![[Michael Myers V.5] working on a few Myers based on his various looks in the films,..here is part 5,.,..overalls are hand made,..the shoes are sculpted with putty,..a new head sculpt was done to match Halloween 5 complete with synthetic hair,..the scythe is a mixture of wood and putty, the knife handle is putty with a hard plastic dremeled and fitted together and painted with acrylics.](userimages/customs/49500/49391-1.jpg) Michael Myers V.5 Halloweenby j-xworking on a few Myers based on his various looks in the films,..here is part 5,.,..overalls are hand made,..the shoes are sculpted with putty,..a new...1 comments | ![[Michael Myers H2] taking the individual head sculpts i did before and fitting them too a body of their own,..but re-sculpting slightly here and there cos the last time i did them i rushed within a few days to get them done for halloween at the time. just tweaking them here and there, here is Michael at the end of halloween 2, complete with blood tears running down the mask,..now the hair is a mix of putty shaped like hair like in the movie but added synthectic hair on to it aswell,..handstitched the overalls and dyed them a dark green,..did the socks myself too,..dirtied the overalls,..bullet holes,..shoes were off another figure and scalpel was just dremeled out of hard plastic....Michael myers H5 version will be next.](userimages/customs/49000/48921-1.jpg) Michael Myers H2 Halloweenby j-xtaking the individual head sculpts i did before and fitting them too a body of their own,..but re-sculpting slightly here and there cos the last time ...2 comments |
![[Michael Myers H4] working on a few Myers based on his various looks in the films,..here is part 4,..the clean mask with the sideburns,..overalls are off another figure,..the shoes are sculpted with putty,..a new head sculpt was done to match Halloween 4 complete with synthectic hair,..the knife handle is putty with a hard plastic dremeled and fitted together and painted with acrylics.](userimages/customs/49000/48917-1.jpg) Michael Myers H4 Halloweenby j-xworking on a few Myers based on his various looks in the films,..here is part 4,..the clean mask with the sideburns,..overalls are off another figure,...1 comments | ![[Jason Voorhees] This is just the 12" Sideshow Jason goes to hell figure,..which i was not too happy with for a while cos of the overall look,..it had the basic look of the film so i just added that few extra touches to it,..re-sculpted the head and mask cos i thought the original was to small, and gave it a bit more mass,..ripped the clothes a bit more accurate to the film,..put a bit of padding underneath the clothes to bulk him out a bit more then painted over the parts that were showing through the clothes with acrylics,..hated the green shirt and grey trousers for this one cos they were not the colors for that particular film so i dyed the clothes a grayish blue, weathered them ,.cos that's the way they seemed in the movie also i used the MEZCO CINEMA OF FEAR Jason for reference. The boots i took off the Jason X Sideshow cos they were more bulkier than the ones on the JGTH figure which i thought were too small.
The broken split mask that i got as an accessory with the 12" MEZCO Jason p](userimages/customs/48000/47525-1.jpg) Jason Voorhees Friday the 13thby j-xThis is just the 12" Sideshow Jason goes to hell figure,..which i was not too happy with for a while cos of the overall look,..it had the basic l...1 comments |
![[Fred Krueger] Used a 12" base for this, made the head completely from scratch using miliput, took parts from a Robert Englund figure cos i used that one for something else,
parts used was the hat, repainted a darker color, added the band around it,.
the sweater which i replaced the sleeves with just plain red like in the first movie and the base of the sweater.
Added the glove, re-sculpted the left hand from a closed fist to a open hand,..the trousers were hand stitched and the boots are sculpted.](userimages/customs/48000/47523-1.jpg) Fred Krueger Nightmare on Elm Streetby j-xUsed a 12" base for this, made the head completely from scratch using miliput, took parts from a Robert Englund figure cos i used that one for so...2 comments | ![[Tech Noir Shootout] taken from one of my best scenes in the movie, the base is cardboard, the bar is made from cardboard then with layers on the front of it, the tech noir sign is cardboard with small holes drilled in then covered from the inside with orange sweet wrapper to give it that yellow tinge and a space at the back for the light. by the way the lights i used were various lights ranging from small bike lights decorated in card, novelty lights. i painted the inside of the "club" a purple/pink color to add to the effect, put a sheet of clear plastic on the floor to give it that polished effect, all in all, lots of cardboard, lots of lights and a load of batteries.](userimages/customs/39000/38712-1.jpg) Tech Noir Shootout Terminatorby j-xtaken from one of my best scenes in the movie, the base is cardboard, the bar is made from cardboard then with layers on the front of it, the tech noi...11 comments |
![[On the Way Home] simple custom using board for the base, 4 pieces of cardboard covered in foilage, coloured paper and random fodder leaves scattered on the floor, polysterene used for the bush and a painted background](userimages/customs/39000/38689-1.jpg) On the Way Home Halloweenby j-xsimple custom using board for the base, 4 pieces of cardboard covered in foilage, coloured paper and random fodder leaves scattered on the floor, poly...10 comments | ![[The Creeper] Hi fellow realmers, been away from here for a while but im back with a new custom, this time, The Creeper as he appeared in the first Jeepers Creepers. I never had the chance to get hold of one when they made one, not sure if it came out over here but anyway,took a new nightmare freddy, resculpted the face, sanded down the sweater, used a bit of putty on the lower half of the trousers to cover the boots, resculpted the hands , cut the coat at the back on the bottom, the hat is made from leather and the hair is wool, the medieval battleaxe is customed and the two crows are putty. gave him a glossy finish to the skin, painted the sweater brown,and dry brushed the coat brown.](userimages/customs/39000/38688-1.jpg) The Creeper Movie Maniacsby j-xHi fellow realmers, been away from here for a while but im back with a new custom, this time, The Creeper as he appeared in the first Jeepers Creepers...12 comments |
![[Tommy Jarvis (Thom Mathews)] Thought i'd try a Tommy Jarvis custom, one of Jason's main arch enemies in the Friday films, i suppose a "Mouth" action figure from "THE GOONIES" could be ideal for a Corey Feldman incarnation of the character but i like the Thom Mathews version the best (a cool actor of the 80's) from my personal best Friday films "JASON LIVES" although the gore factor is tame compared to previous Friday's, i like the Alice Cooper soundtrack, and the ending sequence with Jason and Tommy battling in the lake, but that's just me, anyway modified an action man by cutting the shins and using putty to lengthen the legs and sawed just under the shoulders and wrist taking away the middle section of the arms and replacing with different arms with a bit more articulation and joined together using putty, re-sculpted the head and feet then came the painful part of the process sewing all the clothes together especially the jacket as i had to add another piece of material to the inner](userimages/customs/37500/37427-1.jpg) Tommy Jarvis (Thom Mathews) Friday the 13thby j-xThought i'd try a Tommy Jarvis custom, one of Jason's main arch enemies in the Friday films, i suppose a "Mouth" action figure from "TH...6 comments | ![[The Monster from FEAST] Another cool monster from the horror movie FEAST, basically i stripped the predator down, taking all the Armour off, sanding down everything, then using a lot of putty to re-sculpt the head, hands, torso, thighs and feet, certain parts of the anatomy i deliberately left out. Dremeled and sculpted everything into shape and painted it with acrylics, added a bit of white hair to the back of the monster, then added the animal covering using hair off an old mask and the skull from a lost boys figure.](userimages/customs/37000/36885-1.jpg) The Monster from FEAST Movie Maniacsby j-xAnother cool monster from the horror movie FEAST, basically i stripped the predator down, taking all the Armour off, sanding down everything, then usi...7 comments |
![[The Krites] Taking a trip down memory lane again, after watching all four critters movies late last year, this custom i did, but put it aside as i wanted to start on something else, but anyway i eventually got back into doing this after completing the Ghoulies customs, i wasn't too sure about how to go about this then i thought well somebody had to wear the suit of the BIG Krite, so that's the concept i went with this. It didn't really matter what figure i used as long as it had a basic humanoid shape, so I took an s.p.d. power ranger figure i had lying around and started sculpting the head, arms and feet using A LOT of putty, sanded everything down into shape using the dremel then i added black hair from an old deteriorated mask and that was that. A few days went by and i thought, i'm not too happy with this not without those glowing red eyes, and i looked around my room and remembered that i had some mini torches with red lights lying around, so i ripped the back of the hair off and drilled all](userimages/customs/36500/36475-1.jpg) The Krites Crittersby j-xTaking a trip down memory lane again, after watching all four critters movies late last year, this custom i did, but put it aside as i wanted to start...16 comments | ![[TMNT( 80s Cartoon Style)] Here are the TMHT, sorry TMNT as the word NINJA was replaced with Hero over here back in the days, anyway,Having using the 3inch TMNT last time for the ghoulies, i decided to go retro with my 5 -inch turtles and give them that 80s classic cartoon look. I gave them a re-paint to try and match the show, a slight face re-sculpt, changed the belts using leather and i made a base using card, hot glue gun for the slime, and a lid for the sewer entrance and just scattered bits of random fodder everywhere then painted it.](userimages/customs/36500/36295-1.jpg) TMNT( 80s Cartoon Style) |
![[Ghoulies] I thought i'd give the Myers clan a rest FOR NOW, and start on something else, namely the ghoulies so instead of using five 12" figures, i had five mini Tmnt lying around, four in a pack and one i got free with a DVD so i got to work on them after watching Ghoulies 2 one night and in between working on my Dr. Loomis custom, these are based off the second installment and the less said about part 4 the better. I don't usually work on this scale and this will probably be my one and only attempt at this scale, i would be lying if i said it was easy for me so i give credit to you guys who work with this scale. Anyway i don't know the actual names of these little misfits so i'll give them basic names, the green one always seemed the leader type to me so i'll start with him.
THE GREEN ONE: Sanded down the wrist,elbow and knee pads and chest then re-sculpted the head and put spikes on the back and gave him an extra finger on each hand and painted him a greeny,yellow using acrylics and us](userimages/customs/36000/35842-1.jpg) Ghoulies Ghouliesby j-xI thought i'd give the Myers clan a rest FOR NOW, and start on something else, namely the ghoulies so instead of using five 12" figures, i had fi...18 comments | ![[Dr. Wynn] So here is the mysterious man in black, using the same technique i used on my previous Michael Myers by cutting the leg in two at the shin and adding a bit of putty to give him that extra height, re-sculpted the infamous Dr. Wynn boots and face. the trousers and jumper was hand sewn,i padded the shoulders a little, the coat was off a new nightmare Freddy but i added a piece of material to the sides, the hat was made with two pieces of card for the rim of the hat and leather glued together for the top part with a black band around the top. i gave him extras such as a bag made from leather, a cigarette, a knife and a machine gun which was made from random fodder.](userimages/customs/36000/35690-1.jpg) Dr. Wynn Halloweenby j-xSo here is the mysterious man in black, using the same technique i used on my previous Michael Myers by cutting the leg in two at the shin and adding ...5 comments |
![[Dr. Loomis] After doing Michael Myers, i decided to custom a Dr. Loomis. The clothes are hand sewn, except for the shirt and tie, the shoes are sculpted with putty, the hands have been re-sculpted also the pistol was made from putty and fodder. The top half of the head was sanded down then redone using milliput and painted with acrylics.](userimages/customs/36000/35689-1.jpg) Dr. Loomis Halloweenby j-xAfter doing Michael Myers, i decided to custom a Dr. Loomis. The clothes are hand sewn, except for the shirt and tie, the shoes are sculpted with putt...7 comments | ![[Michael Myers Reboot] I will be doing various characters and looks from the Halloween franchise in the future, but in the meantime here is Rob Zombie's reboot version, again same recipe as my other Michael Myers, put some padding by the shoulders, sculpted the mask with putty then added synthetic hair, an elastic band for the strap, the robe was hand made, the t-shirt was off something else, the patients tag was already on there, i just painted it white, the bottoms were hand made and the feet were sculpted a bit bigger using putty, i put some material on the feet and super glued it just a little underneath the bottom of the feet at the sides, then got two pieces of thick card painted black and glued underneath the foot and the knife is hard plastic and the handle made from putty.](userimages/customs/35500/35172-1.jpg) Michael Myers Reboot Halloweenby j-xI will be doing various characters and looks from the Halloween franchise in the future, but in the meantime here is Rob Zombie's reboot version, agai...1 comments |
![[Michael Myers] Using the same recipe as my evil green ranger, i lengthened the body a bit more and re sculpted the hands and feet. This is a basic look of Michael Myers as he appeared at the beginning of Halloween 4. i did sculpt this as an alternate head on one of my other customs but did a full version anyway. I rounded off the head before putting the bandages on, the gown is hand made, the bandages are real ones and the Tyre lever is a pen sculpted at the end using putty.](userimages/customs/35500/35171-1.jpg) Michael Myers Halloweenby j-xUsing the same recipe as my evil green ranger, i lengthened the body a bit more and re sculpted the hands and feet. This is a basic look of Michael My...3 comments | ![[Green Ranger Darkside.] sometime ago in the early 90's,Zordon chose five teens to become power rangers to defend the world against Rita Repulsa and her goons, but Rita also chose somebody with the skill and qualities to harness the power of the green ranger. Her evil green ranger battled Zordons five rangers and nearly succeeded in destroying them, anyway they broke her spell and the green ranger joined the team.......
welcome to my reality...sometime ago in the early 90's,Zordon chose five teens to become power rangers to defend the world against Rita Repulsa and her goons, but Rita also chose somebody with the skill and qualities to harness the power of the green ranger.Her evil Green ranger battled Zordons five and succeeded in destroying them starting with Kimberly, she fought with every last breath until she was down on the ground, she begged the Green ranger for mercy, but he showed none and with one swing from the Sword of darkness be-headed her. To show how dark and twisted he really was, he mounted](userimages/customs/35000/34560-1.jpg) Green Ranger Darkside. Power Rangersby j-xsometime ago in the early 90's,Zordon chose five teens to become power rangers to defend the world against Rita Repulsa and her goons, but Rita also c...6 comments |
![[Angela Baker] My third Angela Baker custom from one of my favorite B-movie horror films of the 80s.I had to do this figure cos i just love that creepy expression on the face at the end of the film. This is just a basic average-build figure,I removed the head and sculpted a new one, and used the spare head and sculpted it for Angela's ill fated boyfriend Paul.I used a red mixed a little black for that bloody look,I made the base out of thin wood, used some wood glue and spread all over the base, then i got some foliage and sprinkled over for that sandy look, the sign is just a piece of wood stuck to cardboard, painted then glue-gunned to the base.](userimages/customs/35000/34542-1.jpg) Angela Baker Sleepaway Campby j-xMy third Angela Baker custom from one of my favorite B-movie horror films of the 80s.I had to do this figure cos i just love that creepy expression on...17 comments | ![[Freddy Krueger] My best Nightmare films are the first three, and i really like the way Freddy looked in part 2, he looked really evil in that. I didn't like the look of the 12" sideshow demon Freddy so i re-sculpted the head to match that of part 2, ripped the sweater a little, dyed the pants black and made an alternate hand with blades.](userimages/customs/34500/34416-1.jpg) Freddy Krueger Nightmare on Elm Streetby j-xMy best Nightmare films are the first three, and i really like the way Freddy looked in part 2, he looked really evil in that. I didn't like the look...4 comments |
![[Michael Myers :the CURSE of] basically took a leather-face, shortened the mask at the neck, re-sculpt the face using putty, dyed the hair, and also added a bit more. Coveralls were hand made, i sanded the boots down as they had a point on them at the front,painted the hands a natural skin tone then dry brushed a dark red too give that burned look using acrylics. the pumpkin was made from scratch using clay, repainted the base black then used varnish and added the THORN symbol,but anyway i'm quite pleased with the way it turned out.](userimages/customs/34500/34018-1.jpg) Michael Myers :the CURSE of Halloweenby j-xbasically took a leather-face, shortened the mask at the neck, re-sculpt the face using putty, dyed the hair, and also added a bit more. Coveralls wer...4 comments | ![[Michael Myers (Alternate Heads)] I wasn't too happy with the factory made sculpt of the Myers mask when i got this a few years ago..then a few months back i decided to re-sculpt and make it as close to as the original as i could get it and i'm happy with the way it turned out.i liked Halloween 4 as well and thought about making an alternate head for it, so i carefully cut the head off the sideshow figure and drilled a hole under the bottom of the neck, stuck a dowel in the neck and made a part 4 mask from scratch and that was that. then i thought about making a bandaged Myers like at the beginning of H4 which was fairly easy cos i just used real bandage.so now i had three heads, so i thought what the hey...why not make every look from the entire series (minus H3 and the reboots).As an added bonus i did the Ben Tramer mask too even though Myers never wore that mask. the Halloween 6 Myers i did separately cos the coveralls were gray in that one, plus Myers himself was a bit bigger,but anyway here's my tribute to the Boo](userimages/customs/34500/34017-1.jpg) Michael Myers (Alternate Heads) Halloweenby j-xI wasn't too happy with the factory made sculpt of the Myers mask when i got this a few years ago..then a few months back i decided to re-sculpt and m...2 comments |
![[Jamie Lloyd] re-did the head sculpt for this one,.. i put together this custom of Jamie Lloyd as she appeared in one of my favorite entries in the series Halloween 4. the head is sculpted as best as i could get it from scratch, the costume is hand made, the sneakers are made from putty with bits of an elastic band cut and glued for the laces, i used cotton wool dabbed in glue for the two bobs, a piece of material for the neck piece with cotton pulled through the neck part to get that crinkle look, the scissors are done from scratch and the mask is a piece of card with sticky tin-foil tape and a small piece of putty for the nose finished with a piece of string to keep secure to the head.](userimages/customs/34000/33985-1.jpg) Jamie Lloyd Halloweenby j-xre-did the head sculpt for this one,.. i put together this custom of Jamie Lloyd as she appeared in one of my favorite entries in the series Halloween...9 comments | ![[Rob Zombies Halloween 2 (Alternate Hobo Head)] I put this custom on here a while back, but later i decided to do an alternate head of Myers unmasked. i simply used a mixture of clay then putty for the alternate head, not much sculpting as the biggest majority of the face is covered in hair, and i carefully cut the head off that i originally had on and put a dowel in the neck and drilled a hole underneath each head.](userimages/customs/34000/33984-1.jpg) Rob Zombies Halloween 2 (Alternate Hobo Head) Halloweenby j-xI put this custom on here a while back, but later i decided to do an alternate head of Myers unmasked. i simply used a mixture of clay then putty for ...7 comments |
![[Patch: the Plunderer] after doing ninja mike, i decided to do the other pet, but as a villain. basically i re sculpted the head and stomach and feet, sculpted a jacket for him give it a total re-paint then added accessories from my fodder box.](userimages/customs/34000/33609-1.jpg) Patch: the Plunderer Originalby j-xafter doing ninja mike, i decided to do the other pet, but as a villain. basically i re sculpted the head and stomach and feet, sculpted a jacket for ...3 comments | ![[The Undertaker 90s] the undertaker is my favorite wrestler of the bunch. i remember seeing this guy for the first time back in the early 90s when he really did look creepy, so this is my custom based on that era. i cut the bat ears off and re-sculpt the face, added a bit of gingery hair, for the beard, i just put some glue around the chin and sprinkled some hair on. the arms were repainted and the gloves were all ready there, i just cut the bat blades off and painted the gloves gray.the shirt i had lying around, i just cut the sleeves off and dyed the shirt black, the pants i made myself. the boots were pointy so i sanded them down and the shin guards are just leather which i painted gray. the coat is off a new nightmare Freddy, the hat is custom made from leather then rounded off with putty at the top. the tie is leather which i then had to paint the stripes on, the urn is a bottle cork which i sanded down into shape then used putty around it. when i pictured doing this, i wanted to have him stand on a s](userimages/customs/34000/33608-1.jpg) The Undertaker 90s Wrestlingby j-xthe undertaker is my favorite wrestler of the bunch. i remember seeing this guy for the first time back in the early 90s when he really did look creep...4 comments |
![[Ninja Mikey] Originally i was just going to do a basic sculpt of my dog (Mikey) anyway just to see how it would turn out but after seeing danger dog created by kody koala, i decided to turn my dog into a humanoid form just for a laugh. it took me just over a day to complete, basically i repainted the BSG figure and resculpted the head and hands and added a tail using miliput, the belt is just a piece of leather with a loop at the side for the sword, which i got off a tmnt foot soldier and thats about it.](userimages/customs/32500/32039-1.jpg) Ninja Mikey Originalby j-xOriginally i was just going to do a basic sculpt of my dog (Mikey) anyway just to see how it would turn out but after seeing danger dog created by kod...3 comments | ![[Dragon Zord] I made this from scratch, using wood, clay, and putty. Then I painted it using acrylics and printed the design out on the computer. The tail is an individual pieces of wood rounded off with a hole through through each one. Then I put a piece of string through the middle of each one which connects them all together.](userimages/customs/30000/29657-1.jpg) Dragon Zord Power Rangersby j-xI made this from scratch, using wood, clay, and putty. Then I painted it using acrylics and printed the design out on the computer. The tail is an i...1 comments |
![[Casey Jones] Had a load of cheap figures lying around what I bought from a car-boot sale, and decided to make casey jones. Stitched all the fabric myself, boots and gloves were already on. Used putty to sculpt the head, I tried to make it resemble elias koteas as much as I could, the hair was added-the cricket bat and the hockey stick were done out of wood, the baseball bat was done using a pen which was rounded at the end,I then filed down the other end for the handle of the bat. The golf club was a piece of thin metal, I used putty for the club-head and black tape for the other end. The bag was actually a thick permanent marker pen cut off at one end,painted brown using acrylic paint, then I glued some straps on to it using a glue gun. The mask was made out of putty with leather straps glued on and the base was two pieces of soft board secured together, then I used clay and spread-ed it out really thin, then added the brick wall effect, put some gravel down.](userimages/customs/29000/28942-1.jpg) Casey Jones | ![[Harry Warden] I did this custom a couple of years back, after I'd just finished watching the original, I decided to create my own which was funny because one night while I was adding parts to it the trailer for the remake popped up on t.V. At the time I did't know they were doing a remake so I thought this is perfect timing for my tribute to the film. I not long touched it up a bit as it was getting a bit tatty but anyway, I got an action man figure, stitched some dark blue coveralls for him then darkened them a touch with a sponge dabbed in black paint, then I used some leather for the belts and painted them brown.
The boots came with the figure, painted the hands black, the air line attachments were just a piece of an erasure painted black then glued to the sides of the belt, then I stuck some wire in and used a bendy straw to connect to the mask. The actual mask is just a piece of black circular leather with the eye and mouth pieces glued on. The helmet is made from putty were I then got a pock](userimages/customs/29000/28558-1.jpg) Harry Warden Movie Maniacsby j-xI did this custom a couple of years back, after I'd just finished watching the original, I decided to create my own which was funny because one night ...0 comments |
|