![[Afro Samurai] wanted to make this guy a while ago, and got side tracked just like everyone else on the realm. started with a gambit upper torso, mashed it with a savage dragon lower torso,feet, added a air strike wolverine head XMC's, then sculpted the hair,arm cuffs, and pant legs, and added weapon x's feet. made a small base for this guy. hair gets heavy when its made of apoxy. couldnt make it any more heavy, or else he'd never be able to stand lol. gave him 3 swords, one bloody, and thats about it, hope u guys like. more pics on the link below](userimages/customs/48000/47589-1.jpg) Afro Samurai | ![[Black Widow Movie Style] tried this one before and rushed it. tried it again, however this time i chopped the neck off and shortened it, and trimmed her collar down so the head could fit on better. full re-paint over figure and skin tones. just thought i'd show the community. more pics on the listing link](userimages/customs/48000/47588-1.jpg) Black Widow Movie Style |
![[Kidpool] had this guy in my fodder, i sculpted this head about a year ago, so i touched it up a lil, and painted him. gave him some light sabers from star wars and here he is.](userimages/customs/47000/46635-1.jpg) Kidpool | ![[Championpool] bought a bunch of these thunderballs whenever i seen them knowing i'd use them for customs, so here he is , championpool. really loved how gritty and awesome this character was, so i wanted him to look it in a figure. tried my best to capture his greyish highlighted blue skintone. thunderball body and head sanded, hair was from a lord of the rings helmet i cut up, straps from mr sinister, and sword holder is from bishops gun holster, sword i made from 2 dif swords. hope u guys enjoy!](userimages/customs/47000/46634-1.jpg) Championpool |
![[Lady Deadpool] wanted to use my fodder again, and go with gritty comic look, not hasbro look. so i'm pretty sure i bought this with intentions on making lady deadpool with her. finally got around to getting to it. sculpted head ( im not to good at sculpting) mr sinister straps for her straps ( if that makes any sense) gi-joe sword holders -are removable ( hold swords perfectly) removeable gun holster from roml deadpool, swapped out one hand for a donna troy hand for a better sword holing hand i drilled out. and here she is.](userimages/customs/47000/46633-1.jpg) Lady Deadpool | ![[Deadpool Deadpool Corps Style] wanted to use my fodder, so had a few of these bucky's, a deadpool body with no straps or head, and some deadpools i got off of amazon , so i started. i went into this wanting to makes the team look gritty, like umm... comicy is thats even a word. also cut the knife off the base, that thing dows nothing but get in the way!
bucky cap- 80% of the body
deadpool - lower legs from shin down
back strap/ sword sheaths/holder/swords - roml deadpool
other straps- mr sinister](userimages/customs/47000/46632-1.jpg) Deadpool Deadpool Corps Style |
![[Hulkpool] Ok, i dont kno how tall he actually is, so i put 10, how tall is the marvel select hulk base anyway? whatever, so here he is, hulkpool. i seen him done a few times on here, and everyone has there recipes and versions. however, i've been telling myself i HAVE to use my fodder. so i have a failed atempt at making a spider hulk out of this base, and went from there. bought a marvel select juggs head, sanded the hair down, sculpted the edging of the mask, took those ripped pants off him, and resculpted the torso some,arm straps, and arm and leg rip parts. took this guy 100% apart because this body rubs ALOT , so i sanded everything down, and allowed for more room in his shoulders so he didnt rub. painted, and what you see is what you get](userimages/customs/47000/46631-1.jpg) Hulkpool | ![[Bebop TMNT] well 80's style is the theme, here he is, rocksteady's right hand man a blast from the past lol. this guy was fun, a little work, but fun to paint and use new colors. he is a maestro that was broken, so i put him back together and lost the chest articulation, but he's still nice to look at. again, this isnt par with "ANTHONYS CUSTOMS" but i didnt have everything i need and we agreed on a price that reflected the missing elements. sculpted his vest and added some lines/ details/ buttons/ holes etc.. used the classic 80's head and was stumpted on how to use it since it was rubber, and hollow inside. so.. i chopped the maestro hulks head up in pieces untill it looked like a cork and then slid it in and it worked. it was either that, or fill it with sculpt and make it even heavier then he already was gonna be. but this way i didnt have to make a new head hole etc/think. sculpted the shoe laces and sanded the crap outa this guy. went to walmart and found some chains for a f](userimages/customs/43500/43357-1.jpg) Bebop TMNT |
![[Rockesteady TMNT] Let me start by saying this isn't on the " ANTHONYS CUSTOMS LEVEL". also, how much i charged the guy for them i wasn't going to go to far and beyond to break my bank. however i couldnt find a decent base, or a smart hulk for the base. so i used a planet hulk base, sculpted the upper edges of the shirt and sanded them to meet the skin. used a 80's TMNT head from rocksteady, and found some maestro hulk boots sculpted on laces, slapped on some fodder belt and pouches that were a nice camo style and color and he came together. i also have 2 huge guns for him that were from a 12 inch gi-joes. and also made his horns slightly bigger. i really fell in love with this character while painting him, he came out 90% how i wanted him to. i couldnt find any small turtle shells for his belt so i said F-IT. HOPE U GUYS ENJOY](userimages/customs/43500/43356-1.jpg) Rockesteady TMNT | ![[Aoa Ice Man] hml Human torch with 3 heads one reg hml torch, one variant, and one tbml ice man head , hot glue, rocks, and other things. custom blue i made then dry brushed the crap outa this guy. the ice chair was made from a movie masters sign, the seat was a bondo scraper made of rubber hot glue on top of a small can. arms were made of a spawn guy he is purple and has middle fingers or whatever, i ripped his arms off and turned them upside down, glued them on, then glued tiny spikes on the arms, tired rope/ wires to the masters base, hot glued everywhere and added rocks to the base to give ice look. painted, then dry brushed everywhere. i also took the marvel legends ice man base with the sentinel hand and added some glue and a couple rocks and repainted that. hope you guys like. the chair is like 3 pounds lol](userimages/customs/42000/41861-1.jpg) Aoa Ice Man |
![[Hulk Repaint] Randomly found a 3 hulk on the pegs the other day, so i figured i could part with one and try to do some green skin tones i been wanting to try. so here he is, repainted with 3 colors. also painted the pants traditional purple for my likeing. i am NOT portraying the avengers movie hulk skin tones in any way, only practicing for my own benefit. i wish people would start putting in the info what colors they used, so im including a picture of the colors i used =) tell me what you think](userimages/customs/42000/41859-1.jpg) Hulk Repaint | ![[Skrull Thor] Started this about a year ago, and he sat around. now that i learned how to do some shading and drybrushing it was a fast knockout since i already had the head on. a year ago i woulda dremeled out his head more so it would sit lower, but i was new and didnt know anything and just read secret invasion. yea i know its mad old but i just got back into comics/figure a couple years ago. hope you like, i really like the greens. i also dremeled out underneath the arm pit, so his arm can actuall sit next to his body in a vanilla pose and not look stupid like alot of the select, and bigger figures.
HML - thor- body
ML- betta ray bills wings on the head
LOTR- gandalfs cape i think ( the white)
Marvel Select - skrull head](userimages/customs/42000/41582-1.jpg) Skrull Thor |
![[Casey Jones TMNT] well i had a weapon x wolverine laying around without feet, and i had a savage dragon lower body also so here it is.
weapon x wolverine upper torso, savage dragon lower torso and legs, with a original out of someones toy box casey jones from the 80's. repaint. i left the head a little grungy because casey doesn't strike me as a clean guy who shines his mask every chance he gets =) props are from a couple simpsons figures. didnt know what color to make his golf bag lol.ps. most of these customs i did a year or so ago, and never listed them. i woulda sculpted his shirt if it was current. he will fit in scale with the new tmnt classics line and is in scale with neca i guess.](userimages/customs/42000/41512-1.jpg) Casey Jones TMNT | ![[Skrull Hulk] series 1 hulk i think, painted a LONG time ago maybe 2 years ago, i repainted him the other day and just added some shading. Select skrull ears with a thing lower arm.](userimages/customs/42000/41511-1.jpg) Skrull Hulk |
![[Skrull Venom] Hasbro venom re-sculpted chin, with marvel select skrull ears and repaint. comments welcome
Ps. get your skrull Army up =)](userimages/customs/42000/41510-1.jpg) Skrull Venom | ![[Skrull Yellowjacket] Had an Extra YellowJacket laying around and was putting some older customs on ebay, so i did these real quick to add to the group. the skrull thor in the last pic isn't finished, maybe tomorow will ppost him. if curious in the green i used ask in comments and i'll answer. Getting a light box this week for better picture taking =)](userimages/customs/42000/41509-1.jpg) Skrull Yellowjacket |
![[Skrull Spider Woman] Just a resculpted chin for spiderwoman leader of the secret invasion.](userimages/customs/42000/41508-1.jpg) Skrull Spider Woman | ![[Wrecker Wrecking Crew] Thunderball base, jakks pacifit head, sculpt, and sculpted crowbar. wanted a wrecker , for the crew for some pics, here are a few, dont like him as much as my bulldozer, but here he is, hope u like.](userimages/customs/41500/41486-1.jpg) Wrecker Wrecking Crew |
![[Bulldozer] thunderball base, wrestler head ( jakks) it was a black wrestler, savage dragon lower arms and sculpt. . wanted the paint to pop. didnt get my lightbox in time to post good pics, but hey, work with what i got, hope you enjoy.](userimages/customs/41500/41485-1.jpg) Bulldozer | ![[Black Widow Avengers Movie Style] well, started off with a two pack black and white catwoman i got from a hong kong seller for 10 bucks. first decided that the feet WERN'T going to work so i dug through my fodder of my feet box and tried moonknight and decided it was WAY to big, then seen hydro man feet n tried them on it it was PERFECT. i onloy had to drill the hole bigger to allow the dcuc peg to fit through. AND YES, ANKLE ROCKERS! then i added a domino belt with attatched gun holsters, domino guns/pistols. the belt wasnt long enough to fit around so i added some pouches and stuff from knight crawler( xmc). i didnt know what head i was going to use untill i seen a decent black widow head at my shop from the marvel select line i think( the one with NO LEG ARTICULATION). so i stole her head off, cut the neck off, and redrilled a hole for the peg to fit nicely. they i took her nunchucks off her pouches n added them on the one i made. after that i seen the one hand wouldnt hold the gun even after the hot water cold](userimages/customs/41000/40995-1.jpg) Black Widow Avengers Movie Style |
![[The Flash Marvel Universe] this was a custom i wanted to do for a couple days since i seen some1 else make it. but i put my own design/ preferances into him. was fun and pretty easy to do.
base- Mu human torch 2 pack i think
head- Captain Britain with sanded chin
everything sculpted wrists, chest, weist , the lightning bolt was made from a sota street fighter card packaging , and antennas were made from a best buy card cut to likeing .](userimages/customs/41000/40946-1.jpg) The Flash Marvel Universe | ![[Batman Marvel Universe] Marvel universe Punisher- body
head, cape, gun- dark knight rises batman figure
sculpted wrists, and cut best buy card for spikes.
had some fun making this, im nto sure what suit type you could call this, maybe arkham city or something i dont know seen some1 make one n gave a shot at these tiny figures for the 1st time. trying to upload some more pics but site is moving SO SLOW THEY WONT UPLOAD ?](userimages/customs/41000/40945-1.jpg) Batman Marvel Universe |
![[Lady Deadpool] well, wanted to do a lady deadpool for a WHILE. so i figured i had all these wasps in my fodder and sculpted the head a month or two ago n said ok its time. so my girl and daughter went on vacation in Poland for 3 weeks so i had times to finish 5 or so customs i been doing here and there while my daughter is sleeping. but now i have no responsibilities for 3 weeks so here she is. i don't have swords for her, but hand ninja/ronin/ deadpool 2 pack swords fit perfect and snug! also hair is fully poseable
base- wasp
feet- x-23 from the shin down with blade removed and re-sculpted
arms- mystique
hair- aoa sabertooth](userimages/customs/41000/40793-1.jpg) Lady Deadpool | ![[X-23 X Force] Sorry can't put all the pics up, the camera i use for some reason makes pics at 2.2 mb and 3-4 mb. if anyone can help me by telling me how to shrink my pics in mb's let me know. check the Bay Link to see all pics if interested.=( This was my first attempt at painting skin tones also =)
was made from...
base- wasp
arms lower legs- x-23
head- sharon carter
outfit creased was a small rubber string of some sort. im guessing u can get it at michaels or something](userimages/customs/41000/40624-1.jpg) X-23 X Force |
![[Nightcrawler X-Force] Well, i originally had this guy 90% done using a x men classics nightcrawler with only his neck peg to glue in, and i was ont he phone while doing it. unfortunately glue sept through a crevice in his neck and glued his arm ball joint shut!=( them i got really mad because of the time i took to do this guy, so i left my house n got a rojo tea monster. i came back and remember i had a marvel legends galactus series nightcrawler in my fodder with a broken head. so i bashed my messed up version with a hammer on his upper torso n modder the ML upper torso to fit on top of the xmc's lower torso and legs. after that i had to sand the torso down to fit the slightly bigger ml upper to fit right. after that i told myself the xmc lower arms looked better with the finger nails and gloves so i put them on a ml's arms. after that sanded, repainted and sealed. i made a custom blue for his skin tones and i think it turned out nice! let me know what u guys think
Head, lower half ( torso down) lowe](userimages/customs/41000/40617-1.jpg) Nightcrawler X-Force | ![[Wolverine X Force Costume] this was a nice easy custom. i always think my wolverines should be height wise perfect. so i went with aoa wolverine swapped out his head n arms with brown suit wolverine i had in fodder, and gave him those bad ass punisher boots like i did my deadpool. next i sculpted a x on his belt n added a few pouches ( not to many i didnt wanna make him look unlike the comic) after that, repaint. the head worked good because he can look up alot more then before. again my camera gives this guy no justice n its a shame. all joint rub free n sealed](userimages/customs/40500/40072-1.jpg) Wolverine X Force Costume |
![[Deadpool X Force] started off with some union jack parts n seen the arms and shoulders i wanted so i took a bullseye and split him at the ab crunch n combined the two. in the issues i was readying deadpool wasn't wearing that worthless chest gear that looks cool but does nothing so i left it out. his sword holsters r from gi joe storm shadow, they reused the same sword holster in multiple version n waves so u probably know what im talking about. anywho its removeable from his back n holds 2 hand ninja swords snug and nice. gave him some pistol holders n used a couple dif straps. and lastly i gave him punisher boots, and a alternate head from aoa wolverine variant i think. this figure looks ALOT better in person, my camera sucks n i guess i either need a light box, or a better camera because these dont come out crispy at all. comes with all guns shown and alternate head. you cant tell in the pictures but he's really drybrushed n shaded](userimages/customs/40500/40071-1.jpg) Deadpool X Force | ![[Shredder TMNT Concept] This has been coming together for me for a while, i was only waiting on the parts to arive in front of me. sorry about the pictures, i feel as if they dont show how cool this guy is ( paint wise) . This is my concept of how i think shredder looks in my head with out reading the tmnt comics or watching any of the tv shows. i think i only seen the movies. all in all here's the recipe, hope u guys like.
1) X men Classics Magneto base body
2) Head/ shoulder pads- 90's shredder head i think, and 80's shredder shin pads are now shredders shoulder pads( spiked ones)
3) lower shoulder pads - lcbh judge dread knee pads ( you can't tell but i painted these purple and black, you may be able to see pics r kinda dull.
4) Arms- ML namor
5 ) removable arm blades - Gi Joe storm shadow](userimages/customs/32500/32322-1.jpg) Shredder TMNT Concept |
![[Psylock X Force Outfit] just a psylock repainted =)](userimages/customs/32500/32288-1.jpg) Psylock X Force Outfit | ![[Iron Fist New Outfit] Iron fist, collar thing removed/ resculpted. basicly a repaint except for the little scult that was needed. i was scared to paint that dragon on his chest because i was doing like 5 customs in a day n i was on mad redbull lol but it turned out good. thanks for looking guys!](userimages/customs/32500/32287-1.jpg) Iron Fist New Outfit |
|