaught, modded/resculpted his legs so they looked more humanoid looking (like his more magneto style powerful form). Added a maestro hulk head and neck on top of the onslaught body and entirely resculpted. Everything not mentioned is sculpted. One LONG paint job later and he was done.
comments/questions greatly appreciated,
thanks,
thrjado101](userimages/customs/39500/39424-1.jpg) Onslaught Marvel Legendsby thejado101Long time since I've posted a custom. I just havn't had the time to upload anything, but I have been very busy, so there will be quite a few new figur...6 comments |
![[Deadpool Merc with a Mouth] I took my previous Deadpool and repainted him. Then I took the head and harness from a two pack deadpool and put them on my previous deadpool and painted them. The heads are interchangeable between the bowen version and the two pack version with small rare earth magnets. Deadpool FTW!!!
thanks, comments welcome.](userimages/customs/37500/37282-1.jpg) Deadpool Merc with a Mouth Marvel Legendsby thejado101I took my previous Deadpool and repainted him. Then I took the head and harness from a two pack deadpool and put them on my previous deadpool and pain...6 comments | ![[Crossbones] Hey guys!
Before I get into the specifics about this custom I just want to say that this custom was mostly made by a buddy of mine called Rossotron. He is a highly talented customiser and this is uploaded under his permission. It's made from a hulkling body with a casted head and fodder riot vest. All I did was give the arms some new paint and slightly increase the amount of drybrushing on his legs and back (forgot to do his chest).
Thanks for looking, comments welcome!](userimages/customs/35500/35293-1.jpg) Crossbones Marvel Legendsby thejado101Hey guys!
Before I get into the specifics about this custom I just want to say that this custom was mostly made by a buddy of mine called Rossotron. H...8 comments |
![[UDON Taskmaster V.3] Hi guys,
I am loving Taskmaster at the moment! I didnt like the legs or head on my previous taskmaster so I replaced the legs with legs from a sota remy (with added sculpt) and took a random head and completely sculpted the face/hood. The hood was originally removeable but I chose to keep it on permanantly so now the head is fully articulated and there is a small gap between the hood and the neck so he has full head movement. A little sculpting here and there and there you have it, UDON taskmaster!
Thanks for looking, comments welcome!
P.S. Sorry, the paint is a bit scratched because he has been sitting on my shelf for almost a month now and I have been meaning to upload him but havent found the time. Oh, and I really need to find him some pistols!](userimages/customs/35500/35292-1.jpg) UDON Taskmaster V.3 Marvel Legendsby thejado101Hi guys,
I am loving Taskmaster at the moment! I didnt like the legs or head on my previous taskmaster so I replaced the legs with legs from a sota re...14 comments | ![[HEROES Peter Petrelli V.3] Hey guys,
I figured that Mezco made Sylar and Hiro in their Kirby Plaza showdown clothes, yet they made Peter, mohinder and Claire in clothes from other appearances from season 1. So what I did was gave him extra ball jointed hips instead of those annoying 'v' hips and just sculpted loads of clothes. I used fodder for his jacket and gave him a full paint job.
Thanks for looking, comments welcome!](userimages/customs/35500/35179-1.jpg) HEROES Peter Petrelli V.3 |
![[Modern Deadpool V.2] Hey guys,
sorry, I'm hooked on perfecting my deadpool at the moment. Basically same as my last. Made a proper harness from fodder parts. I modded the bowen head because it sat too high up on the neck, now it sits slightly lower down. I gave him swords from a hand ninja and gave him a repaint. I also gave him an alternate head made from ronin.
thanks for looking, comments welcome.
P.S. Sorry if the pics are a bit dark.](userimages/customs/35500/35177-1.jpg) Modern Deadpool V.2 Marvel Legendsby thejado101Hey guys,
sorry, I'm hooked on perfecting my deadpool at the moment. Basically same as my last. Made a proper harness from fodder parts. I modded the ...10 comments | ![[Classic Deadpool] Hey guys!
two deadpool's in one day and there is another one, yes another one, on the way! anyway, for this one I tried to remake the toybiz deadpool. really simple, took a silver surfer, and sculpted/cpbbled parts to create the final product. the head is from a ml6 deadpool headcast. many thanks to galactape for the swords/guns and surfer body. many thanks to Ole jade jaw for the two smg's(not pictured).
thanks for looking, comments welcome!
P.S. he has sculped shin and feet straps and please excuse the strap that goes from his shoulder to his belt. I forgot to add it but I will get round to putting it on for the v.2.](userimages/customs/34500/34191-1.jpg) Classic Deadpool Marvel Legendsby thejado101Hey guys!
two deadpool's in one day and there is another one, yes another one, on the way! anyway, for this one I tried to remake the toybiz deadpool....4 comments |
![[Bowen Deadpool] Hey guys!
Long time no custom. I just took my previous deadpool and gave him the bowen bust head from CKcastings. the head is interchangeable by magnets with my last moon knight head. I also moved his pistols and holsters to his thighs. Many thanks to galactape for the machine guns!
thanks for looking,comments welcome!](userimages/customs/34500/34190-1.jpg) Bowen Deadpool Marvel Legendsby thejado101Hey guys!
Long time no custom. I just took my previous deadpool and gave him the bowen bust head from CKcastings. the head is interchangeable by magne...5 comments | ![[Punisher: War Zone] Hi guys! Today I got for you a Punisher: war zone style! I entirely resculpted baron zemo figure and sanded down his shin fluff thingy's. His regular head is from the ml4 punisher and the alternate gas mask head is from a dcuc deathstroke. the gun is a mix of about four guns and accesories.
Thanks for looking, comments welcome!](userimages/customs/33500/33065-1.jpg) Punisher: War Zone Marvel Legendsby thejado101Hi guys! Today I got for you a Punisher: war zone style! I entirely resculpted baron zemo figure and sanded down his shin fluff thingy's. His regular ...6 comments |
![[Galen Marek] Hey guys, Just got an Hml punisher and thought that loosecollector's galen was awesome! So I set to work. Couldnt find an xavier head but I thought that the btvs deluxe spike had good likeness so I sanded down his hair, did a little sculpting here and there and gave it a complete paint job/wash/drybrush.
Thanks to GOLIATH_CUSTOMS for the punisher fig.
Thanks for looking, comments welcome!](userimages/customs/33500/33039-1.jpg) Galen Marek Star Warsby thejado101Hey guys, Just got an Hml punisher and thought that loosecollector's galen was awesome! So I set to work. Couldnt find an xavier head but I thought th...4 comments | ![[HEROES Peter Petrelli V2] Hi guys, today I bring to you my new and improved Peter Petrelli from the tv series HEROES. If you haven' seen my first Peter then please check it out after so you can see the difference.
So I just re-sculpted the hair at the back and front, (it wasn't too short or anything, but i remember him having longer hair more often). I took a collar off of a Ml longshot and gave him a paintjob,a wash and finally a dry brush. He also has an extra alternate hand from a sota remy.
If your interested in how he has ball jointed hips and what not (the mezco version had vertical cut hips) then please look at my previous peter for full recipe.
thanks for looking, comments welcome!](userimages/customs/33000/32922-1.jpg) HEROES Peter Petrelli V2 |
![[Alex Mercer] Hey guys! To continue my line of gaming figures, i thought I'd remake my Alex Mercer. I removed all of the fabric on his shirt and replaced them with sculpt. I repainted the whole thing and changed xorns legs to a BTVS deluxe spike legs which work great on Alex. Regards to billmaru and Vincentshaw for making anazing customs thst inspired me to make this custom.
the hood is also removeable.
Thanks for looking, comments welcome.
UPDATED: I just thought that I should show a pic of the removeable hood.](userimages/customs/33000/32673-1.jpg) Alex Mercer Prototypeby thejado101Hey guys! To continue my line of gaming figures, i thought I'd remake my Alex Mercer. I removed all of the fabric on his shirt and replaced them with ...5 comments | ![[Nathan Drake] Hi there. I got the hawiian two pack angel and spike for an amazing deal and I just thought that angel would make a great Nate. I also saw da mans awesome nate but I couldnt find that particular headsculpt. i thought angel looked like nate anyway so it was fine. really simple, just resculpted his whole hair and his straps and belt. full paintjob and thats it.
thanks for looking, comments welcome!](userimages/customs/33000/32672-1.jpg) Nathan Drake Unchartedby thejado101Hi there. I got the hawiian two pack angel and spike for an amazing deal and I just thought that angel would make a great Nate. I also saw da mans awe...4 comments |
![[Ezio Auditore Da Firenze] Hey guys! Just replaced remy's head with a neca Altair and sculpted the rest. Added a cape/shaul and thats it. for full recipe, please view my previous ezio!
Thanks for looking, comments welcome!
UPDATED 11/9/2011 hood has been resculpted.](userimages/customs/32500/32476-1.jpg) Ezio Auditore Da Firenze Assasian's Creedby thejado101Hey guys! Just replaced remy's head with a neca Altair and sculpted the rest. Added a cape/shaul and thats it. for full recipe, please view my previou...4 comments | ![[Modern Deadpool] hey guys! Another deadpool! I really liked anthony customs' armory deadpool but I couldnt find any shield agents. But then I found out that the F/O punisher uses the same body mould so I easily found one of him. So I won't bore you with all the details And get onto the recipe:
Head: Moon knight heavily resculpted
Body: F/O Punisher
Suit piping: sculpted with apoxie
wrists and neck straps: sculpted
strap on chest: DCUC deathstroke gun strap/ neca rios strap
belt: sculpted
left gun holster: F/O Punisher
left gun: NECA rios
right holster: DCUC deathstroke
right gun: DCUC deathstroke
Katanas: Scratch made
Many thanks to Blaynescott for helping me out with this custom which wouldnt be here without his help.
Thanks for looking, Comments welcome and appreciated!](userimages/customs/32500/32427-1.jpg) Modern Deadpool Marvel Legendsby thejado101hey guys! Another deadpool! I really liked anthony customs' armory deadpool but I couldnt find any shield agents. But then I found out that the F/O pu...12 comments |
|