![[WWR Bertie] I love wwr but the figures are ridiculously overpriced so I made my own to go with 1/18 scale figures.
The body is the tip of a whiffle bat, the arms are various lego parts and transformer hands, guns are modded 1/6 scale, and the belt is removable with velcro and has a holster for the magnum.
After many paint washes I got the worn texture wwr figures have.
hope you like.](userimages/customs/28500/28476-1.jpg) WWR Bertie Pulp Charactersby Cpt. YesterdayI love wwr but the figures are ridiculously overpriced so I made my own to go with 1/18 scale figures.
The body is the tip of a whiffle bat, the arms ...1 comments | ![[Deadpool] I used this movie/ml wolverine I won online, the arms are from a ml dr. octopus, I sculpted the head and holsters. and straps are rubberbands. Weapons are from various figures,
This was one of my first customs, I used clay to sculpt the head and it started to crack recently :/
thanks for looking.](userimages/customs/28000/27684-1.jpg) Deadpool Marvel Legendsby Cpt. YesterdayI used this movie/ml wolverine I won online, the arms are from a ml dr. octopus, I sculpted the head and holsters. and straps are rubberbands. Weapons...0 comments |
![[Young Darth Vader] This is a concept I came up with of what vader looks like in his early years, at this point he refuses to wear the full suit for it takes away what little humanity he still has. I didn't like how fast the transition was for anakin to be fully evil in Ep. III, I'd like to think it was a longer process.
I used an Ep.II anakin head bc I personally think it's the most accurate/detailed sculpt. I then shaved the hair and carefully burned some areas then gave him a nice paint job. The body is from a ROC Gen. Hawk, boots from a 25th cobra elite, and the gloves are from a darth maul pvc figure.
thanks for looking.](userimages/customs/28000/27586-1.jpg) Young Darth Vader Star Warsby Cpt. YesterdayThis is a concept I came up with of what vader looks like in his early years, at this point he refuses to wear the full suit for it takes away what li...2 comments | ![[Boba Fett] Replaced the crappy legs most Star Wars figures are cursed with with GI Joe legs. Also gave him real braids and a longer neck](userimages/customs/27500/27169-1.jpg) Boba Fett |
![[Desert Strike Duke] After seeing the new POC Dusty I wanted a desert themed Duke so I pulled this guy together from my fodder bin.
-legs/head are from Resolute Duke
-boots/uperbody from resolute cobra trooper
-forearms from MU wolverine
-gasmask from 25th Shockblast
I also made duke two shemagh's: one as a mask and another as a scarf. They were hardened to shape using a water/glue mix and then painted khaki as well as the pants.
Enjoy.](userimages/customs/27000/26980-1.jpg) Desert Strike Duke | ![[The Fallen] Repaint of the Fallen in a flat stone grey, didn't want him to be shiny since he's thousands of years old. Replaced the pathetic excuse for hands he came with for leader class brawls hands, gave him a ball jointed neck so he now has a neck and doesn't have to be staring forward all the time, and the staff was made for an antenna. He is still transformable but I didn't bother to take a picture in his cybertronian jet mode.
I know the whole ROTF craze is over but I recently got Transformers fever after seeing the teaser for DOTM. Enjoy.](userimages/customs/27000/26966-1.jpg) The Fallen |
![[Movie Optimus Prime] This is just a repaint of voyager OP from the movie line. He has been fully repainted and I also gave him mud splats, oil stains, and scratches here and there.
The gun in the first picture was made primarily out of different pens and attaches magnetically to his hand.
Thanks for looking.](userimages/customs/27000/26965-1.jpg) Movie Optimus Prime | ![[Wolverine] Repainted my ML wolverine (I didn't like the caramel colors he came in). He was repainted in dark yellow/brown. I then used the wolverine claws tutorial to give him metal claws. And the belt is from another wolverine fig.
The last picture is of another wolverines head, I planned on painting the face to match his arms skin tone and paint the katana clear red to match his Muramasa blade; I'm going to have to do an update on this post bc I didn't get around to doing that yet.](userimages/customs/27000/26890-1.jpg) Wolverine Marvel Legendsby Cpt. YesterdayRepainted my ML wolverine (I didn't like the caramel colors he came in). He was repainted in dark yellow/brown. I then used the wolverine claws tutori...2 comments |
![[Black Spiderman] After reading Spiderman back in black I wanted a black spiderman, but I didn't want it to be shiny black or have shades of purple like the symbiote spiderman because thats a different look. So, I used flat black paint for the body. Getting the spider symbol on was a real challenge.
The body is from a ML wolverine, the hands and head are from a classics spiderman, and the web is a couple of pieces of thick string braided/twisted then painted grey.
thanks for looking](userimages/customs/27000/26863-1.jpg) Black Spiderman Marvel Legendsby Cpt. YesterdayAfter reading Spiderman back in black I wanted a black spiderman, but I didn't want it to be shiny black or have shades of purple like the symbiote sp...4 comments | ![[Thor] The main modification to this guy would be the cape, I think the rubber capes figures come with look so fake and take away from the coolness of figures so I made my thor a better cape using a paper mache with cloth technique. Its really cool bc once the cloth hardens you can shape it and paint anyway you like.
Aside from that I also made the hammer from scratch, gave a chain for his cape, and a skirt.
Thanks for checking him out.](userimages/customs/27000/26857-1.jpg) Thor Marvel Legendsby Cpt. YesterdayThe main modification to this guy would be the cape, I think the rubber capes figures come with look so fake and take away from the coolness of figure...0 comments |
![[New Captain America] I didn't have a new captain america aka bucky bares in my ML colleciton so I made one. This guy is made using a DCUC superman body, hands from a ML wolverine, head from ML wave 1 cap.
I made the shield out of a pin, gun, knife and holsters are from gi joe figures.
I wanted a metallic looking blue that wasn't too shiny and overall I'm happy with the results.
comments/criticisms appreciated :)](userimages/customs/27000/26856-1.jpg) New Captain America Marvel Legendsby Cpt. YesterdayI didn't have a new captain america aka bucky bares in my ML colleciton so I made one. This guy is made using a DCUC superman body, hands from a ML wo...4 comments | ![[Nick Fury] When I think of a government agent I think of a guy in a black suit (james bond style) not in blue tights and white straps/boots. And I remember reading some old nick fury comics where he appears in a black suit so I based it on that. I had a leftover DCUC superman head and it looks a lot like david hasselhoff and the hoff played nick fury once so it was a perfect match.
The suit was painted in a dull black, shoes glossy black, and sculpted the front of the hair to match fury's.
Enjoy.](userimages/customs/26500/26262-1.jpg) Nick Fury Marvel Legendsby Cpt. YesterdayWhen I think of a government agent I think of a guy in a black suit (james bond style) not in blue tights and white straps/boots. And I remember readi...4 comments |
![[Ironman] Made a few changes to my ironman to make him look better. First of all the hands this figure came with were small/feminine so I replaced them with fists from a superman figure, then gave him a tony stark head using a movie punisher head, and finally gave him a few paint scrapes here and there.
Enjoy :)](userimages/customs/26500/26245-1.jpg) Ironman Marvel Legendsby Cpt. YesterdayMade a few changes to my ironman to make him look better. First of all the hands this figure came with were small/feminine so I replaced them with fis...1 comments | ![[Zombie Spider-Man] I felt my zombie cyclops needed a companion in the never-ending hunger so I fashioned him a zombie spider-man. Just a spiderman with, I believe, an army of darkness deadite leg/hands. The rest of the gore and mouth were sculpted. Simpler then my zombie cyclops but in my opinion effective.
Thanks for looking.](userimages/customs/26500/26223-1.jpg) Zombie Spider-Man Marvel Legendsby Cpt. YesterdayI felt my zombie cyclops needed a companion in the never-ending hunger so I fashioned him a zombie spider-man. Just a spiderman with, I believe, an ar...0 comments |
![[Zombie Cyclops] After reading marvel zombies I knew I wanted to make atleast one zombie hero and I loved how cyclops was zombified in the comics so I chose him.
Base is a FF human torch, straps are rubber bands, head is from a spawn, and visor is sculpted. The hole in his chest was a late add-on, thought it would make him more gruesome; then a full repaint.
I know I'm a little late on the marvel zombies craze but I'm glad I made this figure. Comments and criticisms appreciated.](userimages/customs/26500/26222-1.jpg) Zombie Cyclops Marvel Legendsby Cpt. YesterdayAfter reading marvel zombies I knew I wanted to make atleast one zombie hero and I loved how cyclops was zombified in the comics so I chose him.
Base ...1 comments | ![[Cobra SWAT Trooper] I wanted to go with a darker/more realistic take on Cobra's expendable assets so I made one that resembles a SWAT officer.
It's funny that Cobra troopers fit the description of a SWAT officer to the letter except for the "counter terrorism" duties of it, I guess a Cobra SWAT would have "counter-counter terrorism" duties :)
Vest and face are from a resolute cobra trooper, body is from a PoC Hawk and helmet from a 25th hit & run. Enjoy.](userimages/customs/26500/26131-1.jpg) Cobra SWAT Trooper |
![[Snake Eyes] Just a few changes to the figure: painted him dull black, metallic detailing in some areas, dark camo pants, real metal katana, and a silenced SMG with strap.
I was going for a splinter cell kind of look, I really like how he turned out. Comments/criticisms appreciated.](userimages/customs/26500/26130-1.jpg) Snake Eyes | ![[Devastator] Made G1 Devastator using a movie Ironhide for the main parts of the body, tonka construction trucks for the vehicles that make up devastator, and a G1 superion head with antennas shaved off (I don't have a G1 devastator head but plan on buying one). There was a lot of drilling and cutting to make the tonka trucks fit perfectly with ironhides limbs but in the end came out great everything is tight with no baggy/loose parts.
This figure has all the articulation movie ironhide had and a solid paint job. Stands ~9 inches tall. Comments and criticisms appreciated :)](userimages/customs/26500/26084-1.jpg) Devastator Transformersby Cpt. YesterdayMade G1 Devastator using a movie Ironhide for the main parts of the body, tonka construction trucks for the vehicles that make up devastator, and a G1...1 comments |
![[Sam "Spike" Witwicky] Took the jacket off of a Mutt figure from "the kingdom of the crystal skull" toy line and repainted the figure to look like Spike from G1.I guess its a mix of G1 and movie Spike since he has Shia Leboufs face. Also did a little work on the signature yellow boots.
Might redo him to look like rotf Sam, not sure yet. Enjoy.](userimages/customs/26500/26063-1.jpg) Sam "Spike" Witwicky Transformersby Cpt. YesterdayTook the jacket off of a Mutt figure from "the kingdom of the crystal skull" toy line and repainted the figure to look like Spike from G1.I ...1 comments | ![[Megatron] There's no accurate megatron that fits in with universe/classics toy line so I made one and I noticed Optimus and Megatron have the same body type so I used an optimus. Switched out the head, gave him his signature arm mounted fusion cannon, a new chest, big fists (from a robot heroes), energy sword (painted hot glue) and a full repaint.
I had to sacrifice the transformation but I would have never wanted him in gun mode anyways.
Loved how he turned out. Comments/criticisms appreciated. Enjoy.](userimages/customs/26500/26062-1.jpg) Megatron Transformersby Cpt. YesterdayThere's no accurate megatron that fits in with universe/classics toy line so I made one and I noticed Optimus and Megatron have the same body type so ...3 comments |
![[Megatron] This was my first customs.
Just repainted the green megatron to match the G1 megatron, also made a more menacing blaster and a right hand from a robot heroes toy (original figure doesn't have a right hand). Still transforms and retained all articulation.
Enjoy.](userimages/customs/26500/26034-1.jpg) Megatron Transformersby Cpt. YesterdayThis was my first customs.
Just repainted the green megatron to match the G1 megatron, also made a more menacing blaster and a right hand from a robot...1 comments | ![[Optimus Prime] This is just a repaint of Optimus in cherry red, light silver, and royal blue to match the G1 colors, it originally came in very dark red/blue and the cheap grey they use in almost all transformers. I also changed the gun barrel using legos to make it more accurate but I'm not too satisfied with that hopefully ill find a cheap G1 optimus gun, that one was pretty accurate.
Comments/criticisms.](userimages/customs/26500/26033-1.jpg) Optimus Prime Transformersby Cpt. YesterdayThis is just a repaint of Optimus in cherry red, light silver, and royal blue to match the G1 colors, it originally came in very dark red/blue and the...0 comments |
![[Emile] Just made a few changes to my Halo Reach Emile to make him better.
1. Made his knife fit properly in his shoulder sheath like it should.
2. Made his shotgun attach magnetically to the back like in the game.
Comments and criticisms appreciated. Enjoy.](userimages/customs/26500/26017-1.jpg) Emile Haloby Cpt. YesterdayJust made a few changes to my Halo Reach Emile to make him better.
1. Made his knife fit properly in his shoulder sheath like it should.
2. Made his s...2 comments | ![[UNSC Sergeantt] Made another marine to go with my chief, this one was made with a RoC General Hawk and a lego hat. Sculpted the shin guards and painted them, the camo pants and the spartan laser. Enjoy.](userimages/customs/26500/26016-1.jpg) UNSC Sergeantt Haloby Cpt. YesterdayMade another marine to go with my chief, this one was made with a RoC General Hawk and a lego hat. Sculpted the shin guards and painted them, the camo...0 comments |
![[UNSC Marine] Made 2 marines to accompany my Chief this one is made from:
Lower Body: resolute duke
upper body: resolute cobra trooper
head: resolute: duke
shotgun: resolute cobra trooper
spartan laser: RoC storm shadow
ODST SMG: 25th snake eyes
The chest armor and shins were sculpted and painted to match the in game colors. Enjoy.](userimages/customs/26000/25975-1.jpg) UNSC Marine Haloby Cpt. YesterdayMade 2 marines to accompany my Chief this one is made from:
Lower Body: resolute duke
upper body: resolute cobra trooper
head: resolute: duke
shotgun:...1 comments | ![[Master Chief Mark VI] Wanted to make my Master Chief look more realistic and different to other Spartans from the McFarlane toy line so I repainted mine.
Originally a red spartan, repainted the entire figure in flat black, then silver, then bronze. Added the knife sheath, shoulder pads and shotgun from gi joe fig.
I'm new to figurerealm and would appreciate any comments/criticisms. Thanks.](userimages/customs/26000/25974-1.jpg) Master Chief Mark VI Haloby Cpt. YesterdayWanted to make my Master Chief look more realistic and different to other Spartans from the McFarlane toy line so I repainted mine.
Originally a red ...2 comments |
|